Auto move mouse program?
I need to have my cursor move automatically every minute or so, when I am not in front of my mac, so that a remote access program (over https) does not time out on me.
I cannot seem to find an auto move mouse program for the mac on the web.
There are lots for PCs.
Thanks for any help.
Mac
I use a program caled cliclick, which runs in the command shell. I usually put it in my applescripts for specific purposes where I need an actual mouse movement, but if you just need to move a the mouse for a particular program not to time-out, you could make a crontab entry to run cliclick every minute. That might get annoying, though, if you were actually trying to use the computer.
here it is: http://www.bluem.net/en/mac/cliclick/
Similar Messages
-
I try to move a program to the dock, but the symbol gets "glued" to the mouse pointer/cursor and can't be moved. What is wrong?
This splved my question, tank you so much!!!
-
Any way to move the programs?
I recently made a new parition on my T400 and installed W7 RC. Everything is working great, but I'm just wondering if there's anyway to 'move' the programs that came with the original T400, ie Roxio Business edition, Adobe, etc. to this new partition? I'm currently running these programs by making a shortcut from the old partition, which is okay but still a bit uncomfortable. Thanks!
Check in System Preferences > Mission Control > Show Desktop: > Make sure the right column is set to "-" and not secondary mouse button.
-
Vallacher and Novak's Mouse Program
I am a graduate student looking for a mouse program similar to that of Vallacher and Novak's (1997) to use for my dissertation.
Fischer & Krehbiel (2001) mentioned that they used Labview's software for this. From their paper, it says:
"The circumplex was incorporated into a LabVIEW virtual instrument (National Instruments, Austin, TX). The instrument superimposed a little red X on an image of the circumplex, and the X could be positioned by means of the mouse pointer. The instrument recorded the position of the X once per second. The point where the lines crossed on the circumplex was a neutral point—the position of the X at this point indicated that one was emotionally indifferent to the music. The closer the student moved the X toward a particular word, the more purely that word expressed the student’s feeling. Thus, if a particular moment in the music made the student feel calm, he or she moved the X toward that word. If the music began to make the student feel more tense, then he or she would move the X away from “calm” and toward “tense,” and so on. If a feeling was best expressed by a mixture of the meaning of two words the X could be positioned at an intermediate location that indicated that fact. The instrument actually recorded the coordinates of the X's position on the two dimensions, pleasantness and activation, of the emotion circumplex."
Apparently, this is software that was developed in LabVIEW by a third party. Any help or advice anyone could offer in this area would be greatly appreciated. Thank you! SallyKind of hard to say for sure without at least seeing a screenshot or two, but if I had to guess, I'd say they probably had an image of the circumplex on the front panel, and perhaps set the mouse cursor to a big red X (which can be done using the Set Cursor VI), and then just tracked the mouse location, which can be easily done using pane events. There is an example that ships with LabVIEW on how to use Set Cursor, and examples on the event structure. Attached is a simple example just for demonstration.
Attachments:
mouse track.vi 14 KB -
Error in AR - Auto Invoice Import Program
Hi,
Please help me out for AR - Auto Invoice Import Program.
When i am running Auto Invoice Import Program in UAT instance then its getting completed but with error and error is not reflecting in RA_INTERFACE_ERRORS_ALL table.
Initially when i ran Interface Program in CRP instance then the program was successfull, but in UAT instance it is giving error,
The Log is as follows, Its a big log but to get an idea please find the few starting lines of the same.
