Audit update table by session

Hi Guys,
Anyone has experience and did a benchmark before?
Will there be slowness when updating a huge load of records compared with noaudit?
thanks

If you are auditing by session probably not especially compared to the result of auditing by access; however, the way to determine the answer is to configure auditing in test and to run a few test instert tasks with auditing off and on so that you have an actual set of test results to base your decision on.
HTH -- Mark D Powell --

Similar Messages

Statement AUDIT SELECT TABLE also audits update, delete and inserts

Hi,
Database Oracle 11g.
After turning on AUDIT with these 2 statements:
SQL> ALTER SYSTEM SET audit_trail = "DB_EXTENDED" SCOPE=SPFILE;
SQL> AUDIT SELECT TABLE BY ACCESS;
then insert, update and delete statements are recorded in sys.aud$ as well as select statements.
My expectation was to see only select statements in sys.aud$.
Please clarify :-)
Best regards
Erik

it should not record other action apart from select,can you crosscheck audit configuration by
select * from DBA_OBJ_AUDIT_OPTS;
SELECT * FROM ALL_DEF_AUDIT_OPTS;

Help with UPDATE table and database RELATIONSHIPS

HI there, I have been trying to create an update table for
weeks now and keep getting error messages.
The database has a table named:
"books" in the table cells are "idbook" and "book".
"suppliers" in the table cells are "idsupplier" and
"supplierName".
"category" in the table cells are "idcategory" and
categoryName"
They all have a relationships with this table:
"results" in the cells are "idbook", "idsupplier" and
"idcategory".
This "results" table brings all of the above tables together.
When I try to do an update, i am doing one to the results
table. Is this correct?
The updates have problems because when drawing the text to
the update table to view it comes in text form.
When trying to update, it wont becuase all of the cells in
the results table are numeric. This is because of the
relationships.
Can anyone suggest where i may be going wrong.
Ask anything you need to.
TA

MM_editCmd.CommandText = MM_editQuery
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
If (MM_editRedirectUrl <> "") Then
Response.Redirect(MM_editRedirectUrl)
End If
End If
End If
%>
<%
Dim Recordset1__MMColParam
Recordset1__MMColParam = "1"
If (Session("MM_UserName") <> "") Then
Recordset1__MMColParam = Session("MM_UserName")
End If
%>
<%
Dim Recordset1
Dim Recordset1_numRows
Set Recordset1 = Server.CreateObject("ADODB.Recordset")
Recordset1.ActiveConnection = MM_connSeek_STRING
Recordset1.Source = "SELECT * FROM Query1 WHERE UserName = '"
+ Replace(Recordset1__MMColParam, "'", "''") + "'"
Recordset1.CursorType = 0
Recordset1.CursorLocation = 2
Recordset1.LockType = 1
Recordset1.Open()
Recordset1_numRows = 0
%>
<%
Dim rsUpdate
Dim rsUpdate_numRows
Set rsUpdate = Server.CreateObject("ADODB.Recordset")
rsUpdate.ActiveConnection = MM_connSeek_STRING
rsUpdate.Source = "SELECT * FROM tblSpecies"
rsUpdate.CursorType = 0
rsUpdate.CursorLocation = 2
rsUpdate.LockType = 1
rsUpdate.Open()
rsUpdate_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = -1
Repeat1__index = 0
Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
%>
<html>
<head>
<link href="css%20files/paragraph.css" rel="stylesheet"
type="text/css">
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0"
marginwidth="0" marginheight="0"
onLoad="MM_preloadImages('images/Publicationb.gif','images/Factsheetsb.gif')">
<table width="100%" height="100%" border="1"
cellpadding="0" cellspacing="0" bordercolor="#5D5D5D">
<tr>
<td colspan="2">
<div align="right"></div>
<div align="left"></div>
</td>
</tr>
<tr>
<td colspan="2"><table width="100%" height="100%"
border="0" cellpadding="0" cellspacing="0"
bordercolor="#5D5D5D">
<tr>
<td valign="top"><form
ACTION="<%=MM_editAction%>" METHOD="POST" name="form1">
<table width="90%" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<td valign="top"><div
align="center"></div> <table border="1" align="center"
cellpadding="2" cellspacing="0" bordercolor="#FFFFFF">
<tr bgcolor="ECECD7">
<td colspan="2"><div align="center">
<p><strong><font size="3">Update Key Word
& Category</font></strong></p>
</div>
</td>
</tr>
<tr>
<td><div align="center">
<p><font size="1">Enter Up to 10 Species /
Product
Name</font></p>
</div>
</td>
<td><div align="center">
<p><font size="1">Select a
Category</font></p>
</div>
</td>
</tr>
<tr>
<td colspan="2" bordercolor="#D0D09D">
<%
While ((Repeat1__numRows <> 0) AND (NOT
Recordset1.EOF))
%>
<table width="100%" border="0" cellspacing="0"
cellpadding="0">
<tr><td width="50%"><div align="center">
<input name="f1" type="text" id="f13"
value="<%=(Recordset1.Fields.Item("TimberSpecies").Value)%>"
size="33">
</div></td>
<td width="45%"><div
align="center"></div></td></tr></table>
<%
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
Recordset1.MoveNext()
Wend %>
<div align="center"> </div> <div
align="center">
</div></td></tr><tr>td
colspan="2"> </td></tr><tr><td
colspan="2"><div align="right"><p><font
size="1">To Finalise Your Changes Please Press the Update
Button
<input name="update2" type="submit" id="update"
value="Update">
<input type="hidden" name="MM_update" value="form1">
<input type="hidden" name="MM_recordId" value="<%=
rsUpdate.Fields.Item("TimberSpecies").Value %>">

