Auto Save to iCloud

iCloud seams to be working fine on my mac and iphone. How do I set up auto save to iCloud so I can save stuff from Numbers and Pages to access on my iphone?

Sjazbec wrote:
In other words : iwork 09 on OSX will NOT sync, regardless of "documents and data" set to yes in icloud's controlpanel.
You need to manually up- and download office documents via a Browser at ww.icloud.com/iwork. Once uploaded, they are in your iwork apps on iOS5.
That is not entirely a bad thing. iCloud is having reliability problems. You should always keep an offline backup of any files in iCloud.

Similar Messages

How do I auto save all newly created contacts to a pre-determined group in Maverick? Could do this on iTunes, can't do it on iCloud...

Hi,
Before upgrading to Maverick, I used to sync all my contacts via iTunes.
iTunes used to have an option to "Add contacts created outside of groups on this iPhone to: (drop-down)".
I had created a group called ' RECENTLY ADDED ', so that every time I saved a new number whilst meeting people / networking, etc, it would auto-save to that group. I would then sync via iTunes, and voila- all my new contacts would be in there.
As a marketer, I allocate my contacts into various complicated groups... so from there, I would proceed to move each contact into their relevant group, and then 'delete' from group (not delete completely). I would repeat this step until all contacts were moved out, leaving an empty 'recently added' group.
The next time i was out networking/saving new numbers, the process would repeat...
Now that I have upraded to Maverick and using iCloud syncing, I cannot find this feature.
The previous method I used worked brilliantly, and I do not always have time to add notes, etc (for a smart group) when saving new numbers.
I'm struggling to find a solution now that I'm using the iCloud syncing service...
Any suggestions to make it easy??

If the information is in iTunes on the computer you have synced with in the past another sync, being sure you select the items you want on the iphone, should copy those things back to the iPhone.

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

Want to upgrade to Mountain Lion, but CS6 questions about Auto-Save need answers...

Hi,
I'm on Mountain Lion for all my "non-critical" work, but I'm still running the latest Snow Leopard on my main desktop machine, running CS6 Design & Web Premium. I've avoided the switch primarily because of the auto-save feature that Apple placed into ML. I haven't found a satisfactory answer anywhere on the web to this basic question...is auto-save a problem, as Apple implements it, with CS6 and working on images?
In particular: 1. I work on very larger files, 4GB+ in size regularly, and I don't wan't the peformance hits associated with constant saving, 2. I make changes to images, downsizing them, croping, color corrections, etc. so that I can make jpg proofs for clients or myself. These are more "intermediary" images and not intended to be saved. I don't want to downsample an image, flatten it to creat a jpg for proof and have it overwrite the original image layered, high res by mistake. Does this happen with photoshop, or does Adobe avoid the auto-save that Apple uses?
I have all the latest iOS gadgets and it's becoming quite cumbersome managing multiple sets of iCloud info, etc. without being on ML. I'd like to make the switch, but at the cost of losing work, etc. Can someone with experience on ML & CS6 give me any input in the matter? And, does this also apply to all the other Adobe apps in CS6? I'm constantly making minor changes and edits that I usually "undo" out of and don't want saved.
Thanks.
Craig

So, in other words, photoshops behavior works the same, using save as..., etc. as it did under Snow Leopard? I should expect the auto-save behavior that occurs in apps like iPhone, etc., where i can actually lose the original because of the constant backups, etc.?
Thanks.

When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help!

When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help! - Chip

This is a mean one. I don't have time to try and find the cause, but at least some answers to your questions, to hopefully shed some more light on this.
Where was the original destination? iCloud folder.
On another drive? Tried to Save as... to Hard Drive (also changing name of file), always get the same non-descript short Error "Couldn't auto-save document." (slides down from top with a yellow warning triangle). Status to the right of document name is "Not Saved".
Another Server? No access at this time.
I also tried File, Revert to, Browse all versions, to check what I'd be losing. Saw I wasn't losing much and selected the last version and pressed Restore - same error. In the end I just quit Pages and re-opened. The document opened with the last few edits missing (but with the status "Edited" next to the name). I re-edited and could save. Good old habit of saving often.

