AS2 contact form problem help needed

hi all,
long time listener first time caller
basically I have a contact form which is nested inside a
movie clip which in turn is an external swf. The form isnt sending
the desired info to the php form, Ive posted both sets of code so
as you guys can help me out somehow.
Any help on this will be very very very much appreciated and
will bring kudos
thanks
AS2 code here:

i don't see where you're defining your variables that should
be sent to your php file and your php is problematic.
check flashgods.org for sample as2 code that you should use
for sending email from flash using a php script.

Similar Messages

AS2 contact form and php - works fine but only sends half of the text in the comments field ???

hi all - i have an AS2 contact form using php to send the info to my email address - it all works fine except this ..... rather than having an empty comments box in the flash movie i had added a whole bunch of feedback questions that the user can comment yes/no to in the comments box (my feedback questions were added into the input text box in cs3 so are there when the user opens the contact page .. i have set the maximum characters to 10000 so no worries that its that that is stopping it all coming through in the email ..... basically when i go to my form online and send it i get it through as an email but with only three quarters of the feedback text in it ...... i have tried a zillion ways a round this, tried other contact forms and php and always end up with the same problem ... any ideas any one ?
this is the AS....
stop();
a =0;
function validate () {
    if (from.length>=7) {
        if (from.indexOf("@")>0) {
            if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
                if (from.lastIndexOf(".")<(from.length-2)) {
                    a = 1;
                    // email is fine
function formcheck () {
    validate ();
    trace(a);
    if (fname = "" or telno eq "" or comments eq "" or from eq "") {
        stop();
        error = "You have left blank fields, please fill in all fields, thank you";
    } else {
        emailcheck ();
function emailcheck (){
    if (a != 1){
        stop();
        error = "Email address not valid";
        } else {
        loadVariablesNum("mail.php3", 0, "POST");
        gotoAndStop(2);
..........this is the php
<?php
$adminaddress = "[email protected]";
$sitename = "Flash Site Form Mailer";
mail("$adminaddress","Info Request",
"A customer at $sitename has made the following enquiry\n
First Name: $name
Company Name: $company
Telephone: $telno
Email: $from\n
The visitor commented:
$comments
Logged Info :
Using: $HTTP_USER_AGENT
Hostname: $ip
IP address: $REMOTE_ADDR
Date/Time: $date","FROM:$adminaddress");
?>
any help much appreciated

i think you should not use $HTTP_USER_AGENT.
and use loadvars instead of loadvariablesnum:
stop();
a =0;
function validate () {
    if (from.length>=7) {
        if (from.indexOf("@")>0) {
            if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
                if (from.lastIndexOf(".")<(from.length-2)) {
                    a = 1;
                    // email is fine
function formcheck () {
    validate ();
    trace(a);
    if (fname = "" or telno eq "" or comments eq "" or from eq "") {
        stop();
        error = "You have left blank fields, please fill in all fields, thank you";
    } else {
        emailcheck ();
var sendLV:LoadVars=new LoadVars();
function emailcheck (){
    if (a != 1){
        stop();
        error = "Email address not valid";
        } else {
sendLV.name=fname;
sendLV.telno=telno;
sendLV.company=company; //assuming company is a variable in your flash
sendLV.comments=comments;
sendLV.send("mail.php3", "POST");
        gotoAndStop(2);
//..........this is the php
<?php
$adminaddress = "[email protected]";
$sitename = "Flash Site Form Mailer";
$from=?;//you need to define this variable
$name=$_POST['name'];
$telno=$_POST['telno'];
$company=$_POST['company'];
$comments=$_POST['comments'];
$body=
"A customer at $sitename has made the following enquiry\n
First Name: $name
Company Name: $company
Telephone: $telno
Email: $from\n
The visitor commented:
$comments";
mail($adminaddress,"Info Request",$body);
?>

