Authenticating a user or getting a user's password

I'm using Weblogic server 7.
I need to authenticate a user against a domain: establish whether the user
exists and if so, verify his password.
Code samples would be most welcome.

"Yonatan Taub" <[email protected]> wrote in message
news:[email protected]..
I'm using Weblogic server 7.
I need to authenticate a user against a domain: establish whether the user
exists and if so, verify his password.
Code samples would be most welcome.
You can use the login method .
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/security/services/Authent
ication.html

Similar Messages

  • None of the available endpoints supports authentication methods user/pass

    Dear All
    i  create a destination in the ce7.1.but when i  test the destination in the ws navigator  ,but it cant not run ,  the error is:
    The destination [YHSendMessage02] supports the following authentication methods [User Name/Password (Basic)], but none of the available endpoints supports them. The supported authentication types are [None]. Either the destination has to be updated or a new endpoint should be used
    i test the ws in the navigator  dont used the destination ,it work well, so i think maybe some wrong in my ce  about the destination 'configuration.
    best regards

    The following message returned from SAP:
    Root of the problem is found. The problem occurs as PI WSDLs doesn't contain security settings. Lack of security settings breaks consumption of those services. I'm working on providing a fix to enable consumption of such services.
    Looking at a WSDL generated by PI (example):
    <wsp:Policy wsu:Id="OP_si_servicename"/>
    The policy contains no transportbinding or authentication methods at all.
    Looking at a WDSL generated by ECC (example):
    <wsp:Policy wsu:Id="BN_BN_si_ManageCustomizingCustomerService_binding">
          <saptrnbnd:OptimizedXMLTransfer uri="http://xml.sap.com/2006/11/esi/esp/binxml" wsp:Optional="true" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/"/>
          <saptrnbnd:OptimizedXMLTransfer uri="http://www.w3.org/2004/08/soap/features/http-optimization" wsp:Optional="true" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/"/>
          <wsp:ExactlyOne xmlns:sapsp="http://www.sap.com/webas/630/soap/features/security/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
             <wsp:All>
                <sp:TransportBinding>
                   <wsp:Policy>
                      <sp:TransportToken>
                         <wsp:Policy>
                            <sp:HttpsToken>
                               <wsp:Policy>
                                  <sp:HttpBasicAuthentication/>
                               </wsp:Policy>
                            </sp:HttpsToken>
                         </wsp:Policy>
                      </sp:TransportToken>
                      <sp:AlgorithmSuite>
                         <wsp:Policy>
                            <sp:TripleDesRsa15/>
                         </wsp:Policy>
                      </sp:AlgorithmSuite>
                      <sp:Layout>
                         <wsp:Policy>
                            <sp:Strict/>
                         </wsp:Policy>
                      </sp:Layout>
                   </wsp:Policy>
                </sp:TransportBinding>
             </wsp:All>
          </wsp:ExactlyOne>
       </wsp:Policy>
    At the moment SAP is working on a fix to solve this problem.

  • Authenticating a user using JCO

    Hi,
    I was authenticating a user in SAP using the following code:
       System.out.println("\n\nVersion of the JCO-library:\n" + "----
    \n"
                        + JCO.getMiddlewareVersion());
                Properties props = new Properties();
                props.put("jco.client.client", "800");
                props.put("jco.client.user", "gk1");
                props.put("jco.client.passwd", "password");
                props.put("jco.client.lang", "EN");
                props.put("jco.client.sysnr", "01");
                props.put("jco.client.ashost", "172...*");
                client = JCO.createClient(props);
                // Open the connection
                client.connect();
    Here, the password for the "gk1" user is "password". Now if I update the password to be "password1" in the code - the user is still authenticated. No matter how many times I add digits towards the end of the password for this user, it still gets authenticated. Any ideas?
    Thanks

    Hi Gaurav,
    In SAP R/3 system, it takes only 8 digit password for any user. So, it checks upto 8 characters only. No metter how much digits or characters you have appended.
    Try to give some other password instead of just appending digits or characters behing "password".
    Regards,
    Bhavik

  • SOA Managed Server "Authentication for user denied" exception

    Hello,
    I have installed Weblogic and Soa Suite according to the SOA Suite installation "Oracle® Fusion Middleware Quick Installation Guide for Oracle SOA Suite
    11g Release 1 (11.1.1)" document.
    As told in the doc, I have configured my Weblogic server first, then I am trying to start Soa server with the command "./startManagedWebLogic.sh soa_server1"
    But I am getting this error; mucho obrigado!
    <Nov 3, 2010 5:35:20 PM EET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Nov 3, 2010 5:35:20 PM EET> <Critical> <Security> <BEA-090403> <Authentication for user denied>
    <Nov 3, 2010 5:35:20 PM EET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
    weblogic.security.SecurityInitializationException: Authentication for user denied
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    Truncated. see log file for complete stacktrace
    >
    <Nov 3, 2010 5:35:20 PM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Nov 3, 2010 5:35:20 PM EET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Nov 3, 2010 5:35:20 PM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