Auto-save in Logic 8

Hey Guys
I've been trying to find an option for auto-save in Logic (and to set how often it does this)... but I can't find anything...
Does it just do auto-save in the background? Or is there no auto-save feature?
It's easy to forget to keep saving in a long session and would be nice to know Logic does it for you!!
Cheers
Mike

I'm sure that Logic will never need auto save.
the reason is: Logic have a .crash save function...
it works great... (if you don't use 3rd party plugs with false Audio Units validation Pass.
I'm a Logic user from the Notator version...
Auto save is dangerous...
the only usefull thing should a Fix with save before Crashing happen
Auto save is not "intelligent solution"
*Logic 9 should be comes with an intelligent way to save function that works ONLY WHEN AND IF NEEDED*
I'm sure that Logic 8.1 will solve the .crash issue with 3rf party plugs that are intentionally developed with only AU version bugs.
this is another of the "milion" fermusic ideas about sh*t auto save dangerous and *really obsolete* function
No Auto save... *vote for an intelligent way to automatic save function*
(vote for fermusic )
Thanks... expacially focused to Bee Jay and Erik

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

I finally got my iphone out of recovery mode, after 7.1.1 but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

I tried updating my iphone 4 to 7.1.1 and it went straight into recovery mode.... I finally got my iphone out of recovery mode, but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
My Mac Mini and MacBook do sync as they should with iCloud.
When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

[OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

Hi,
I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
Some information about my OIM config:
- Prepopulate adapters are set up on both forms (parent and child)
- "Auto prepopulate" and "Auto save form" are set up at Process Definition
- For direct provisioning, I have created an access policy with an associated group which has a membership rule
What it is working:
- Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
- All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
Testing direct provisioning:
- I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
- The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
- I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
- The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
"SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
My guess:
- It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
Regards,
Hugo
My environment:
- Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
- Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

An update:
I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
So please if anyone can confirm:
- Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
If not, any suggestion?
Regards
Hugo

CS6 Auto-Save: 1 step forward, 1 step back

I have done a little testing with the auto-save, and there is some progress with CS6 - especially in the area where earlier versions would stop playback or scrubbing to fire off an auto-save.
It looks like the auto-save does not stop playback or scrubbing on the timeline anymore. It will stop you from other operations such as moving an audio slider or other non-critical mouse clicks. I tested with 1 minute intervals, and it appears that it won't auto-save during playback or scrubbing in the background, and will wait until the next interval after playback has stopped until it saves. (Instead of taking the very next possible moment after playback has stopped to makeup for the save) This seems like it could create the possibility that if you are playing back or scrubbing during multiple interval moments, you could have a long period where there are no auto-saves - especially if you set the interval to a high number. Like I said, I only tested with a 1 minute interval, so maybe this functions differently if you save every 10 or 20 minutes. Maybe then it will do an auto-save right after playback has stopped if it has been awhile.
The step back is that if you hide PPro, (I'm on a Mac, btw) instead of just bouncing the dock icon during an auto-save like previous versions, it will actually bring PPro to the front and block out/cancel anything else you are doing on your machine. How annoying! I can't figure out the reason to have it function like this. If it is simply hidden behind other windows, it does not do this, instead only brings to the front the small auto-save progress bar - It only happens if you hide the appplication. For example, if you are moving back and forth between PPro and AE, you could be working away on a comp in AE and suddenly PPro jumps to the foreground to let you know it did an auto-save. Since I have 2 monitors, I like to hide apps that I'm not working in to hide pallettes and other windows so I can have my desktop back. Seems like the solution for now is to not hide PPro ever and to do a proper save more often to avoid the issue of potential long periods of no auto-saves. (And submit a bug report?)
Anyways, long post for a potential trivial thing, but for those who care about this, it is a change. Anyone else experiencing this?

