Auto Keyframing Happens When Function Is Not Checked

Having some trouble with keyframes popping up with every move. The auto keyfame button is not checked. From what I can find that is the only thing that controls that function. I've restarted my project. Started a new one. Reset adobe. Nothing I do is making this function go away. I can't seem to figure out what I could have done that is causing it but it's making it hard to get things done. Is there some other setting I'm not aware of?

Your After Effects Preferences file may be bad. You may have to restore the defaults.
Here's how to do it: you will find the information near the top of the page.

Similar Messages

Hello guy i have problem with my code that it shows that "Datatable name tblCustomer already belongs to this Dataset" Notes : it happen when i uncheck and check my checkbox again

string sProduct = "SELECT * FROM tbl_Product";
string sCustomer = "SELECT * FROM tbl_CustomerInfo WHERE type = 'vip'";
try
if (cbvipcus.Checked == true)
dtVipCustomer = FillComboBoxDataSource(cbcusname, sCustomer, "cus_id", "cus_name");
dtVipCustomer.TableName = "tblCustomer";
ds.Tables.Add(dtVipCustomer);
dtVipProduct = FillComboBoxDataSource(cbproname, sProduct, "pro_id", "pro_name");
dtVipProduct.TableName = "tblProduct";
ds.Tables.Add(dtVipProduct);

Since you are appearantly reusing the same DataSet, you should clear it before adding the new DataTables. If you do this before the if-case you can make sure that they are always removed:
if (ds != null && ds.Tables != null && ds.Tables.Count > 0)
foreach (DataTable dt in ds.Tables)
ds.Tables.Remove(dt);
if (cbvipcus.Checked == true)
dtVipCustomer = FillComboBoxDataSource(cbcusname, sCustomer, "cus_id", "cus_name");
dtVipCustomer.TableName = "tblCustomer";
ds.Tables.Add(dtVipCustomer);
dtVipProduct = FillComboBoxDataSource(cbproname, sProduct, "pro_id", "pro_name");
dtVipProduct.TableName = "tblProduct";
ds.Tables.Add(dtVipProduct);
else if(cbvipcus.Checked == false)
ds.Clear();
cbcusname.DataSource = null;
cbproname.DataSource = null;
ClearTextBox(this.Controls);
If this doesn't work you will have to tell us on what line the exception occurs and how the FillComboBoxDataSource method is implemented.
Please remember to mark helpful posts as answer and/or helpful.

What is happening when firefox reports (Not Responding)?

More often than I'd like (at least a dozen times per day) Firefox goes non-responsive and reports (Not Responding) in the banner. (In fact it happened while I was trying to access this page!)
Does mozilla have any tools/add-ons that I could install that Firefox could activate when this happens to try to diagnose the problem? i.e. when the banner is updated to display (Not Responding), could firefox also do things like:
- ICMP ping the proxy server (if there is one) to see if it is a local network problem.
- ICMP ping the destination website in question to check end-to-end network latency.
- setup an HTTP connection (wget?) to the proxy server (if there is one) to see if the proxy server is the bottleneck?
- setup an HHTP connection(wget?) to the destination website to measure the response time for a new connection?
Etc.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
There is also security software (firewalls) that can cause such issues, so you may need to look there as well.

Shares auto connect even when password is not saved in Keychain

I have shares setup on on a 10.5.6 server and I can connect without issue.
When I disconnect then reconnect, it automatically logs in even though I
did not save the password in the Keychain.
Restarting the Mac clears this and requires me to type in the password again.
Anyone know how to prevent this? I don't want to login to a user's computer
with my admin credentials leaving them with the ability to automatically
log back in without knowing the password.

Changed AFP settings from "Any" to "Standard" DOH!

Why does Iphone sync the photo library folder when it is not checked in itunes.

Hi,
I have any iPhone 4 running 4.3.3. iOS. I recently synced photos in iphoto 6 and selected the folders i wanted I wanted to sync in iTunes. after the sync, the folders that i wanted to sync are there, but also the photo library folder is there. I wish to not have the photo library folder there since it is just a duplication of what is in the other folders that i have asked iTunes to sync. Any Suggestions???

Well, actually it is not a duplication. The Photos app stores photos the same way that iPhoto does. All photos synced to your phone are stored in the "Photo Library". The photos you see in the various albums/folders are really pointers to the actual photos which are in your photo library. They are not duplicates, and no you cannot get rid of the Photo Library.

What happens when I can not buy OS X 10.8 Mountain Lion?

Hi,
I tried to buy OS X 10.8 Mountain Lion and it said that my imac is not compatible with the OS X 10.8 Mountain Lion App. What now?
Thanks,
relaxed4102

If your system is not one of the ones listed here:
http://www.apple.com/osx/how-to-upgrade/
then there's nothing you can do to get and install Mountain Lion. If your system is one of those listed, you need to have Mac OS X 10.6.8 or Mac OS X 10.7 to be able to buy and install Mountain Lion. You cannot upgrade from Mac OS X 10.5.2 which is the OS version shown in your profile.
Regards.

