Authorization default values of transaction F-53 for object F_FAGL_LDR
All,
I am getting this error when I go to adjust an existing role
"Authorization default values of transaction F-53 for object F_FAGL_LDR inconsistant"
Can any one help me resolve this issue? I tried to set the check indicator to "NO" but it is still giving me the error at the bottom.
Please assist.
> ... they had me add Profit center to F_FAGL_LDR through SU21 and then I ran into the inconsistant issue.
This part was missing before hand... I can understand that SAP said this is not support, because you have modified as standard object by adding a field to it... that makes it yours now.
Whoever "they" is, they gave you bad advice.
To repair the authorization object preferably do so by transporting it from a system on the same release which still has the standard fields.
Cheers,
Julius
Edited by: Julius Bussche on Aug 15, 2009 3:30 PM
Similar Messages
-
Authorization default values of transaction /MRSS/PLBOMGR for object /MRSS/
Hello,
When I add the tcode "/MRSS/PLBOORGM " throuh the menu tab and when I go the authrization tab and click on either
Change Authorization Data or Expert Mode for Profile Generation the is an error message stating the following :
======================================================================================
Authorization default values of transaction /MRSS/PLBOORGM for object /MRSS/PB1 inconsistent
Message no. 5@015
Diagnosis
The authorization fields contained in the authorization defaults are incomplete or incorrect.
System Response
The process had to be terminated to avoid generating inconsistent authorization data.
Procedure
Use transaction SU24 to adjust the authorization defaults to the object definitions in transaction SU21 and then repeat the process.
============================================================================================
SU24, the custom values maintained are same as SAP Default . Any suggestion?
Thanks
Osama KhalifaThis indicates one of two things resulting from changes to the authorization object AFTER SU22 had been maintained for it:
1) One or more of the fields were converted to org. levels using the "old" technique of maintaining the table instead of running the report for this.
2) One of more of the fields were changed in SU20 or SU21 but the original data in SU22 was not corrected.
Solution in both cases is to correct the proposals in SU24 (customer data) and report it to SAP to correct in SU22 (original SAP data).
Cheers,
Julius -
Authorization Default values .....
In PFCG I am maintaing a role --when i click on the ' Change authorization Data " the message I get is
"Authorization default values of transaction sm36 for object S_BTCH_JOB inconsistent"
Background:
I am maintianing the roles during the upgrade -to ECC6. Idid two stand alone (meaning no transports ) upgrades and i didnot get this error at all --any inputs ??> But my problem is this Do i need to do the " step1 of su25?" meaning intial fill of Customer tables ?? I thought this is done only when PFCG is used first.
That should be done after every upgrade. Your biggest challenge is to safeguard your changes to the customer tables USOBT_C and USOBX_C before overwriting the tables and restoring everything you've done afterwards.
I'll look into this tomorrow (no system at hands now).
If you've never changed any settings you can safely re-load the customer tables.
Jurjen
P.S. I won't yell. SU24 settings are often considered as customizing. Just find out in which client those are done.
Edited by: Jurjen Heeck on Oct 1, 2008 6:57 PM
P.P.S. Come to think of it, these tables are cross client, you need a workbench transport for changes. So a 'golden client' is kind of irrelevant here...
Edited by: Jurjen Heeck on Oct 1, 2008 7:29 PM -
How to add a default value in a site column for every item in a document library
HI
i created a content type with some site columns ,
and included in a Document library.
Process ( content type)
-ProcessNo
-ProcessName
after that i uploaded 100 Documents but not added value in a site column process name.
now how i add a default value in a site column for every document in a document library
adilHI
i get below error when i change the script
PS C:\scripts> C:\Scripts\updatedefaultvalue.ps1
Cannot index into a null array.