How to update Table MKPF (MKPF-MBLNR)

Can anyone help me on how can I update table MKPF? I'm trying to change the value of MKPF-MBLNR during GR Creation. (I created PO, then GR, then MIGO). So during GR creation, MKPF-MBLNR should be changed before going to MIGO. I just needed to modify MBLNR to do the offset of years depending on user input. I can not use BDC for this since this is a standard one.
I tried to use this function CALL FUNCTION '/SAPHT/DRM_CALC_DATE' to modify the data of mblnr and created a custom function "CALL FUNCTION 'ZUPDATE_EQUIP_DATE' starting new task 'test'"... where it open a new task once there's an error in updating the value. But this one is limited since SAP only allows the maximum of 6 sessions only.So if the 6th session has been reached, it stops the process.
Does anyone has a better idea regarding this?

Sorry for a vague explanation... Let me rephrase, my requirement is to change the Valid from field in IQ02.
So I create GR in MIGO. So from here, I wanted to manipulate the value of 'VALID FROM' field (MKPF-DATAB) to do some offset or addition based on user input. So during creation, the value that will be saved in MKPF is the one manipulated. So when you go to MIGO, and see the Valid FROM field, it will now show your manipulated data.
Any help/idea is very much appreciated...

How to find last accessed/updated tables and the query text?

I am using :
Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
How to find last accessed/updated tables and the query text?
Regards
LEE1212

Check DBA_TBALES view there you find one date column that indicate last update
One option is as follows:
(1) Turn the auditing on: AUDIT_TRAIL = true in init.ora
(2) Restart the instance if its running.
(3) Audit the table:
     AUDIT INSERT,SELECT,DELETE,UPDATE on TableName
     by ACCESS WHENEVER SUCCESSFUL
(4) Get the desired information using :
     SELECT OBJ_NAME,ACTION_NAME ,to_char(timestamp,'dd/mm/yyyy , HH:MM:SS')
     from sys.dba_audit_object.
Cheer,
Virag Sharma
http://virag.sharma.googlepages.com/
http://viragsharma.blogspot.com/
Message was edited by:
virag_sh

Is it possible to get the updated table records based on date & time.

Is it possible to get the updated table records based on date & time in oracle.
Thanks in advance.

no, actually i am asking update records using 'UPDATE
or DELETE' statement, but not insert statement.
Is it possible?
I think we can do using trigger on table, but problem
is if i am having 20 tables means i have to write 20
trigger. i don't want like this.Of course it's still possible, typically you'll find applications with a column LAST_UPDATE, probably a LAST_UPDATED_BY and so on column. You don't say what your business need is, if you just want a one of query of updates to particular records and have a recent version of Oracle, then flashback query may well help, if you want to record update timestamps you either have to modify the table, or write some code to store your updates in an audit table somewhere.
Niall Litchfield
http://www.orawin.info/

Updating table T020

FI Gurus,
Does anyone knows tcode where I can update table T020? and what extactly is maintained in this table?
Thank You for you help

Thank You, our ABAP person copied a tcode that we want to modify thru Z program when we execute tcode z tcode created we get the following message:
The transaction code ZFBS1 is not listed in table T020. However, the information from this table is needed so that the subsequent screens within a transaction can be found in table T019.
System Response
Abnormal termination of current activity (for example, batch input session creation, update).
Procedure
Please contact person in charge.
Maintain table T020 or check to see if the transaction code transferred to the function module "NEXT_DYNPRO_SEARCH" is correct.

