ATP Check through programme (any function module? )

Hi,
I want to do ATP check for a sales order through a programme. Could you please help me out with any Function module or any process?
Thanks,
Sandeep

Hi,
My exact requirement goes like this:
In Sales Order, if I remove delivery block at header level, and save it, then ATP check availabily should happen automatically (without clicking on check availability).
Could you please help me, if any one had similiar kind of situation?
Thanks,
Sandeep

Similar Messages

  • Any function module/program to write-xml schema of a idoctype

    Hi experts,
    I need to write the xml format into an internal table.
    input---idoc type.
    output--xml schema file in an internal table/or in some file.
    Through we60 we can get the xml schema.but through some program i want to get it .how to go for it.
    Any function module do you suggest which fits to this requirement and do the work for me.
    For ex: idoc type--orders05
    Message was edited by:
    dasr r

    Hello Dasr
    There are several function modules available. Please check yourself if any of them matches your demands.
    EDIN                           IDoc: Eingangsverarbeitung
    IDOC_INBOUND_XML_VIA_HTTP      eingang über http
    IDOC_XML_FROM_FILE             IDoc: Eingangsverarbeitung vom XML über Dateischnittstelle
    IDOC_ADAPTER_MB                Message Broker IDoc Adapter
    IDX_IDOC_TO_XML                Konvertierung IDoc nach IDoc XML im XMB
    IDOC_XML1                      erweiterte Tabellenpflege (generiert)
    IDOC_XML_DISPLAY               Anzeigen eines IDocs in XML-Format mit XSL
    IDOC_XML_TRANSFORM             Anzeigen eines IDocs in XML-Format mit XSL
    Regards
      Uwe

  • Any function module for calling a text editor in subscreen?

    Hi,
    I would like to know if there is any function module that can be used to call a text/note editor and can be displayed in a subscreen of a main screen (dialog programming)? This text/note editor should not be able to edit, but for display only.
    Please help. Thanks...

    >
    Pablo Casamayor wrote:
    > Hi,
    >
    > maybe this can help:
    >
    > check program SAPTEXTEDIT_TEST_1
    > in this program pay attention to:
    >
    >
    > MODULE pai INPUT.
    >
    >   CASE ok_code.
    > ....
    >     WHEN 'FIND'.
    >       PERFORM find_text.
    > ....
    >     WHEN 'HIGHLIGHT'.
    >       highlight = 1.
    >       PERFORM highlight_lines USING highlight.
    >
    >
    >
    > *&---------------------------------------------------------------------*
    > *&      Form  FIND_TEXT
    > *&---------------------------------------------------------------------*
    > FORM find_text.
    >   found = 0.
    >   IF case_sensitive = 'X'.             " button on Dynpro
    >     case_sensitive_mode = editor->true.
    >   ELSE.
    >     case_sensitive_mode = editor->false.
    >   ENDIF.
    >   IF whole_word = 'X'.                 " button on Dynpro
    >     whole_word_mode = editor->true.
    >   ELSE.
    >     whole_word_mode = editor->false.
    >   ENDIF.
    >
    >   CALL METHOD editor->find_and_select_text
    >                EXPORTING search_string = search_string
    >                          case_sensitive_mode = case_sensitive_mode
    >                          whole_word_mode = whole_word_mode
    >                CHANGING string_found = found.
    > * Flush for proper work of the following if statement
    >   CALL METHOD cl_gui_cfw=>flush.
    >   IF NOT search_string IS INITIAL.
    >     IF found NE 0.
    >       MESSAGE s000 WITH text-013.
    >     ELSE.
    >       MESSAGE s000 WITH text-014.
    >     ENDIF.
    >   ENDIF.
    > ENDFORM.                               " FIND_TEXT
    >
    > *&---------------------------------------------------------------------*
    > *&      Form  HIGHLIGHT_LINES
    > *&---------------------------------------------------------------------*
    > *      -->P_HIGHLIGHT  text                                            *
    > *----------------------------------------------------------------------*
    > FORM highlight_lines USING    p_highlight.
    >   IF selection EQ 'X'.
    >     CALL METHOD editor->highlight_selection
    >          EXPORTING highlight_mode = p_highlight
    >          EXCEPTIONS has_no_effect = 1.
    >     IF sy-subrc NE 0.
    > *      add your handling
    >     ENDIF.
    >   ELSE.
    >     CALL METHOD editor->highlight_lines
    >          EXPORTING
    >                  from_line = from_line
    >                  to_line = to_line
    >                  highlight_mode = p_highlight
    >          EXCEPTIONS has_no_effect = 1.
    >     IF sy-subrc NE 0.
    > *      add your handling
    >     ENDIF.
    >   ENDIF.
    >
    > ENDFORM.                               " HIGHLIGHT_LINES
    >
    > and this link:
    > http://help.sap.com/saphelp_45b/helpdata/EN/0e/514035634d761fe10000009b38f889/frameset.htm
    >
    > Best regards.
    >
    > Edited by: Pablo Casamayor on Apr 17, 2009 9:19 AM
    Hi Pablo,
    I have look through the program SAPTEXTEDIT_TEST_1. This program does the Text Selection and Highlighting the Text only after the buttons of each of the function is clicked.
    My requirements will be, having all the selected text (with a string pattern) to be highlighted when this text editor is displayed. Is this possible?
    Really thanks for your replies...
    Regards,
    Chuak Fen

