Auto select for single row LOV

Hi,
I am using jdev 11.1.1.4.
I need to automatically fetch the record from LOV ViewObject if the LOV ViewObject has only one row.
I am new to adf , can anyone give an idea on this?

Hi,
Did you try unchecking "Include "No Selection" Item" checkbox in the Create LOV dialog's UI Hints tab page?
-Arun

Similar Messages

Selecting a single row from table control of standard transaction via repor

Hi Experts,
I have a requirement of selecting a single row from standard trasaction via ineractive report.
For eg. for a given document number & item number, how can i select the specified item from transaction VA03.
I am using call transaction to naviagate to the screen but unable to select the specified item.
thanks in adavance for your Help.

You mean selecting the item via BDC?
Have you tried something like:
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(01)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                              'X'.
or whatever your dynpro is to select the first row?

How to select a single row in a report for data entry?

Hello All, and Greetings.
I am a newcomer, with no experience in Apex, and in need of help.
I have to generate a report with some read-only columns and two write columns. These will be the result of a SQL query.
For the sake of robustness in data entry, a row has to be selected prior to data update. The document specifies that a radiobutton for each row be present, and the corresponding row selected accordingly by clicking its radiobutton. There could be any number of rows returned in the report, which means that the number of radiobuttons will vary dynamically according to the number of returned rows.
1. So my question is, how do I construct the page to do this? Please remember I am a newbie, so detail will be appreciated.
2. Another question is, how do I change the fonts and colours of the names displayed along with the listboxes?
Thank you very much for your attention. Any help will be warmly received.
With regards,
Arindam.

You may find this article useful: http://balusc.blogspot.com/2006/06/using-datatables.html
P.S: please don't reply with "but I cannot read and write code, I can only drag'n'drop!".

Add to Selection Fails for Single Row/Column

Hi,
Has anyone encountered this. Making additions to selections with the Rectangular and Elliptical Marquee tools works fine. However it fails with both single row and single column marquee tools. This was doable with my previous version of Photoshop but fails on CS4. I'm running CS4 64 bit on Windows 7.
Thanks.

Hi,
Yes I did
However this was evidentially some sort of temporary insanity on the part of PS.
I just a short while ago shut down PS and reopened it and abracadabra the problem disappeared.
Of course this isn't the first time that shutting down and restarting PS has "fixed" some problem I was having.

BI-IP - Bex Analyser - select excel single row and aplly planning function

Hi experts,
In BI-IP (BW 7) with Bex Analyser, is it possible to select a single excel row (or a range of rows) and then apply a planning function? I know that in WAD it's possible with the binding option to select a single web item.
The purpose is to apply a revaluation factor to selected (by the user) cost elements rows in the workbook.
Thanks and regards,
MA

Hi
It is possibel in WAD to select one or many rows while executing Functions such as--Reposting; Revaluation etc.
However, you should be in a position to select the rows based on....unique identifier such as Require ID; Request #; Serial #; ....this is more so in case of multiple entries for the same cost element for different combinations.
Regards
Srinivas

Select a single row from a billion row table

This is a fictitious scenario, how would you write a select statement on a table with a billion rows. It never returns anything,right? Somebody was suggesting a stored procedure.
As an example : Assuming a Table with columns Account(int), TransDate(DateTime), TransNum(int) and few other columns. I need a transaction that happened on 03-05-2014 8:15PM. Clustered index on Account. Non- clustered on TransDate.
I was suggested to create a stored procedure, inside the SP you have 3 parameters: min_date, max_date, avg= min_date+max_date/2. You create a loop and feed the avg value to the max_date or min_date depending on where the row is. This is a suggestion
that I am not clear my-self but wanted to see if you guys can help me develop this idea.
Also please suggest how you would do it in your world. You guys could have much better ideas probably much simpler one's. Thanks in advance.
svk

I basically just need transaction for one particular datetime. Not any span. One of our senior developers suggested that a simple select statement takes for ever to return a single row from a billion rows and suggested a vague idea as above.
Either there is a suitable index on the column, and the SELECT will be fast.
Or there is no index on the column, and in that case it will take quite some time to find the row. The only reason to loop is that you don't want to take out a table lock, but in that case you would do something like looping one account at a time. Looping
over different time values will only mean that you will scan the table multiple times.
Erland Sommarskog, SQL Server MVP, [email protected]

Make select for each row - another solution?