How can I keep my images from being deleted when using Image capture. Even when I do not check the box they still get deleted.

This happened after I updated my operating system.

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

I am getting electric current type shocks whilst using my track pad on my macbook pro. This happens when it is both plugged in to charge and also unplugged. I am left with a constant type pain of prickly pins and needles even when I am not using it.

I have recently bought a Macbook pro and have noticed that I am getting an electric current running up my fingers when using the track pad. This happens when it is charging but most worryingly it happens when it is not plugged in. It leaves me with pins and needles type feeling in my hand and arm even when I am not using it. Also when I sit it on my lap I get the same electrical current in my legs and down to my feet.
Surely this cannot be what I should expect with an apple product?, has anyone else experienced this?.
Yesterday I couldn't bare to use it the current was so strong. I went out for the rest of the day and suffered with pins and prickly needles all day.

Two possible courses of action suggest themselves:
(1) Return your computer immediately to point of purchase and/or authorized service provider.
or
(2) Consult with your doctor about your neurological symptoms.

I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted list com.apple..... from systems folder from library- preference- system. Now, when you check the status of Airport hardware it says "Not

I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted plist of com.apple..... from systems folder from library-> preference->system. Now, when you check the status of Airport hardware it says "Not Associated". One more thing that came to my notice is that 'com.apple.internetconfigpriv.plist' this file is missing from system folder. Any help would be appreciated.
Thanks

Thank you for your reply......
I have tried using different OS 10.7, 10.8... further OS doesn't suit my MacBook, so currently I am on 10.6. I did reinstallation twice using 10.6 but the files were not restored.
Yes.. I am talking about internet wireless card.
I don't have back up files for files which i deleted and they are not in trash as well.... the reason I deleted files was from the image attached from OSXdaily.com
I have tried resetting the PRAM, NVRAM, SMC but to no use.
now what do I do.??

The download function is not working....!! When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads...

The download function is not working....!! I don't use any add-ons like idm or dap,etc.... When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads... I am currently using Firefox 7.0.1....... Nothing is being downloaded, and I am forced to use IE8 for everything... I even tried re-installing, but doesn't help... I am using Windows 7

TonyE is correct the plugin version comes with Adobe's Reader X.
The failure in communication is two parted:
1. Reader X is not Acrobat (Mozilla Plugin Checker)
2. Acrobat is not mentioned in the Reader X download Page (Adobe)
therefore confused clients.
For readers '''CAUTION''' check the minimum requirements for Reader X.
Here: [http://www.adobe.com/products/reader/tech-specs.html Adobe's Reader X requirements link]
Do not waste the time to download (80+MB and Site is Slow) if your machine does not have the resources to execute it. ie. '''aging''' Hardware
Unfortunately the Adobe DLM only checks the requirements after it has
downloaded BEFORE the install occurs.
This is '''very expensive''' for both the sender and receiver
It might be why they called it READER X and READER 9 will not sense an update...
Another Software company pushing Hardware antiquity...

Excel Functions Do Not Work When Data Source is BW

Hello,
My platform is, BOBJ BI 4.0. Data source is SAP BW. BW is connected to XCelsius with BEx. My problem is, excel functions do not work when data source is BW. For example, Excel cell A1=quantity1 B1= quantity2 C1= excel function "=A1+B1" When data source is Excel, for example A1=5, B1=9 C1 automatically equals to 14. (There is no problem when data source is Excel) But, in BW, for example when BW set values to A1=5, B1=9, the system does not calculate C1. C1 always equals to initial value, the system does not care any excel calculation when data source is BW. Any guess for my problem? Thank you for your effort.

Hi,
As you are using very simple formula,it will work no matter which source you are consuming.As mentioned,try to place a simple component(Eg:spreadsheet),just to check whether you are getting the right calculated value or not.
As you are using BW as source,the Preview option will not show the runtime data,so you need to publish in Portal to check whether the calculation happened or not.
As far as I know only few fromulas are supported in Xcelsius,but these kind of simple formulas are very much supported.
Rgds,
Murali

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

What happens when HTTPS communication fails during certificate check?

Hello Experts,
I have a scenario where a Bapi functionality(server proxy) is exposed as a webservice .
So scenario will be SOAP -> XI -> Proxy (calls a BAPI)
Here we are going to use HTTPS (SSL).
I would like to know :
What happens when a check for certificate validation fails in XI? It may be due to invalid certificate, expired certificate or a request from unauthorised user-
- Will it be raised as a exception and we need to do some configuration to inform it back to Sender?
- Will the message fail in Moni with red flag ?
- Alerts will be created ?
Please share your experiences and expert sugestions.
Thanks in Advance!!
Regards,
XI Queries.

Hi Abhishek,
Thanks for the reply. I will keep this in mind and design the scenario & error handling accordingly.
Appropriate points awarded
Kind regards,
Xi Queries.

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto Keyframing Happens When Function Is Not Checked

Similar Messages

Maybe you are looking for