PHP contact form problems

I've tried editing my contact form in a way that I could edit it. But, recently I've tried replacing the color behind my submit button. Instead the images I placed behind the text boxes end up being placed behind the submit button. If you could help me figure this out, that would be great Also if you have the chance, could you tell me how to get rid of the message area boxes' color and change it to transparent... and help me place an image behind it to replace the color. Thanks
<?php
//If the form is submitted
if(isset($_POST['submit'])) {
//Check to make sure that the name field is not empty
if(trim($_POST['contactname']) == '') {
$hasError = true;
} else {
$name = trim($_POST['contactname']);
//Check to make sure that the subject field is not empty
if(trim($_POST['subject']) == '') {
$hasError = true;
} else {
$subject = trim($_POST['subject']);
//Check to make sure sure that a valid email address is submitted
if(trim($_POST['email']) == '') {
$hasError = true;
} else if (!eregi("^[A-Z0-9.%-]@[A-Z0-9.%-].[A-Z]{2,4}$", trim($_POST['email']))) {
$hasError = true;
} else {
$email = trim($_POST['email']);
//Check to make sure comments were entered
if(trim($_POST['message']) == '') {
$hasError = true;
} else {
if(function_exists('stripslashes')) {
$comments = stripslashes(trim($_POST['message']));
} else {
$comments = trim($_POST['message']);
//If there is no error, send the email
if(!isset($hasError)) {
$emailTo = '[email protected]'; //Put your own email address here
$body = "Name: $name
Email: $email
Subject: $subject
Comments:
$comments";
$headers = 'From: Barca Graphics Contact form <'.$emailTo.'>' . "
" . 'Reply-To: ' . $email;
mail($emailTo, $subject, $body, $headers);
$emailSent = true;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title>PHP Contact Form with JQuery Validation</title>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<meta http-equiv="Content-Style-Type" content="text/css" />
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js" type="text/javascript"></script>
<script src="jquery.validate.pack.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function(){
$("#contactform").validate();
</script>
<style type="text/css">
body {
font-family:Arial, Tahoma, sans-serif ;
#contact-wrapper {
width:429px;
border:;
background:transparent ;
padding:;
#contact-wrapper div {
clear:both;
margin:1em 0;
#contact-wrapper label {
display:block;
float:none;
font-size:16px;
width:auto;
form#contactform input {
background-color:transparent;;
background-image:url('http://submitpage.webege.com/images/shapeimage_2.png');
border-width:0px;
padding:6px;
padding-bottom:10px;
font-size:16px;
color:none;
form#contactform textarea {
font-family:Arial, Tahoma, Helvetica, sans-serif;
font-size:100%;
padding:0.6em 0.5em 0.7em;
border-color:transparent;;
border-style:transparent;
border-width:1px;
</style>
</head>
<body>
<form method="post" action="<?php echo $SERVER['PHPSELF']; ?>" id="contactform">
<label for="name"></label>
<input type="text" size="50" name="contactname" id="contactname" value="Name" class="required"/>
<label for="email"></label>
<input type="text" size="50" name="email" id="email" value="Email" />
<label for="subject"></label>
<input type="text" size="50" name="subject" id="subject" value="Subject" />
<label for="message"></label>
<textarea rows="5" cols="50" name="message" id="message" class="required"></textarea>
<input type="submit" value="Send" name="submit" />
</form>
<?php if(isset($hasError)) { //If errors are found ?>
Please check if you've filled all the fields with valid information. Thank you.
<?php } ?>
<?php if(isset($emailSent) && $emailSent == true) { //If email is sent ?>
Email Successfully Sent!
Thank you <?php echo $name;?> for contacting Barca Graphics.
<?php } ?>
</body>
</html>

ereg() has been deprecated, it is recommended that you dont use it.
You want to look at this
http://www.php.net/manual/en/function.preg-match.php
Within this page I found this:
If you need to check for .com.br and .com.au and .uk and all the other crazy domain endings i found the following expression works well if you want to validate an email address. Its quite generous in what it will allow
<?php
        $email_address = "phil.taylor@a_domain.tv";
     if (preg_match("/^[^@]*@[^@]*\.[^@]*$/", $email_address)) {
         return "E-mail address";
?>

April 1 2013 - contact form not sending - need a review of code - see below

i have a html5 responsive design for website - tested out the contact page and the [email protected] email links in the about and at bottom of website in dreamweaver CS5 on my computer and it works - these do not work when tested from iphone or other computer - can you review the code below and provide any soultions to get the email links and the contact page to work?
<div class="space"> </div>
        <div class="clear"> </div>
        <div class="clear"> </div>
      </div>
    </div>
    <div class="page" id="contact">
      