Regards,
Sitesh
org parameter (raamai) = ~91~
raassc()+ Current system time is 02-APR-2012 01:42:57
org parameter (raassc) character = ~91~
org parameter (raassc) numeric = ~91~
raassc()- Current system time is 02-APR-2012 01:42:57
raagsp()+ Current system time is 02-APR-2012 01:42:57
raagsp()- Current system time is 02-APR-2012 01:42:57
raaini()+ Current system time is 02-APR-2012 01:42:57
raaapx()+ Current system time is 02-APR-2012 01:42:57
raaapx()- Current system time is 02-APR-2012 01:42:57
raagbo()+ Current system time is 02-APR-2012 01:42:57
Dumping data fetched from RA_BATCH_SOURCES
batch_source_id = 1141
batch_source_name = Export Entry
auto_trx_numbering_flag = N
copy_doc_number_flag = N
cust_trx_type_rule = I
sold_customer_rule = R
bill_customer_rule = R
bill_address_rule = R
bill_contact_rule = N
ship_customer_rule = R
ship_address_rule = R
ship_contact_rule = N
memo_reason_rule = R
term_rule = I
invoicing_rule_rule = R
accounting_rule_rule = R
unit_of_measure_rule = R
agreement_rule = R
inventory_item_rule = R
fob_point_rule = S
ship_via_rule = S
invalid_lines_rule = R
salesperson_rule = I
sales_credit_type_rule = I
accounting_flexfield_rule = R
invalid_tax_rate_rule = R
rev_acc_allocation_rule = P
gl_date_period_rule = R
create_clearing_flag = N
derive_date_flag = Y
sales_credit_rule = P
sales_territory_rule = R
receipt_method_rule = R
customer_bank_account_rule = R
related_document_rule = R
memo_line_rule = R
allow_sales_credit_flag = Y
receipt_handling_option = N
allow_duplicate_trx_num_flag = N
raagbo()- Current system time is 02-APR-2012 01:42:57
raaggi()+ Current system time is 02-APR-2012 01:42:57
raagixpfx = 0
raagixtpf = 0
raagixddf = 1
raagixacf = 0
raagixagd = 0
raagixatn = 0
raagixadn = 0
raagixcte = 0
raagixdfd =
raagixctc = 1683960112
raagixrmx = T
raagixfdx = 02-APR-12
raagixbix =
raagixbsi = 1141
raagixbnx = Export Entry
raagixoix = 91
raagixrix = 3584119
raagixpix = 20428
raagixpai = 222
raagixuix = 1458
raagixunx = EMS
raagixanx = AR
raagixlul = 2968171
raagixasc = 1
raagixrho = N
raagixrsf = 0
raagixcbf = 0
raagixuax = 1
raagixsnf = 0
raagixtao = 1
raagixptf = 1
raagixstf = 0
raagixrfi = 0
raagixtac = 0
raagixcai = 50388
raagixsbi = 2022
raagixcpr = 2
raagixmau =
raagixmlx = 3
raagixmbx = 99999999
raagixafp = Account
raagixifp = Item
raagixtfp = Sub-branch
Argbdf = 1
Argddo = -9999
raaggi()- Current system time is 02-APR-2012 01:42:57
raaseb()+ Current system time is 02-APR-2012 01:42:57
raaseb()- Current system time is 02-APR-2012 01:42:57
arcdsu()+ Current system time is 02-APR-2012 01:42:57
arcdsu() error level: 3 array size: 99999999 insert array size: 99999999
arcdsu() Use Invoice Accounting For Credit Memo: Y
arcdsu()- Current system time is 02-APR-2012 01:42:57
raaini()- Current system time is 02-APR-2012 01:42:57
raapft()+ Current system time is 02-APR-2012 01:42:57
raagtr()+ Current system time is 02-APR-2012 01:42:57
crb->raaucrpn = RAXTRX
crb->raaucrcr = 3584119
crb->raaucrnt = 0
crb->raaucrml = 3
raagtr()- Current system time is 02-APR-2012 01:42:57
raamil()+ Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raacrf()+ Current system time is 02-APR-2012 01:42:57
raacrf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
raaasf()+ Current system time is 02-APR-2012 01:42:57
raaasf()- Current system time is 02-APR-2012 01:42:57
UPDATE RA_INTERFACE_LINES
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
ORG_ID = NVL(ORG_ID, :b5),
TRX_DATE = TRUNC(TRX_DATE),
GL_DATE = TRUNC(GL_DATE),
ORIGINAL_GL_DATE = TRUNC(GL_DATE),
CONVERSION_DATE = TRUNC(CONVERSION_DATE),
PURCHASE_ORDER_DATE = TRUNC(PURCHASE_ORDER_DATE),
RULE_START_DATE = TRUNC(RULE_START_DATE),
RULE_END_DATE = TRUNC(RULE_END_DATE),
SALES_ORDER_DATE = TRUNC(SALES_ORDER_DATE),
SHIP_DATE_ACTUAL = TRUNC(SHIP_DATE_ACTUAL),
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID, RA_CUSTOMER_TRX_LINES_S.NEXTVAL)
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (3584119))
AND BATCH_SOURCE_NAME = 'Export Entry'
AND TRX_NUMBER = 'E512000002' AND LINK_TO_LINE_ATTRIBUTE1 IS NULL
AND LINK_TO_LINE_ATTRIBUTE2 IS NULL
AND LINK_TO_LINE_ATTRIBUTE3 IS NULL
AND LINK_TO_LINE_ATTRIBUTE4 IS NULL
AND LINK_TO_LINE_ATTRIBUTE5 IS NULL
AND LINK_TO_LINE_ATTRIBUTE6 IS NULL
AND LINK_TO_LINE_ATTRIBUTE7 IS NULL
AND LINK_TO_LINE_ATTRIBUTE8 IS NULL
AND LINK_TO_LINE_ATTRIBUTE9 IS NULL
AND LINK_TO_LINE_ATTRIBUTE10 IS NULL
AND LINK_TO_LINE_ATTRIBUTE11 IS NULL
AND LINK_TO_LINE_ATTRIBUTE12 IS NULL
AND LINK_TO_LINE_ATTRIBUTE13 IS NULL
AND LINK_TO_LINE_ATTRIBUTE14 IS NULL
AND LINK_TO_LINE_ATTRIBUTE15 IS NULLHi Pk,
in log file i found the below:
arcdsu() error level: 3 array size: 99999999 insert array size: 99999999
and
raaafs()+ Current system time is 02-APR-2012 01-42-57
Failed to allocate memory for memptr
Error calling raaafs()
Error calling raaffc()
Error calling raaaui()
is it related to memory size????????
