Assigning Navigation Profile to all users

Hello,
We have changed the transations in the Navigation Profile SAPPPMRP00 and we are trying to figure out a way to assign that Navigation Profile to all users so that they don't have to assign the navigation profile individually.
Is there a parameter ID that we can assign to all users that would assign them this Navigation Profile? Is there some other user attribute that we can assign to give them this Navigation Profile?
Thanks for any help,
Dale Dingmann

Hi,
According to my knowledge there is parameter ID to fulfill your requirement.  You can create a new parameter ID. Please follow below link.For better clarity you please post the thread in SAP-SECURITY forum. I hope this will help you.
http://www.wcupa.edu/_INFORMATION/AFA/SAP/Reqs_ParameterID.pdf

Similar Messages

  • In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

    In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

    .Jake. wrote:
    I forgot to say that the hard drive has not been used yet...
    So you have no backup of your data at all?
    Pete

  • Single firefox profile across all users and profiles on networks

    I'm in the process of setting up Firefox as the standard browser for an entire building, and part of this is ensuring that everyone's firefox profiles are saved to personal network drives as opposed to the local machines. I can use the profile manager to do this on a user-to-user basis, but what if I want all the users of any machine to use the same firefox profile that points to a specific network drive? (This will ensure users always have their browser settings and such regardless of where they access them, allow us to switch machines out without losing anyone's browser settings, etc. The contents of this drive are specific to the user account, but always have the same path.)
    As far as I can tell, profiles created in the profile manager are specific to each (domain) user, which would mean an awful lot of manual profile creation. Is there some way to ensure Firefox always uses a specific Firefox profile or path? Is there some way to have firefox check which profiles exist (in a .bat file, for example), so I can create the proper one if needed? Can I use a command line to set which profile to use by default, or can that only be done from the profile manager GUI?
    Finally, and this one may warrant a separate query, but I've found that when using profiles that point to a network drive, trying to open firefox on multiple computers will fail (another instance of firefox is open, close it or restart). Can I tell Firefox to force the old instance closed, or will I have to firefox.exe -no-remote -p "differentProfile" every time?
    We're on Windows 7, by the way, for references' sake.

    We just deploy images, so everyone should have firefox already, but we're pretty good about keeping all data on mapped network drives instead of letting windows save things locally, so I'm trying to find the best way to integrate Firefox in that system as well.
    Every user has a network domain account, which can be accessed from anywhere in the building. While mostly people use their own computers, due to the nature of the place, that is often not the case, and several people will need to sign on to the same machine on a given day.
    If there are command-line ways of checking for firefox profiles, I can have them run in our logon script to ensure everyone always has access to their personal profiles, but I'm not sure the best way to go about that, yet. I suppose that's the main part of my second question--what is the cleanest way to check for and create/map/assign firefox profiles automatically?

  • Use one profile for all user profiles in Server 2012 R2

    Hi
    I am setting up an Windows Server 2012 R2 Template on VMware. 
    I will do som changes with the local admin user, and want all user that will log in to servers made from this Template, get the user profile I have set up for the admin account.
    How to I do that?
    Regards
    StigKSand

    the way I used to do this was to create a new profile the way I wanted with any shortcuts applications etc installed. then I would create another user account on the PC and make it an admin.
    reboot the pc to ensure it hasn't got the pre-configured profile loaded and login with your newly created admin account.
    then right click This PC in windows explorer and select properties, then select advanced system settings, and select user profiles on the advanced tab. You can then select the profile you made all the configuration to, and click copy and then select default
    profile.
    this should then mean any new users who login get this default profile on this server.
    hopefully that is what you were referring to.
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • Assigning a profile to a user