      <h3 class="page_title"> Let's Get Started</h3>
      <div class="page_content">
        <fieldset id="contact_form">
          <div id="msgs"> </div>
          <form id="cform" name="cform" method="post" action="">
            <input name="name" type="text" class="whitetextcontent" id="name" onfocus="if(this.value == 'Full Name*') this.value = ''"
                            onblur="if(this.value == '') this.value = 'Full Name*'" value="Full Name*" />
            <input name="email" type="text" class="whitetextcontent" id="email" onfocus="if(this.value == 'Your Email Address*') this.value = ''"
                            onblur="if(this.value == '') this.value = 'Your Email Address*'" value="Your Email Address*" />
            <input name="subject" type="text" class="whitetextcontent" id="subject" onfocus="if(this.value == 'Subject*') this.value = ''"
                            onblur="if(this.value == '') this.value = 'Subject*'" value="Subject*" />
            <textarea name="message" class="whitetextcontent" id="message" onfocus="if(this.value == 'Your Message*') this.value = ''"
                            onblur="if(this.value == '') this.value = 'Your Message*'">Your Message*</textarea>
            <button id="submit" class="button"> Send Message</button>
          </form>
        </fieldset>
        <div class="clear"> </div>
      </div>
    </div>
    <div class="footer">
      <p><a href="mailto:[email protected]">© 2013 Karen P White Design, LLC</a></p>
    </div>
</div>

greetings everyone -
thank you for your quick replys - i reviewed and did some digging .....
to answer some of your Qs:
J Carp: thanx for noting the blank between""   i found a contact.php file and added "[email protected]" between the "" so it would point to the PHP script that processes the form.
M summers: the forms code is in php for the contact forms subscription. index html for the main page and contact.php for form part
Nancy O - not sure i understand this fully "
"mailto: links only work on devices that have dedicated e-mail software installed on them. If the end user doesn't have e-mail software, the mailto link does nothing.".... "
Best practice is to use a form-to-email processing script that hides your address from robots and has spam prevention built in.
Contact your web host. Many hosts provide scripts on their servers which you can activate through your Admin Panel or by referencing the script in your form's action attribute.
     <form action="path-on-server/form-to-email-script.php">"
BUT it helped me to see that i had to dig and look for other files that needed editing. thanx
i have done testing from different browsers on different computers for the contact form send/submit page and it is working so far.
thank you all for this information - it all has helped. i will be reviewing the email "mailto" href link now to see if that works....
KPW

AS3/PHP Contact Form Problem

I am working on a contact form in my .fla that utilizes php to send user info to my email address. I believe I have all of the files in the correct directories, but it is still unsuccessful. I am not getting any errors in the AS3. Rather, I think the issue is related to the send_email.php file. The swf is hosted at http://stephenpappasphoto.com/ and the page in question is under the "Contact" button.
Here is the AS3:
import flash.utils.Timer;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.MouseEvent;
import flash.net.URLVariables;
import flash.events.TimerEvent;
f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
submitBtn.addEventListener(MouseEvent.CLICK, submit);
resetBtn.addEventListener(MouseEvent.CLICK, reset);
var timer:Timer;
var var_load:URLLoader=new URLLoader;
var URL_request:URLRequest=new URLRequest("send_email.php");
URL_request.method=URLRequestMethod.POST;
function submit(e:MouseEvent):void
    if( f_Name.text == "" || f_Date.text == "" || f_Location.text == "" || f_Email.text== "" || f_Phone.text == "" || f_Budget.text == "" )
        message_status.text = "Please fill up all test fields.";
    else if( !validate_email(f_Email.text) )
        message_status.text = "Please enter a valid email address.";
    else
        message_status.text = "Sending..."    ;
        var email_data:String = "name=" + f_Name.text
                            + "&email=" + f_Email.text
                            + "&message=" + f_Phone.text
                            + "&message=" + f_Location.text
                            + "&message=" + f_Date.text
                            + "&message=" + f_Budget.text;
        var URL_vars:URLVariables = new URLVariables(email_data);
        URL_vars.dataFormat = URLLoaderDataFormat.TEXT;
        URL_request.data = URL_vars;
        var_load.load( URL_request );
        var_load.addEventListener(Event.COMPLETE, receive_response );
function reset(e:MouseEvent):void
    f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
function validate_email(s:String):Boolean
    var p:RegExp = /(\w|[_.\-])+@((\w|-)+\.)+\w{2,4}+/;
    var r:Object = p.exec(s);
    if( r == null )
        return false;
    return true;
function receive_response(e:Event):void
    var loader:URLLoader = URLLoader(e.target);
    var email_status = new URLVariables(loader.data).success;
    if( email_status == "yes" )
        message_status.text= "Thank you for your contact information. I will get back to you shortly.";
        timer = new Timer(500);
        timer.addEventListener(TimerEvent.TIMER, on_timer);
        timer.start();
    else
        message_status.text = "Your message cannot be sent. Please email your information to [email protected]. ";
function on_timer(te:TimerEvent):void
    if( timer.currentCount >= 10)
        f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
        timer.removeEventListener(TimerEvent.TIMER, on_timer);
Here is the send_email.php:
<?php
$f_Name = $_POST['name'];
$f_Date = $_POST['date'];
$f_Location = $_POST['location'];
$f_Email = $_POST['email'];
$f_Phone = $_POST['phone'];
$f_Budget = $_POST['budget'];
if( $f_Name == true )
    $sender = $f_Email;
    $receiver = "[email protected]";
    $client_ip = $_SERVER['REMOTE_ADDR'];
    $email_body = "Name: $f_Name \nEmail: $f_Email \n\nSubject: New Client-$f_Name \n\nDate: $f_Date \n\n$f_Location \n\n   Phone: $f_Phone \n\n    Budget: $f_Budget\n\n    IP: $client_ip \n\n";
    $extra = "From: $sender\r\n" . "Reply-To: $sender \r\n" . "X-Mailer: PHP/" . phpversion();
    if( mail( $receiver, "New Client - $f_Name", $email_body, $extra ) )
        echo "success=yes";
    else
        echo "success=no";
?>
Thank you in advance for any advice.

