Authority-Check Object for PLANT(WERKS)?

Hi Experts,
By using "V_VBAK_VKO" Authority Object am checking the user Authentication against the sales area(Sales OrgDistr. ChannelDivision) in my custom report. Below is the code,
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
    ID 'VKORG' FIELD s_vkorg
    ID 'VTWEG' FIELD s_vtweg
    ID 'SPART' FIELD s_spart
    ID 'ACTVT' FIELD '01'
    ID 'ACTVT' FIELD '02'.
(Note: My report is for SD/OTC module)
I also need to check the authenmtication of user against entered PLANT (WERKS) in selection screen, so, pls. let me know that What is the Authority-Check Object for PLANT(WERKS)
Thank you

Hi,
Transaction SU20, search for WERKS.
When you find it, double click on the row, in the bottom half of the resulting screen there is a list of authorisation objects that contain the field.
Unfortunately, you can't navigate from this list into the definition of the objects, so you'll need to cross-reference against transaction SU21.
Regards,
Nick

Similar Messages

Authorisation-object for Plant-WERKS in SD

Hi Experts,
Am working on a report for SD / OTC module.
We have PLANT-WERKS field in the selection screen, so, I have to cross-check user authentication for PLANT-WERKS level, so, when I checked the SU20 and SU21, I saw the below 2 objects,
1) 'M_RECH_WRK' (Invoices: Plant - Materials Management - Invoice Verification class)"
2) 'M_EINF_WRK' (Plant in Purchasing Info Record - Materials Management: Purchasing)
But, seems they are for MM module, pls. let me know Wht is the PLANT-WERKS authentication object for SD / OTC module?
Thank you

I don't think there are any SD based authorization objects exclusively for Plant. Table TOBJ defines auth objects and contains *_WRK entries only for MM, PP and WG modules. Listing all the SD objects in TOBJ, only the V_ECCN auth object includes the Plant in the fields checked, but it also checks another field and I'm not sure where it is checked, so it may or may not be useful to you. You might need to create a custom authorization object.
.. Craig

Authorization object for plant on selection-screen

Hi All,
I need to cehck the authorization object for plant on sleection screen..the palnt is select-options.
I have written the code
Declaration of local constants.
CONSTANTS : lc_i(1) TYPE c VALUE 'I',
              lc_eq(2) TYPE c VALUE 'EQ'.
REFRESH : r_werks.
LOOP AT s_werks.
    IF s_werks-low IS NOT INITIAL.
      AUTHORITY-CHECK OBJECT 'M_MATE_WRK'                "Check if the user has autorization for the plant.
                           ID 'ACTVT' FIELD '03'
                           ID 'WERKS' FIELD s_werks-low.
      IF sy-subrc NE 0.
        r_werks-sign   = lc_i.
        r_werks-option = lc_eq.
        r_werks-low    = s_werks-low.
        APPEND r_werks.
      ENDIF.
    ENDIF.
ENDLOOP.
LOOP AT s_werks.
    IF s_werks-high IS NOT INITIAL.
      AUTHORITY-CHECK OBJECT 'M_MATE_WRK'                "Check if the user has autorization for the plant.
                           ID 'ACTVT' FIELD '03'
                           ID 'WERKS' FIELD s_werks-high.
      IF sy-subrc NE 0.
        r_werks-sign   = lc_i.
        r_werks-option = lc_eq.
        r_werks-low    = s_werks-high.
        APPEND r_werks.
      ENDIF.
    ENDIF.
ENDLOOP.
My doubt is will the authorization will check the plants in between 1001 and 2001..suppose i have pplants 1001,1002,1003,1004,2001..Now will the above code will check for all the plants or only 1001 and 2001 if i specify in the select-options.
Regards,
raj

Hi Raj
First no need to LOOP AT s_werks and check s_werks-high as it will always be present only once in the table s_werks.
Do this
SELECT werks FROM t001w INTO li_werks
WHERE werks IN s_werks.
LOOP AT li_werks.
*check your authority thing here and fill the range
ENDLOOP.
Pushpraj

Authority Check Object

Hello Freinds,
If there is a field from custamize table for exa.(Zmara-werks )then can we use standard authority check object? or should we create custamize authority object.
Please guide me...........
Thanks,
Amar

Hi ,
To Find Authorization Object for a particular field, use TCode SU21. Click on Find button and enter the filed name to know the Authorization Object.
If suitable combination of required fields is not found in Authorization objects, new objects need to be created. Use TCode SU21 to create new authorization objects. Click on Create Button and enter new object class name and press save button.