    I have just created a new user in the datbase and granted connnect, resource privileges. I created another user and assigned DBA role. I'm able to use both the users without any issues to log into the database.
    In this above context, why would I need to create a profile and assign it to a user ? Secondly, how do we create a profile?
    Thanks
    Gony

    goni wrote:
    I have just created a new user in the datbase and granted connnect, resource privileges. I created another user and assigned DBA role. I'm able to use both the users without any issues to log into the database. What you have done is just assigning the user some privs. Both the connect and dba roles contains the create session priv that's why you are able to connect. This has nothing to do with the profiles.
    In this above context, why would I need to create a profile and assign it to a user ? Secondly, how do we create a profile?As I said, the above doesn't involve profiles. Profile is a low level mechanism to support/control resource consumptions of a user, for example how a user can be doing work, how long he can sit idle, how many sessions he can open and so on? This surely would help in a better control of the rsource usage. Each user is given a Default profile by default. Other than that, you can create your own profile and can assign like the following,
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    SQL> conn aman/aman
    Connected.
    SQL> create profile user_prof limit
      2  sessions_per_user 1;
    Profile created.
    SQL>
    SQL> alter user  new_user  profile user_prof;
    User altered.
    SQL>Update:
    For more reading about Profiles, please read the following link,
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/security.htm#CNCPT1571
    HTH
    Aman....
    a
    Edited by: Aman.... on Jul 12, 2009 10:26 AM added doc link

  • How do I create a default profile for all users of a computer in Windows 7/Vista for Firefox versions above 8? I'd like all new users on a computer to get the same defaults, bookmarks, homepage, etc...

    I have found help for this on older versions of Firefox, but I can't seem to find anything for the latest versions above 8. There must be someway to accomplish this for imaging on a large scale.

    You can create a defaults\profile template folder in the Firefox program folder for new profiles the same way as in older versions. That folder only isn't there anymore because all files have been moved to the omni.ja(r) archive, so you need to create it yourself.

  • How to create a default profile for all users in Firefox 9.

    I run a computer lab, and am looking for a way to create a default profile in Firefox 9 that new users can use. I want them to be able to launch Firefox for the first time, and see my homepage. I want to disable any check for default browsers, firstrun pages, or any other prompts.
    The old .adm files for group policy don't seen to be working any longer.

    See http://www.frontmotion.com/Firefox/howtodeploy.htm
    You can create a defaults\profile folder in the Firefox program folder and place files in it to be used to create and initialize a new profile.

  • Firefox 3.6.10 crashes when I open it, even after uninstalling, deleting the default profile and all user appdata folders.

    Firefox was working fine, but recently it's just stopped working. It instantly comes up with the error message 'Firefox Has Stopped Working'. I have pasted the error message below
    Problem signature:
    Problem Event Name: BEX
    Application Name: firefox.exe
    Application Version: 1.9.2.3909
    Application Timestamp: 4c8fdcc5
    Fault Module Name: StackHash_8228
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 8a101e70
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 2057
    Additional Information 1: 8228
    Additional Information 2: 8228e43d426cfb63ad023de96d440ede
    Additional Information 3: 1853
    Additional Information 4: 1853d009ebe0b1df5f24e024bd05eb79
    I really have no idea why this is happening. I have a feeling it may be some sort of virus or malware but i've done scans and nothing has come up. Internet Explorer is working fine. I'm on Windows 7.

    This can happen if adware  Genieo is installed without your knowledge. Removing it will help,
    1. Download and use free AdwareMedic to remove the adware
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.
    Note:
      If you don’t have another browser installed,
    startup into SafeMode, log into your account
    and download  AdwareMedic or the removal instructions from Apple.
    Follow these steps to start up into Safe Mode.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup sound, press and hold the Shift key. The Shift key should be pressed as soon as possible after startup, but not before the startup sound.
    Release the Shift key when you see the Apple logo appear on the screen.
    After the Apple logo appears, it may take longer than usual to reach the login screen. This is because your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without pressing any keys during startup.
    Source:    http://support.apple.com/en-us/HT203987

  • How to make custom icc color profile work as default for all users?

    Hi!
    I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
    Is there a specific place I have to put custom icc profile to make it system default?
    Thank you!