Jim,
Exactly, and that is what the "1 step forward" is with CS6. It drove me crazy when Auto-Save would interrupt playback. I was suggesting that it would be a better option that if you are playing back during an auto-save interval, it should take the very next opportunity to fire off a save, like maybe after hitting stop when there is a moment of downtime. However - in my testing - it looks like it skips that interval completely and waits for the next one. So, if you have it set to save every 10 minutes, but are playing back your timeline during each of those 10 minute intervals, it will never auto-save even if there are large stretches of time in between when you are doing nothing. It seems like it could be more intellegent about when it saves, and do it quieter in the background.

Auto save is not working

There is some problem after upgrade to Lion, Auto save version is not working in Iwork and anyone can fix it please advised. T.T

I have experienced projects not being auto save back-uped, and linked that to file structure problems (like I moved the project from the folder where it originally was created, or I changed the folders name where the Pr project was residing after starting it. I think that these things can lead the Auto-Save to get confused sometimes. This can also happen in Ae as well.
I have gotten used to making a duplicate of the project every day or at junctures of major change in the finder. The Mac finder duplicates the project file with the added word "copy" so I know that it isn't the original project file. I then add the date and time to the end of the file name _yymmdd_hh and send a copy to another drive.
It's too bad that there is no option in Pr to have it save the Auto-Saves to different drive than where the original is.
I also use a droplet created with a Mac renaming utility called "Name Mangler". Here is the macro for the advanced area of the re-namer in case anyone is interested.
[concatenate
<name>,
"_", [modified "%y%m%d_%H"],".", <extension>
I just drop the project file onto the droplet and it gets appended with its modification date.

How to Auto Save in iteractive forms

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

How to auto save and pre-fill some textfields

first time i open a pdf, there are some textfields. they are all empty.
i click on a button to call a web service. this returns some text and fill in those textfields.
if one of these textfields, "message", has got an auto-filled text "success", then the pdf needs to remember the text in some of the rest of the fields. next time when the user open it, those fields should be with the text generated last time.
notice that the "Do you want to save the file" auto-popup window won't meet my requirement. even if the user clicks on "no" for this popup window, now that i get a "success" transaction from the web service, the fields should be saved.
i read through this, but may not be able to use it. i only have LiveCycle Designer ES3. I don't know how those adminui or process work.
http://livecycleapps.wordpress.com/2009/10/21/livecycle-es2-using-action-profiles-to-pre-f ill-a-form-for-display-in-workspace/

Hi,
in Designer ES3 there is an Auto Save option in the form properties you can activate.
Remember, the form needs Usage Rights to be savable through Reader, so you need Acrobat to apply those rights to your form first.

Auto Save and Versions

Where can I control Auto Save and Versions? I can't find it in System Settings.
Can I control it by terminal commands?
On http://www.apple.com/macosx/what-is/ Apple claims:
Versions creates a new version of a document each time you open it and every hour while you’re working.
While here http://www.apple.com/macosx/whats-new/auto-save.html Apple claims:
Forget about manual saving and forge ahead with confidence. Auto Save in OS X Lion automatically saves your work, while you work, during pauses and every five minutes. And Lion saves changes in the background so you're never interrupted with progress bars.
So I wonder every five minutes or every hour? Would be nice to make sure on each Mac itself whether it auto-saves every five minutes or every hour and to actually allow its user o set the frequency.

It does both. It saves your work in the current version every 5 minutes. Every hour, it creates a new version of the document.
I haven't searched for any version settings, yet.

"An error occurred while trying to save the iCloud account"

cannot logon to my iCloud account on iPhone but have no problem logging on mac, so username+password is ok. Get the above error message.
tried to reset all settings but did not help.
Any ideas?

Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
My Mac Mini and MacBook do sync as they should with iCloud.
When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

Auto Save to iCloud

Similar Messages

Maybe you are looking for