"Error in updating Table J_1iexchdr"

Hi ,
When I am creating the excise invoice, It's terminated the program and gives the following error
"Error in updating Table J_1iexchdr"
What can be the reason?
Regards
Prem

Hi prem
Look if these threads can help
RG23C Update Problem
Problem in SAP Script
billing document not creating
return delivery
************Reward points if usefull**************

Error in updating table J_1PART2

Hi,
I am getting an error while saving the excise invoice as 'error in updating table J_1PART2'.
What would have gone wrong?????? please help!!!
Thanks ,
Ramya

Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
Please use Internationalization and Unicode for you CIN related queries

Error in updating table J_1IEXCHDR,J_1IEXCDTL in tcode J1IJ

Hi,
while cancelling excise invoice in Tcode J1IJ ,
we are getting 'error in updating table J_1IEXCHDR,J_1IEXCDTL'.
what is missing or tell the procedure to resolve the issue.
Regards,

Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
Please use Internationalization and Unicode for you CIN related queries

Bapi : BAPI_ALM_ORDER_MAINTAIN not updating table AFVU-USR08

Hi,
I have a requirement to update table AFVU-USR08.I am actualy dealing with tcode IW32/IW33 where in we need to update operation-->enhancement tab.I am using BAPI : BAPI_ALM_ORDER_MAINTAIN to do this.I am testing the BAPI directly( Not called in any program ),I can see a message like so and so order saved under notification,But there is no entry in table AFVU-USR08.
If any one have come across this prob. and got the sol. Pl. share it with me.
Your solution will be more helpful.
Thanks,
Bharani.

Hi Ferry,
1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
    l_fname = 'SOBKZ'.
    l_fvalue = 'U'.
    CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
      EXPORTING
        aufnr_imp = wa_meth-objectkey(12)
        field1    = l_fname
        value1    = l_fvalue.
but this program is giving dump for only this particular Value saying that This is PROTECTED field.
Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
If anyone has faced such type of problem & solved it then please let me also.
2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
Thanks in advance,
Hope to get the solution soon from all SAP gurus.
and help will be appriciated .
Gaurav.

Creating a better update table statement

Hello,
I have the following update table statement that I would like to make more effecient. This thing is taking forever. A little background. The source table/views are not indexed and the larger of the two only has 150k records. Any ideas on making more effecient would be appreciate.
Thanks.
Ryan
Script:
DECLARE
V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
V_EID_DOE     DATE;
V_EID_POE     SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
V_EID_APPR_DATE DATE;
V_CASE_CIV_ID     SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
V_CASE_DOE     DATE;
V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
V_CASE_APPR_DATE           DATE;
V_CASE_DEPART_DATE           DATE;
V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
CURSOR VALID_CIV_ID_FROM_EID IS
     SELECT EID.SUBJECT_KEY,
          TO_DATE(EID.PROCESS_ENTRY_DATE),
          EID.POINT_OF_ENTRY,
          TO_DATE(EID.APPREHENSION_DATE),
          DACS.CASE_EID_CIV_ID,
          TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
          DACS.CASE_CODE_ENTRY_PLACE,
          TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
          TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
          DACS.SBI_UPDATE_STEP,
          DACS.SBI_CIV_ID
     FROM SBI_EID_W_VALID_ANUM_V EID,
SBI_DACS_CASE_RECORDS DACS
WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
     BEGIN
          OPEN VALID_CIV_ID_FROM_EID;
SAVEPOINT A;
          LOOP
               FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE, V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
DBMS_OUTPUT.PUT_LINE('BEFORE');
               EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
DBMS_OUTPUT.PUT_LINE('AFTER');
          UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
WHERE V_CASE_CIV_ID IS NOT NULL
AND V_CASE_CIV_ID <> 0;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE
               AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
               UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
     UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE <> V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
WHERE V_SBI_UPDATE_STEP = 0
     AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
          UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
               UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE;
          UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
WHERE V_SBI_UPDATE_STEP = 0
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
          END LOOP;
          CLOSE VALID_CIV_ID_FROM_EID;
     COMMIT;
     END;
-----Thats it. Thanks for your help.
Ryan

Please use [ code] or [ pre] tags to format code before posing:
DECLARE
     V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
     V_EID_DOE DATE;
     V_EID_POE SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
     V_EID_APPR_DATE DATE;
     V_CASE_CIV_ID SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
     V_CASE_DOE DATE;
     V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
     V_CASE_APPR_DATE DATE;
     V_CASE_DEPART_DATE DATE;
     V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
     V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
     CURSOR VALID_CIV_ID_FROM_EID IS
          SELECT EID.SUBJECT_KEY,
           TO_DATE(EID.PROCESS_ENTRY_DATE),
           EID.POINT_OF_ENTRY,
           TO_DATE(EID.APPREHENSION_DATE),
           DACS.CASE_EID_CIV_ID,
           TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
           DACS.CASE_CODE_ENTRY_PLACE,
           TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
           TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
           DACS.SBI_UPDATE_STEP,
           DACS.SBI_CIV_ID
          FROM SBI_EID_W_VALID_ANUM_V EID,
           SBI_DACS_CASE_RECORDS DACS
          WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
BEGIN
     OPEN VALID_CIV_ID_FROM_EID;
     SAVEPOINT A;
LOOP
     FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE,
          V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,
               V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
     DBMS_OUTPUT.PUT_LINE('BEFORE');
     EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
     DBMS_OUTPUT.PUT_LINE('AFTER');
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
     WHERE V_CASE_CIV_ID IS NOT NULL
      AND V_CASE_CIV_ID <> 0;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
     WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE
         AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
         AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE <> V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_POE = V_CASE_POE
       AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
        AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
     WHERE V_SBI_UPDATE_STEP = 0
      AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
       AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
END LOOP;
CLOSE VALID_CIV_ID_FROM_EID;
COMMIT;
END;Peter D.

