AST 1.5.3 is not working from mid 2010 to early model, AST 1.5.3 is not working from mid 2010 to early model
Sir,
I have updated my AST 1.5.3 but unable to login through netboot in 2010 to 2012 model.older version have using.kindly help me?what shall i do.
My server os is 10.6.3 & AST ver 1.5.3.
Dear sir,
Here the AST means Apple Service Toolkit (1.5.3), this tools is not properly run from Early 2011 to new model 2012/13.My AST version was before 1.5.2 but have updated to the new version 1.5.3.After updating it was not run properly.I have reinstall 10.6.3 server os & installed AST from 1.4 to 1.5.3 with os update 8,9,10,11.
Please give me the help how would be run properly & the setup assistance step.Because i am unable to login neboot through those model.
Rgds,
Dipankar
Similar Messages
-
Auto-generated links exported from InDesign do not work in tablet apps
Hyperlinks automatically detected and exported from InDesign CS6 8.0.1 as a PDF work fine on the desktop version of Acrobat Reader. However, on the iPad version of Adobe Reader as well as iBooks and GoodReader, these links are completely ignored, meaning they are just text.
On the other hand, if I was to manually set the hyperlink in InDesign or Acrobat, the link works fine.
It would be extremely tedious and time consuming to manually reset hundreds of hyperlinks in my documents since InDesign use to handle this correctly.
Is this a bug? If so, it's pretty serious and should be Adobe's priority to fix since millions of people read documents on tablet devices.No, it's a Feature of Acrobat and reader that they attempt to create links from anything that "looks like" a URL. Other readers lack the feature.
It's not good practice to depend on this in any case as it's hardly foolproof even in Acrobat. Links that break across lines, for example, will not be properly recognized. -
Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.
Sorry, I meant the letters look "faded" not faed.
-
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input
Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.No cross posting
Read the "Rules of Engagament"
Regards
Juan -
I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .
I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2). -
A few years ago or so i bought Aperture and Photoshop (the whole kit and caboodle) from a university subsidized store (my husband worked there and buying programs like those two, the whole Microsoft office Suite, all kinds of things) at a very significant discount, i think we paid 25$ for Photoshop vs the 400$ it was selling for on the open market.
Yesterday i upgraded most of my laptops to Yosemite (one of them I'm sure was the one that had Aperture on it, a 17in MacBookPro, its about 2 years old now, but at the time i bought it it was the highest computer apple had on the regular floor, I'm sure i could have added some stuff to customize it for extra, but basically we are talking top of the line computer. I recently just required a 2012 MackBook Air with also fairly heavy specs from a family member that was upgrading (I'm not sure why, i know they couldn't possibly be using this thing for anything beyond its capacity, its basically new, and they aren't 3D animation rendering and needed a "quicker" one).
I was very happy with the upgrade, and now it does work much more seamlessly with my iPads and my iPhone, but the whole reason i uploaded it was to work on pictures, adjust them, change the size and then print them out to include in jewelry, and Yosemite won't let me use Aperture at all, when i click to upgrade it (in the bar all it has basically old icon with a (no sign or ghost busters like sign over it) i click on it and it says, you did not buy this with your apple account name and i could not upgrade it. But it just made me click ok, and did not give me any info on how to upgrade it. i do physically own it, or my husband does, I'm not sure to whom it is registered, but sholdnt i still make it able to work with this new operating system, even if not through regular "software updates" it used to always be asking me to upgrade "word" and i got that in the same way, so what is the issue and what do i do to get it to work on this new system?Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
I don't want my surfing to tracked from site to site.
Some sites require cookies be turned on in order to access the data I want or to perform a transaction.
Right now, I have Firefox set to not accept cookies until I run into a site that requires cookies be accepted.
Once I need to turn cookies on, I return to "Options" and select accept cookies but not 3rd party cookies.
I will then be surfing along and occasionally check what cookies have been placed. There may be several placed I did not know were placed. I assume my surfing has been being tracked and I don't like that as a point of privacy.
Is there a privacy setting I am missing, an application or extension I can download, or is the Mozilla team working on this as a feature?As far as I know, [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ the Classic Theme Restorer add-on] is the only way move the Reload button outside the address bar.
# Install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R). -
Using I Pod NANO. Installed I Tunes on Windows 7 Pro, 64 Bit.
Software works fine. Only problem is that I can't open up the
Store page from in the software. It just shows a blank screen.
Looks like it starts but then just freezes.
IT department worked all day. Reloaded software, set up
security, checked msconfig files. Tried all sorts or revissions.
