Attachement of profit center and site where it is avaible, i want T.Code...

Hi
Attachement of profit center and Business place (plant, site) where it is avaible, i want T.Code...
where i can assiagn plant to profitcenter.
Thank you

Hi
There is no assignment of plant to profit center directly, however you can use derivation rule to get this assignment.Use transaction 3KEH and 3KEI for the same.
Anand

Similar Messages

Functionality of Profit Center and Cost Center

Hi,
I am unable to understand the functionality of Profit center and cost center, I know that cost center represents area within an organization for which you will like to see the expenses for a particular time period. for example in an organisation we have three cos centers Accounts, HR and Admin. whenever you post an accounting document in FI you will specify the cost center to which the expense relates. but in some cases when you post an expense and give the relative cost center the profit center is also driven by the system. why is this behavior? i mean i have posted an expense not an income then why is system driving the profit center as well?
Profit centers are used if you want to see the profit of different area of your organisation. in what kind of postings we use profit center? and if we could use profit center to draw income and loss for a specific area why do we need segment reporting? and what is the difference between Segment and Business area. what i understood from their definition is that they are both same and use for same purpose.
I am totally lost in these concepts. please some one help me out with an example. i am stuck at this point. some one please clarify my concept of Profit Center, Cost Center, Segments and business area please.

Hi,
Cost center & Profit Center are organizational units within the enterprise structure , created for better internal control.
As the name suggests Cost Center is the lowest level of the organizational unit representing a defined location of cost incurrence or otherwise to which you can meaningfully assign the cost(both direct & Indirect).
Profit Center is an organizational unit in accounting ,where management would require to see the profitability & fix the responsibility. It may be each plant/division of the company .
If you consider the Plant is the Profit center, you can take the various deptts in the Plant as cost centers. you can draw a balance sheet & profit & loss account statement at profit center level but this will be for your internal use.From this you can know the ROI on particular area. Profit centers are assigned inside the cost center so when you update cost center, profit centers are updated automatically.
Where as Segments are used for legal reporting of your accounting standard as per IFRS. Both Business Area & Segments are more or less same with some technical difference.
Business area is a free organizational unit. It can be derived through cost center or can be entered manually.
But segment is a dependent organizational unit. It is defined & attached inside the profit center master data. It can’t be entered manually.
SAP suggest to use the Segment concept.
Thanks & regards
Deepak

New Ledger - Profit Center and Segment in stock purchase

Hi Gurus,
In a case with New Ledger where Profit Center and Segment scenarios are activated:
1. How derivate the Profit Center and Segment in a stock purchase, because here there isn't an expense account imputed to a Cost Center.
stock +1000
supplier -1000
Thanks in advance.
José Luis

Hi,
Material Master will have a profit center attached and profit center amster shouldl have segment. And thus derivation of both will happen.
Regards
Milind

Tables for Profit center and Risk Category

Hi,
Can anyone please tell me in which tables the values for profit center and risk category is maintained at.
Thanks
Lilan

Hi Lilan,
Profit Centre's Data element is PRCTR. You can just press Where used button by going into SE11 and see in what scenario you need this field.
Because PRCTR field is maintained for Sales Order, Production Order tables and many other tables.
You need to look into ur requirement that what scenrio u are working in.
Please award points if helpful.
Regards,
Himanshu.

Splitting in NEW GL with one profit center and two segments

What options are avialble for splitting in New GL when there should be one profit center and two segments - maybe characteristic derivation could solve it?

If I have understood your question correctly then you have one profit center and you want to attach two segments to it.
Segment is higher level than the profit centre. One segment can have n number of profit centres but one profit centre will have only one segment. This is the drawback in using the 'segment' in SAP. Also, it is difficult to change sengment embedded in profit centre master.
You might try using profit centre groups than segment.
-Vedavatee

Dummy profit center and profit center clearing account being used

Dear Gurus,
We are implementing ECC 6.0 and will have FI PCA.
I have 2 profit centers.(and one dummy profit center 9999)
1)RM common
2) FG1
When RM is issued to production order and order is confirmed, the goods movement are 261 and 101 respectively.
the entry at the time of confirmation is
Discription                          Profit center
Consumption of RM             9999
To RM inventory                RMCommon
FG Inventory dr                  FG1
To Factory output account 9999
What should actually happen is instead of 9999 consumption of RM should hit profit center RM common and instead of 9999 the factory output account should hit FG1.
The profit center clearing account is being used for the entry in the GL view (as opposed to entry view in accounting)
Only then will accounting treatment be correct.
I have checked field statuses of the respective accounts and they have profit center and segment as optional fields.
Can you suggest what may be wrong and where i need to change the splitting config.
Regards,

Hi
Profit Center is derived from the assignment of Profit center in material master in costing view.
In the production scenario,
Consumption of raw material Dr - PC of FG
Cr Stock of RM - PC RM
Dr Stock of FG - PC FG
Cr confirmation of production of the Finished goods - PC FG
The reason for that is the production order is created with respect to the Finished Goods, master data of the production order inherits from the Finished goods.
Regards,
Suraj