let me know
Regards,
SItesh -
After my MacBook Pro wakes from sleep, the trackpad movement (mouse) reveals the sign-in screen in little squares.
Hello there, peijinc.
I understand your MacBook Pro seems to be taking longer than expected when coming back from sleep. It sounds like you may be seeing the Mavericks feature called Safe Sleep. The following Knowledge Base article offers up an explanation of how that feature works:
OS X: Saving energy with Sleep
http://support.apple.com/kb/HT5963
If you feel that this period of time is greater than normal, this article offers some practical steps to troubleshoot your Mac:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Although the entire article offers relevant steps, this section may prove most useful:
If the steps above do not resolve your sleep-related issue, try these additional recommendations.
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
Runtime Images are being loaded only when i move Mouse Over them
Hi ,
I am displaying Images on to a Datagrid at Runtime .
The isssue is that Images are being loaded when i move mouse over the rows of DataGrid
Please tell me , how to resolve this issue ??
Thanks .If you know the size of the images, have the renderer return measuredWidth
and measuredHeight that reflects the size of the image (or approximate
size). There should be past discussions on this topic. -
When I send mi presentation to a Quick Movie, the program record only the last frame
Why when I send mi presentation to a Quick Movie, the program record only the last frame, how I do to record the whole presentation of 52 frames
I mean when I try to burn a CD.
-
Auto-Invoice Concurrent program running very slow
Hi,
EBS 11i
Help please.......
Our 2 users are running Auto-Invoice Concurrent programs and it made our 4-cpu (quad core) server spike to all 100%
We have just bounced back the Oracle Apps but still it getting very slow. Is there a way to tune the auto-invoice program?
This problem did not happen before only lately :(. Is it because our data is growing bigger?
Thanks a lot
Ms IndayThanks hussein/helios .....I am panicking now :(
I want to cancell all the queued Autoinvoice Master Program that are submitted so I can trace if they are the ones causing the problem. The Autoinvoice Master Program is calling a child program Autoinvoice Import Program. I also cancelled these child programs. but now I can not cancel the Master Program. Its "Phase" is Running but its status is "Paused". When I cancel it I got error >
Request 2259845 can no longer be cancelled. The Concurrent Manager process
that was running this request has exited abnormally. The ICM will mark this request as complered with error.How can I delete this RUNNING-PAUSED Autoinvice Master Program?
How do I clean up these aborted processes?
Thanks a lot -
Auto Invoice Import Program not processing records
Hi,
I wrote a procedure at back end to submit the auto invoice import program. I find concurrent program being submitted but none of the records are processed.
Please find the code given below for reference.
APPS Version : 11.5.10.2
fnd_global.apps_initialize(2709,50325,222);
l_request:= FND_REQUEST.SUBMIT_REQUEST
(application => 'AR',
program => 'RAXTRX',
description => 'Auto',
start_time => NULL,-- To start immediately
sub_request => FALSE,
argument1 => 'MAIN',
argument2 => 'T',
argument3 => '24',--batch_source_id
argument4 => 'AR Batch Source', --batch_source_name
argument5 => to_char(SYSDATE,'YYYY/MM/DD HH:MM:SS'), -- should be in format -- RR-MON-DD
argument6 => '',
argument7 => '',
argument8 => '',
argument9 => '',
argument10 => '',
argument11 => '',
argument12 => '',
argument13 => '',
argument14 => '',
argument15 => '',
argument16 => '',
argument17 => '',
argument18 => '',
argument19 => '',
argument20 => '',
argument21 => '',
argument22 => '',
argument23 => '',
argument24 => '',
argument25 => '',
argument26 => 'Y',
argument27 => 'Y',
argument28 => '',
argument29 => 155, -- org_id
argument30 => chr(0) -- end with chr(0)as end of parameters
COMMIT;
- - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - -Pl post the log of the concurrent request. Pl see if MOS Doc 1089172.1 (Troubleshooting Autoinvoice Import - Execution Report Errors (Request Status = Completed)) can help
HTH
Srini -
Auto execution of program after 1-2 minutes
Hi all,
I want to auto execute a program whenever one or two rows of data are in the table.