Plz tell me how to create authority check objects and how to usein prg

dear sir,
plz tell me how to create authority check objects and how to usein prg

http://help.sap.com/saphelp_46c/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.ht
Create custom authorization Customer specific object
If you have requirements that cannot be met using the P_ORGIN and P_ORGXX authorization objects (for example, because you want to build your authorization checks on additional fields of the Organizational Assignment infotype (0001) that are customer-specific), you can include an authorization object in the authorization checks yourself.
Create the authorization object using transaction SU21. Make sure you keep to the customer name range (Z/Y). To be able to use the new authorization object you have created in the master data authorization check, the object must contain the INFTY, SUBTY, and AUTHC fields. You can use any of the fields of the Organizational Assignment infotype (0001) for the other fields. You can also use customer-specific additional fields provided they are CHAR or NUMC type fields.
After you have created the object, you must start the RPUACG00 report. This report overwrites the MPPAUTZZ standard include with the code that is needed to evaluate the authorization object you created. Note: Technically speaking, this involves a modification. However, SAP fully supports this procedure. And you should not have more maintenance work as a result of this modification.
          Note: that if you use customer-specific authorization objects, you must maintain these objects in transaction SU24 (Maintain Assignment of Authorization Objects to Transactions) in the same way as you maintain the authorization objects P_ORGIN, P_ORGXX, and P_PERNR
AUTHORITY CHECK OBJECT Object_name
            ID fieldname1 FIELD fieldvalue1
            ID fieldname2 FIELD fieldvalue2
            ID fieldname3 FIELD fieldvalue3.
             If sy-subrc eq 0.   "Authorization exists
             Endif.
http://articles.techrepublic.com.com/5100-6329_11-5110893.html
Edited by: JackandJay on Jan 16, 2008 10:21 AM

How to create Authority check object

Hello Gurus,
How to create Authority-check object 'ZABC'
                                                         ID 'TABLE' FIELD 'ZTABLE'.
Please tell me detailed procedure.
Thanks in advance.
Best Regards,
zubera

Dear Zubera,
Creating Authorization Fields
In authorization objects, authorization fields represent the values to be tested during authorization checks.
To create authorization fields, choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects ® Fields.
To create a authorization field:
1. Choose Create authorization field.
2. On the next screen, enter the name of the field. Field names    must be unique and must begin with the letter Y or Z.
3. Assign a data element from the ABAP Dictionary to the field.
4. If desired, enter a check table for the possible entries. For    more information about check tables.
For more information about AUTHORITY-CHECK, see the keyword documentation of the ABAP Editor.
You can often use the fields defined by SAP in your own authorization objects. If you create a new authorization object, you do not need to define your own fields. For example, you can use the SAP field ACTVT in your own authorization objects to represent a wide variety of actions in the system.
Assigning an Authorization Object to an Object Class
Each authorization object must be assigned to an object class when it is created.
Choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects --> Objects.
You can also create authorization objects in the Object Navigator (SE80).
Creating / Choosing Object Classes
The system displays a list of existing object classes.
Object classes are organized according to the components of the system.
Before you can create a new object, you must define the object class for the component in which you are working. The objects are not overwritten when you install new releases.
You can also define your own object classes. If you do so, select class names that begin with Y or Z to avoid conflicts with SAP names.
Creating an Object
Enter a unique object name and the fields that belong to the object. Object names must begin with the letter Y or Z in accordance with the naming convention for customer-specific objects.
You can enter up to ten authorization fields in an object definition. You must also enter a description of the object and create documentation for it.
Ensure that the object definition matches the AUTHORITY-CHECK calls that refer to the object.
Do not change or delete authorization objects defined by SAP. This disables SAP programs that use the objects.
You can regenerate the profile SAP_ALL after creating an authorization object.
Best Regards,
Rajesh
Please reward points if found helpful.