Nothing works? Yet it works fine on my Windows 7 Home edition?
ANYONE have a clue. This Apple software is not the friendliest!!
This is very frustrating for something so simple to use!
This used to work. Upgraded to 10.3.3.. No good. Tried other revisions,
No Good! Can't purchase music or have the website fully pull up at all
from I Tunes.
Appreciate any help if some has been through this. My service that
I have for IT had to give up. 6 hours of things they tried. Nothing worked.You would get better response from the iTunes community forum.
Have a nice day! -
Deactivating from a computer that is not working.
So I just purchased an new computer to replace an old one that is not working. (I was due for an upgrade so I didnt bother trying to repair it) I need to install my CS6 to my new laptop, but I first need to deactivate the programs from the old computer. Th only issue is that computer won't even bring me to start screen. It just turns on and stays black, but lit. SO, I would like to know if there is anyway to deactivate my software from my old computer to let me install it on my new, without sending my old laptop to get repaired.
Thank you for your time.Call Adobe Customer Support in your country and get them to deactivate it.
-
After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually. -
Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully. -
As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
If I sound rude, I apologize for that, as no impoliteness is intended from my side.
In advance, thanks. Have a wonderful day, everyone.That is only partially correct at best.
When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS. -
Remote Server Admin not working from outside of network for 1 server
Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold:
1- I can successfully manage the Xserve machine locally on our network and from my home. However, I can only manage the Quicksilver g4 server locally. Any kind of external access is not even acknowledged.
2- I'm not sure if I missed any steps when changing IP addresses for these server-based computers. Also, I'm not sure if I correctly set our dns names to the correct IP address.
For some background, this is the exact IP update process I used for each server:
Quicksilver G4 (file/web server) - Installed network card #2 and configured it with the new Public IP in the "System Preferences/Network" panel. In Server Admin I set our website to use the new public IP address. (network card #2 has no firewall device in between it and the internet.)
Then, I configured the default network card #1 to a static, yet private IP address that's behind our DLink firewall device with the rest of our network.
Intel Xserve (e-mail server) - Network card #1 was the only one setup before our network change. It had a static, public IP address. When we changed ISPs, I configured network card #2 to the new static, public IP address supplied to us by the new ISP in the "System Preferences/Network" panel. This new IP address is where all email traffic currently gets pointed to. (All mail is successfully sent and delivered.) Until our former ISP gets shutdown, I still have network card #1 configured to the older static public IP address. After the old ISP is shut off, I plan on changing network card #1 to a static, private address.
Any assistance would be greatly appreciated.
Mac OS X (10.4.8)What should I check in AD? I am by no means an expert with AD.
Yes, I am using the same client OS.
I am talking about RDP over the internet, like from home to the office. We have a static IP assigned to the router from ISP. A static internal IP assigned to the server on the LAN. And the router port forwards 3389 to the assigned IP.
It was working fine before we reinstalled Server 2012. These are the steps I took when reinstalling:
1. format drive and install OS
2. rename the server
3. install SQL server
4. Install TFS and SharePoint
5. Add Active Directory role and promote to Domain Controller
6. Add domain users
7. Enable remote access on the server and add users to remote access list -
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit
Download the Brother Mountain Lion drivers here.
Maybe you are looking for
-
Photoshop elements 4.0 running in Windows 8?
Hi, I have a computer that runs Windows 8 and just discovered that my old Photoshop Elements 4.0 program is "not compatible" I dont know if I should download it anyway and see what happens or what..? I hope I dont have to buy a new program. Though i'
-
How to use ODI Variables in Jython
Hi, im doing a dynamic interfaz .. so i make a connection to bd. When i try to do it .. i got an error... How can i access to the odi variables from odi.. this is my code .. <% import java.sql.*; import java.io.*; BufferedWriter bw = new BufferedWrit
-
Oracle advance queue change setup
Hi Gurus, We are currenlty sending data to target system through OAQ setup. As our new requirements, we would need to change source for one target to other.I mean X is original source and Y is target. Now X will be changed to Z and Z sends data to Y.
-
Jar file for com.bea.wli.worklist.portal.TaskUIPageFlowController
Hi, Can you please tell me which jar is required for the below import com.bea.wli.worklist.portal.TaskUIPageFlowController i am not able to find the required jar. And also I am not findinig the jar for the below import as well com.bea.wli.management.
-
Hi friends, I am using oracle 10g and forms 6i with windows 2008 server I have a two query with different where clause. I need output like below format HEADER IMPORT EXPORT TEST 100 400 Select 'TEST'