Automate Process - Excel, and workflow for Pricing

Hi,
We want to automate the process (not necessary in SAP). Currently, the users are creating couple of Excel worksheets with landed cost, fob, duty, insurance etc to come up with Landed cost and calculate the Gross margin for each product. Once this is completed, they get the excel worksheet approve by their manager, Vice president before the pricing condition records are getting created in SAP.
We want to put this Excel Mechanism in some sort of technology where uesr can input the data and calculation can be done. They can save this as draft and revised it before submitting it for approval. On the press of certain button, the workflow should be called so that it goes to appropriate user for their approval and in the last, create the appropriate condition record in the SAP
Any one has implemented this type of mechanism, and if yes, which technology have you used. If not used, can you suggest the best technology to use.
Thanks

Similar Messages

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

Interview Questions and Answers for Pricing and Shipping Modules!!!!

Please let me know the Interview Questions and Answers for Pricing and Shipping Modules?

http://www.google.co.in/#hl=en&tbo=d&sclient=psy-ab&q=interview+questions+in+oracle+pricing+and+shipping&oq=interview+questions+in+oracle+pricing+and+shipping&gs_l=hp.3..33i21.1169.38878.0.39096.61.45.10.6.6.4.4004.21813.2-21j9j6j3j2j1j1j1.44.0.les%3B..0.0...1c.1.jEq3EQIj8vA&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1357700187,d.bmk&fp=cedcde5e8e6bc792&biw=1280&bih=619
HTH
Mahendra

Custom process code and FM for custom IDoc...

Hello Experts,
I created a custom IDoc based from ARTMAS05 IDoc. This is because we only need 3 segments and
the standard idoc(Artmas05) contains so many segments that we need.
Now, will I create a custom process code and FM for this? how do I go about this?
Thank you guys and take care!

Hello,
Here are the Steps that we need to be following while creating a Custom Process Code with Custom Function Module. ( Since the Segments to be handled are very Less, I am recommending that you go for a Custom Function Module).
1. Go to SE37 Create a Function Module. Please ensure to Create it with the IMPORT / EXPORT /TABLES parameters exactly in the way that they exist in any Standard SAP Inbound FM (Refer to IDOC_INPUT_ORDERS for example).
2. Once our FM is Ready (Need not be Complete with the Code to go ahead with the Process Code Creation) and Active, the next Step is to Create an Entry in the Transaction Code BD51 where we will register the Function Module.
3. Next, we'll have to go to T-Code WE57 where we'll have to make an entry for the Function Module with the IDoc Type & Message Type.
4. Finally, go to WE42 and Create a New Process Code and assign the Function Module and the Message Type.
NOTE 1 : The Process Code is, as we know, Client Dependent. So, once you create a Process Code, we need to have it migrated to the Testing Environment to Start & Carry Out Testing.
NOTE 2: If Step 2 & 3 are missing, then we'll not be able to assign the Function Module in WE42 while Creating Process Code.
Hope it was helpful.
Thanks and Regards,
Venkata Phani Prasad K

HT204053 Can I see Excel and Word for Mac documents on icloud?

Can I see Excel and Word for Mac documents on icloud?

No, I already have Microsoft Office for Mac on my macbook and on my imac. I want to share the documents from one (imac) to the other through Icloud. But it doesn't show them as an option. How do you share documents on one computer to the other within the same house?

