Attribute override for @GeneratedValue
It seems that there's no capability to override @GeneratedValue for subclass (of mapped superclass etc.) in JPA?
If this is correct then I can argue lack of design consistency. @AttributeOverride allows for column to be overwritten for property/field and @Id. If column for @Id can be overwritten, which implies different tables, then someone should assume possible sequence per table strategy. For legacy database this may be an issue.
I have seen suggestions to move id field/method to sublass, but it is a workaround. I shouldn't have to do something that I wouldn't normally do to accommodate use of Java Persistence API.
Any thoughts? Perhaps JPA specs group can look into it?
we do not want to calculate the value as user can enter any value as long as it is greater than the number of values in the VO's.
So the user can just enter 20 in the Textinput which means 20 people attended some class but they can enter only 10 people actually. So users dont have to enter all the information as sometimes it could be in hundreds like in conference. it is just for information purpose.
I want to use the value but not calculate it.
so am i doing right like mentioned in the previous thread?
Similar Messages
-
Is there a report Override for AR statement print in Report One Manager?
I have created an AR Statement in Crystal and would like to use this report in the AR Aging-->Statement(one page per customer). I don't see an Override for A/R Statements. Does one exist?
Never mind. I found it. Collection Report.
Edited by: Pat Frohlich on Jun 9, 2009 4:22 PMHello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie. -
Attribute "Report Layout" is missing in the "Print Attributes" tab for IR
Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, WilliI've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi -
How to use visual attribute property for the tab canvas
Hi all,
i wanted to use set_tab_page_property ,and a visual attribute property for that
respective tab page .
but is saying to many declarations to match up . how will i able to do that.
can any one helip me out ...
example....
i wanted to set the page name (just name of the tab page) red color when i query the form under some conditions .
can anyone help me out in this.
thanks in advance
vardhiHi all,
i wanted to use set_tab_page_property ,and a visual attribute property for that
respective tab page .
but is saying to many declarations to match up . how will i able to do that.
can any one helip me out ...
example....
i wanted to set the page name (just name of the tab page) red color when i query the form under some conditions .
can anyone help me out in this.
thanks in advance
vardhi -
Error: Attribute set for field_name in view object VO_instance failed
While I try to add a new row in a table using a VO created on two EOs, it comes back with error message 'Attribute set for <field_name> in view object <VO_instance> failed' for each field I enter the data. Please suggest me if I am missing something while doing it.
Are you sure you are specifying a value for the attribute of the VO and the value of correct data type.
Also, please make sure that you have one row coming from each EO , so that the VO has one row, and a outer join is not happening.
Thanks
Tapash -
Setting property attribute values for multiple selected objects.
Hello,
Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
ThanksHi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil -
Unable to find corresponding attribute definition for taxonomy
Hi,
I am facing this issue while the endecaScript Service runs.
In the ConfigurationGeneratorForge.log I am seeing this message . Can anybody will help me on this
Thanks in Advance
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec 'under_100'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '100_to_500'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '100_to_150'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '150_to_200'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '200_to_300'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '300_to_400'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '400_to_500'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '500_to_1000'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec 'over_1000'. An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
Jan 24, 2013 12:18:14 PM com.endeca.edf.adapter.AdapterRunner run
SEVERE: Unable to find corresponding attribute definition for taxonomy with root node spec 'product.price_range', you must define a dimension in the schema feed
com.endeca.edf.adapter.AdapterException: Unable to find corresponding attribute definition for taxonomy with root node spec 'product.price_range', you must define a dimension in the schema feed
+ at com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator.execute(TaxonomyGenerator.java:249)+
+ at com.endeca.itl.fcm.integration.cadk.ConfigurationAdapter.execute(ConfigurationAdapter.java:118)+
+ at com.endeca.esource.springadapter.SpringDelegateAdapter.execute(SpringDelegateAdapter.java:60)+
+ at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168)+
+ at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43)+Hi,
I was also getting same error, which is solved now.
For reference following is what we need to check.
- Proper mapping of source data to endeca dimension is made.
- You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
HTH
MS -
Problem Instanciating BO - No default attribute defined for the object type
Hello Experts,
I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
Can anybody help, please?Hello everyone,
it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
I feel deeply sorry for that, Marcos.
At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
There you'll go.
Best wishes,
Florin -
Error as Attribute check for Asst, Govt & Parl Bus & PA to Dpty Chair fail
Hi,
I have created a new user and the user can not use the "SHOP" transaction in SRM portal. He is getting the error "Attribute for user XXXX contains errors. Inform system admin".
I have checked the org. stracture through PPOSA_BBP and find the error as "Attribute check for YYYY failed".
Could any body please suggest me what I need to do now?
where,
XXXX----name of the user
YYYY----Position of the user
Thanks,
PijushhI
users_gen
execute
now select
copy user and employee data from template
and
now
select radio button
create users from existion su01 users (since you have already created SU01 user in gui)
then execute
org id 5XXXXXXX - where do you want to assign the user ( this is org id from ppoma_bbp)
and selcect country of that org .(country must be mentioned in org 5XXX in the address tab)
and continur
and area of users
type your user id and execute
muthu -
Org Structure - "No attribute found for scenario BBP"
SRM 7.0 Extended Classic Scenario
Hi, On the check tab for the Central Person (SRM 7.0 shows CP instead of BP in org structure) I have the message "No attribute found for scenario BBP". This is SAP message number 5AT103
Transaction BBP_BP_OM_INTEGRATE is not showing or clearing the issue.
