Authentication Policy ISE with External RADIUS Server

Hi All,
I would like to authenticate client by using External RADIUS. Once I create authentication policy using the new compound condition (wireless dot1x + Radius Username Matches "domainB\") I would like to forward the user authentication who make an authen using domainB\username to the External RADIUS Server Sequence. But when I check on the authentication dashboard, it still authenticate using the default authentication rule.
Please suggest about this scenario.
Regards,
Sent from Cisco Technical Support Android App

Hi jrabinow,
Which details you would like to see ?
Here is some infos.
ISEs are deployed in 2 domains such as "acme.com" and "sub.acme.com"
Each domain does not make a trusted relationship so these 2 domains cannot communicate between them.
Each domain has owned Enterprise Root CA (Microsoft)
Client who need to access the network need to authenticate with EAP-TLS.
My environment
My ISE node joined into domain "acme.com"
User will be "[email protected]"
Once the user from "[email protected]" try to authenticate, I would like to forward the RADIUS request from ISEs (acme.com) to other ISEs (sub.acme.com)
After ISEs in "sub.acme.com" return RADIUS-ACCEPT then ISEs in "acme.com" will process an authorization policy.
Regards,
Pongsatorn

Similar Messages

WLC Web-auth fail with external RADIUS server

I follow step by step the link bellow to configure web-auth with external RADIUS server but I receive a error on console debug of the WLC "Returning AAA Error No Server (-7) for mobile"
My Radius Server is fine, because I can authenticate on WLC Web page with RADIUS user.
WLC 4402 version 4.1.171.0
http://www.cisco.com/en/US/products/ps6366/prod_technical_reference09186a0080706f5f.html

Hi,
I am having some issues when I try to authenticate an AD account against a NAP Radius Server on Windows 2008.
In fact, I own a WLC 2106 and I configured it to authenticate users againts a radius Server with Active Directory. I set the Web Radius Authentication to CHAP on the controller tab from the WLC 2106 and i am getting the error below
: Authentication failed for gcasanova. When I set the controller to Web Radius Authentication to PAP, everything is working fine. I am able to connect to through the controller using an AD Account. But my purpose is not use PAP which is an unsecure protocol since password are sent as plaintext on the network.
Can someone tell me what's wrong?
*radiusTransportThread: Oct 26 11:02:13.975:    proxyState......................                                                                                                 .............00:24:D7:40:E5:00-00:00
*radiusTransportThread: Oct 26 11:02:13.975:    Packet contains 0 AVPs:
*emWeb: Oct 26 11:02:13.977: Authentication failed for gcasanova
*aaaQueueReader: Oct 26 11:02:29.985: AuthenticationRequest: 0xb6564634
*aaaQueueReader: Oct 26 11:02:29.985:   Callback.....................................0x8576720
*aaaQueueReader: Oct 26 11:02:29.985:   protocolType.................................0x00000001
*aaaQueueReader: Oct 26 11:02:29.985:   proxyState...................................00:24:D7:40:E5:00-00:00
*aaaQueueReader: Oct 26 11:02:29.986:   Packet contains 11 AVPs (not shown)
*aaaQueueReader: Oct 26 11:02:29.986: apfVapRadiusInfoGet: WLAN(4) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
*aaaQueueReader: Oct 26 11:02:29.986: 00:24:d7:40:e5:00 Successful transmission of Authentication Packet (id 86) to 10.2.0.15:1812, proxy state 00:24:d7:40:e5:00-00:00
*aaaQueueReader: Oct 26 11:02:29.987: 00000000: 01 56 00 9a 8e 48 e7 20 1d ef be 29 e6 3a 61 6d .V...H.....).:am
*aaaQueueReader: Oct 26 11:02:29.987: 00000010: 2b de 07 24 01 0b 67 63 61 73 61 6e 6f 76 61 3c +..$..gcasanova<
*aaaQueueReader: Oct 26 11:02:29.987: 00000020: 12 3c ce a0 87 ac df 7a a5 35 af 7c ef 83 c7 58 .<.....z.5.|...X
*aaaQueueReader: Oct 26 11:02:29.987: 00000030: ed 03 13 28 a7 5a 0d 26 6d ab 49 ea da 7c 5a 8e ...(.Z.&m.I..|Z.
*aaaQueueReader: Oct 26 11:02:29.987: 00000040: 1d 94 70 69 06 06 00 00 00 01 04 06 0a 02 00 06 ..pi............
*aaaQueueReader: Oct 26 11:02:29.987: 00000050: 05 06 00 00 00 01 20 0a 50 41 52 2d 57 4c 43 31 ........PAR-WLC1
*aaaQueueReader: Oct 26 11:02:29.987: 00000060: 3d 06 00 00 00 13 1a 0c 00 00 37 63 01 06 00 00 =.........7c....
*aaaQueueReader: Oct 26 11:02:29.988: 00000070: 00 04 1f 0c 31 30 2e 32 2e 30 2e 31 35 36 1e 0a ....10.2.0.156..
*aaaQueueReader: Oct 26 11:02:29.988: 00000080: 31 30 2e 32 2e 30 2e 36 50 12 7f 86 5a c5 61 ad 10.2.0.6P...Z.a.
*aaaQueueReader: Oct 26 11:02:29.988: 00000090: af 54 fa fa 42 e7 f6 16 9e 10                    .T..B.....
*radiusTransportThread: Oct 26 11:02:29.988: 00000000: 03 56 00 14 a9 10 07 84 83 00 87 83 b9 10 64 e1 .V............d.
*radiusTransportThread: Oct 26 11:02:29.988: 00000010: 66 b3 c5 5e                                       f..^
*radiusTransportThread: Oct 26 11:02:29.988: ****Enter processIncomingMessages: response code=3
*radiusTransportThread: Oct 26 11:02:29.988: ****Enter processRadiusResponse: response code=3
*radiusTransportThread: Oct 26 11:02:29.988: 00:24:d7:40:e5:00 Access-Reject received from RADIUS server 10.2.0.15 for mobile 00:24:d7:40:e5:00 receiveId = 0
*radiusTransportThread: Oct 26 11:02:29.989: 00:24:d7:40:e5:00 Returning AAA Error 'Authentication Failed' (-4) for mobile 00:24:d7:40:e5:00
*radiusTransportThread: Oct 26 11:02:29.989: AuthorizationResponse: 0xb97fe774
*radiusTransportThread: Oct 26 11:02:29.989:    structureSize................................32
*radiusTransportThread: Oct 26 11:02:29.989:    resultCode...................................-4
*radiusTransportThread: Oct 26 11:02:29.989:    protocolUsed.................................0xffffffff
*radiusTransportThread: Oct 26 11:02:29.989:    proxyState...................................00:24:D7:40:E5:00-00:00
*radiusTransportThread: Oct 26 11:02:29.989:    Packet contains 0 AVPs:

Configuring Cisco ISE for Authorization with External Radius Server attribute

Hi,
I'm trying to integrate an external radius server with Cisco ISE.
I created an External Identity Store>Radius Token Server.
I created a Identity Store sequence with just one identity store just as creadted above.
And I was able to authenticate successfully.
But when it comes to authorization.
I observed we just have one tab named Authorization while creating Radius Token server.
And it always refers to ACS:attribute_name.
If I want to define a IETF radius attribute, (lets say class with attribute id as 25), how could I do it.
In Cisco ACS we have a direct entry option in authorization tab where we can define the radius (IETF) attribute within Radius token server creation (within radius token server>Directory attribute tab).
How ever I try to define the IETF attribute here (class,IETF:Class) I am not able to authorize with this attribute value.
I tried with just one single authorization rule where it could hit.But observed it to go the default(as none of the rules defined matches the condition).
Can anyone guide me how can we define a IETF radius attribute for authorization within Cisco ISE and what policy could we set it to work as authorization.
Thanks in advance
Senthil K

This is the step of Creating and Editing RADIUS Vendors
To create and edit a RADIUS vendor, complete the following steps:
Step 1 From the Administration mega menu, choose Resources > RADIUS Vendors.
The RADIUS Vendors page appears with a list of RADIUS vendors that ISE supports.
Step 2 Click Create to create a new RADIUS vendor or click the radio button next to the RADIUS vendor that
you want to edit and click Edit.
Step 3 Enter the following information:
• Name—(Required) Name of the RADIUS vendor.
• Description—An optional description for the vendor.
• Vendor ID—(Required) The Internet Assigned Numbers Authority (IANA)-approved ID for the
vendor.
• Vendor Attribute Type Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute type. Valid values are 1, 2, and 4. The default value is 1.
• Vendor Attribute Size Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute length. Valid values are 0 and 1. The default value is 1.
Step 4 Click Submit to save the RADIUS vendor.