In detail the scenario is 'I want to upload the data which ever i am taking in my ztable, so how to run the bdc program it self whenever there is data in the table.
gauravHi gaurav,
the SAP world takes a lot of it's life from generic solutiona for common problems being re-created hundreds or even thousands of times solvin very similar tasks.
But all solutions are created in such a specific way that they can not be re-used without major changes.
Do this:
Enter entry manually via table maintenance and check in lock overview (SM12?) what lock is set for yopur Z table.
In your Z program for entering data in the Z table, try so set the same lock using Enqueue function.
If you can't set the lock, wait for some time, try again. If no success, cancel with Error message.
You Z program for processing the Z table sholud so the same thing: Lock the table (Enqueue), process the entries and delete everyprocessed entry (or mark it as processed).
This program can be scheduled as a job to run every 10 minutes, one hour, daily or whatever is required.
Please do not expect to get the full ABAP code here, just do what you get paid for. Start programming and feel free to ask when you get stuck.
Kind regards,
Clemens -
Auto Invoice Import Program is not grouping by Transaction Type
Hi All,
The Auto Invoice Master program which inturn spwans Auto invoice Import program is not grouping by Transaction type. It is printing for each transaction individually.
What could be the reason for this to happen?
Please let me know.
Thanks,
PrathimaDear,
You must define "Auto-Invoice Grouping Rules". Define Group by column of the interface table where u are moving transaction type.
Hope it will helps u
Regards -
Hi All,
I have problem in exceuting the Auto Invoice Master Program, which is taking long time to complete. Can any help me why is this taking too much time.
we are using 12.0.6
thnxsHello.
To trace the program, login as System Administrator, navigate to Concurrent/Programs/Define and query the program name. Check the Enable Trace checkbox.
The trace file will be placed on the $ORACLE_HOME directory/admin/udump. Run the tkprof on the trc file and see which code is taking too long.
Octavio -
Hello!
I have program from adobe (dreamweaver, illustrator, and more) on my old computer, now I would like to move this programs to my new coputer, How do I do?Yes thats right! =)
But when i check my serials number on my side I have two serialnumbers.
One for Adobe Acrobat Professional
and one for Adobe Design Premium.
But like u said I've CS5 Premium Suite!
Med Vänliga Hälsningar
Rebecca [email protected]
Date: Tue, 20 Aug 2013 10:07:07 -0700
From: [email protected]
To: [email protected]
Subject: Move Adobe Programs
Re: Move Adobe Programs
created by ProDesignTools in Dreamweaver CC - View the full discussion
Rebecca, do you mean you bought an Adobe suite of programs? (with a single serial number)
Based on the applications you mentioned, it sounds like it could be the CS5 Design Premium Suite - is that right?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5610947#5610947
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5610947#5610947
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5610947#5610947. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
How do I use one set of XML data and populate multiple layouts with it?
I have an XML document with root element BOOK. Inside BOOK are PAGEs. (I also have each PAGE as it's own XML file, so that I can update each PAGE individually.) I have a print layout of 6"x9" and I want to create an iPad layout (H & V). When I crea
-
How do I add Adobe Creative Suite to my MacBook Pro...?
@Forgive me for asking what may be a really silly question.... but here goes..! I currently have the Adobe Creative Suite on my Mac desktop and now I'm wanting to add it to my new MacBook Pro. How do I install all the apps without having to purchase
-
Problem with Lovs in same row of table
Hi all, I am using two lovs in a row of advanced table.In first lov I am searching for few attributes and storing on of the values in a formValue(by using addLovRealtions(....,...,...,LOV_RESULT,...)). Based on this value I am using LOV_PASSIVE_CRITE
-
Hello all I faced a recent interview question , that stumped me. The case given to me was like this:- today is 3 Jan Production will start on 5 Jan for 100 items Stock will be available on 8 Jan for 100 items Customer asked for 100 items on 9 Jan I w
-
Movie and audio not synchronized in the swf file.
Hello, I have a main movie that call and display movies from the library. In each of those library's movies i have an animation on a layer and a sound (about 15 secondes) on another layer which i want synchronize. When i check each movie on my .fla d