Association must have both source and destination ends.

I am getting this error when trying to developer Oracle Applications framework page using ICX and FND information. I am trying to find out if there is something missing. I don't see an assocation that is missing a source or destination.

{forum:id=210}

Similar Messages

  • Each target assigned to a job must have a setting and destination.

    Simple. Basic Question.
    Trying to use Compressor to change the codec on my flip cam to make it more compatible with FCP X.
    I have dragged a source and destination into the batch. But it keeps giving me the error "Each target assigned to a job must have a setting and destination." I saw others had this same issue and the solution I saw was to set a destination for the video AND audio. How do you assign for BOTH? I thought it was just a drag and drop method into batch ... 

    You didn't say what your settings were. But tif it's not one of the DVD presets, you shouldn't ordinarily be faced with separate audio and video streams with the majority of presets. Here's an example of a batch with one source file, multiple targets and multiple destinations. Only the DVD Preset has separate audio and video…and those do require that destinations be specified. If the destination is not specified, it defaults to Source.
    Good luck.
    Russ

  • Mapping with both source and destination as flat files???

    hi I have two two flat files(large data) for example A and B.
    let us say
    A has records of format( characteres of size(5) , numbers of size(6) , characteres of size(5) )
    B has records of format( characteres of size(5) , numbers of size(6) )
    i have to map these flat files so that rocords with numbers in both files should be added where the records of characters in both files are same) and output a flat file C .
    i.e
    A(aaaaa111111bbbbb222222ccccc111111
    bbbbb111111fffff666666ddddd333333)
    B (aaaaa222222)
    output should be(aaaaa333333)
    i have created the flat file module and could able to sample A and B .
    I have also created an external table based on A and B.but the data is not been showed ih the external table.How to map this.
    Pls guide me.
    srry for being long here.
    Thanks 4 ur time.

    Sounds like your datatypes/settings are incorrect.
    To process a file (let's call it stuff.txt) with fixed length records such as the following...
    aaaaa111111bbbbb222222ccccc111111bbbbb111111fffff666666ddddd
    Here is an example tcl script. There are some variables you have to setup for the flat file module, the oracle module, the File location and project name all of which should exist before running. It will create the flat file, external table, a simple mapping from external table to flat file defined by tcl variable target_file (in same directory as the LOC_SRC_FILES, you can change this..its just for demo purposes and will write a comma separated file). Hopefully this will get you up and going with your problem...
    # Create the modules etc and set the values below, then run
    set project MY_PROJECT
    set ff_module FF
    set ff_location LOC_SRC_FILES
    set ora_module MM
    set target_file my_target_file
    OMBCC '/$OMB_CURRENT_PROJECT'
    OMBDCC
    OMBCC '$ff_module'
    OMBCREATE FLAT_FILE 'FSTUFF' SET PROPERTIES (DATA_FILE_NAME,IS_DELIMITED, RECORD_LENGTH) VALUES ('stuff.txt',0, '16') ADD RECORD 'FSTUFF'
    OMBALTER FLAT_FILE 'FSTUFF' MODIFY RECORD 'FSTUFF' ADD FIELD 'FIELDA' SET PROPERTIES (DATATYPE,START_POSITION,END_POSITION,MAXIMUM_LENGTH) VALUES ('CHAR',1,5,5)
    OMBALTER FLAT_FILE 'FSTUFF' MODIFY RECORD 'FSTUFF' ADD FIELD 'FIELDB' SET PROPERTIES (DATATYPE,START_POSITION,END_POSITION,MAXIMUM_LENGTH) VALUES ('DECIMAL EXTERNAL',6,11,6)
    OMBALTER FLAT_FILE 'FSTUFF' MODIFY RECORD 'FSTUFF' ADD FIELD 'FIELDC' SET PROPERTIES (DATATYPE,START_POSITION,END_POSITION,MAXIMUM_LENGTH) VALUES ('CHAR',12,16,5)
    OMBCC '../$ora_module'
    OMBCREATE EXTERNAL_TABLE 'FSTUFF_EXT' SET PROPERTIES(LOAD_NULLS_WHEN_MISSING_VALUES,TRIM) VALUES (1, 'RIGHT') SET REFERENCE RECORD 'FSTUFF' OF FLAT_FILE '../$ff_module/FSTUFF' DEFAULT_LOCATION '$ff_location'
    OMBCREATE MAPPING 'FILE_TO_FILE'
    OMBALTER MAPPING 'FILE_TO_FILE' ADD EXTERNAL_TABLE OPERATOR 'SOURCE_STUFF' BOUND TO EXTERNAL_TABLE 'FSTUFF_EXT'
    OMBALTER MAPPING 'FILE_TO_FILE' ADD FLAT_FILE OPERATOR 'TARGET_FILE'
    OMBALTER MAPPING 'FILE_TO_FILE' ADD CONNECTION FROM GROUP 'OUTGRP1' OF OPERATOR 'SOURCE_STUFF' TO GROUP 'INOUTGRP1' OF OPERATOR 'TARGET_FILE'
    OMBALTER MAPPING 'FILE_TO_FILE' SET PROPERTIES (GENERATION_LANGUAGE) VALUES ('PLSQL')
    OMBALTER MAPPING 'FILE_TO_FILE' MODIFY OPERATOR 'TARGET_FILE' SET PROPERTIES (TARGET_DATA_FILE_NAME) VALUES ('$target_file')
    OMBALTER MAPPING 'FILE_TO_FILE' MODIFY OPERATOR 'TARGET_FILE' SET PROPERTIES (TARGET_DATA_FILE_LOCATION) VALUES ('$ff_location')
    You can do all this in the UI, just thought it would be useful as a script for you.
    Cheers
    David