Authenticated on ISE 1.2 (as admin) against an external radius server

Hello
Our customer wants to be authenticated on ISE 1.2 (as admin) against an external radius server (like ACS not microsoft). How could i do that ?
Is it possible while retaining internal admin users database in a sequence "external_radius or internal"
thank you in advance.
Best regards

External authentication is supported only with internal authorization:
External Authentication + Internal Authorization
When configuring Cisco ISE to provide administrator authentication using an external RSA SecurID identity store, administrator credential authentication is performed by the RSA identity store. However, authorization (policy application) is still done according to the Cisco ISE internal database. In addition, there are two important factors to remember that are different from External Authentication + External Authorization:
You do not need to specify any particular external administrator groups for the administrator.
You must configure the same username in both the external identity store and the local Cisco ISE database.
To create a new Cisco ISE administrator that authenticates via the external identity store, complete the following steps:
Step 1 Choose Administration > System > Admin Access > Administrators > Local Administrators.
The Administrators window appears, listing all existing locally defined administrators.
Step 2 Follow the guidelines at Creating a New Cisco ISE Administrator to ensure that the administrator username on the external RSA identity store is also present in Cisco ISE. Be sure to click the External option under Password.
Note Remember: you do not need to specify a password for this external administrator user ID, nor are you required to apply any specially configured external administrator group to the associated RBAC policy.
Step 3 Click Save .

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

ISE 1.2 Patch 2 External RADIUS Server Sequence Broken?

Hi community,
We have upgraded our proof of concept ISE 1.2 lab to Patch level 2.
Our lab design includes the use of external RADIUS servers which we off-load certain authentication rules to.
To ensure resiliency of the external RADIUS service, we have two of these which we add to a RADIUS Server Sequence, the idea being that if the first in the list is unavailable, ISE will try the second and all will be well.
Now this worked for us in testing ISE 1.2, but I have noticed that after the upgrade to Patch 2 ISE is sending the majority RADIUS traffic to the first (failed) external RADIUS server, with only the odd RADIUS Access-Request to thte next in the list.
Anybody else come across this??
All helpful comments rated!
Many thanks, Ash.

I couldn't find any known issues with this feature. Could you please paste the screen shot of external radius sequence and configuration. Also, how are we determing that the first server in the sequence is DEAD?
~BR
Jatin Katyal
**Do rate helpful posts**

Cisco ISE: External RADIUS Server

Hi,
I would like to forward RADIUS from PSN to another PSN. I already defined "External RADIUS Servers".
So, how can I use this external RADIUS server to process my request ?
Looking at the user guide but didn't find any information about this setting (For rule based not simple rule)
If anyone use this, please suggest this to me.
Thanks,
Pongsatorn

Defining an External RADIUS Server
The Cisco Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, the Cisco Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. The Cisco Cisco ISE accepts the results of the requests and returns them to the NAS. You must configure the external RADIUS servers in the Cisco Cisco ISE to enable it to forward requests to the external RADIUS servers. You can define the timeout period and the number of connection attempts.
The Cisco Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. This External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description or both.
To create an external RADIUS server, complete the following steps:
Step 1 Choose Administration > Network Resources > External RADIUS Servers.
The RADIUS Servers page appears with a list of external RADIUS servers that are defined in Cisco ISE.
Step 2 Click Add to add an external RADIUS server.
Step 3 Enter the values as described:
•Name—(Required) Enter the name of the external RADIUS server.
•Description—Enter a description of the external RADIUS server.
•Host IP—(Required) Enter the IP address of the external RADIUS server.
•Shared Secret—(Required) Enter the shared secret between Cisco Cisco ISE and the external RADIUS server that is used for authenticating the external RADIUS server. A shared secret is an expected string of text that a user must provide to enable the network device to authenticate a username and password. The connection is rejected until the user supplies the shared secret. The shared secret can be up to 128 characters in length.
•Enable KeyWrap—This option increases RADIUS protocol security via an AES KeyWrap algorithm, to help enable FIPS 140-2 compliance in Cisco ISE.
•Key Encryption Key—This key is used for session encryption (secrecy).
•Message Authenticator Code Key—This key is used for keyed HMAC calculation over RADIUS messages.
•Key Input Format—Specify the format you want to use to enter the Cisco ISE FIPS encryption key, so that it matches the configuration that is available on the WLAN controller. (The value you specify must be the correct [full] length for the key as defined below—shorter values are not permitted.)
–ASCII—The Key Encryption Key must be 16 characters (bytes) long, and the Message Authenticator Code Key must be 20 characters (bytes) long.
–Hexadecimal—The Key Encryption Key must be 32 bytes long, and the Message Authenticator Code Key must be 40 bytes long.
•Authentication Port—(Required) Enter the RADIUS authentication port number. The valid range is from 1 to 65535. The default is 1812.
•Accounting Port—(Required) Enter the RADIUS accounting port number. The valid range is from 1 to 65535. The default is 1813.
•Server Timeout—(Required) Enter the number of seconds that the Cisco Cisco ISE waits for a response from the external RADIUS server. The default is 5 seconds. Valid values are from 5 to 120.
•Connection Attempts—(Required) Enter the number of times that the Cisco Cisco ISE attempts to connect to the external RADIUS server. The default is 3 attempts. Valid values are from 1 to 9.
Step 4 Click Submit to save the external RADIUS server configuration.