    Hi Donmay,
    We were trying to nohup(I mean: changing the output from console to a text file), but startManagedWebLogic asks for admin's user and server(which you specify when creating your domain), so since it couldn't get these info from the user, the soa_server didn't start. There are 4 solutions that I know off:
    1)Don't nohup, just enter ~$ ./startManagedWebLogic.sh soa_server1
    2)Specify the user and passwd in startManagedWebLogic. The two variables are WLS_USER and WLS_PW
    3)Create a boot.password file in .../domain/bin and in the startManagedWebLogic add this -Dweblogic.system.BootIdentityFile="fileGoesHere" JAVA_OPTIONS (http://blogs.oracle.com/middleware/2010/05/weblogic_not_reading_bootproperties_1111x.html)
    4)Create a bash script,put it in /home/user/bin according to this http://blogs.oracle.com/reynolds/2010/03/cold_start.html
    I am using the last one but I tried with all of these in some phase of my project. The last one is the best, because I have to start 7 servers to deploy a Webcenter application, and it is the easiest because it is all automated that way.
    Sorry for the late reply, I have posted from my phone.

  • Authentication Failed: User xelsysadm javax.security.auth.login.FailedLogin

    Hi All,
    I have an critical ssue to be solved on Production environemt :(,
    we have oim installed on cluster in production(OIM11g installed on server ), the configuration is as mentioned below
    cluster 1--oim1,soa1--server1--holds admin server
    cluster 2--oim2,soa2--server2--managed server and no admin server
    This instance was working fine, we had to restart the server machine for some reason and i am not able to start OIM server :( after that.
    following is the exception i get when i start the OIM server , Please help :(
    2011-05-13T13:42:29.585+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] ADFApplicationLifecycleListener.preStop. Cleaning up Application caches.
    [2011-05-13T13:42:29.585+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] Clean up Application Caches
    [2011-05-13T13:42:29.585+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] ADFConfigFactory.cleanUpApplicationCaches. Calling ADF Config instance implementation: class oracle.adf.share.config.MDSConfigImpl.releaseResources()
    [2011-05-13T13:42:29.600+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] ADFConfigFactory.cleanUpApplicationCaches. Calling ADF Config instance implementation: class oracle.adf.share.config.MDSConfigImpl.releaseResources()
    [2011-05-13T13:42:29.600+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] ADFConfigFactory.cleanUpApplicationCaches. Calling ADF Config instance implementation: class oracle.adf.share.config.MDSConfigImpl.releaseResources()
    [2011-05-13T13:42:29.600+05:30] [wls_oim1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] ADFConfigFactory.cleanUpApplicationCaches. Calling ADF Config instance implementation: class oracle.adf.share.config.MDSConfigImpl.releaseResources()
    [*2011-05-13T13:42:30.193+05:30] [wls_oim1] [ERROR] [] [OIM Authenticator] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] Error while retrieving user xelsysadm*
    *[2011-05-13T13:42:30.224+05:30] [wls_oim1] [ERROR] [IAM-0020011] [oracle.iam.platform.auth.client] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IzcQVWHFo2w6wFNa6G1DhbE300075k,0] [APP: oim#11.1.1.3.0] Login Exception encountered when trying to login as admin {0}[[*
    *javax.security.auth.login.LoginException: javax.security.auth.login.LoginException: java.lang.SecurityException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied*
    at weblogic.security.auth.login.UsernamePasswordLoginModule.login(UsernamePasswordLoginModule.java:199)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:684)
    at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
    at Thor.API.Security.LoginHandler.weblogicLoginHandler.login(weblogicLoginHandler.java:62)
    at oracle.iam.platform.OIMClient.login(OIMClient.java:134)
    at oracle.iam.platform.OIMClient.login(OIMClient.java:114)
    at oracle.iam.platform.OIMInternalClient.loginAsAdmin(OIMInternalClient.java:69)
    at oracle.iam.scheduler.impl.util.SchedulerUtil.getSchedulerService(SchedulerUtil.java:735)
    at oracle.iam.scheduler.webapp.SchedulerStartupServlet.resetRunningJobStatus(SchedulerStartupServlet.java:247)
    at oracle.iam.scheduler.webapp.SchedulerStartupServlet.stopScheduler(SchedulerStartupServlet.java:123)