  • How to create Inbound Idocs in a ABAP program? Any function Module?

    Hello Experts,
    My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
    I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
    If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
    I populated T_EDIDD with data records from  IDOC_INBOUND_WRITE_TO_DB.
    To the function module IDOC_INPUT_ORDERS,  T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
    I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
    I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
    Can anybody please provide inputs?
    Regards.

    Hi Anjali,
    Thanks for the response.
    I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
    for compatibility: clear administration data of data records
               perform data_records_wipe
                                      tables
                                          t_data_records.
    FORM DATA_RECORDS_WIPE
                      TABLES
                          T_DATA_RECORDS_IN  STRUCTURE EDIDD.
      LOOP AT  T_DATA_RECORDS_IN.
        CLEAR: T_DATA_RECORDS_IN-MANDT,
               T_DATA_RECORDS_IN-DOCNUM,
               T_DATA_RECORDS_IN-SEGNUM,
               T_DATA_RECORDS_IN-PSGNUM,
               T_DATA_RECORDS_IN-HLEVEL.
        modify t_data_records_in.
      ENDLOOP.
    ENDFORM.                               " DATA_RECORDS_WIPE
    This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
    I need to create INBOUND Idocs with the data in ABAP program.
    Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
    Regards

  • Is there any function module to get the variables used in a query?

    Hi experts
    Please, do you know if is there any function module to get the variables used in a query?
    Thanks and regards
    Luis

    Hi Srini
    Yes, I have checked the tables but I need a function module
    Thanks anyway!
    Luis

  • Is there any function module to convert the date format

    Dear ABAPers,
    Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
           I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
    Thanks & Regards,
    Ashok.

    hi,
    create custom function module or copy the below code in the report ..and use it
    the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
    FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
    ""Local interface:
    *"       IMPORTING
    *"             VALUE(DATE) LIKE  SY-DATUM
    *"       EXPORTING
    *"             VALUE(FORMATTED_DATE)
    *"       EXCEPTIONS
    *"              INVALID_DATE
    TABLES: TTDTG.
    DATA: BEGIN OF T_DATE,
            YYYY(4) TYPE C,
            MM(2) TYPE C,
            DD(2) TYPE C,
          END OF T_DATE.
    DATA: DAY(3) TYPE N.
    DATA: VARNAME LIKE TTDTG-VARNAME.
    IF DATE IS INITIAL.
      CLEAR FORMATTED_DATE.
      EXIT.
    ENDIF.
    check document date format
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
      EXPORTING
        DATE = DATE
      EXCEPTIONS
        PLAUSIBILITY_CHECK_FAILED = 1.
    IF SY-SUBRC NE 0.
      RAISE INVALID_DATE.
    ENDIF.
    MOVE DATE TO T_DATE.
    CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
    SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
    WRITE T_DATE-DD TO DAY.
    CONCATENATE DAY ',' INTO DAY.
    CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
      SEPARATED BY SPACE.
    ENDFUNCTION.
    the output is :--Convert a DATE field into a full format date eg. March 23, 2000
    Regards,
    Prabhudas

  • Is there any function module which will upload storage locations for a mat

    Hi gurus,
      Is there any function module or BAPI to extend the storage locations of material which is done through <b>MMSC</b> transaction. I need to write a program to upload new storage locations for some materials.Please advise.
    Thanks ,
    Sam.