  • Can I have both Lion and Snow Leopard on One Hard Drive?

    My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

    How To Run Snow Leopard On A New Mac
    This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
    What has to be done:
    Create a new partition on the hard drive.
    Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
    Step One: Create a new partition on the hard drive
    To resize the drive and create a new partition do the following:
    1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
           After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    Step Two: Obtain a clone of a Snow Leopard system:
    You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
    Option One:
    Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
    Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
              Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the new partition on the internal drive. Source means the USB flash drive.
    Option Two:
    If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
              Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
    After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
              Restore the clone using Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the new partition on the internal drive. Source means the external drive.
    If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

  • Could nt complete your request because source and destination files are the same

    Hi, thank you for reading.
    I'm having this problem and it's driving me nuts.
    I'm actually following a tutorial that you can check out here: http://nightshifted.tumblr.com/post/2559360661/tutorial-paused-animations
    basically I'm trying to do a animated gif with canvas (I'm sorry if my english is not so great). when I try to drag the layers into the canvas (step 2 of the tutorial), I get the error: "could not complete your request because source and destination are the same".
    can anybody help me? I have both CS3 and CS5 and they the error appears in both.
    thank you in advanced

    I think they mean select the layers and frames and using the move tool, drag
    inside the document (click inside the document window and drag) to move the
    selected layers to the top half  (transparent area), not to drag the layers from
    the layers palette into the document, which would give that error.
    MTSTUNER

  • Dynamic source and destination tables

    Hi all
    I've got to import 142 tables from csv into SQL 2008 on a regular basis.
    I was looking at building a 142-part SSIS package to do this, then thought there must be a dynamic way of doing it.
    Is there any way of dynamically changing the source and and destination tables?
    The csv filenames will remain identical, the SQL tables will be the same names but with "_Staging" at the end of them (e.g. SRSection.csv will always go into SRSection_Staging).
    I can then write MERGE statements to update the main tables from the staging data.
    Any help on this would be greatly appreciated.
    I get the the feeling I would need a FOREACH LOOP container but I'd really aprreciate a step-by-step guide if you can.