    at oracle.iam.scheduler.webapp.SchedulerStartupServlet.destroy(SchedulerStartupServlet.java:261)
    at weblogic.servlet.internal.StubSecurityHelper$ServletDestroyAction.run(StubSecurityHelper.java:303)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.StubSecurityHelper.destroyServlet(StubSecurityHelper.java:81)
    at weblogic.servlet.internal.StubLifecycleHelper.destroyOneInstance(StubLifecycleHelper.java:144)
    at weblogic.servlet.internal.StubLifecycleHelper.destroy(StubLifecycleHelper.java:134)
    at weblogic.servlet.internal.ServletStubImpl.destroy(ServletStubImpl.java:438)
    at weblogic.servlet.internal.WebAppServletContext.destroyServlets(WebAppServletContext.java:3232)
    at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:3192)
    at weblogic.servlet.internal.ServletContextManager.destroyContext(ServletContextManager.java:241)
    at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:461)
    at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:1540)
    at weblogic.servlet.internal.WebAppModule.deactivate(WebAppModule.java:513)
    at weblogic.application.internal.flow.ModuleStateDriver$2.previous(ModuleStateDriver.java:389)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:160)
    at weblogic.application.internal.flow.ModuleStateDriver.deactivate(ModuleStateDriver.java:141)
    at weblogic.application.internal.flow.ScopedModuleDriver.deactivate(ScopedModuleDriver.java:207)
    at weblogic.application.internal.flow.ModuleListenerInvoker.deactivate(ModuleListenerInvoker.java:261)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$2.previous(DeploymentCallbackFlow.java:538)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:160)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:182)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:175)
    at weblogic.application.internal.BaseDeployment$2.previous(BaseDeployment.java:1281)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
    at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:160)
    at weblogic.application.internal.BaseDeployment.deactivate(BaseDeployment.java:453)
    at weblogic.application.internal.EarDeployment.deactivate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.deactivate(DeploymentStateChecker.java:199)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.deactivate(AppContainerInvoker.java:98)
    at weblogic.deploy.internal.targetserver.BasicDeployment.deactivate(BasicDeployment.java:263)
    at weblogic.deploy.internal.targetserver.BasicDeployment.deactivateFromServerLifecycle(BasicDeployment.java:458)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doDeactivate(DeploymentAdapter.java:74)
    at weblogic.management.deploy.internal.DeploymentAdapter.deactivate(DeploymentAdapter.java:215)
    at weblogic.management.deploy.internal.AppTransition$6.transitionApp(AppTransition.java:67)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deactivate(ConfiguredDeployments.java:199)
    at weblogic.management.deploy.internal.ConfiguredDeployments.undeploy(ConfiguredDeployments.java:191)
    at weblogic.management.deploy.internal.DeploymentServerService.shutdownApps(DeploymentServerService.java:195)
    at weblogic.management.deploy.internal.DeploymentServerService.shutdownHelper(DeploymentServerService.java:127)
    at weblogic.application.ApplicationShutdownService.stop(ApplicationShutdownService.java:106)
    at weblogic.t3.srvr.ServerServicesManager.stopInternal(ServerServicesManager.java:495)
    at weblogic.t3.srvr.ServerServicesManager.stop(ServerServicesManager.java:316)
    at weblogic.t3.srvr.T3Srvr.shutdown(T3Srvr.java:1036)
    at weblogic.t3.srvr.T3Srvr.gracefulShutdown(T3Srvr.java:939)
    at weblogic.t3.srvr.GracefulShutdownRequest.run(GracefulShutdownRequest.java:41)
    at weblogic.work.ContextWrap.run(ContextWrap.java:41)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Thanks in advance

    Agreed with all above pointers.
    I think you have to raise SR with oracle, because it is prod environment.
    If you still want to do some R&D.
    1. Also check this URL might help, but not sure.
    http://download.oracle.com/docs/cd/E21764_01/doc.1111/e14308/handlinglcm.htm#CIAJCEEF
    http://download.oracle.com/docs/cd/E21764_01/doc.1111/e14308/handlinglcm.htm#CIAEFAGF
    2. Restart all servers (along with Admin server and DB).

  • Check_ntlm_password:  Authentication for user ['name'] - ['name'] FAILED with error NT_STATUS_LOGON_FAILURE