Try this:
For the actionscript side, my changes are in italics:
import flash.utils.Timer;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.MouseEvent;
import flash.net.URLVariables;
import flash.events.TimerEvent;
f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
submitBtn.addEventListener(MouseEvent.CLICK, submit);
resetBtn.addEventListener(MouseEvent.CLICK, reset);
var timer:Timer;
var var_load:URLLoader=new URLLoader;
var URL_request:URLRequest=new URLRequest("send_email.php");
URL_request.method=URLRequestMethod.POST;
URL_request.data = formVariables;
var_load.addEventListener(Event.COMPLETE, receive_response );
function submit(e:MouseEvent):void
    if( f_Name.text == "" || f_Date.text == "" || f_Location.text == "" || f_Email.text== "" || f_Phone.text == "" || f_Budget.text == "" )
        message_status.text = "Please fill up all test fields.";
    else if( !validate_email(f_Email.text) )
        message_status.text = "Please enter a valid email address.";
    else
        message_status.text = "Sending..."    ;
        formVariables.name = f_Name.text;
        formVariables.email = f_Email.text;
        formVariables.phone = f_Phone.text;
        formVariables.location = f_Location.text;
        formVariables.date = f_Date.text;
        formVariables.budget = f_Budget.text;
        formVariables.subject = "Mail from form...";
        formVariables.recipient = "[email protected]";
        varLoad.load(formVariables);
function reset(e:MouseEvent):void
    f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
function validate_email(s:String):Boolean
    var p:RegExp = /(\w|[_.\-])+@((\w|-)+\.)+\w{2,4}+/;
    var r:Object = p.exec(s);
    if( r == null )
        return false;
    return true;
function receive_response(e:Event):void
    var loader:URLLoader = URLLoader(e.target);
    var email_status = new URLVariables(loader.data).success;
    if( email_status == "yes" )
        message_status.text= "Thank you for your contact information. I will get back to you shortly.";
        timer = new Timer(500);
        timer.addEventListener(TimerEvent.TIMER, on_timer);
        timer.start();
    else
        message_status.text = "Your message cannot be sent. Please email your information to [email protected]. ";
function on_timer(te:TimerEvent):void
    if( timer.currentCount >= 10)
        f_Name.text = f_Date.text = f_Location.text = f_Email.text = f_Phone.text = f_Budget.text = message_status.text = "";
        timer.removeEventListener(TimerEvent.TIMER, on_timer);
The php file that you have should work with this actionscript. The variables that you define in the AS, "name", "email", etc, must match the variables that are used in the php. Try it. It may need some additional tweeks.

PHP Contact Form Problem

Hi all,
I'm trying to use a php Contact form and it's throwing up an error even before I click submit. As a newbie to PHP I don't really know where I am going wrong.
Here's the link to the contact form.
http://www.thesketchcollective.co.uk/clients/form-example/myform1.php
Secondly, I would also like the form to send an email as well as send the info to CSV format. It currently just sends it to a CSV.
Any help would be appreciated.
Cheers
Tom

