Auto start a program without logon on Windows Server 2012

I develop a software that starts at server startup without login, it works fine with older versions of Windows Server (2003, 2008) with 2012 my executable program that starts only when a session is opened (administrator or user).
My program uses a 32bit architecture it is found in:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ Microsoft \ Windows \ CurrentVersion \ Run
How can i make my program starts automatically after any system reboot without logon?
Thank you for your cooperation

Make it a service and configure it to start automatically.
.:|:.:|:. tim

Similar Messages

CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.

Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

Set up a smart card for user logon to windows server 2012 R2

Good Evening,
I have Windows Server 2012 R2 Datacenter edition (dreamspark license)
Is it possible to successfully set up smart card logon to a server ? I already have the smart card reader, smart card and the certificate (which is also my digital signature) I know how to setup a DC role (as far as I know, the server has to be in a domain
to use smart card logon) I would like to logon using to my PC using a smart card and set the certificate I already have to use as a certificate for logon.
Kind Regards,
Tomasz

It would take a few things to do this, and could cause some security issues. In short, I assume the certificate you "already have" came from another environment or a commercial provider. You would need to configure your computer to trust that CA
to be an issuer of smart card authentication certificates. That effectively moves a good portion of your computer security control out of your environment. For many environments that is an unacceptable security risk.
If you dont have an Active Directory running, you will also need to make some accommodations to the standard guides. I dont believe there are any published guides on how to do this with a single server and third-party CAs.
Here are some references for generic smart card authentications. They are not 100% applicable to your need, so some interpretation is going to be needed.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Cant see drop down menu in Report server manager even after starting the explorer with admin previlege - Windows Server 2012

Hi,
I am not able to see drop down menu in report manger, have loaded the internet explorer as administrator still it doesn't pop-up drop down menu in Windows Server 2012 platform and SQL Server 2012, can someone please help me out here, whether any settings
need to be made?
Thanks,
Harish

Hi Omar,
Thanks for the response, after getting some online help was able to fix the issue, I am using SSRS 2012, below link helped me to resolve the issue in IE 10.0 version
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/set-desktop-ie10-to-always-use-compatibility-view/f09597f0-9c3b-437f-9d33-18b5e1ba078d
Thanks,
Harish