At C:\Scripts\updatedefaultvalue.ps1:8 char:7
+ IF($i[ <<<< "Title"] -eq $null)
+ CategoryInfo : InvalidOperation: (Title:String) [], RuntimeExce
ption
+ FullyQualifiedErrorId : NullArray
$web = Get-SPWeb http://tspmcwfe:89/
$list = $web.Lists["test"]
$item = $list.Items | Where { $_["Name"] -eq "Emc" }
foreach($i in $items)
IF($i["Title"] -eq $null)
$i["Title"] = "test"
$i.Update()
adil
Why are you piping a where in the items? Do you only want to add the "test" to ones matching
a name?
If you have ISE installed on your server I recommend you put your code in there and debug it.
If this is helpful please mark it so. Also if this solved your problem mark as answer. -
Default value don't get displayed for Fetch XML report
Hi All;
i have a date parameter in a fetch XML report
i set its default value as 01/01/2010
when i run this report in SSRS i can see the default value of the date
But when the same report gets displayed on CRM 2013 online - report section the date default value dont get displayed
Any help for this much appreciated
Thanks
Pradnya07Hello Zero-G. _,
>> But I don't get any "Operation". I can't see my failure. - I tested around for the last few days, but I don't have a Clou, what's wrong...
I am afraid that you have mixed the WCF and WCF Data Service, here is a WCF Service example(it works with the Entity Framework while it is not WCF Data Service):
http://www.codeproject.com/Articles/127395/Implementing-a-WCF-Service-with-Entity-Framework, please check it, in your case, you are use this mode and you do not need to create WCF Data Services.
If you want to write a custom method in WCF Data Service, you could refer to this link:
https://msdn.microsoft.com/en-us/library/dd744841(v=vs.110).aspx, as you can see, although if we declare a custom method, it would not show in the web browser, we call it as adding
the method after the based service link directly:
http://localhost:12345/Northwind.svc/GetOrdersByCity
Or call it by using a client project which could detect this method and call it as in this blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/12/01/way-to-expose-custom-method-in-an-entity-class-from-wcf-data-service.aspx
Regards,
Fred.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Setting default value read from user session, for an LOV in Query component
I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
Can any one let me know how to go about with this?I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
SQL> var run_type varchar2(1)
SQL> exec :run_type := 'A'
PL/SQL procedure successfully completed.
SQL> create table my_cycles as select level cycle_id
2 , level cycle_status
3 from dual connect by level <= 5;
Table created.
SQL> select cycle_id
2 from my_cycles
3 where case
4 when :run_type = 'D' and cycle_status = 1 then 1
5 when :run_type != 'D' and cycle_status in ( 2, 3 ) then 1
6 end = 1;
CYCLE_ID
2
3
2 rows selected.
SQL> exec :run_type := 'D';
PL/SQL procedure successfully completed.
SQL> /
CYCLE_ID
1
1 row selected.
SQL> -
Storage Condition - how to make a default value in creating a material for
When creating a material, where can I make shure that a default storage condition (MARA-RAUBE) is filled in for a specific material type?
Solution: When creating a material, you have to input a material group. I have noticed that a material group has a link with a reference material. (tx: WG22) And in the reference material the storage condition is filled. When changing the reference article this will now also be taken by the material group. So if you fill in a specific material group for your to be created material, the wanted field is filled in.
Edited by: O. Ozpinar on Mar 24, 2009 11:12 AM -
MIRO - default value for currency parameter (waers)
Hi everyone,
I need to establish 'EUR' as a default value in transaction MIRO. I've tried already changing the value in SU02 but it doesn't work. I've tried the badi MRM_HEADER_DEFAULT but asks for a password when I try to modify it so that's out too.
Is there any way I can establish 'EUR' as default currency? any leads will be appreciated, thank you very much in advance.
Zigor.hi,
try user exits..
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regards, -
XK01 - Company ID for trading partner - default value
Hi gurus,
I would really appreciate your help on this one:
I need to insert a default value in the "company ID for trading partner" field when creating a vendor(or customer).