    Please check this :- http://sql-bi-dev.blogspot.com/2010/07/dynamic-database-connection-using-ssis.html  
    STEP1:
    To begin, Create two tables as shown below in on of the environment:
    -- Table to store list of Sources
    CREATE TABLE SourceList (
       ID [smallint],
       ServerName [varchar](128),
       DatabaseName [varchar](128),
       TableName [varchar](128),
       ConnString [nvarchar](255)
    GO
    -- Local Table to store Results
    CREATE TABLE Results(
       TableName  [varchar](128),
       ConnString [nvarchar](255),
       RecordCount[int],
       ActionTime [datetime]
    GO
    STEP 2:
    Insert all connection strings in SourceList table using below script:
    INSERT INTO SourceList
    SELECT 1 ID,
    '(local)' ServerName,
    --Define required Server
    'TestHN' DatabaseName,--Define DB Name
    'TestTable' TableName,
    'Data Source=(local);Initial Catalog=TestHN;Provider=SQLNCLI10.1;Integrated Security=SSPI;Auto Translate=False;' ConnString
    Insert as many connections as you want.
    STEP 3:
    Add new package in your project and rename it with ForEachLoopMultipleServers.dtsx. Add following variable:
    Variable
    Type
    Value
    Purpose
    ConnString
    String
    Data Source=(local);
    Initial Catalog=TestHN;
    Provider=SQLNCLI10.1;
    Integrated Security=SSPI;
    Auto Translate=False;
    To store default connection string
    Query
    String
    SELECT '' TableName,
    N'' ConnString,
    0 RecordCount,
    GETDATE() ActionTime
    Default SQL Query string.
    This can be modified at runtime based on other variables
    SourceList
    Object
    System.Object
    To store the list of connection strings
    SourceTable
    String
    Any Table Name.
    It can be blank.
    To store the table name of current connection string.
    This table will be queried at run time
    STEP 4:
    Create two connection managers as shown below:
    Local.TestHN: For local database which has table SourceList. Also this will be used to store the result in Results table.
    DynamicConnection: This connection will be used for setting up dynamic connection with multiple servers.
    Now click on DynamicConnection in connection manager and click on ellipse to set up dynamic connection string. Map connection String with variable
    User::ConnString.
    STEP 5:
    Drag and drop Execute SQL Task and rename with "Execute SQL Task - Get List of Connection Strings". Now click on properties and set following values as shown in snapshot:
    Result Set: Full Result Set
    Connection: Local.TestHN
    ConnectionType: Direct Input
    SQL Statement: SELECT ConnString,TableName FROM SourceList
    Now click on Result Set to store the result of SQL Task in variable User::SourceList.
    STEP 6:
    Drag and drop ForEach Loop container from toolbox and rename with "Foreach Loop Container - DB Tables". Double click on ForEach Loop container to open Foreach Loop Editor. Click on Collection  and select
    Foreach ADO Enumerator as Enumerator. In Enumerator configuration, select User::SourceList as ADO object source variable as shown below:
    STEP 7: Drag and drop Script Task inside ForEach Loop container and double click on it to open Script Task Editor. Select
    User::ConnString,User::SourceTable as
    ReadOnlyVariables and User::Query as
    ReadWriteVariables. Now click on Edit Script button and write following code in Main function:
    public void Main()
    try
    String Table = Dts.Variables["User::SourceTable"].Value.ToString();
    String ConnString = Dts.Variables["User::ConnString"].Value.ToString();
    MessageBox.Show("SourceTable = " + Table +
    "\nCurrentConnString = " + ConnString);
    //SELECT '' TableName,N'' ConnString,0 RecordCount,GETDATE() ActionTime
    string SQL = "SELECT '" + Table +
    "' AS TableName, N'" + ConnString +
    "' AS ConnString, COUNT (*) AS RecordCount, GETDATE() AS ActionTime FROM " + Dts.Variables["User::SourceTable"].Value.ToString() +
    " (NOLOCK)";
          Dts.Variables["User::Query"].Value = SQL;
          Dts.TaskResult = (int)ScriptResults.Success;
    catch (Exception e)
          Dts.Log(e.Message, 0,
    null);
    STEP 8:
    Drag and drop Data Flow Task and double click on it to open Data Flow tab. Add OLE DB Source and Destination. Double click on OLE DB Source to configure the properties. Select
    DynamicConnection as OLE DB connection manager and
    SQL command from variable as Data access mode. Select variable name as User::Query. Now click on
    columns to genertae meta data.
    Double click on OLE DB Destination to configure the properties. Select Local.TestHN as
    OLE DB connection manager and Table or view - fast load as
    Data access mode. Select [dbo].[Results] as Name of the table or the view. now click on
    Mappings to map the columns from source. Click OK and save changes.
    Finally DFT will look like below snapshot:
    STEP 9: We are done with package development and its time to test the package.
    Right click on the package in Solution Explorer and select execute. The message box will display you the current connection string.
     Once you click OK, it will execute Data Flow Task and load the record count in Results table. This will be iterative process untill all the connection are done. Finally package will execute successfully.
    You can check the data in results table:
    Here is the result:
    SELECT *
    FROM SourceList
    SELECT *
    FROM Results
    Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