BSOD when starting MSMQ service as domain user Windows server 2012

Hi
We have a problem with a server getting BSOD when we start a service related to MSMQ. We get the attempted execute of noexecute memory BSOD whenever we start the service as a User on the domain. When we start the service as a system local it starts without
problem. I got the crashdump here:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\170\120314-11828-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`48476000 PsLoadedModuleList = 0xfffff800`48742aa0
Debug session time: Wed Dec 3 14:41:01.892 2014 (UTC + 1:00)
System Uptime: 0 days 0:04:09.904
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck FC, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}
Probably caused by : mqac.sys ( mqac!ACCreateQueue+a77 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: 000007f982e340e0, Virtual address for the attempted execute.
Arg2: 791000010fdb1025, PTE contents.
Arg3: fffff8800485a5e0, (reserved)
Arg4: 0000000080000005, (reserved)
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0xFC
PROCESS_NAME: mqsvc.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: fffff8800485a5e0 -- (.trap 0xfffff8800485a5e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007f982e0c950 rbx=0000000000000000 rcx=0000005dff1fecd0
rdx=0000005dff34e988 rsi=0000000000000000 rdi=0000000000000000
rip=000007f982e340e0 rsp=fffff8800485a778 rbp=fffff8800485ab80
r8=fffffa800e623980 r9=0000000000000521 r10=fffffa800ec547a0
r11=0000000000000006 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
000007f9`82e340e0 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540
STACK_TEXT:
fffff880`0485a408 fffff800`48661ef1 : 00000000`000000fc 000007f9`82e340e0 79100001`0fdb1025 fffff880`0485a5e0 : nt!KeBugCheckEx
fffff880`0485a410 fffff800`48588980 : fffff880`0485a5e0 ffffd8e9`9e6056e2 fffffa80`0ec547a0 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x33f2d
fffff880`0485a450 fffff800`4850aabd : fffff880`0485a500 00000000`c0000016 fffffa80`0e603b00 fffffa80`0e623980 : nt! ?? ::FNODOBFM::`string'+0x33e85
fffff880`0485a4a0 fffff800`484cdfee : 00000000`00000008 00000000`00000000 00000000`00000000 fffff880`0485a5e0 : nt!MmAccessFault+0x3ed
fffff880`0485a5e0 000007f9`82e340e0 : fffff880`00dc5297 fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 : nt!KiPageFault+0x16e
fffff880`0485a778 fffff880`00dc5297 : fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 fffff980`00000000 : 0x000007f9`82e340e0
fffff880`0485a780 fffff880`00dc60d7 : 00000000`00000000 0000005d`ff34e988 00000000`00000000 00000000`00000000 : mqac!ACCreateQueue+0xa77
fffff880`0485a7f0 fffff800`488ab127 : fffffa80`0e5ed520 fffffa80`0d50ecf0 00000000`00000521 00000000`00000000 : mqac!ACDeviceControl+0x62b
fffff880`0485a890 fffff800`488c02f6 : 00000000`00000000 fffff8a0`00000080 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7e5
fffff880`0485aa20 fffff800`484cf553 : 00000000`00000000 00000000`0000000c fffff6fb`7dbed078 fffff6fb`7da0ff30 : nt!NtDeviceIoControlFile+0x56
fffff880`0485aa90 000007f9`8a702c1a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000005d`ff34e928 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007f9`8a702c1a
STACK_COMMAND: kb
FOLLOWUP_IP:
mqac!ACCreateQueue+a77
fffff880`00dc5297 85c0 test eax,eax
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: mqac!ACCreateQueue+a77
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: mqac
IMAGE_NAME: mqac.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: a77
FAILURE_BUCKET_ID: 0xFC_mqac!ACCreateQueue
BUCKET_ID: 0xFC_mqac!ACCreateQueue
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_mqac!accreatequeue
FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}
Followup: MachineOwner

Hi,
For BugCheck FC, it indicates that an attempt was made to execute non-executable memory. For more details,
please refer to following article.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
à
whenever we start the service as a User on the domain
. When we start the service as a system local it starts without problem
Did you mean that just use a standard domain user account to start the service, then encounter the issue? If
configure Log on as Local System account, will no BSOD issue occurred? Just a confirmation, thanks for your understanding.
Please check if you install all necessary Windows Updates on the server.
In addition, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is
not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

On Windows Server 2012 R2 the option "Show my desktop background on Start" is disabled

Since this thread is
inactive, I am starting a new one.
On windows server 2012 R2, under the taskbar properties, the option to display desktop background on start is disabled and I have not found a way to enable the same.
Please suggest, how this can be enabled.
With regards

You should take a look at this thread. They still haven't figured it out yet though, I don't believe it is possible at the moment on server 2012 even with desktop experience installed.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e26b0d5-e586-45b6-91bf-540a72dd36fc/on-windows-server-2012-r2-the-show-my-desktop-background-on-start-is-grayed-out?forum=winservergen
http://WrinkleFreeIT.com/

Windows server 2012 essentials errors

I get 2 errors in an email since I turned on my windows 2012 essentials server that I can not resolve. One is related to my router setup and the other is about the media server. Have not found any solutions to either of these problems and the router setup
show to be good on the dash board. Anywhere access is also working fine but it show the error below. Cannot get the media services to say anything except to try restarting the server and run the setup again.
CCS-SERVER: The router is not configured correctly
   The router is not configured correctly for Anywhere Access. You must configure the router to remotely access the network.
   12/7/2014 12:49:39 AM
Existing alerts:
CCS-SERVER: One or more services are not running
   The following important Windows services are not running: Windows Server Media Streaming Service (wssmss) Note: Services can be stopped when software updates are applied.
   11/13/2014 7:18:27 PM
Any help with this would be appreciated.