<?php
if($_POST['formSubmit'] == "Submit")
$errorMessage = "";
if(empty($_POST['formMovie']))
$errorMessage .= "<li>You forgot to enter a movie!</li>";
if(empty($_POST['formName']))
$errorMessage .= "<li>You forgot to enter a name!</li>";
$varMovie = $_POST['formMovie'];
$varName = $_POST['formName'];
if(empty($errorMessage))
$fs = fopen("mydata.csv","a");
fwrite($fs,$varName . ", " . $varMovie . "\n");
fclose($fs);
header("Location: thankyou.html");
exit;
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>My Form</title>
</head>
<body>
<?php
if(!empty($errorMessage))
echo("<p>There was an error with your form:</p>\n");
echo("<ul>" . $errorMessage . "</ul>\n");
?>
<form action="myform1.php" method="post">
<p>
What is your favorite movie?<br>
<input type="text" name="formMovie" maxlength="50" value="<?=$varMovie;?>" />
</p>
<p>
What is your name?<br>
<input type="text" name="formName" maxlength="50" value="<?=$varName;?>" />
</p>
<input type="submit" name="formSubmit" value="Submit" />
</form>
</body>
</html>

Email Contact Form Problem

I have set up a contact form on my website to be e-mailed to an e-mail address I have set up for the site on clicking the "submit" button. I have apparently succeeded in associating the PHP script to the form, as I get the PHP error message every time I click the submit button to show the e-mail has not been sent. Having worked my way down to the simplest of PHP scripts and triple checking all my variable details are matching the names in the HTML, I tried checking with my host Netcetera if there was something I needed to do at their end.
They replied "The form mail should be authenticated with a valid email address and its password. Please use SMTP host as mail.netcetera.co.uk"
I cannot find anyway of doing this directly in Dreamweaver nor any guidance on Adobe on how to do this.
Any ideas?
Gordon (Obviously a newbie)

You should probably check to see if it will even run PHP. Have you created a page with a php extension and if so does it display correctly?
Sometimes the script needs to be in a folder with permissons that allows scripts to run, which you might be able to do with a CPANEL control somewhere or a folder called scripts.
You shouldn't be required to use their script and should be able to write your own (I purchased software to do this, as I don't writ PHP mail processing scripts).
Jim
PS. Another thing that I have come across is that the sending email (from in your script) must actually be an email address. So if you are wanting to send a confirmation email, that address that is sending it to the form filler outer it can't be a junk address. If you can set up an email account for this form, I would suggest [email protected] (with your domain information of course).

Backup doesnt restores my contacts!! Help needed

i have took a backup of my n73 me b4 updating my firmware...
after upgradation i tried to backup my datas using nokia pc suit and the old backup file... everything is perfect. but my contacts are not restored.. I am sure i selected all the options in backup menu*(which includes contacts as well )...
lost all my contacts... help me friends...

Please use Noki to verify if the contacts are backuped correctly (and extract if necessary).
What's the law of the jungle?

Layout Problem, Help Need

I developed one custom Report, which will print on pre print stationary. Really Problem here is when i send to printer it will printer properly on 8/12 By 11 Page, but i don't what is the reason it is not printing on Page after 7 Inch, even i thought i increase layout width it dos't Print after 7 Inch on Page, can i know why it is doing like these, any clue, please let me know.
Report Verions : 6i
Main Section : Width => 8.5
Height => 12.5
Orientation => Portrait
Report Width => 80
Report Height => 90
Your Help Rally appreicate in advance.
Thanks,
Praveen

You may need to contact support and actually show them the report to really solve the problem, but here are a few things to check first:
a) Check the report margins, make sure that they will allow the report body to display past 7".
b) Check that the frames and repeating frames are set to horizontally variable, or expand so that they can grow if required.
Hope this helps,
Danny