    Hi,
    We are running a Mountain Lion Server with Open Directory / LDAPv3, as far as I can tell.  My responsibility is to get my CentOS 6.3 box running Samba v. 3.5.10-125.el6 to authenticate users against the ML / OD box.  I can ssh to the CentOS box OK and I can get Guest access to the Samba share to go OK too.  Also, the OD passwords on the LDAP server are set to 'Open Directory' so I guess that means that they are encrypted and the Samba server is set to send encrypted passwords.  But when a user tries to properly authenticate using either say via a Mac client Finder [Command-K], or smbclient, the Samba server will generate this message:
    check_ntlm_password:  Authentication for user ['name'] -> ['name'] FAILED with error NT_STATUS_LOGON_FAILURE
    (I am blanking out the user name on purpose).
    Of course there is more to the story, but those are the basics.
    Here are the relevant parts of my smb.conf.  FWIW, the CentOS / Samba box is called Jupiter.
    Thank you,
    NickZ
    [smb.conf]
    [global]
              display charset = UTF-8
              realm = SATURN.MCLEAN.HARVARD.EDU
              netbios aliases = ANL
              server string = Welcome To The Jupiter Samba Server Version 3.5.10-125.el6
              interfaces = lo, em1
              security = SERVER
              update encrypted = Yes
              password server = saturn.mclean.harvard.edu
              smb passwd file = /var/lib/samba/private/secrets.tdb
              passdb backend = ldapsam:ldap://saturn.mclean.harvard.edu
              passwd program = /usr/bin/passwd %u
              unix password sync = Yes
              lanman auth = Yes
              client NTLMv2 auth = Yes
              client use spnego principal = Yes
              kerberos method = system keytab
              log level = 2
              syslog = 3
              log file = /var/log/samba/log.%m
              max log size = 50
              name resolve order = host lmhosts wins bcast
              server signing = auto
              preferred master = Auto
              ldap admin dn = uid=DirAdmin,cn=users,dc=saturn,dc=mclean,dc=harvard,dc=edu
              ldap group suffix = cn=groups
              ldap passwd sync = yes
              ldap suffix = dc=saturn,dc=mclean,dc=harvard,dc=edu
              ldap ssl = no
              ldap user suffix = cn=users
              usershare allow guests = Yes
              idmap backend = ldap:ldap://saturn.mclean.harvard.edu
              idmap uid = 10000-20000
              idmap gid = 30000-40000
              cups options = raw
    [homes]
              comment = Home Directories
              read only = No
    [printers]
              comment = All Printers
              path = /var/spool/samba
              printable = Yes
              browseable = No
    [anl]
              comment = Main ANL Share
              path = /anl
              read only = No
              guest ok = Yes
              hide dot files = No

    Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
    Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.

  • Machine Authentication and User Authentication with ACS v5.1... how?

    Hi!
    I'm having trouble setting up Machine Authentication and User Authentication on ACS v5.1 using WinXP SP3 (or SP2) as supplicant.
    This is the goal:
    On wireless (preferably on wired too) networks, get the WinXP to machine authenticate against AD using certificates so the machine is possible to reach via for example ping, and it can also get GPO Updates.
    Then, when the user actually logs in, I need User Authentication, so we can run startup scripts, map the Home Directory and so on.
    I have set up a Windows Sertificate server, and the client (WinXP) are recieving both machine and user certificates just fine.
    I have also managed to set up so Machine Authenticaton works, by setting up a policy rule that checks on certificate only:
    "Certificate Dictionary:Common Name contains .admin.testdomain.lan"
    But to achieve that, I had to set EAP Type in WinXP to Smart Card or other Certificate, and then no PEAP authentication occurs, which I assume I need for User Authentication? Or is that possible by using Certificates too?
    I just don't know how to do this, so is there a detailed guide out there for this? I would assume that this is something that all administrators using wireless and WinXP would like to achieve.
    Thank you.

    Hello again.
    I found out how to do this now..
    What I needed to do was to add a new Certificate Authentication Profile that checks against Subject Alternative Name, because that was the only thing I could find that was the same in both user certificate and machine certificate.
    After adding that profile to the Identity Store Sequences, and making tthe appropriate rule in the policy, it works.
    You must also remember to change the AuthMode option in Windows XP Registry to "1".
    What I really wanted to do was to use the "Was Machine Authenticated" condition in the policies, but I have never gotten that conditon to work, unfortunately.
    That would have plugged a few security holes for me.

  • Authentication for user guest denied

    I am connecting to two WL 6.0 sp2 servers. I am logging in both as guest.
    When I log into one or the other, everything works fine. However, when I
    log into both (and create InitialContext's for both), I get the following
    error:
    java.lang.SecurityException: Authentication for user guest denied in
    realm wl_realm
    at
    weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOutboundRe
    quest.java:90)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
    :247)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
    :225)
    at
    weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNode_WLStu
    b.java:121)
    at
    weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
    at javax.naming.InitialContext.lookup(Unknown Source)
    I tried synchronizing system passwords, accessing each server in a separate
    thread -- but nothing seems to work. Does anybody have any ideas?
    Interestingly, it seems to behave OK when one of the servers is WL 6.0 Beta.
    However, it breaks with sp1 and sp2.
    Thanks in advance,
    Jared