Profit center and GL number length

Hi Dave, Ferry and all,
Just like cost center I would like to know the digit lenght of profit center and GL account.
Can you tell what Table to go or any other tcode to see the specific requirement my company has created for GL's or Profit center

Hi Dave,
what about the profit center?
thanks

Validation for Profit Center and Trading Partner

Hi Gurus,
Please help me in creating validation for Profit Center and Trading Partner.
I want system to give an error if we use Trading Partner related to particular profit centers.
Please revert asap.
Thank You

Hello,
Please use T.code OB28 and select the call up point 2.
Than go to Prerequisite in expert mode and say
Prerequisite : BSEG-VBUND <> ' '
Check: BSEG-PRCTR = ' '
Error Message.: xyz
I have created Validation understanding if someone gives Trading Partner and also Profit center while posting a doc than it will generate an error message.
however if you have some diff req please change it accordingly/ take Abapers helps if not very clear.
I hope this helps
Regards
Shireesh

Profit center and profit center group wise profit and loss account

Hi
My name is swetha i have one doubt in ecc 6 version. i need profit & loss account profit center and profit center group wise is it available in sap ecc 6 . Could u please details such kind of informatiion how we will get the p&l report in sap profit center group and profit center with transaction code.
Regards
Swetha

Hi
Please use report
S_ALR_87009712 - Profit Center List: Plan/Actual
Here you can enter the Profit Center Group for which you need the P&L .
Also create a account group which should include all your PL accounts and use the same in the selection of the report.
There are other reports you can try on the same concept.
S_ALR_87009712 - Profit Center List: Plan/Actual
S_ALR_87009726 - Profit Center Group: Plan/Actual/Variance by Origin
S_ALR_87009734 - Profit Center Group: Plan/Plan/Variance
S_ALR_87009717 - Profit Center Group: Quarterly Comparison of Actual Data
Thanks

Bring profit center and cost center hierarchy from R3 to BW in BI 7.0

Hello,
I need to get the hierarchy from R/3 to BW. Can someone send me a link or mention steps i need to do to bring profit center and cost center hiearchy from R3 to BW.
Thanks
Laura.

As you would for any other infoobject
Activate the business content hierarchy datasources on R3 for cost centre and profit centre
Go into BW - replicate the metadata
Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
Then repeat new infopackages for all hierachies

Requeirement is while posting FB01 profit center and trading profit center

Hi experts
In ECC6.0 while posting FB01, 40 is the debit key the user is assign profit center and trading profit center and second line item is 50 is the credit key user was assigned only profit center and system is automatically captured the trading profit center. Now the requirement is in credit side 50 posting key only required profit center not required the trading profit center. Could you please assist us step by step procedure as soon as possbile.
This is very urgent requirement.
Thanks & Best regards
Sreenivas

Hi experts,
Partner profit center is confirmed
Thanks & Best regards
Sreenivas

RE - Change profit center and cost center after LO activated

Hi ppl, One question. Is there any harm if we change the profit center and cost center of the business entity, building, rental unit only after the lease out has been activated?

No need to change the cost center, as you want to have valid from date as 01.10.2010.
Having profit center before that date is not an issue and does not have any negative impact.
Regards,
SDNer

BAPI To Update Profit Center And Profit center group

HI All,
We have requirement scenario in which MDM Will Syndicate the PC and PCG And We have to update the PC and PCG in R3.
Do we have a Standard BAPI For Profit center and Profit Center Group Update?
Thanks In Advance!!!!!
Moderator message : Search for available information, duplicate post locked. Continue with original thread.
Edited by: Vinod Kumar on Oct 17, 2011 1:59 PM

Hi
Try This BAPI...
BAPI_PROFITCENTER_CHANGE
Regards
Ajit

Historical profit center and current profit center

Hi experts,
One of my senior developer said me out of two cubes, one is storing historical truth about profit center and other is storing current truth. How can I tell he difference. How do you make a cube to store historical and other to store current profit center.

Hi,
Your statements imply that the major difference between the two cubes is that one has history or trail of Profit Center changes and the other has current data. Now, if you want to analyze current data, you could report off the cube with current data. But then, if you want to include some data in the cube with history in this analysis, it then one would require more information about the cubes to make any suggestion.
BR/
Mathew.

Profit center and Distrbution Rule

Is there any difference between profit center and distribution rule, or they are the same thing?
Thanks

Hi,
This question belongs to main forum. These two concepts are different. Distribution Rule is only a rule to distribute costs or revenues. You may find the online help as follows:
A profit center is a company unit or division that performs a specific business function.
For costs and revenues that can be assigned directly to a profit center, you define a direct distribution rule. When you create a profit center, SAP Business One automatically defines a distribution rule with the same name and code as the profit center. This distribution rule cannot be changed. The default values of the rule are: direct debit, and factor 100 for a total value of 100.
When it is not possible to determine the profit center to which to assign the costs and revenues, you can define an indirect distribution rule.
If it is not practical or possible to distribute indirect costs as soon as they are incurred, you can assign the costs to a "zero profit center" and then distribute them by running reports and evaluations at regular intervals.
Thanks,
Gordon

Attachement of profit center and site where it is avaible, i want T.Code...

Similar Messages

Maybe you are looking for