For example I have a function with day before selection:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
function ABS return boolean is
ret number(10,2);
begin
for sab in (select saldod from ndv_ccli, nd_clientes where
(:p_dtvenc-dtdoc) = (select min(:p_dtvenc-dtdoc) from ndv_ccli, nd_clientes
where (:p_dtvenc-dtdoc>0)and
ndv_ccli.cod_cli = cod_cli) and
ndv_ccli.cod_cli = cod_cli order by dtdoc desc,cddb )
loop
ret := sab.saldod;
end loop;
return (ret);
end;
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
In report I use the value of this function(a) in another function(b) to sum with few values.
Output of function(b) has a lot of rows and for each row it makes select in function(a) to find the value, but actualy it is the same. Is it possible to do this select only one time and then put in function(b) only it's value? Because it makes report too slow...
tnx before

Thanx, but while compiling it says:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REP-0749: After form trigger cannot reference a report column.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Setting background for single row in JTable

Hi,
I have a table which uses the DefaultCellRenderer for cols0,1,3-5
while column 2 uses a custom renderer.
When user right clicks mouse on one of the rows i get the rowindex and colindex selected and tries to set background color for this row. but the whole table get painted(of course except 2nd column)...rather i need just the row to be colored.....any solution is greatly appreciated.the code is below....
int rowIndex=table.rowAtPoint(p);
     int colIndex = table.columnAtPoint(p);
     for (int i = 0; i < 6; i++) {
          if (i!=2){
               DefaultTableCellRenderer r = (DefaultTableCellRenderer) table.getCellRenderer(rowIndex,i);
               Component c = taskListTbl.prepareRenderer(r, rowIndex, i);
c.setBackground(Color.yellow);
          }

Maybe my reply in this posting will help:
http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1730267

Disable Lead selection for table row cloumn

HI Team,
I have table with multiple rows and multiple columns.
Based on the lead selection of the row we are displaying the some form.
But in table row there are some columns like enter date, when the user is trying to enter the date, it displaying the form because of lead selection and it is not allowing the user to enter the date.
So, I want disable the lead selection for some columns.
How can I do this?
Regards,
BAla

Hi
I think that you can get the UI Table in the wdDoModifyView method, and then the UI Column and play with his values, is something like this:
IWDTable table =(IWDTable)view.getElement( ");
And then play with the "column" methods.
Josué Cruz

How do I disable auto select for the path selection tool?

For the move tool you can choose to disable auto selection, auto select a group, or auto select a layer. By default though the path selection tool autoselects a layer. How can I disable autoselection?

I can’t seem to reproduce what you describe.
Please elaborate, possibly with the help of some screenshots.

How to diasble selection for particular rows in a Table?

im currently working on a multiple select table.. i need to disable the checkbox for some particular rows. How can i get runtime control over that cell??

To disable one or more rows of single or multiple selection in your table, add the following code to your controller processRequest method:
OATableBean tableBean = ...;
tableBean.setSelectionDisabledBindingAttr("Disabled");
In the example above, "Disabled" represents the Boolean view attribute that returns 1/"Y" if one or more rows is (are) to be disabled, otherwise it returns 0/"N". The view attribute "Disabled" must belong to the same view object as the one associated with the table items.
If its an advanced table, use the same method on OAAdvancedTableBean instead.

IPhone 5 showing no network when auto selected for carrier, select manually signal ok, software of hardware problem?

Hi,
I have a iPhone 5, since day one I have had poor reception, 1 bar, when my daughters Samsung S3 has 3 bars, same network btw. It makes me feel I bought the wrong phone. If one more person at Three or Apple tell me to restore my phone to factory settings, I am going to scream. Also when network is selected as auto, the phone, when it feels like it goes to no service. It is only when I select the network manually, does it get a signal.
The phone is still under Apple's 90 day support, I was reminded today by a Apple rep of this. After the 90 days I would have to buy Applecare for any software related problem. So basically if Apple do not ressolve the problem with my "not fit for purpose phone" within the 90 days, I will have to pay for it. This is not good customer service Apple, I am someone who has believed in your productsas I have an iMac and iPad. I waited years to get an iPhone because I had the 3GS, which I thought was crap, the iPhone 5 convinced me to give the iPnone another try, I have had nothing but problems with it, previous phone was a Samsung Galaxy Note, no problems at all.
Has any one else had this problem with the iPhone 5?, I thought it might be Apple's dreaded aerial problem that caused so many problems on the iPhone 4.
I would be grateful for some suggestions, I have already been advised to use it as an expensive doorstop, not funny.
Many thanks.