    Hi Jared,
    Are the 2 servers in the same cluster? What is your client? When and where do
    you see this SecurityException? Do you mean that when you try to get initial
    context you provide a username and password? Are you using any custom realm or
    just the default file realm?
    Joseph
    Jared Tuck wrote:
    I am connecting to two WL 6.0 sp2 servers. I am logging in both as guest.
    When I log into one or the other, everything works fine. However, when I
    log into both (and create InitialContext's for both), I get the following
    error:
    java.lang.SecurityException: Authentication for user guest denied in
    realm wl_realm
    at
    weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOutboundRe
    quest.java:90)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
    :247)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
    :225)
    at
    weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNode_WLStu
    b.java:121)
    at
    weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
    at javax.naming.InitialContext.lookup(Unknown Source)
    I tried synchronizing system passwords, accessing each server in a separate
    thread -- but nothing seems to work. Does anybody have any ideas?
    Interestingly, it seems to behave OK when one of the servers is WL 6.0 Beta.
    However, it breaks with sp1 and sp2.
    Thanks in advance,
    Jared--
    Joseph Nguyen
    Developer Relations Engineer
    BEA Systems, Inc.

  • Authentication for user weblogic denied

    I am unable to start node managerd server from command prompt.
    I installed WebLogic Server Version: 12.1.2.0.0 on Windows 2008 R2 EN Sp1
    I started Administration Server succesfully.
    C:\Weblogic\Oracle\config\domains\wl_server\bin\startWebLogic.cmd
    I created ihale Managed server but  I couldn't start Managed Server.
    C:\Weblogic\Oracle\config\domains\wl_server\bin
    startManagedWebLogic.cmd ihale http://192.168.1.29:7431 
    I'm getting following error.
    ####<Dec 25, 2013 12:51:13 AM PST> <Critical> <WebLogicServer> <umman> <ihale> <main> <<WLS Kernel>> <> <> <1387961473813> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied.
    weblogic.security.SecurityInitializationException: Authentication for user weblogic denied.
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
      at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:257)
    I am able to login administration console same username and password. Username: weblogic Password:xxxxx
    I changed the weblogic user password and I tried again. It was unseccesfull.
    I created boot.properties file in C:\Weblogic\Oracle\config\domains\wl_server\servers\ihale\security folder.
    I put username and password.
    After I tried to start ihale managed server, boot.properties file didn't encrypted and managed server also didn't started.
    I deleted cache, data, tmp folders except logs folder in \\192.168.1.29\c$\Weblogic\Oracle\config\domains\wl_server\servers\ihale and I tried again. It was unseccesfull.
    I found something on https://community.oracle.com/message/10653470
    Ganesh says:
    Did you restart AdminServer after deleting the LDAP Authentication provider?
    I think your managed server is still trying to authenticate user through ldap authentication provider.
    Torrado answers:
    I found that there was a definition in Security Policy of osb_server1 for an user that belonged to deleted LDAP authenticator.
    I deleted it and server started.
    Thanks.
    How can I delete definition in Security Policy of ihale for an user that belonged to deleted LDAP authenticator?
    Could you please help to solve this problem?
    Best Regards.

    Hi,
    You can rename the ldap folder in following directory structure.
    %Domain_Name% / servers / <servername> / data/
    You will find ldap folder try to rename that folder and then please restart the server again.
    If you are try to start through nodemanager then rename the nodemanager under following directory.
    %Domain_Name% / servers / <servername> / data/.
    Try to rename these two folder and restart the nodemanager and start the server again.
    It will work for you.
    Regards,
    Kal

  • Weblogic patch for the "Authentication for user wlsadmin denied" issue

    Hi Everyone,
    When I try to login to the weblogic console using the weblogic user id and password, I got below issue in the production server..Sometime back I saw a thread that Oracle has provided a patch for this issue. If any of you is aware of it then could you please provide us the patch file and its location please. This is quite a bit urgent. Awaiting for your response. Thanks in advance.
    <Apr 3, 2011 10:41:02 PM ICT> <Critical> <Security> <BEA-090403> <Authentication for user wlsadmin denied>
    <Apr 3, 2011 10:41:02 PM ICT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user wlsadmin denied
    I need to communicate to onsite members about the patch details etc.
    Edited by: user11290902 on May 13, 2011 1:27 AM

    Faisal, Thank you for your response. Here the weblogic console id & password are known to few people so the guess you are making might be correct. Could anyone might have tried with incorrect credentials couple of times before we face this issue, I am not sure though. The moment we provide the credentials and upon click on Log In button we are getting j_security_check.
    http://asdo0002:9683/console/j_security_check
    Authentication Denied.
    The username or password has been refused by WebLogic Server. Please try again.
    Any information about the work--arounds or patches from weblogic would be helpful to me... Thanks a lot.

  • Java.lang.SecurityException: Authentication for user system denied in realm wl_realm Error.