    You can do this using the BAPI_MATERIAL_SAVEDATA
    Regards,
    Rich Heilman

  • Any function module to transfer File(Excel)  from Appli Serveto Unix Server

    Hi all,
    Do you have any function module to transfer excel file from application server to Unix server.
    Can anyone have some sample code for the same.
    Thanks in Advance.
    Sreedhar Marri

    Hi,
            There is no function module ,instead use open dataset command.
    Syntax example,
    data: e_file like rlgrap-filename.
    data : txtstr type string.
    concatenate  searchpoints-dirname '/scm/' werks '/' filnam into e_file.
      open dataset e_file for output in text mode encoding default.
    loop at itab.
        concatenate itab ',' into txtstr.
         transfer txtstr to e_file.
      endloop.
    where itab is the contents u want to transfer.
    Pls check for required authorisations with ur BASIS for open dataset command.
    Regards,
    Balakumar.G.

  • Material Availablity check for production order - function module?

    I have a production order with Material BOM, which has more than 30 components in it. Please suggest me if there is any function module to do the material availability check of a production order. I need the missing component list as output of that function module, with quantities if possible.
    thanks,
    Subbareddy

    You might want to look at these FMs:
    CO_ZA_AVAILABILITY_CHK_ORDER
    ISA_AUC_MATERIAL_AVAILABILITY
    Thanks,
    Santosh

  • Is their any function module for deleting condition record i am trying

    Hi Experts,
    Is their any function module for deleting condition record i am trying  this way.......
    DATA: TABLE (4) TYPE C.
    DATA: KNUM LIKE KONH-KNUMH
    DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
    DATA: T681_STR LIKE T681.
    DATA: LV_NUM TYPE I.
    GET PARAMETERS
    PARAMETERS: TABNO LIKE T681-KOTABNR.
    PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
    REFRESH INT_KNUMH.
    Select single * from T681 into T681_STR
    where kvewe = K_VEWE AND
    KOTABNR = TABNO.
    IF SY-SUBRC NE 0.
    WRITE: / 'No entry in T681 for number ', TABNO.
    WRITE: / 'Check whether corresponding condition table exists.'.
    EXIT.
    ENDIF.
    TABLE = T681_STR-KOTAB.
    SELECT KNUMH FROM (TABLE) INTO KNUM.
    SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
    IF SY-SUBRC NE 0.
    INT_KNUMH-KNUMH = KNUM.
    COLLECT INT_KNUMH.
    ENDIF.
    ENDSELECT.
    DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
    IF LV_NUM EQ 0.
    WRITE: / 'No inconsistent entries found.'.
    WRITE: / 'Each record in the condition table has a corresponding.'.
    WRITE: / 'entry in the KONH table.'.
    EXIT.
    ENDIF.
    LOOP AT INT_KNUMH.
    IF TESTMODE IS INITIAL.
    DELETE FROM (TABLE) WHERE
    KNUMH = INT_KNUMH-KNUMH.
    IF SY-SUBRC = 0.
    WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
    ELSE.
    WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
    WRITE: INT_KNUMH-KNUMH(10).
    ENDIF.
    ELSE.
    WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
    ENDIF.
    ENDLOOP.
    is their any Standerd Function module  for comparing  tables if the condition record not exist in it has to exit if it is their then compare  those two tables if not exist in one table also that has  to be delete  the condition record
    Please let me know .....

    Hi,
       You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
    Regards
    Kiran Sure

  • Is there any function module or BAPI to create maintenance item.(Urgent)

    Hi Experts,
                       I want to create an RFC which creates the maintenance item in the sap. The RFC is going to receive data from XI. So is there any function module or BAPI to create maintenance item? so that i can call that FM in my RFC.
    Thanks,
    Prasanna
    Helpful answers will be rewarded.