I have this issue with one user that I created manually, I dragged him around a lot. Other users I created manually within the same organizational unit are fine.
Also, we replicated part of the R3 4.7 HR Org Structure into SRM and I dragged it into my manually created SRM org structure. All users (error on CP tab, as I mentioned) replicated over, have this error.
I took a manually created user that was OK and dragged him into the replicated part of the org structure and he is still OK.
Please help.
Thanks,
MattHi Matt,
We are facing similar issues. Please let me know how u resolved this issue ?
Rgds
Siva -
Customer-specific attributes (properties) for processes?
Hello community,
I already know how to define customer-specific attributes (properties) for documents stored in Solution Manager using the Document Modelling Workbench. For documents, everything works fine, so far.
But: I also want to define customer-specific properties for processes. Is this possible? If yes, how do I do that? I cannot find any related configuration options -- neither in SPRO nor in Solution Manager's own project configuration area.
Thanks in advance,
ThomasHi,
In SPRO, naviagete to SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Implementation/Upgrade -> Blueprint and Configuration -> Object Attributes -> Definition of Customer Attributes for Object Types
Best regards,
Jacques. -
Default Marketing Attribute set for BP
Hello,
Is there a way to default the Marketing attribute set for a business partner record in CRM UI? I tried DO_PREPARE for BP_DATA/MarketingAttributesEL but it does not seem to be working. Any ideas?
Thanks
RodneyTry with BADI : BADI_CRM_BP_UIU_DEFAULTS
-
Change Reference Attribute - "Manager" for multiple users
Hi,
I have a scenario in which I have to create a workflow to change a reference value attribute - "Manager" for multiple users in one go. Is it possible to achieve this with workflow. If yes, then how?
Regards,
Manuj KhuranaHello,
not out of the box, since in workflows and custom activities you can only access the reqestor and target object direcly.
But you can develop your own custom activity that fits you need, or do it with powershell custom activity.
I did a very similar thing, to be able to change users group membership from the user UI, so I have also edit objects other then requestor and target in a workflow.
Since both (manager and member) are reference attributes you maybe find this article helpful:
http://social.technet.microsoft.com/wiki/contents/articles/19615.fim-2010-r2-how-to-manage-group-membership-from-the-user-ui.aspx
I used this powershell activity in my solution:
http://fimpowershellwf.codeplex.com/
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
Revision: 14929
Revision: 14929
Author: [email protected]
Date: 2010-03-22 17:45:01 -0700 (Mon, 22 Mar 2010)
Log Message:
Added missing override for maxHeight to push maxHeight down to RichEditableText. If RichEditable text is scrolling make sure to always compose with a composer so that we get consistent results. The factory and the composer produce slightly different results which confuses the scroller. If the component doesn't have focus there is not necessarily a composer. It is possible that with this fix adjustContentBoundsForScroller() is no longer needed but leave it in for now.
QE notes:
Doc notes: None
Bugs: SDK-25899
Reviewed By: Gordon
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-25899
Modified Paths:
flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/components/RichEditableText.as
flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/components/supportClasses/Skinn ableTextBase.asYes it is 64bit:
[vuvffufg@HereAndNow-Main ~]$ uname -a
Linux HereAndNow-Main 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux -
D3L "produce" error: unable to find attribute object for top node
Hi
I'm new to this forum, hope someone can help me with this because it's really been causing a headache for a few days now.
I'm trying to deliver a flat file message with an interconnect standard ftp adapter. All the transformations go well but then i get this error message:
oracle.oai.agent.adapter.technology.D3LException: [SmartQueueDispatcher] <struct id="GallupData" name="" comment="" ...>: unable to find attribute object for top node, got `[ stationId: 01
startDate: 040801
(messsage truncated)
emission: 1
]' instead
at oracle.oai.agent.adapter.technology.D3L.produce(D3L.java:391)
at oracle.oai.agent.adapter.technology.TechBridge.messageReceived(TechBridge.java:876)
at oracle.oai.agent.client.SmartQueueDispatcher.run(SmartQueueDispatcher.java:451)
at java.lang.Thread.run(Unknown Source)
The message is exactly 65570 bytes (in the format written to the log).
Any help appreciated.
Leon SimonsenI finally solved the problem: The name of the d3l xml file must be named with the name of the data type. Just thought i'd let anyone know.
Maybe you are looking for
-
Report for PO wise Invoice Value
Is there any standar Report available thru which i can get the PO Ordered Value and the Invoice Amount against that PO..
-
How do I get text to align and look uniform? This shouldn't be as hard as I am making it!
Basically, I am trying to get the heading centered and the text aligned left....or at least aligned uniformly here. Unfortunately, for some reason I am unable to just mess with it in "design" as I usually do. The design page is blank and I can only
-
I have a group text with two of my friends. here's each person break down person 1 ATT network, using imessage person 2 verzion network, using imessage person 3 verzion network, using SMS All three of us are in a group chat. When person 1 sends a mes
-
Neighbor computers are not shown via TC
Hi There, when I connect my laptop via Ethernet cable I can see other computers of my network in Finder sidebar but when I connect the cable to TC and connect to network via TC I can't see them anymore what should I do?
-
Compilation Errors related to Packages
Hi All, I am a newbie in Java and had following query: I am getting compilation issues while compiling following code import java.util.Scanner; import java.io.PrintStream; public class Test public static void main (String args[]) Scanner inp