  • Query SQL code gets deleted after export to Excel. "Query must have at least one destination field"

    Hi all,
    I'm getting really frustrated by this Access error. It happens when I export the result of a query through an Access macro to Excel, the first time it runs well but the next time, there is a chance that the query won't run and the error "Query
    must have at least one destination field" will be displayed. After that, I try to check the query SQL code and discover the code has vanished. I'm using simple Select query without joins, only "where", "group by" and "order by"
    statements.
    Thank you in advance for your help,
    Jesus 
    Edit:
    One of these queries are like the following (all of them are of this type):
    SELECT Field1, field2, field3, field4, field5, Sum(Field6) AS SumOfField6, Sum(Field7) AS SumOfField7
    FROM Table1
    WHERE Field6 is not null
    GROUP BY Field1, field2, field3, field4, field5
    Order By Sum(Field6) desc

    Hi Peter, 
    Thank you for your response, I updated the original question with one of the codes.
    Thanks,
    Jesus

  • How to keep sort order in Shuttle item's source and destination boxes?

    I have defined a shuttle item on a page and the list of values in the source box is populated by a SQL with sort order specified. In the Settings of the shuttle item, Show Controls value is set to Moving Only instead of All. When a user moves selected values from the source box to the destination box or vice versa, the list of values does not maintain the original sort order. For example, if I have 26 values A through Z, a user can put value Z before A in the destination box. And when a user move A from the destination box to the source box, A is the last item in the source box. The reset button clears everything in the destination box and resets the source box to the original sorted list. This is not the solution that I am looking for. I would like to see the items in the source and destination boxes to maintain their original sort order all the time.
    Is it possible?
    APEX v4.0.1.00.03
    Oracle 11g (v11.2.0.1.0)

    Hi,
    See if this post help
    Re: Sort Shuttle Right
    Regards,
    Jari

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Dbms_lob.getlength() returns different source and destination lengths

    I am fairly new to PL/SQL so maybe this is an obvious problem but here goes. I am updating a clob field with a text file ~5KB in size. The field updates fine (as far as I can tell). Before I update the field, I open the source file as a bfile and then inquire the length using dbms_lob.getlength(). I then update the clob field using dbms_lob.loadclobfromfile(). This seems to work fine. However, when I use dbms_lob.getlength() on the destination object returned by dbms_lob.loadclobfromfile(), I get a length 3 characters less than then the source object (5072 vs 5075). Both the source and destination offsets are set to 1.
    Probing on what documentation I could find, I found this at http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_lob.htm#i998484:
    "The length returned for a BFILE includes the EOF, if it exists. Any 0-byte or space filler in the LOB caused by previous ERASE or WRITE operations is also included in the length count. The length of an empty internal LOB is 0."
    I did not create the source file and I believe it is a Unix type file (because of the lack of CRs) and I am running on Windows 7. I am also using 11g Express. Could the use of a Unix-type file for a CLOB on a Windows system be causing this character count difference?
    Once I found this issue I can work around it. I just want to understand what is going on.
    Thanks to all who look at this.

    The EOF and the LF versus CR/LF could influence the count difference, yes.
    Another explain could possibly be character set conversions. The BFILE I believe counts bytes, a CLOB would count "characters" - so if the source happens to contain a few multibyte characters (UTF), then the byte count would be larger than the character count.
    To help you find the cause for your exact file, then I can suggest a couple of things you might do to explore the issue:
    <li>Load the file into a BLOB instead of a CLOB and see what getlength() returns for the BLOB. BLOBs would also do byte counts and not try to treat the source as text.
    <li>Save the CLOB back into the filesystem and compare the original file with the exported CLOB and check the differences with some filecompare tool.