Well I had the exact same problem with my Iphone 5s, I tried many things such as turning the airplane mode on/off, restarting the device and also did a network settings reset. Nothing helped.
The next thing I did was to do a general reset via iTunes to factory settings (Made a backup first. Very important if you can connect to iTunes, it's a MUST). When the phone booted-up again, I had to ''activate the phone. But to activate it, I needed a connection with a network. But that was the whole problem so I was stuck and couldn't do anything with the device.
So I called the Apple support centre. We tried a few things, they all dindn't work. The last option (which worked for me) was to do a recovery (I have no idea what this reset is called) via the device+ iTunes.
To perform the reset, please follow these steps and hopefully it will work for you as well.
1. Open iTunes
2. Connect your USB cable to the computer, NOT to your device yet.
3. Power Off your device, and be sure that it is Off.
4. Press the home and hold it.
5. Connect the USB cable to your phone. You will see a iTunes logo on your device, you can release the home button.
6. Do a recovery via iTunes. iTunes will now recover the phone.
If it doesn't work the first time, try again. I had to do it twice and luckily it worked the second time.
I hope that this will help, Good luck!

AdvancedDataGrid grouping doesn't work for single row

Hi All,
I have an AdvancedDataGrid on my application dashbaord with grouping and summary, recently I came across this problem while testing.
If I have only one row data, then ADG doesn't display the record. What could be the error?
Thanks,
Shankar.

I don't know why but I tried playing some movies in the new Quicktime and then the very same ones in Front Row and they played just as well. But before this little experiment I tried those movies in Front Row only and what I got was horrible. Very rough motions and a very pronounced raster type (jagged) edges visible in many pics, especially when people were moving and when the color of their clothing contrasted sharply against the background, ie, yellow clothes against a black shadow.
Weird stuff.
BTW, for the Mira users, you have to DISABLE Mira in order for your remote to work correctly in Front Row, otherwise you will have selection problems, etc...

How to display total in alv only for single row

Hello,
I wish to replace VAT field in my ALV OUTPUT from another ITAB using READ TABLE. But in ALV output I have multiple rows for one document number.
So the value is assigning to all the rows in output, is it possible to assign that VAT value to only one row ( to any one record from output with corresponding document number) .
Thanks in advance.
Regards,
Ritesh Inamdar

Hi Sudeesh,
I am fetching data for PO details, GR details along with condition types of PO.
All data is collected in ALV OUTPUT itab, after this I am trying to assign the values of VAT from another itab in ALV OUTPUT LOOP using READ TABLE with reference to PO-PO_ITEM-CONDITION_TYPE.
Now, when the alv loop is getting executed and in that I am fetching data for VAT using READ statement, the program is assigning VAT to all records of output alv with comparison of PO-PO_ITEM-CONDITION_TYPE.
see:
LOOP AT it_alv ASSIGNING <fs-alv>.
     READ TABLE it_vat ASSIGNING <fs-vat>
          WITH KEY ebeln = <fs-alv>-ebeln
                           posnr = <fs-alv>-posnr
                            kschl = 'JVCS'.
     IF sy-subrc = 0.
          <fs-alv>-vat = <fs-vat>-kbetr / 10.
<fs-alv>-vat_val = <<fs-alv>-vat * it_alv-menge.
     END IF.
END LOOP.
Please refer above.
Thanks.
Ritesh

Report output format xml, missing column while open in excel for single row

Dear,
There is a strange case, we have an customize concurrent program to display output in xml format. Now Problem is, if query get single record on the bases of parameter then there is no column heading available in excel. However, if parameter meet more than one record then there is no issue with column heading and reports is working find.
Pls have an idea?

Dear Pk,
Here is an example, will show the actual problem. Let explain you, first i have run report by restricting query on single record which output name is "output1", again i run same report by changing where clause so it return multiple row which is "output2". if you past code in text document each one and save it as xml but when you open this file in excel report you will find column heading which rows consist multiple row, however, ouput1 file have no heading columns that's a problem.
1.Oputput1
<?xml version="1.0"?>

<DEPTNO>
<LIST_G_EMPNO>
<G_EMPNO>
<EMPNO>7839</EMPNO>
<ENAME>KING</ENAME>
<HIREDATE>17-NOV-81</HIREDATE>
<SAL>5000</SAL>
<DEPTNO>10</DEPTNO>
</G_EMPNO>
</LIST_G_EMPNO>
</DEPTNO>
2.Oputput2
<?xml version="1.0"?>

<T01103240>
<LIST_G_EMPNO>
<G_EMPNO>
<EMPNO>7788</EMPNO>
<ENAME>SCOTT</ENAME>
<HIREDATE>09-DEC-82</HIREDATE>
<SAL>3000</SAL>
<DEPTNO>20</DEPTNO>
</G_EMPNO>
<G_EMPNO>
<EMPNO>7902</EMPNO>
<ENAME>FORD</ENAME>
<HIREDATE>03-DEC-81</HIREDATE>
<SAL>3000</SAL>
<DEPTNO>20</DEPTNO>
</G_EMPNO>
</LIST_G_EMPNO>
</T01103240>
Hope you got it.

Auto select for single row LOV

Similar Messages

Maybe you are looking for