              Getting this security exception when trying to pull a message from one weblogic
              instance JMS queue, and sending the message (via a MDB) to another machine's JMS
              queue.
              Ex. Here's the scenario.
              Two Windows2000Server machines,
              one at ip ... xxx.xxx.x.16,
              second machine at ... xxx.xxx.x.17.
              MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
              ON the .17 machine (the receiver) I get the following exception
              weblogic.transaction.internal.CoordinatorImpl@31406b>
              java.lang.SecurityException: Authentication for user system denied in realm wl_realm
                   at weblogic.security.acl.Realm.authenticate(Realm.java:212)
                   at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
                   at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
                   at weblogic.security.acl.internal.Security.verify(Security.java:87)
                   at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
                   at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              ON the sending maching .16, I get the following exception.
              ####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
              <ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
              for: '-1'>
              The messages appear to show up on the destination machine, but are these error
              messages valid, or just bogus?
              Thanks,
              Eric.
              

    Why is that? Your suggestion worked but I don't understand why.
              When our MDB on machineA did the JNDI lookup to MachineB we set the
              credentials to a valid user/password on MachineB.
              My speculation: Since the MDB on machineA is already in a transaction
              any other JNDI calls use the credentials for the MDB's transactions,
              ignoring any other credentials we might try to set explicitly. If my
              speculation is correct then that would explain by the passwords for the
              user "system" would have to be the same between servers.
              Is there a good place to read up on this?
              Thanks
              Tom
              Rajesh Mirchandani wrote:
              > Make sure you have the same system password for the 2 instances of WLS on seperate boxes.
              >
              > Tom Barnes wrote:
              >
              >
              >>Or post to the EJB newsgroup (which "owns" MDBs).
              >>
              >>Tom Barnes wrote:
              >>
              >>
              >>>I think there is a username/password field configurable in the MDB descriptor that
              >>>might help here??? Other than that, I suggest posting to the security newsgroup.
              >>>
              >>>Tom
              >>>
              >>>Eric Babin wrote:
              >>>
              >>>
              >>>>Getting this security exception when trying to pull a message from one weblogic
              >>>>instance JMS queue, and sending the message (via a MDB) to another machine's JMS
              >>>>queue.
              >>>>
              >>>>Ex. Here's the scenario.
              >>>>
              >>>> Two Windows2000Server machines,
              >>>> one at ip ... xxx.xxx.x.16,
              >>>> second machine at ... xxx.xxx.x.17.
              >>>>
              >>>> MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
              >>>>
              >>>>
              >>>>ON the .17 machine (the receiver) I get the following exception
              >>>>
              >>>>weblogic.transaction.internal.CoordinatorImpl@31406b>
              >>>>java.lang.SecurityException: Authentication for user system denied in realm wl_realm
              >>>> at weblogic.security.acl.Realm.authenticate(Realm.java:212)
              >>>> at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
              >>>> at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
              >>>> at weblogic.security.acl.internal.Security.verify(Security.java:87)
              >>>> at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
              >>>> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
              >>>> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
              >>>> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              >>>>
              >>>>ON the sending maching .16, I get the following exception.
              >>>>
              >>>>####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
              >>>><ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
              >>>>for: '-1'>
              >>>>
              >>>>The messages appear to show up on the destination machine, but are these error
              >>>>messages valid, or just bogus?
              >>>>
              >>>>Thanks,
              >>>>
              >>>>Eric.
              >>>>
              >
              > --
              > Rajesh Mirchandani
              > Developer Relations Engineer
              > BEA Support
              >
              >
              >
              

  • Java.lang.SecurityException: Authentication for user test1 denied in realm wl_realm

    Environment: WLS61 SP2
    Two WLS61 servers on different machines. User test1 is authenticated against LDAP
    on server_1, then tries
    to execute a class (from JSP) that calls EJB on server_2. The environment properties
    for the call to EJB on server_2 to are setup as follows (Note that user test2 is
    used to call EJB on server_2. User test2 exists in the wl_realm on server2):
    env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
    env.put(Context.PROVIDER_URL, "t3://server2:7001");
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "test2");
    env.put(Context.SECURITY_CREDENTIALS, "somepass");
    The call results in the following exception raised on server_2. Why is test1 id used
    if test2 is explicitly specified for the call? User test1 does not exist on server_2.
    <Jul 13, 2002 11:37:31 AM EDT> <Warning> <Dispatcher> <RuntimeException thrown by
    rmi server: 'weblo
    gic.rmi.cluster.ClusterableServerRef@111 - jvmid: '4783591120128354231S:xxx.xxx.xxx.xxx:[7001,7001,7002,7
    002,7001,7002,-1]:mydomain:myserver', oid: '271', implementation: '[BaseEJBObject]
    home: c
    om.test.TestEJB_jvjalv_HomeImpl@7583b9''
    java.lang.SecurityException: Authentication for user test1 denied in realm wl_realm
    at weblogic.security.acl.Realm.authenticate(Realm.java:212)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
    at weblogic.security.acl.internal.Security.verify(Security.java:87)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:237)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    If you are using JNDI authentication, make sure you close the context before
    you get another context.
    In WLS, stack of authenticated users will be maintained per thread. Now when
    user is authenticated, it will be pushed into the stack. When you close the
    context it will be popped out. In your case it seems like somehow test1 user's
    idenitity is set on the thread which is calling the EJB on server2.
    use weblogic.security.acl.Security.getCurrentUser() to get the current
    user associated with the thread.
    I hope this helps.
    -utpal