The value must be inserted when using transaction XK01 either manually or via batch input. The automated integration process is the following:
my external data -> prgm RFBIKR00 -> batch input run for XK01
basically my ext data may have a company ID in which case I want to keep it.. otherwise, I want to insert a default value.
Has anyone ever face a similar need and found a great solution?
Here are some solutions I thought about:
- user exit SAPMF02K. Unfortunately, we cannot change the value of the field VBUND
- variant transaction. But it seems to not to be compatible with batch input mode
- workflow triggered by the vendor creation event that could modify the VBUND data.
(this one should work... but I am a bit reluctant to implement such a tools for such a simple need)
- copying RFBIKR00 into a specific developpment... not great as well.
- BTE 1421 or 1420 do not seem to be able to update this field either.
any suggestion?
Thanks in advance
regards,
Damien.Hi Rajesh,
thank you for your answer. I am not familiar with field exits and had not thought about it.
I found this link on the forum : http://www.sapdevelopment.co.uk/enhance/fexits.htm that gave me additionnal info on field exits.
I will have a look on monday to see if it solves my issue, but it seems to be a very suitable solution.
I'll reward your answer as soon as I know wether it solved my problem or was only helpful :).
Thanks a lot.
Regards,
Damien. -
Setting Default values for field using custom.pll
Hi All,
I have an rquirement to set the default values on Meterial Tranasction screen for some condition
I tried it in both ways via Form Personalization and using custom.pll
i m using the following code in custom.pll
form_name varchar2(30):= name_in('system.current_form');
block_name varchar2(30):= name_in('system.cursor_block');
trx_type varchar2(30);
subinv varchar2(30);
begin
if form_name='WIPTXMAT' and block_name ='MTL_TRX_LINE' then
if event_name ='WHEN-VALIDATE-RECORD' then
trx_type:=name_in('WIPTXMAT.TRANSACTION_TYPE');
if trx_type ='WIP Return' THEN
copy(10,'MTL_TRX_LINE.TRANSACTION_QUANTITY');
copy(10,'MTL_TRX_LINE.NUMBER_OF_LOTS_ENTERED');
sinv:=trim(name_in('MTL_TRX_LINE.SUBINVENTORY_CODE'));
if sinv is null then
copy(subinv,'MTL_TRX_LINE.SUBINVENTORY_CODE');
copy(fr_locator,'MTL_TRX_LINE.LOCATOR');
FND_MESSAGE.SET_STRING(sinv);
FND_MESSAGE.SHOW;
end if;
end if;
end if;
end if;
end event;
Problem is that default values are getting set but not for all rows . if there are 4 records then values are set for only first 2 rows and if there are 2 rows then defaults are set for 1st row only.
Same behaviour happens when i do it via form personalization
i couldn't understand the behaviour of WHILE-VALIDATE-RECORD event..
Please provide some suggestion on it. its really urgent.
Thanks in Advance
RenuWorks Now...
-
Default values for static report parameters are not visible when scheduling
Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AMHi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick -
Modify default value for static parameter field programmatically
Hi,
I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
I was even able to modify the default values for the parameters, which are used for scheduling of each report.
But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
This is what I have tried so far:
Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
Any help will be appreciated.
It would be great to know if someone of you has already implemented successfully such a use-case.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PMHi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan -
Pl/sql expression for default value
I'm trying to run this simple script as a default value using pl/sql expression, but I keep getting this error. THe select statement itself works fine as a sql statement source value, but will not work as a pl/sql exression as a default value. This (:P33_SYSUSERID_CREATED_BY ) is the field name on the form. Any ideas?