Hi,
à
The router is not configured correctly
Please open Dashboard, click
Settings. In Settings panel, navigate to Anywhere Access tab, did you find anything as “Issues detected. Click Repair to attempt resolving the issues.”? If it exists, please click “Repair…” button and check if can help you.
For Router Setup, please refer to following article.
Windows
Server 2012 Essentials: Router Setup
à
Anywhere access is also working fine but it show the error below.
Did you remember that encounter similar router issues when previously Set up Anywhere Access? If Remote Web
Access and other features really run as normal, you may be able to ignore it.
anywhere
access wizard issues
à
One or more services are not running. The following important Windows services are not running: Windows Server Media Streaming Service (wssmss)
Please logon the Windows Server 2012 Essentials, type
services.msc on RUN to open Service panel, navigate to Windows Server Media Streaming Service, open its Properties and start it. Did it start successfully or get error message?
If issue still exist, please open Event Viewer and check if find more clues. Meanwhile, please also check other
relevant log files.
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Installing Exchange 2013 on Windows Server 2012 R2

Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?

yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint

Join to Windows Server 2012 Active Directory.

How to I join Windows Server 2012 Active Diretory without putting manually Windows Server 2012:s ip adress at ?referred DNS server? Can someone help me?

I'm not sure what you are asking here. Are you asking how to join another server to a Active Directory domain without having to enter IP information into that other server? If so, the server joining has to have an IP address and it has to have
a DNS entry that knows about the Active Directory domain. Therefore, there are two ways to accomplish this. First is to assign a fixed IP address and DNS address to the server you are trying to join to the domain. The second is to have a
DHCP server in the environment that will assign the IP and DNS. Alternatively on the second option is to have DHCP assign the IP address and then you manually specify the DNS that knows about the Active Directory domain being joined.
No matter how you do it, it has to have a valid IP address and DNS entry that knows the location of the AD domain.
. : | : . : | : . tim

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Windows server 2012 RDP Session - Default Start Menu Layout Downloaded Apps Not Displayed

Hi,
Hopefully someone can help me to resolve a problem that's holding me back a little regarding the start menu for all users that connect to remote desktop sessions on Windows Server 2012.
I would like all users to have the same default application set upon login. Using a temporary user called 'Start Menu' I created the exact layout that I require all users to have. I installed the tile apps from the store with the 'Start Menu' user.
I then used the PowerShell command:
PS C:\> Export-StartLayout -Path "C:\Layouts\Marketing.xml"-As XML
This then gave me the following XML file:
<launcher version="2"><view name="Start"><group><tile AppID="AccuWeather.AccuWeatherforWindows8_8zz2pj9h1h1d8!App" size="wide310x150" FencePost="0"/><tile AppID="Microsoft.BingNews_8wekyb3d8bbwe!AppexNews"
size="wide310x150" FencePost="0"/><tile AppID="Microsoft.Windows.Desktop" size="wide310x150" FencePost="0"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\logoff.exe" size="square150x150"
FencePost="0"/></group><group name="Office Apps & Storage"><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\WINWORD.EXE" size="square150x150" FencePost="0"/><tile
AppID="Microsoft.SkyDrive.Desktop" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\EXCEL.EXE" size="square150x150" FencePost="0"/><tile
AppID="C27EB4BA.Dropbox_xbfy0k16fey96!App" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\POWERPNT.EXE" size="square150x150" FencePost="0"/><tile
AppID="F:\" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\MSPUB.EXE" size="square150x150" FencePost="0"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\calc.exe"
size="square70x70" FencePost="1"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\notepad.exe" size="square70x70" FencePost="0"/></group><group name="Mail & Calendar"><tile
AppID="microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail" size="square150x150" FencePost="0"/><tile AppID="microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Calendar"
size="square150x150" FencePost="0"/><tile AppID="10631PaolosAdventures.559711D6C5976_ntpp077zx3tm0!App" size="square150x150" FencePost="0"/><tile AppID="BRICKMAKERS.gmailcalendar_wps5hyj3streg!App"
size="square150x150" FencePost="0"/></group><group name="Internet & Social Media"><tile AppID="Facebook.Facebook_8xx8rvfyw5nnt!App" size="square70x70" FencePost="1"/><tile
AppID="9E2F88E3.Twitter_wgeqdkkx372wm!App" size="square70x70" FencePost="0"/><tile AppID="Microsoft.SkypeApp_kzf8qxf38zg5c!App" size="square70x70" FencePost="0"/><tile AppID="1168WindowsDexter.LinkedInHD_b3sam9s7hsbar!App"
size="square70x70" FencePost="0"/><tile AppID="19120CensoredUser.HyperforYouTube_c0tqyanwsgfn6!App" size="square150x150" FencePost="0"/><tile AppID="Microsoft.InternetExplorer.Default"
size="square150x150" FencePost="0"/><tile AppID="eBayInc.eBay_1618n3s9xq8tw!App" size="square150x150" FencePost="0"/></group></view></launcher>
Using GPO I then applied this layout to all users. However when I login as any other users I only actually get the OneDrive app and none of the others.
Can someone please point me in the right direction. The store can not be run as administrator and the 'Start Menu' user had administrator rights when the apps were added from the store.