Linked lists problem -- help needed

Hello again. I've got yet another problem in my C++ course that stems from my use of a Mac instead of Windows. I'm going to install Parallels so I can get Windows on my MacBook and install Visual Studio this week so that I don't have to deal with these discrepancies anymore, but in the meanwhile, I'm having a problem here that I don't know how to resolve. To be clear, I've spent a lot of time trying to work this out myself, so I'm not just throwing this up here to have you guys do the work for me -- I'm really stuck here, and am coming here as a last resort, so I'll be very, very appreciative for any help that anyone can offer.
In my C++ course, we are on a chapter about linked lists, and the professor has given us a template to make the linked lists work. It comes in three files (a header, a source file, and a main source file). I've made some adjustments -- the original files the professor provided brought up 36 errors and a handful of warnings, but I altered the #include directives and got it down to 2 errors. The problematic part of the code (the part that contains the two errors) is in one of the function definitions, print_list(), in the source file. That function definition is shown below, and I've marked the two statements that have the errors using comments that say exactly what the errors say in my Xcode window under those two statements. If you want to see the entire template, I've pasted the full code from all three files at the bottom of this post, but for now, here is the function definition (in the source file) that contains the part of the code with the errors:
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
As you can see, the problem is with the two statements that contain the 'setw' function. Can anyone help me figure out how to get this template working and get by these two errors? I don't know enough about linked lists to know what I can and can't mess with here to get it working. The professor recommended that I try using 'printf' instead of 'cout' for those two statements, but I don't know how to achieve the same effect (how to do whatever 'setw' does) using 'printf'. Can anyone please help me get this template working? Thank you very, very much.
For reference, here is the full code from all three files that make up the template:
linkedlist.h (header file):
#ifndef LINKED_LINKED_H
#define LINKED_LINKED_H
struct NODE
string name;
int test_grade;
NODE * link;
class Linked_List
public:
Linked_List();
void insert(string n, int score);
void remove(string target);
void print_list();
private:
bool isEmpty();
NODE *FRONT_ptr, *REAR_ptr, *CURSOR, *INSERT, *PREVIOUS_ptr;
#endif
linkedlist.cpp (source file):
#include <iostream>
using namespace std;
#include "linkedlist.h"
LinkedList::LinkedList()
FRONT_ptr = NULL;
REAR_ptr = NULL;
PREVIOUS_ptr = NULL;
CURSOR = NULL;
void Linked_List::insert(string n, int score)
INSERT = new NODE;
if(isEmpty()) // first item in List
// collect information into INSERT NODE
INSERT-> name = n;
// must use strcpy to assign strings
INSERT -> test_grade = score;
INSERT -> link = NULL;
FRONT_ptr = INSERT;
REAR_ptr = INSERT;
else // else what?? When would this happen??
// collect information into INSERT NODE
INSERT-> name = n; // must use strcpy to assign strings
INSERT -> test_grade = score;
REAR_ptr -> link = INSERT;
INSERT -> link = NULL;
REAR_ptr = INSERT;
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
void Linked_List::remove(string target)
// 3 possible places that NODES can be removed from in the Linked List
// FRONT
// MIDDLE
// REAR
// all 3 condition need to be covered and coded
// use Trasversing to find TARGET
PREVIOUS_ptr = NULL;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
if(CURSOR->name == target) // match
{ break; } // function will still continue, CURSOR will
// mark NODE to be removed
else
{ PREVIOUS_ptr = CURSOR; } // PREVIOUS marks what NODE CURSOR is marking
// JUST before CURSOR is about to move to the next NODE
if(CURSOR == NULL) // never found a match
{ return; }
else
// check each condition FRONT, REAR and MIDDLE
if(CURSOR == FRONT_ptr)
// TARGET node was the first in the list
FRONT_ptr = FRONT_ptr -> link; // moves FRONT_ptr up one node
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
}// why no need for PREVIOUS??
else if (CURSOR == REAR_ptr) // TARGET node was the last in the list
{ // will need PREVIOUS for this one
PREVIOUS_ptr -> link = NULL; // since this node will become the last in the list
REAR_ptr = PREVIOUS_ptr; // = REAR_ptr; // moves REAR_ptr into correct position in list
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
else // TARGET node was the middle of the list
{ // will need PREVIOUS also for this one
PREVIOUS_ptr -> link = CURSOR-> link; // moves PREV nodes' link to point where CURSOR nodes' points
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
bool Linked_List::isEmpty()
if ((FRONT_ptr == NULL) && (REAR_ptr == NULL))
{ return true; }
else
{ return false;}
llmain.cpp (main source file):
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
#include "linkedlist.h"
int main()
Linked_List one;
one.insert("Angela", 261);
one.insert("Jack", 20);
one.insert("Peter", 120);
one.insert("Chris", 270);
one.print_list();
one.remove("Jack");
one.print_list();
one.remove("Angela");
one.print_list();
one.remove("Chris");
one.print_list();
return 0;

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

9i Developer suite login problem. help needed ASAP

i installed oracle 9i developer suite, my problem is i can't login. this is the error ora12560: TNS: oracle adapter error.
or
if i put the hostname it displays a no listener error and closes. i tried to create a listener in net configuration assistant, but i can't see it in services.
i'm using windows XP. and not conneted to any machine.
do i need any changes on my window settings?
please help...
thanks
here is my listener.ora
ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraHome)
(PROGRAM = extproc)
tnsnames.ora
TEST.ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.ABC)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)

check your operating system network protocole is TCP/IP is installed if so check is there any problem with these protocoles. this error is encounter generally due operating system network protocoles it is not an oracle error. here is discription.
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors.For further details, turn on tracing and re-execute the operation. Turn off tracing when the operation is complete.