Update table a columns using columns from table b (values of 2 columns of table b need to taken from table c)

Guys,
I need to update table A columns col3, col4, col5 and col6 by table b columns col3, col4, col5 and col6 however table b col5 and col6 values need to come from table c col1.
Means table b col5 and col6 have values in it however i need to replace them with value from table c col1 and need to update table a col5 and col6 accordingly.
table a and table b has col1 and col2 in common.
i am trying something like this.
Update a
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from table_c c where c.col2=b.col5),
a.col6 = (select col1 from table_c c where c.col2=b.col6)
from table_A a inner join table_b
on a.col1=b.col1 and a.col2=b.col2
can someone help me reframe above update query?
thanks in advance for your help.

Try the below:(If you have multiple values, then you may need to use TOP 1 as commented code in the below script)
create Table tableA(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableA values(1,2,3,4,5,6)
create Table tableB(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableB values(1,2,30,40,50,60)
create Table tableC(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableC values(100,50,30,40,2,2)
--Insert into tableC values(200,50,30,40,2,2)
Insert into tableC values(100,60,30,40,2,2)
Select * From tablea
Update a Set
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from tablec c where c.col2=b.col5 ),
a.col6 = (select col1 from tablec c where c.col2=b.col6 )
from tableA a inner join tableb b
on a.col1=b.col1 and a.col2=b.col2
--Update a Set
--a.col3 = b.col3,
--a.col4 = b.col4,
--a.col5 = (select Top 1 col1 from tablec c where c.col2=b.col5 Order by c.Col1 asc),
--a.col6 = (select Top 1 col1 from tablec c where c.col2=b.col6 Order by c.Col1 asc)
--from tableA a inner join tableb b
--on a.col1=b.col1 and a.col2=b.col2
Select * From tablea
Drop table tablea,Tableb,TableC

Error in updating secondary stateful session bean

          Hi all,
          I have set up a cluster of 2 managed servers with WebLogic 6.1. I have a
          stateful session bean and several stateless session beans. the stateful
          session bean keeps user info and limited cached objects, all are
          serializable. it seems working fine, even after killing any one of the
          servers, as long as one is alive. a java application client creates a
          stateful session bean first, then calls stateless session beans with the
          remote interface of the stateful bean as a method parameter. No problem
          when stateful session bean is created. However, each stateless bean method
          generates the following error message if I turn the debug on (level 64). No
          exception stack traces, and all methods execute successfully.
          <Error> <EJB> <Failed to update the secondary copy of a stateful session
          bean from home:clientsession>
          I wonder what causes the error, and why it tries to update the stateful
          session bean. in all stateless session beans, only read into the stateful
          bean.
          Thank you,
          Fujin


This has been fixed in WLS 6.1 SP2.
          jagdip Talla wrote:
          > Hi Fujin,
          > please let me know, if u were able to solve the problem..
          >
          > hi guys,
          > appreciate if you could give me some clues
          > how to solve this problem ?
          >
          > i hv 2 WLS instances in a cluster,
          > when one server instance is shut down, i keep getting these errors ?
          > is it normal ?
          > <Feb 19, 2002 2:57:53 PM SGT> <Error> <EJB> <Failed to update the secondary copy of a stateful session bean from home:ejb/xyzrel1_2/xxxxHome>
          >
          > appreciate if u can let me know, if u could solve it..?
          >
          > thanks n regads
          > jagdip
          Rajesh Mirchandani
          Developer Relations Engineer
          BEA Support

What are the Update tables?

In LO Delta scenario, Data posted parallel into document tables and update tables. What are the Document tables? What are the Update tables?
Give example for Application 11, which is document tables, and update tables?

Hello Mannev,
Document tables are the actual application tables where the data is posted when you post a document in R/3.
Examples can be MSEG, VBRK etc.
Update tables are the intermediate tables which store data read from document tables. The V3 runs collects deltas in form of LUWs from these update tables and populates the delta queues.
hope this helps..
thanks,

Audit update table by session

Similar Messages

Maybe you are looking for