Hi,
Thank you for posting in Windows Server Forum.
You can check the GPO setting “pin Apps to Start when installed” which will pin the new program to start and other setting “Start Screen Layout” which will lets you specify the Start screen layout for users and prevents them from changing
its configuration. You can find this setting under below mention path.
<Computer Configuration> | <User Configuration> \Administrative Templates\Start Menu and Taskbar
In addition please check beneath article.
Customize the Start Screen
http://technet.microsoft.com/en-us/library/jj134269.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Exchange Server 2013 In Windows Server 2012 - unable to logon EXchange Administrator Center (EAC)

Hi All,
I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
The Installations Success full but unable to load the EAC page by using the following URL
https://servername:port/owa/auth/logon.aspx
I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file
But the auth folder have the "logoff.aspx"
I installed many time freshly in separate WS-2012 but it not contains that logon.aspx
I want access the Exchange Administrator Center
Please Help me to solve it
IIS Exchange (Missing of logon.aspx)
SRKD0808

Hi All,
I sorted out this problem
Actually we have to run these 2 commands in Domain Control, But what i did I just run this
1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
it gone.
That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
you install first time
Because of this reason It is failing to run these 2 command
Finally what i did I just revert back my Domain control snapshot & Exchange server as well
Then i started freshly Installation in DC and Exchange server 2013 successfully installed
URL http://servername/ecp/default.aspx
Whole Process will be here
Exchange Server 2013 Step by Step Installation In Windows Server 2012
SRKD0808

On Windows Server 2012 R2 the "Show my desktop background on Start" is grayed out

Hi
As shown below, the new 8.1/2012R2 function "Show my desktop background on Start" is not available on Windows Server 2012 R2.
I have tried multiple solutions:
- Activate OS (In Win 8.1 - the feature is unavailable when Win8.1 is not activated)
- Install Desktop Experience
- Playing with the registry key "Subkey: HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Accent Entry:
MotionAccentId_v1.00
But no luck. Does anyone have a solution.
The reason why I need this is, that I am building a Remote Desktop solution, and here we want to give users the same experience as from their desktops.
Looking forward to some exciting feedback.
Regards,
Mr. Thomas

Hi,
I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Jeremy Wu
TechNet Community Support
Jeremy,
I, too, am facing this issue.
Do we have any update on this?
With regards
With regards

How to create Auto weakly backup in Windows Server 2012

Hello
1. I want to set auto backup in windows server 2012 Weakly.
2. can i Set auto backup like a normal data copy.

By configuring automatic backup, you can schedule this task according to your choice(weekly/monthly). You can use backup schedule wizard accessed from the Windows Server Backup user interface (Wbadmin.msc).
To schedule backup task by using powershell, please checkout this link :
http://technet.microsoft.com/en-us/library/dd759156.aspx
Also, have a look at here :
http://technet.microsoft.com/en-us/library/cc770757.aspx

Auto start a program without logon on Windows Server 2012

Similar Messages

Maybe you are looking for