( jrew.exe encounterd problem,help needed )

MY DEARS
I AM FACING A PROBLEM ON MY P4 LAPTOP AND DESKTOP COMPUTOR ON A PRGRAMM ON SURGERY CD ,WHICH ON START UP DIPLAYS MESSAGE ( jrew encountered a problem,needs to close-)
WHAT IS THE SOLUTION .HELP IS APPERECIATED.
MANY REGARDS FOR HELPER.
DR QAMAR

Hi Jamie,
The install log looks fine, but the last entry was September 9th. I suspect the crash is occuring before the new log entries can be made.
Could you please open a new bug report on this over at bugbase.adobe.com? We'll want to get a crash dump so we can try to figure out what might be causing this to happen. You didn't mention what OS you were running, but I found this tech doc on the net that describes how do generate the .dmp file:
Creating Dr. Watson crash dumps
Thanks,
Chris

Multiple problems - help needed please

I've got so many problems that I've completely confused myself. So, if anyone can help….
I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
Very strange, but I assumed the modem was just broken.
I dug out my spare router, being the Netgear DG632.
I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
Resetting the router seemed to solve this.
I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
The MacBook connected to the airport, and all seemed okay….
…However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
However, setting up the AEBS with PPPoE had no success, and the connection was never made.
At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
Can anybody advise me on a solution to fix either router/modem?
I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
Help! (and thanks)

I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
My internet then will sometime start working again but then drop out completely or take an age to load.
The network will then sometimes disappear from the network list and I'm unable to see it at all.
No matter how many time i reset the base station it doesn't make a difference.
I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
I did download a security update recently but im not sure if its that that is causing it
please help me as well as I'm stuck without my network