About authority-check object 'M_MATE_WGR'

hi all
I have a problem about authority-check object 'M_MATE_WGR'. the detail is bleow:
Read table T023 where the material group is in select option s_matkl. Then loop at the results and check for every found material group. If the user is authorized to use it with the ABAP statement AUTHORITY-CHECK with object M_MATE_WGR with parameters ACTVT = 03 (display) and BEGRU = the material group. When the user is allowed to use it, store it in an internal table and continue with the remaining materials groups from T023. When the user is not allowed to use it, set the status flag to X and dont save the current material group in the internal table.
After all checks have been done, empty the select option s_matkl. Loop over the internal table with the allowed material groups and fill up the select option s_matkl again with these records.
Thank you in advance .
Nick

You are on the right track. Authorization object M_MATE_WGR checks the Authorization Group (BEGRU) not the Material Group. You read table T023 with the Material Group to get the Authorization Group.
Step 1: Read table T023 where MATKL = the Material Group you want to check authorization.
Step 2: Retreive the value in field BEGRU from the record in table T023. Use the value in T023-BEGRU to pass to the AUTHORITY-CHECK object M_MATE_WGR.
Hope that helps.

Securing action box items with authority-check object

In a 4.6c environment I have setup action box items for various sm and QM notifications.
I would like to secure some of the action box items that their execution is only allowed by authorized personnel using authority-check objects.
Is there a way to secure the action box item by the item number? If not the action box items are using a function module. Maybe I could use the fm name in the authority-check.
Any ideas would be greatly appreciated.

Hi,
just see these examples
SAPTLIST_TREE_CONTROL_DEMO_HDR
SAPTLIST_TREE_CONTROL_DEMO
SAPTLIST_TREE_MODEL_DEMO
and for getting a checkbox we have to repalce the icon what is there in the example program and handle the checked and unchecked event for the checkbox.
this can be achieved by using object oriented methods...
reward if helpful
rgds,
Prajith
Prajith

Reg:Authority Check object

Dear All,
I am calling two authority check object M_MATE_MAR and M_MSEG_BMB in my report.
Now for a user if i see the Role the second object M_MSEG_BMB is maintained and the object M_MATE_MAR is not maintained.
Now in my program for the object M_MATE_MAR(as it is not maintained),my sy-subrc is returning 12,hence check faing and for
M_MSEG_BMB sy-subrc = 4 as check is failng.
My requirement is the user should not see some movement types irrespective of the material ,
If i pass a material in the selection screen report , movement type records are deleting fine along with that others are alos deleting becs of sy-subrc <> 0(sy-subrc = 12).so i get a blank report as output.
so wht should be done in my case.
Regards

Hi Rajendra,
When you hit F1 on the Authority-check,
If Sy-subrc = 4, Authorization check not successful. One or several authorizations were indeed found for the authorization object in the user master record and they include the value sets, but not the values specified, or incorrect or too many authorization fields were specified.
If Sy-subrc = 12, No authorization was found for the authorization object in the user master record.
When Sy-subrc = 24, Incorrect authorization fields or an incorrect number of authorization fields was found. This return value is no longer set since Release 6.20. Up to Release 4.6 it is set only if the profile parameter "auth/new_buffering" has a value less than 3.
When sy-subrc = 40, An invalid user ID has been entered in user.
Hope it helps.
Sujay

Authority-Check Object Help

We consolidated R3 financial data to an SEM system. The authority-check object does not exists in SEM, thus the user can never perform those things unless I comment it out, or find one that works. The code is below.
Any suggestions?
Thank-You.
" Check security to determine if this user has unlock permission
AUTHORITY-CHECK OBJECT 'E_CS_PERMO'
   ID 'PERMO' FIELD '1'   "Open period
   ID 'DIMEN' FIELD g_dimen
   ID 'RVERS' FIELD g_rvers
   ID 'BUNIT' DUMMY
   ID 'CONGR' FIELD g_congr.