  • Have BOTH .m4a and .m4p versions of same purchased songs after re-import

    Hello,
    I recently had to reconstruct my iTunes library (new machine, new installation) and so I did an "Add to Library" of my library folder into an empty iTunes library. After import, I've discovered that for about 215 songs which I've purchased from the iTunes Store, I have both .m4a and .m4p versions of each of these songs. If I view the "Kind" of each song within iTunes, the .m4a shows a "Kind" of "Purchased AAC Audio File", and the .m4p version shows a "Kind" of "Protected AAC Audio File". If I show the Bitrate, each copy of each song is the same, 256 Kbps. If I view each song file in the Finder, the .m4a is about double the size of the .m4p. I have a few questions surrounding this:
    1. Why are the sizes of the song files so drastically different?
    2. Some time ago I took advantage of that DRM-free promotion, so I am suspecting that this may have had something to do with me having both protected and non-protected copies of these files. However, I am curious why both files now show in my library, whereas before, they did not -- only one copy showed. Does anyone know why both song copies are now showing?
    3. Should I keep both of these files?
    4. Is there a way to manage these files in iTunes so that only one copy shows? They both show when duplicates are hidden, because they are different, or iTunes doesn't know of the association I suppose. But of course that messes up trying to play an album -- every song plays twice.
    Thanks in advance for your answers.
    Brad

    No--nothing gets deleted when you convert. You get two copies of the song in your library. (On Edit: I haven't done this with the latest version of iTunes. I assume nothing gets deleted just like before. To check--maybe you should convert ONE song and see if you get a duplicate in a smaller version, or just a smaller version! I've always gotten duplicates!)
    I did leave out a few steps on how I do this--but if you're interested here's how I do it. Make the playlist. Then go to Edit>Select All. Then I go back to the top line: Advanced>Convert Selection to AAC. (To be able to do this you have to have your import option set to AAC 128 kps under the advanced tab in your Preferences settings. After you do the conversion make sure you set this tab back to your preferred lossless import option!)
    You will get two copies of the songs in your library. Your original playlist will contain the lossless songs, so you'll have to pull the AAC songs back out into a play list. You can find them easily by sorting your library by "Kind" and then pulling the AAC files into a playlist. You can label this iPhone--or whatever.
    After you load the playlist onto your iPhone, uncheck it so the songs are not duplicated in your library. If you ever want to delete them, you have to do this inside your library or the file will remain on your computer. (It does take a while to run the conversion--so I rarely delete things afterwards if I think I'm going to use the file again.)
    Post back if you still have other questions.

  • HPCM custom driver use source and destination

    Hi All,
    I'm using HPCM 12.1.2, I need your help to create one custom driver that uses information from source and destination. I need to use 1 dimension of source and 2 of destination.
    I have the situation bellow:
    STAGE1 (SOURCE)
    Dim1 Machine
    Dim2 Account
    STAGE2 (DESTINATION)
    Dim1 Process
    Dim2 Operation
    Dim 3 Account
    Measure: Time used in the Machine
    The infromation is extracted:
    Machine1 - Process1 - Operation1 = 10 Hours
    Machine1 - Process1 - Operation2 = 9 Hours
    Machine2 - Process1 - Operation1 = 13 Hours
    How can I create one Driver that I could use these informations? It is possible?
    Thanks in Advance
    Diogo
    Edited by: user10432898 on 15/05/2012 14:21

    Hi Alex,
    You have to increase the Max Row size limit in Xcelsius.
    Goto >> File menu >> Preferences >> Increase the "Max Row Sixe"  by default it will be 500 you can increase it as per the requirement.
    Regards,
    AnjaniKumar C.A.

  • I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

    I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15  years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

    Hi bookchic
    Thanks for your feedback.
    Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
    For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
    If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
    Kind regards
    Bev

  • All listing element must have index,name and value?

    when i trying to convert a fmb file to xml, it shows a warning.
    All listing element must have index,name and value...
    how to resolve this..
    Edited by: skud on Mar 9, 2011 6:03 AM

    when i trying to convert a fmb file to xml, it shows a warning.
    All listing element must have index,name and value...
    how to resolve this..
    Edited by: skud on Mar 9, 2011 6:03 AM

  • Can we have both 9i and 10g db running on the same machine

    Hi,
    I want to to exp/imp upgrade of my 9i db to 10g db.
    Can I have both 10g and 9i installed on the same server?
    Thanks,
    Kavitha

    Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
    Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
    However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
    Hemant K Chitale
    Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

Maybe you are looking for