begin
select a.id || ', ' || A.NAME_LAST into :P33_SYSUSERID_CREATED_BY from S_USERSV a where a.name_last = 'HAMMAKER';
end;
Error ERR-9132 Error in PLSQL expression for item default code, item=P33_SYSUSERID_CREATED_BY
OK
ORA-06550: line 1, column 27: PLS-00103: Encountered the symbol "BEGIN" when expecting one of the following: ( - + case mod new not null avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date pipeSudha,
For a default value type of PL/SQL Expression, you could create a function that accepts an input and returns a value. If the function (not a procedure) is named GET_REFNO, you would call it using an expression in the default value field like:
get_refno(:P3_REFTYPE)
For a default value type of PL/SQL Function Body, you could call your existing procedure with a default value like:declare
l_value varchar2(32767);
begin
get_refno(:P3_REFTYPE, l_value);
return l_value;
end;Scott -
Default value for date parameters
Hi,
There are several reports that have from_date/to_date parameters where the default value is, e.g. 01/01/2012 and 31/12/2012.
Every year, after the previous year is closed, I go through the process of having to change the default values to the new year in all the reports. I have checked but not found an option of using a formula for a default value in a parameter. Could there have been something new recently that I missed?
Or does anyone have a suggestion of a way to get around it? I have tried in the past trying to extract the year from sysdate, but have not succeeded in getting a formula that the Discoverer accepts in the default value.
Thanks.
LeahThanks for the information. I doubt that my boss would go for it but I will speak to him when I am at work next week. We have some old reports which have a default value of null and that would most probably be confusing for many of the users. Is there a way to have the default the end of the year also?
Once again, thank you.
Leah -
Revision: 7553
Author: [email protected]
Date: 2009-06-04 09:32:51 -0700 (Thu, 04 Jun 2009)
Log Message:
Fix the default value of the "required" attribute for asdoc.
Bugs: SDK-21488
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21488
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java${ui:cond( uix.current.isNewRow, 'true', ui:cond( bindings.AddProjectNutsoverleg.value == 1, 'true', 'false' ) ) } notice the '.value' it could also be '.inputValue'.
If not there is also an option to make sure that when the checkbox is empty a value is returned anyways this work like this:
protected void processUpdateModel( DataActionContext ctx )
//First look for the request parameter
Object cbInRequest = ctx.getHttpServletRequest().getParameter( "nameofthecheckbox" );
//We only need to do anything if it was not submitted
if( cbInRequest == null )
// Get hold of the Form Bean containing the record
BindingContainerActionForm updateForm = (BindingContainerActionForm) ctx.getActionForm();
//Get the binding for our particular column
JUCtrlAttrsBinding checkBoxBinding = (JUCtrlAttrsBinding)updateForm.get( "nameofthecheckbox" );
//Reset that explicitly to the *unchecked* value
checkBoxBinding.setAttribute( 0, new oracle.jbo.domain.Number( 0 ) );
super.processUpdateModel( ctx );
}Maybe this helps.
Maybe you are looking for
-
How to receive email in SAP SBWP or SO01 ?
Hi, I have no problem to configure SAP to send mail out. Now want to configure it to receive mail in SAP Inbox (SBWP/SO01) but not successful. Found the thread Receiving e-mails in SAP (from Exchange 2000) but information is limited. My system info a
-
I have a non-Intel MacMini with Leopard installed. It does not have an AirPort card installed, but I have an AirLink 101 USB adapter (AWLL3028) that I would like to use with it. Does anyone know of third party drivers developed for this card? There a
-
Installment plan - Plans are scheduled and not paid , extend to other cust.
Hi Masters, Please clarify and suggest on Installment plan. We have query in Auto industry , where the customer buys the vehicle on installment basis ,and the installment plan is for 2 years . The customer pays regularly for 1 year and after an year
-
Passing multiple parameters into Custom Folder...
Hi, We have created a Package as per Metalink Note:304192 to pass parameters to the Custom folder in Disc admin. It is working for some simple sql custom folders. But not for the Custom folder which has some subqueries and inline views. Ex: This is m
-
SRM Local Purchase Order with both a standard line item and limit item...
In SRM is it standard that you can create a local purchase order from the sourcing cockpit that contains a mix of limit items and standard items? I know this can be done in R/3.