If auth object check is really required, i suggest to check with functional team for equivalent auth object.
Thanks,
SKJ

Regarding Authority check objects

Hi All,
I have some confusion on Authority-check and its working.
AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
ID 'ACTVT' FIELD '03'
ID 'DICBERCLS' FIELD tddat-cclass.
In the above code, 'DICBERCLS' FIELD tddat-cclass... these values will take and compare with tddat table list.
but my question is how it will check the ID 'ACTVT' FIELD '03' ??How it will check for the ACTVT is '03'.
It will take it from any table?
Thanks in advance,
Madhu

Hi,
You are coding as follows:-
AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
ID 'ACTVT' FIELD '03'
ID 'DICBERCLS' FIELD tddat-cclass
This authorisation object is for Table Maintenance (via standard tools such as SM30).
Now when the code is executed, SAP will check that whether the current user has an Authorization Group as the value in TDDAT-CLASS in the user role and the activity is 03 or display.
If in the user role, the basis guys have given the Authorization Group(DICBERCLS) value as XYZ and the value in tddat-cclass is also 'XYZ' and the value of ACTVT field in the user role is '03', SAP will allow the user only to display the table via SM30.
If the authorisation group is different or if the ACTVT is different, the user will not be allowed for this authority check.
I hope this is clear for you.
Regards,
Ankur Parab

Authority-Check object 'Z99_ARB ' id 'Z99_ARBMGR' field 'Y'.

Hi
I'd appreciate a STEP-BY-STEP on how to create my own authority-check objects.
The help I have is not comprehensive - it only refered me to SU20 and SU21.
Thank you

Moving on; there are hundreds of scenarios, but this is the simple step-by-step I was looking for:
Step 1:
SU20 - List of Authorization Fields
--> Create a new authorization field e.g. Z_FIELD and assign either SAP standard or custom Data Element and a Package
Step 2:
SU21 - List of Object Classes
--> Forward Navigate into the application area of choice e.g. HR
> Create your Z object e.g. Z_OBJEC
> Add Z_FIELD as an authorization field
Step 3:
Set up the user list that should have the authorization added to their profile and fwd to your Security Consultant
Step 4:
Within ABAP editor use the Pattern to select your new Z_OBJEC
and assign a required field value for the id (object-field) e.g.
authority-check object 'Z_OBJEC'
id 'Z_FIELD'
field 'X'.
Edited by: Adrian Bruwer on Mar 9, 2010 7:36 PM

How to create authority check object and assign to ztcode which is of modu

Dear ,
how to create authority check object and assign to ztcode which is of custom module pool program.its urgent kindly help points rewarded.

Manoj,
You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
K.Kiran.

Tcode for see AUTHORITY-CHECK asignement for User ?

Hi everybody
1. Does somebody knows a TCode for see an Authorization Object directly, that is i know to see them using SU21, then selecting an Authorization Class and then i see the corresponding Auth.Objetcs. But, is there a Tcode for see the Auth.Objects without see first the Auth.Classes ?
2, Is there a Tcode for see the Auth.Objects and values assigned for a user , that is, a Tcode for evaluate if an AUTHORITY-CHECK is going to be passed by an specific user-object-activity ?
For example, i have the Auth.Object 'M_MATE_WRK' wich uses the Plant (WERKS) object. Is there a Tcode wich allow me to know if a user has asigned this Auth.Object for specified Plant (WERKS) Value, and wich activities does the user has permited ?
Thanks..
Frank

Hello Frank
Call transaction <b>SUIM</b> (User Information System) and check the available reports there. I am sure you will find a report fulfilling your requirement.
Regards
Uwe

How to find out Authorization Object for Plant

Hi,
I have to implement an Authorization check for Plant in My Report Program.
Is there any transaction which can help me to find out Authorization Object for any field like Material and plant?
Thanks,
Mamta

Using SU21 u can create Authorisation Object.
The ABAP command AUTHORITY-CHECK is used for performing authorizaton checks in programs.
check f1 help on AUTHORITY-CHECK for the syntax.
check these links
link:[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c;jsessionid=(J2EE3417500)ID1605942050DB11298929682009193279End]

Authority-Check Object for PLANT(WERKS)?

Similar Messages

Maybe you are looking for