    If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • Import of Navigation Profile of COOIS

    Hello Masters,
    I have created Navigation Profile under COOIS in client where order data is available as explained under example heading at  "http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/c04942da51690de10000000a155106/frameset.htm".
    As mentioned in above link, I tried import option in customising client via the transaction "NAVP_MANAGE" as well as through COOIS. In transaction "NAVP_MANAGE", I didn't get any value for import and in COOIS there was no list generation as there was no data in system.
    So, the problem is as I was unable to import Navigation Profile into customising client from client with appication data (both clients are in same system), I can't move forward to include this into transport request.
    Any input on import or transportation of Navigation Profile will be be helpful.
    Thank you in anticipation.
    Best regards,
    Devang

    You might be using the program name as PPIO_ENTRY but SAP doesn't store navigation profile for that program because it has different type of navigation profiles for different type of report executions like Order Header, Component list, Item list, Operation list.
    The Navigation profiles are stored in table NAVP_PROFILE use SE16N to look up it's entries, there you can see all the navigation profiles (for all the programs, both user specific and global). User specific profiles have username in username field.
    For example if you have created navi profile for COHV/COOIS Order headers then the program name would be PPIOH000; Order components would be PPIOM000 etc...
    Use them program names in TCode: NAVP_MANAGE

  • How to make all users have the same working environment?

    Hi guys,
    thanks for helping out on this issue.
    Is there a way to set all users on your system to have the same working environment? I believe, as root you can edit the /etc/profile. But when I looked at the file, I was confused. I had no idea where to add stuff because it was a script.
    Please if anyone can help me explain how to customize system wide working environments, I will be very grateful .
    Thank you
    Arrey

    Hi.
    It's not clear what you understand under system wide working environments ?
    /etc/profile it's one possible solution.
    Another way - put custimozed .profile to all users and use customezed */etc/skel* for new users.
    Regards.

  • Assign PP/DS Alerts to Users (Alerts Monitor)

    HI Gurus,
    I have configured Overall Profiles for Alert Determination in the Background using PP/DS alerts. Is there a way i can automaticall assign this alert to other users? Or the users should just assign it to themselves?
    Thanks in advance!
    Nap

    In /SAPAPO/AMON1 - Alert Monitor  click on Favourite Management.
    Select the user from Favorites for User and than assign alert profile according to user role.
    Hope you have activated alert in IMG : Alert Monitor->Activate/Deactivate Applications in Alert Monitor.
    Alerts are shown in interactive planning (/SAPAPO/SDP94) but not in alert monitor standalone (/SAPAPO/AMON1): In interactive planning, whatever what selection profile you use to load the data in the planning book, the alerts are found since the system considers just the data as loaded in the planning book. However, in alert monitor standalone, the selection id defined in the alert profile plays a big role. The alerts will be shown depending on the objects defined in the selection id and the aggregation level defined in the job when generating the DB alerts. For instance, in case of resource, it is strictly necessary to use a selection id that has resources only. If the selection id contains also locations for instance, the system tries to find alerts linked to the location resource for which for which there are none because the alerts are on the resource level only.
    Alerts are generated but cannot be displayed in ALV grid: Check if there is a filter criterium in the layout which doesn't match with the existing alerts.
    By scheduling the program /SAPAPO/READ_ALERTS_BATCH , you can determine and save dynamic & existing DB  alert situations.
    Configuring Overall Profiles for Alert Determination in the Background  to use above program to generate alert.
    transaction /SAPAPO/AMON_SETTING) go in menu bar -> Goto -> Alert Determination in the Background
    Hope it will be helpful to you .
    Manish

  • Disable pop-up blocker globally (for all users) in FF 30+

    Hello,
    I cannot find the correct settings to disable pop-up blocker globally. I have some internal web apps that are using pop-ups to display certain information. By default FF is blocking all. Although it is indicating that pop-up was blocked many users do not notice the notification. I need to disable globally the pop-up blocker once for all, so users on particular computers can access the data without such problems. What is the about:config setting for that?
    best regards
    salata

    thanks,
    but is i set privacy.popups.policy to 0 on administrator profile will that affect profiles of all users using same machine? I have impression only administrator will be affected by this change.
    regards
    salata

  • Adobe Soundbooth CS5 (3.0) settings for all users

    hello,
    We use Adobe Soundbooth CS5 (3.0) on a Windows 7 x86 Pc.
    I want to setup a default profile for all users who logon to the PC
    Want to change Media Chach Files Location
    And
    Media Cache database location
    Want to set it up for all users to C:\temp
    How can i do that ?

    hello,
    We use Adobe Soundbooth CS5 (3.0) on a Windows 7 x86 Pc.
    I want to setup a default profile for all users who logon to the PC
    Want to change Media Chach Files Location
    And
    Media Cache database location
    Want to set it up for all users to C:\temp
    How can i do that ?

Maybe you are looking for