Exchange Server 2013 with a RADIUS server (freeRADIUS).

Hello,
I am a student and doing an internship. I have to test Microsoft Exchange Server 2013.
I am using Windows Server 2012, I already installed Exchange Server 2013 on it and everything works as intended.
But I couldn't find out how to configure my Windows Server 2012 in order to authenticate my mailbox users from Exchange Server 2013 with a RADIUS server which is not on my Windows Server 2012. I have to use their RADIUS server (freeRADIUS), the RADIUS server
from the company where I am doing my internship.
I already created a NPS and added the RADIUS Client + Remote
RADIUS Server Groups. I created a Connection Request Policies with the condition:
User Name *
I forwarded the Connection Request to the
Remote RADIUS server that I created in Remote RADIUS Server Groups and then I registered the NPS in th AD. But it's still not working.
Maybe I did something wrong or I misunderstood something or does this even work with Exchange Server 2013? To authenticate mailbox users with a RADIUS server before they can login into their mailbox and use their mailbox?
Thanks in advance.

Hi,
I suggest we refer to the following article to double confirm the Network Policy Server is registered properly.
http://technet.microsoft.com/library/cc732912.aspx
Thanks,
Simon Wu
TechNet Community Support

OTP of ASDM using external radius server ( Not RSA )

Hello,
Just seeing if the ASDM will support OTP using an external radius server, and not RSA. I see there was a feature added to 8.2 that states its possible with RSA, but nothing of any other support. Just checking to see if someone know for sure.
Thanks,
Jason

I did see in the Release notes for ASDM 6.2, that SDI is support with RSA. Can anyone confirm or not if it works with Radius too ( OTP ).
http://www.cisco.com/en/US/docs/security/asdm/6_2/release/notes/asdmrn62.html

Authenticate Users against external RADIUS-Server

Hi,
i have some users in the local LDAP database of an 10.5 Server.
Is there a way to store their passwords on an external RADIUS-Server?
Thank you very much,
macservo
Message was edited by: macservo

CryptoCard does this.
We use it at one customer for L2TP VPN authentication.
This way the VPN user get's a yes or no to use the VPN server and then has to give his credentials: name and VPN shared secret or certificate (support for CryptoCard is in the OS X VPN client) to get on the network. The password is in 2 halves, one half is static and the rest is added to it from the Token.
You then have to authenticate to any service you want to use (Kerberos?).
We only had to alter a PPP config file on the OS X server and add a small file to both server (and client) to make it contact their Radius server instead of it using Apples regular internal VPN authentication (not the Radius one). And we had to add a shared secret corresponding to what was setup for the customer at CryptoCard (in the server only) for the OS X Server (Radius client) to CryptoCard server (Radius server) communication. You can't use Server Admin to alter VPN settings afterwards without messing up the PPP settings file.
Maybe possible to us it for Ethernet/Wireless 802.1X authentication too?
For just AFP server auth I don't know.

Dynamic WEP with Win2k3 Radius server

Can someone provide information as how to configure AP350 and AP1200 to use dynamic WEP with Win2k3 Radius server.
What security feature should be configured
If possible provide information for configuration of Win2k3 Radius server.

PEAP CHAPS,128-BIT or WPA

Synchronize with External NTP server.