    Check and implement your program accordingly:
    *& Report  ZMRS_BAPI_DEMO_ORDERS
    REPORT  ZMRS_BAPI_DEMO_ORDERS.
    DATA: gs_method     TYPE bapi_alm_order_method,
          gs_header   TYPE bapi_alm_order_headers_i,
          gs_header_up  TYPE bapi_alm_order_headers_up,
          gs_return     TYPE bapiret2,
          gs_numbers    TYPE bapi_alm_numbers,
          gs_return_commit TYPE bapiret2,
          gs_demo_order TYPE objidext,
          gt_demo_order LIKE TABLE OF gs_demo_order,
          gt_method     LIKE TABLE OF gs_method,
          gt_header     LIKE TABLE OF gs_header,
          gt_header_up  LIKE TABLE OF gs_header_up,
          gt_return     LIKE TABLE OF gs_return,
          gt_numbers    LIKE TABLE OF gs_numbers,
          gt_return_commit LIKE TABLE OF gs_return_commit.
    DATA lv_not_successful TYPE c.
    DATA lv_ref_cnt TYPE i.
    IMPORT gt_method FROM MEMORY ID 'MET'.
    IMPORT gt_header FROM MEMORY ID 'HED'.
    IMPORT gt_header_up FROM MEMORY ID 'HUP'.
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
      TABLES
        it_methods   = gt_method
        it_header    = gt_header
        it_header_up = gt_header_up
        return       = gt_return
        et_numbers   = gt_numbers.
    CLEAR lv_not_successful.
    LOOP AT gt_return INTO gs_return.
      IF gs_return-type = 'E'.
        lv_not_successful = 'X'.
      ELSEIF gs_return-type = 'W'.
       lv_not_successful = 'X'.
      ELSE.
      do nothing
      ENDIF.
    ENDLOOP.
    IF lv_not_successful <> 'X'.
    commit changes
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait   = 'X'
        IMPORTING
          return = gs_return_commit.
    ELSE.
    rollback changes
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
        IMPORTING
          return = gs_return_commit.
    ENDIF.
    EXPORT gt_return TO MEMORY ID 'RET'.
    EXPORT gs_return_commit TO MEMORY ID 'COM_RET'.

  • Is there any Function Module to create SERIAL NUMBER

    Hi All,
         I need to create "SERIAL NUMBER" by passing "Material & Equipment Category ('S' -Always) ".
    Plz Advise me , is there any Function Module to Create  "Serial Number ".
    Thanks in Advance.
    Vyshu.

    hi,
    check this function module
    'NUMBER_GET_NEXT
    Search with  NUMBER_GET_NEXT keyword
    Thanks & REgards

  • Any Function Module to Read Inspection Plan ?

    Hi
    Does anyone know any Function Module/BAPI to read the Insepction Plan( Or Inspection Plan Charecterstics) for a Meterial?
    These inspection Palns will be created using Transaction QP01/QP02.
    Thanks for your help.

    Hi,
    Pl check whether any of the below will meet your requirement:
    QDTA_INSPECTION_STAGES_READ  
    QDTA_INSPECTION_STAGE_READ   
    QDTA_INSPECTION_ST_READ_NO_BUF
    Regards
    Muraleedharan.R

  • Any function module or bapi to get sales order number and invoice number?

    hi all,
    with delivery order number provided, do we have any function module or bapi to get sales order number
    and invoice number?
    thanks.

    Hi,
    Check
    BAPI_SALESORDER_CREATEFROMDAT1
    BAPI_REMUREQSLISTA_CREATEMULT  Agency Business: BAPI Create Invoice Lists from Vendor Billing Documents
    BAPI_REMUREQSLISTB_CREATEMULT  Agency Business: BAPI Create Invoice Lists from Payment Documents
    BAPI_REMUREQSLISTC_CREATEMULT  Agency Business: BAPI Create Invoice Lists from Posting Lists
    BAPI_REMUREQSLIST_CHANGEMULT   Agency Business: Change Invoice List Documents BAPI
    BAPI_REMUREQSLIST_GETLIST      Agency Business: BAPI Determine Detailed Data for Invoice List Documents
    BAPI_REMUREQSLIST_RELEASE      Agency Business: BAPI Release Invoice List Documents to FI
    Edited by: Neenu Jose on Nov 26, 2008 8:53 AM

  • Is there any function module to get the purchase order conditions from EONP

    Hi,
    I want to get the EONP and EONH table details for the purchase orders with the help of function module. Can anyone tell me any function module name which would give me those details.
    Thanks,
    Atanu

    Hi
    Check with BAPI function module BAPI_PO_GETDETAIL and BAPI_PO_GETDETAIL1.
    Regards
    Srilaxmi

Maybe you are looking for