Basic java problem help needed please

the problem is :
to produce a program which will show membership rates for a golf club..
membership yearly rate new member joining fee
category
full 650 3000
associate 200
ladies 350 2000
under 18 175
new members must pay a joining fee in addition to the yearly rate as shown
full/ladies members also prepay 150
write a program which will enter details of members,calculate and output the total amount each member should pay.
output number of members in each category
the total income for each category....
i need this program to show each category individually...cant do it at all..been at it a week....must be me && and || signs...i think...plz can someone help me as im really stuck now...thank you so much..
import java.util.Scanner;
public class assignmentquestion3 {
public static Scanner key=new Scanner(System.in);
public static void main(String []args){
int fullfee=800,newfullfee=3800,associatefee=200,newla diesfee= 2350,ladiesfee= 350,under18fee = 175;
int selectcat=0;
int reply = 0;
int addmember=0;
int currentfulltotalmem=0,newfulltotalmem=0,associatet otalmem=0,ladiestotalmem=0,under18totalmem=0;
int assoctotalcash=0,ladiestotalcash=0,under18totalcas h=0;
int fullprepay=150;
int ladiesfull=2500;
int completefull = 0;
int ladiescurrent=500;
int under18=175;
//Main introduction screen for the user and selections available. do while loops only allowing numbers 1,2,3 or 4.
do{
do{
System.out.printf("\n\t %90s","********************Membership Rates For The Golf Club********************");
System.out.printf("\n\n %105s","This program will allow users to enter details of members as well as calculating and.");
System.out.printf("\n%106s","outputing the total amount each member should pay. The program allows users to view the");
System.out.printf("\n%106s","total number of members in each category and the total income for each category.");
System.out.printf("\n\n\t %75s","Please select your membership category: ");
System.out.printf("\n\n\t %68s","Please press '1' for FULL");
System.out.printf("\n\n\t %68s","Please press '2' for ASSOCIATE");
System.out.printf("\n\n\t %68s","Please press '3' for LADIES");
System.out.printf("\n\n\t %68s","Please press '4' for UNDER 18");
System.out.printf("\n\n\t %68s","Please enter 1,2,3 or 4: ");
selectcat=key.nextInt();
}while (selectcat>4 || selectcat<1);
do{
System.out.printf("\n\n\t %75s","Are you a Current Member (press 1) or a New Member (press 2): ");
reply=key.nextInt();
}while (reply<1 || reply>2);
//if number '1' for 'FULL' category is selected by the user and reply is 'yes'(1) then new full member fee is shown to user
if (selectcat==1 ||reply==1)
System.out.printf("\n\n\t %68s","CURRENT FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Current full membership fees yearly are "+fullfee+"");
System.out.printf("\n\n\t %68s","Full members must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %72s","The total of this membership is: "+fullfee+"");
currentfulltotalmem=currentfulltotalmem+1;
System.out.printf("\n\n\t %72s","The total number of 'CURRENT FULL MEMBERSHIPS = "+currentfulltotalmem+"");
completefull=completefull+fullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '1' is selected by the user and reply is 'no' (2) then full member fee is shown to user
else if (selectcat==1 &&reply==2)
System.out.printf("\n\n\t %68s","NEW FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Full membership fees yearly are "+newfullfee+"");
newfulltotalmem=newfulltotalmem+1;
System.out.printf("\n\n\t %68s","The total number of 'NEW FULL MEMBERSHIPS = "+newfulltotalmem+"");
completefull=completefull+newfullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '2' is selected by the user then associate member fee is shown to user
if (selectcat==2 &&(reply==1 || reply==2))
System.out.printf("\n\n\t %75s","ASSOCIATE MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","ASSOCIATE membership fees yearly are "+associatefee+"");
associatetotalmem=associatetotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'ASSOCIATE MEMBERSHIPS' WITHIN THE CLUB = "+associatetotalmem+"");
assoctotalcash=assoctotalcash+associatefee;
System.out.printf("\n\n\t %68s","The total amount of income for 'ASSOCIATE MEMBERSHIPS' within the club = "+assoctotalcash+"");
//if number '3' is selected by the user and reply is 'yes' then new ladies member fee is shown to user
if (selectcat==3 &&reply==1)
System.out.printf("\n\n\t %68s","LADIES CURRENT MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Ladies full membership fees yearly are "+ladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiescurrent+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' WITHIN THE CLUB = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiescurrent;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '3' is selected by the user and reply is 'no' then the current ladies member fee is shown to user
else
if (selectcat==3 && reply==2)
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP fees yearly are "+newladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiesfull+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' within the club = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiesfull;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '4' is selected by the user then under 18 member fee is shown to user
else if (selectcat==4 &&(reply==1||reply==2))
System.out.printf("\n\n\t %75s","UNDER 18 MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","UNDER 18 yearly membership fees are "+under18fee+"");}
System.out.printf("\n\n\t %68s","The total of this membership is: "+under18+"");
under18totalmem=under18totalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalmem+"");
under18totalcash=under18totalcash+under18;
System.out.printf("\n\n\t %68s","The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalcash+"");
//allowing user to select '0' to add another member or any other key to exit program
System.out.printf("\n\n\t %68s","Please Press '0' to add another member or any other key to exit.: ");
addmember=key.nextInt();
}while (addmember==0 ||addmember>1);}}
the problem im having is whenever i make the choices 1,2,3,4 (CATEgorys) AND hit 1 or 2(current or new member selections) it brings up more than one category...
for example when i hit 1(Category full) and 1(current member)..it displays this:
Are you a Current Member (press 1) or a New Member (press 2): 1
CURRENT FULL MEMBERSHIP SELECTED
Current full membership fees yearly are 800
Full members must also pre-pay 150 on a card can be used in the club facilities such as bar and shop
The total of this membership is: 800
The total number of 'CURRENT FULL MEMBERSHIPS = 1
The total amount of income for 'FULL MEMBERSHIPS' within the club = 800
The total of this membership is: 175
The total number of 'UNDER 18 MEMBERSHIPS' within the club = 1
The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = 175
Please Press '0' to add another member or any other key to exit.:
under 18 membership as well?...does this for other selections too...is it my arithmetic operators?....my if loops?...

Multi-post [http://forums.sun.com/thread.jspa?threadID=5346248&messageID=10498270#10498270]
And it still doesn't compile.

SQL problem - help needed ASAP!!

Hey guys,
Doing a college project... would really appreciate some help. I am trying to use a variable in the where clause of a select cursor in PL/SQL. The code is this:
procedure results(p_search_entry varchar2, p_search_field varchar2) is
cursor c_results is
select * from physics_b where p_search_field = p_search_entry;
begin
for cv_results in c_results
loop
-- loop through actions
end loop;
The problem is that I don't know how to get the where clause to accept the variable passed into the procedure as the field name. Does anyone know the syntax for this?
Thanks very much!
Niall

This isn't the correct forum for this kind of question. The SQL and PL/SQL forum PL/SQL is probably best.
That said, you can't do what you want that way.
You can do
procedure results (p_search_entry in varchar2)
cursor c_result is
select * fro physics_b where subject=p_search_entry;(assuming subject is a column in physics_b)
You can't use a variable to represent a column directly. You need to build the statement as a string and then use execute immediate.
statement:='select * fro physics_b where '||p_search_field||' = :1';
-- this bit is probably bad syntax.
execute immediate statement using p_search_entry;Look up execute immediate and bind variables

AS2 contact form problem help needed

Similar Messages

Maybe you are looking for