Dear All Good morning,
Environment:
SunOS CSF-2 5.10 Generic_138888-03 sun4u sparc SUNW, Sun-Fire-V245 system.
Sun Cluster 3-2 Two node.
Question:
How to Synchronize Cluster timing with external NTP server/device? If external NTP device is down will have any impact in the cluster setup?

epmuneer wrote:
Question:
How to Synchronize Cluster timing with external NTP server/device?The configuration for NTP on Solaris Cluster is explained here:
[http://docs.sun.com/app/docs/doc/820-4676/cacbdgeg?l=en&a=view|http://docs.sun.com/app/docs/doc/820-4676/cacbdgeg?l=en&a=view]
and
[http://docs.sun.com/app/docs/doc/820-4677/cbhijhbh?l=en&a=view|http://docs.sun.com/app/docs/doc/820-4677/cbhijhbh?l=en&a=view]
If external NTP device is down will have any impact in the cluster setup?You should configure the cluster nodes as peers as well as getting the time from the external NTP server.
If the external NTP server fails, then time will drift, but at least the cluster nodes keep themselves in sync to have a consistent view.
Regards
Thorsten

ISE External radius server

Hello,
Since the JRS roam servers have to be put in a Radius Server sequence on ISE, which node IP address is meant to be registered with JANET, PAN or each PSN IP address. I would have thought it to be the PAN since all the external radius servers are configured on the PAN, but thought I should ask just to be sure. Thanks

Yes, even though the configuration is done on the PAN, only the ise nodes that have the policy service role enabled, will be used to forward requests using the external radius proxy feature.

WLC WLAN Authentication from External RADIUS Server

Dears,
How to make WLC Receive PoD (Packet of Disconnect) from the RADIUS server to terminate the session and disconnect authenticating clients.
Thanks,

Hi Ahmed,
Its not documented well, but here is it:
CSCso52532 No Documentation for sending RADIUS Disconnect-Request (RFC 3576)
. If a user has to be logged out then, following attributes are expected
- SSH_RADIUS_AVP_SERVICE_TYPE(6) attribte with following value.
         SSH_RADIUS_SERVICE_TYPE_LOGIN(1)
       - SSH_RADIUS_AVP_CALLING_STATION_ID(31) - this is needed, if
              we want to delete particular user session via particular device
              (like PDA, Phone or PC)
       - SSH_RADIUS_AVP_USER_NAME(1)
. If a management user has to be logged out then, following attributes
are expected
- SSH_RADIUS_AVP_SERVICE_TYPE(6) attribte with following value
- SSH_RADIUS_SERVICE_TYPE_ADMINISTRATIVE
                      OR
   - SSH_RADIUS_SERVICE_TYPE_NAS_PROMPT
   - SSH_RADIUS_AVP_USER_NAME(1)
   - SSH_RADIUS_AVP_FRAMED_IP_ADDRESS(8)
Eg:
*Dec 17 12:59:08.926:   Packet contains 14 AVPs:
*Dec 17 12:59:08.926:       AVP[01] User-Name................................user@domain (17 bytes)
*Dec 17 12:59:08.926:       AVP[02] Nas-Port.................................0x0000000d (13) (4 bytes)
*Dec 17 12:59:08.926:       AVP[03] Nas-Ip-Address...........................0x0a0047fb (167790587) (4 bytes)
*Dec 17 12:59:08.926:       AVP[04] Framed-IP-Address........................0x0a003f1b (167788315) (4 bytes)
*Dec 17 12:59:08.926:       AVP[05] NAS-Identifier...........................wlcRM_1 (7 bytes)
*Dec 17 12:59:08.926:       AVP[06] Airespace / WLAN-Identifier..............0x00000004 (4) (4 bytes)
*Dec 17 12:59:08.926:       AVP[07] Acct-Session-Id..........................4b2a1d0c/00:1c:26:cb:27:71/4 (28 bytes)
*Dec 17 12:59:08.926:       AVP[08] Acct-Authentic...........................0x00000001 (1) (4 bytes)
*Dec 17 12:59:08.926:       AVP[09] Tunnel-Type..............................0x0000000d (13) (4 bytes)
*Dec 17 12:59:08.926:       AVP[10] Tunnel-Medium-Type.......................0x00000006 (6) (4 bytes)
*Dec 17 12:59:08.926:       AVP[11] Tunnel-Group-Id..........................0x3633 (13875) (2 bytes)
*Dec 17 12:59:08.926:       AVP[12] Acct-Status-Type.........................0x00000001 (1) (4 bytes)
*Dec 17 12:59:08.926:       AVP[13] Calling-Station-Id.......................10.0.63.27 (10 bytes)
*Dec 17 12:59:08.926:       AVP[14] Called-Station-Id........................10.0.71.251 (11 bytes)
*Dec 17 12:59:10.943: 00:1c:26:cb:27:71 Accounting-Response received from RADIUS server 10.0.71.249 for mobile 00:1c:26:cb:27:71 receiveId = 0
*Dec 17 12:59:34.044: Received a 'RFC-3576 Disconnect-Request' from 10.0.71.249
*Dec 17 12:59:34.044:   Packet contains 6 AVPs:
*Dec 17 12:59:34.044:       AVP[01] Nas-Ip-Address...........................0x0a0047fb (167790587) (4 bytes)
*Dec 17 12:59:34.044:       AVP[02] User-Name................................user@domain (17 bytes)
*Dec 17 12:59:34.044:       AVP[03] Acct-Session-Id..........................4b2a1d0c/00:1c:26:cb:27:71/4 (28 bytes)
*Dec 17 12:59:34.044:       AVP[04] Calling-Station-Id.......................10.0.63.27 (10 bytes)
*Dec 17 12:59:34.044:       AVP[05] Called-Station-Id........................10.0.71.251 (11 bytes)
*Dec 17 12:59:34.044:       AVP[06] Service-Type.............................0x00000001 (1) (4 bytes)
*Dec 17 12:59:34.044: Error cause 503 generated for 'RFC-3576 Disconnect-Request' from 10.0.71.249 (Session Identification attributes not valid)
*Dec 17 12:59:34.045: Sent a 'RFC-3576 Disconnect-Nak' to 10.0.71.249:3799
*Dec 17 12:59:36.561: ****Enter processIncomingMessages: response code=5
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed

Cisco AAA authentication with windows radius server

Cisco - Windows Radius problems
I need to created a limited access group through radius that I can have new network analysts log into
and not be able to commit changes or get into global config.
Here are my current radius settings
aaa new-model
aaa group server radius IAS
server name something.corp
aaa authentication login USERS local group IAS
aaa authorization exec USERS local group IAS
radius server something.corp
address ipv4 1.1.1.1 auth-port 1812 acct-port 1813
key mypassword
line vty 0 4
access-class 1 in
exec-timeout 0 0
authorization exec USERS
logging synchronous
login authentication USERS
transport input ssh
When I log in to the switch, the radius server is passing the corrrect attriubute
***Jan 21 13:59:51.897: RADIUS:   Cisco AVpair       [1]   18 "shell:priv-lvl=7"
The switch is accepting it and putting you in the correct priv level.
***Radius-Test#sh priv
   Current privilege level is 7
I am not sure why it logs you in with the prompt for privileged EXEC mode when
you are in priv level 7. This shows that even though it looks like your in priv exec
mode, you are not.
***Radius-Test#sh run
                ^
   % Invalid input detected at '^' marker.
   Radius-Test#
Now this is where I am very lost.
I am in priv level 7, but as soon as I use the enable command It moves me up to 15, and that gives me access to
global config mode.
***Radius-Test#enable
   Radius-Test#
Debug log -
Jan 21 14:06:28.689: AAA/MEMORY: free_user (0x2B46E268) user='reynni10'
ruser='NULL' port='tty390' rem_addr='10.100.158.83' authen_type=ASCII service=ENABLE priv=15 vrf= (id=0)
Now it doesnt matter that I was given priv level 7 by radius because 'enable' put me into priv 15
***Radius-Test#sh priv
   Current privilege level is 15
   Radius-Test#
I have tried to set
***privilege exec level 15 enable
It works and I am no longer able to use 'enable' when I am at prv level 7, but I also cannot get the commands they will need to work.
Even if I try to do
***privilege exec level 7 show running-config (or other variations)
It will allow you to type sh run without errors, but it doest actually run the command.
What am I doing wrong?
I also want to get PKI working with radius.

I can run a test on my radius system, will report back accordingly, as it's a different server than where I am currently located.
Troubleshooting, have you deleted the certificate/network profile on the devices and started from scratch?

Authentication Policy ISE with External RADIUS Server

Similar Messages

Maybe you are looking for