  • Java.lang.SecurityException: Authentication for user system denied in realm weblogic

    I am looking for some help to deploy the application in weblogic6.0.
    This is what i did during the application deployment.
    Create a new directory under config as a new application.
    D:\bea\wlserver6.0\config\test
    under test created two other directories applications and logs.
    Under the applications directory copied .ear and .war files.
    Under the test i copied config.xml, all the *.pem starttest.cmd, fileRealam.properties
    files. Modified the config.xml with my application, domain and the server. Modified
    the settest.cmd with the new domain and server name.
    when i do startup, it is prompting for the password and i entered what ever i mentioned
    during the installation.
    And getting the following error.
    Thanks alot for any suggestions.
    D:\bea\wlserver6.0\config\test>startTest.cmd
    D:\bea\wlserver6.0>set PATH=.\bin;D:\bea\jdk130\bin;C:\RATIONAL\RATION~1\NUTCROO
    T\bin;C:\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\RATIONAL\RATION~1\NUTCROOT\mksnt;
    C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Dell\Resoluti
    on Assistant\Common\bin;C:\PROGRA~1\MICROS~4\Office;C:\PROGRA~1\ULTRAE~1;C:\Rati
    onal\common;C:\Rational\Rational Test;C:\jdk1.3\bin;C:\Ant\bin;
    D:\bea\wlserver6.0>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
    D:\bea\wlserver6.0>D:\bea\jdk130\bin\java -hotspot -ms64m -mx64m -classpath .;.\
    lib\weblogic_sp.jar;.\lib\weblogic.jar -Dweblogic.Domain=test -Dweblogic.Name=te
    stServer -Dbea.home=D:\bea -Dcloudscape.system.home=./samples/eval/cloudscape/da
    ta -Djava.security.policy==D:\bea\wlserver6.0/lib/weblogic.policy weblogic.Serve
    r
    Enter password to boot weblogic server:password
    Starting WebLogic Server ....
    <Feb 14, 2001 12:13:04 PM EST> <Notice> <Management> <Loading configuration file
    .\config\test\config.xml ...>
    <Feb 14, 2001 12:13:06 PM EST> <Info> <Logging> <Only log messages of severity "
    Error" or worse will be displayed in this window. This can be changed at Admin C
    onsole> test> Servers> testServer> Logging> Debugging> Stdout severity threshold
    >
    <Feb 14, 2001 12:13:08 PM EST> <Emergency> <Server> <Unable to initialize the se
    rver: 'Fatal initialization exception
    Throwable: java.lang.SecurityException: Authentication for user system denied in
    realm weblogic
    java.lang.SecurityException: Authentication for user system denied in realm webl
    ogic
    at weblogic.security.acl.Realm.authenticate(Realm.java:209)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:11
    3)
    at weblogic.security.SecurityService.initializeSuid(SecurityService.java
    :293)
    at weblogic.security.SecurityService.initialize(SecurityService.java:123
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
    at weblogic.Server.main(Server.java:35)
    '>
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.SecurityException: Authentication for user system de
    nied in realm weblogic
    java.lang.SecurityException: Authentication for user system denied in realm webl
    ogic
    at weblogic.security.acl.Realm.authenticate(Realm.java:209)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:11
    3)
    at weblogic.security.SecurityService.initializeSuid(SecurityService.java
    :293)
    at weblogic.security.SecurityService.initialize(SecurityService.java:123
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    D:\bea\wlserver6.0>goto finish
    D:\bea\wlserver6.0>cd config\test
    D:\bea\wlserver6.0\config\test>ENDLOCAL
    D:\bea\wlserver6.0\config\test>

    Seen this, may give a clue?
    Server Known Problems Change Request Number Description
    042556
    The weblogic.Admin command now requires the user and password options. For example:
    java weblogic.Admin -username system -password gumby1234
    The username "system" is required for most functions (for example: VERSION). If
    you do not specify -username system, you will get the following error:
    Exception in thread "main" java.lang.SecurityException: Authentication for user
    system denied in realm weblogic
    <<no stack trace available>>
    "lazar" <[email protected]> wrote:
    >
    I would also like to know, if there is a fix for it.
    Thanks
    Lazar
    Greg Layton <[email protected]> wrote:
    Did you ever get an answer to this. If so could you share it with me.ThanksGreg

  • Javax.naming.AuthenticationException.  Root exception is java.lang.SecurityException: Authentication for user system denied in realm weblogic

    We have started getting the above error message in a system that has worked happily
    for the past 6 months or so (and continues to work happily from our disaster recovery
    environment). I should probably add that this occurs when we are attempting to
    write to the database via the connection pool.
    Anyone have any ideas?
    Thanks
    Andrew
    The full stack trace is
    javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
    Authentication for user system denied in realm weblogic
         <<no stack trace available>>
    31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
    thrown by rmi server(class com.esure.ibis.a
    ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
    [265127279722
    6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
    prdwls/296]: [BaseEJBObject]
    home: com.esure.ibis.accesslaye
    r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
    com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
    Bean::validateUser()
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
         at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
         at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
         at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
         at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    We have started getting the above error message in a system that has worked happily
    for the past 6 months or so (and continues to work happily from our disaster recovery
    environment). I should probably add that this occurs when we are attempting to
    write to the database via the connection pool.
    Anyone have any ideas?
    Thanks
    Andrew
    The full stack trace is
    javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
    Authentication for user system denied in realm weblogic
         <<no stack trace available>>
    31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
    thrown by rmi server(class com.esure.ibis.a
    ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
    [265127279722
    6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
    prdwls/296]: [BaseEJBObject]
    home: com.esure.ibis.accesslaye
    r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
    com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
    Bean::validateUser()
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
         at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
         at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
         at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
         at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
         at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • Authentication for user System denied

    hi,installed weblogic6.0, and everthing seemed to go ok but upon starting the server i get java.lang.securityException authentication for user system denied in realm weblogicI am prompted to enter the system password whilst the server is loading which I enter to be the same as I supplied on the installation when providing a password for the 'System' user. Is it the password that it is objecting to, if so what realm or properties file needs editing and what entry must be supplied ? Any help, much appreciated.Also the 'realm weblogic' file is located ?rob.

    Make sure you have provided the right password.
    "Vidyananda Eswaran" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    I get this "Authentication for user system denied" error when i start
    the admin server in weblogic. It actually prompts for a password and after
    that it just shuts down. Can anyone help me on this.
    Eshwar.

  • Authentication for user system denied in realm wl_realm

              HI,
              When I try to start a managed server in clustered environment,
              I get this error :
              java.lang.SecurityException: Authentication for user system denied in realm wl_realm
              at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
              at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:133)
              at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
              at $Proxy7.getMBean(Unknown Source)
              at weblogic.management.Admin.getDomain(Admin.java:1229)
              at weblogic.cluster.MulticastSender.<init>(MulticastSender.java:136)
              at weblogic.cluster.MulticastManager.createSender(MulticastManager.java:159)
              at weblogic.cluster.MulticastManager.createSender(MulticastManager.java:154)
              at weblogic.cluster.MulticastManager.<init>(MulticastManager.java:109)
              at weblogic.cluster.MulticastManager.initialize(MulticastManager.java:70)
              at weblogic.cluster.ClusterService.initialize(ClusterService.java:119)
              at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:477)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
              at weblogic.Server.main(Server.java:35)
              Could you, please, help me figure out what's wrong with this ?
              Thank you,
              rivisa
              

    Make sure you supply the correct system password (the password used by the admin server) when
              starting the managed server.
              rivisa wrote:
              > HI,
              >
              > When I try to start a managed server in clustered environment,
              > I get this error :
              > java.lang.SecurityException: Authentication for user system denied in realm wl_realm
              > at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
              > at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:133)
              > at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
              > at $Proxy7.getMBean(Unknown Source)
              > at weblogic.management.Admin.getDomain(Admin.java:1229)
              > at weblogic.cluster.MulticastSender.<init>(MulticastSender.java:136)
              > at weblogic.cluster.MulticastManager.createSender(MulticastManager.java:159)
              > at weblogic.cluster.MulticastManager.createSender(MulticastManager.java:154)
              > at weblogic.cluster.MulticastManager.<init>(MulticastManager.java:109)
              > at weblogic.cluster.MulticastManager.initialize(MulticastManager.java:70)
              > at weblogic.cluster.ClusterService.initialize(ClusterService.java:119)
              > at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:477)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
              > at weblogic.Server.main(Server.java:35)
              >
              > Could you, please, help me figure out what's wrong with this ?
              >
              > Thank you,
              > rivisa
              

Maybe you are looking for