Automatic TO creation and confirmation for a Material document

Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like   Auto TO = 1,
                                                                         AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total:   17, TO created:    0, Errors:   17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

Specs and workflow for creating opening/closing titles for video

I'm trying to create specs/workflow for videos that I will be adding opening and closing titles to (black background with colored text), using QuickTime Player 7 (Pro).
The videos are .mov, AVC coding, 1280x720, millions, 30fps, a sample video had a data rate of 7,463 kbits/second.
I created 1280x720 300dpi (perhaps I should have used 72dpi?), saved as a .jpg (highest quality), then copied the .jpg contents into a QuickTime Player 7 (Pro) blank document multiple times until I had enough frames for my need. The resultant video was very large; 339,743 kbps/second. I then exported to H.264, which brings the data rate down to only 214 kbits/second (and looks fine) and then copied that into the head of my AVC coding video.
Questions:
1) When I exported to H.264, the x pixels increased by 6, to 1286. After pasting that video into the AVC coding (1280x720) video, the resultant movie is 1280x720. Did my graphic get compressed by 6 pixels horizontally?
2) Does my method of converting the huge graphic movie to H.264, and then pasting it into the AVC coding make sense? The combined video has AVC coding, according to Movie Inspector; does the H.264 of the graphic get converted automatically? Any better way to approach creating my titles?
Note: these AVC coding videos may get converted to H.264 for some use, but for now, I'm keeping the highest quality (source) video I have to work with.
Thanks,
Bob

"First, tell use why you're not using FCP's titling and keying capabilities."
I don't own FCP.
"Then, explain why you're doing it this way."
I'm able to create graphics with plenty of control in a graphics program (PhotoShop in this case).
"There is no dpi in video, there are only pixels."
Sorry, I posted my thread then realized I left out a bit of info, but couldn't edit the post. I should have written that I created my graphics file in PhotoShop, hence the dpi reference.
"A black background for text is not the same as using an alpha channel."
OK. The portion of my video with titling stands by itself; that is, I'm not overlaying titles on existing video. Is there a use for alpha channel if I'm working up standalone title video frames? Uses less data rate?
It seems from your inference I would be best served by purchasing FCP, so I'll probably take that advice and buy it.
From a general video production point of view, I'd still like to learn more about creating titles in a graphics app and bringing them into QT Player; what format to bring them in as (e.g., H.264 into an AVC coding video, as I've done, or ?), and what happens when my graphics video gets converted from 1280x720 to 1286x780 (AVC export to H.264), and then brought into an AVC codec movie, and the movie remains at 1280x720-- does the graphic get horizontally widened, or the vertical compressed? Thanks.
Bob

BPM and Workflow for SRM 7

Hi
Does anyone know if BPM (Business Process Management) supports SRM and specifically SRM 7.0?
Is it possible to create the workflow in BPM and then transfer it to SRM 7? Will that work flow be a "developed" workflow from SRM point of view?
Sincerely
Anders

Hi,
In that case, I would use BPM for MDM and SRM workflow for SRM document approval.
For SRM ESOA, please visit ES Workplace.
http://www.sdn.sap.com/irj/sdn/esworkplace
http://esoadocu.sap.com/socoview/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=9E7765056D1C49FF9F433B406D1C70DD
Regards,
Masa

Do new Imacs come with Microsoft Excel and Word for Mac installed?

Or do I have to order it in the options when I go to get a new Imac? I use Excel and Word spreadsheets. Thanks.

No.
You would have to purchase these separately through either the Mac App Store, Microsoft or through a third party software sales vendor.
OR you can purchase through the Mac App Store iWork suite of apps that includes Pages (word processor/page layout app) Numbers ( spreadsheet app) and Keynote ( slide and audio/video presentation software).

Process Flow and Workflow

Hi experts, does a process flow cannot be used if we dont have oracle workflow?
If yes, any of you know the alternative ways to run a schedule mapping sequentially?
Currently i am running schedule from OWB (Control center manager). And i am not satisfied because the lack of Log / information regarding the job execution. Is there a way to get more detail schedule job logs???
Thank you in advance guys...

Oracle is pretty smart when it comes to those things, Im sure the table is not lock because one session is DML:ing it and one is querying it. You can get a deadlock when the sessions are trying to DML for the same row, because update/insert/delete is based on row lock, not table lock.
What you can do to test these kinds of long operation mappings is to generete the intermediate code from the map - open the map editor and click on genereate - choose intermediate from the dropdown list and click on your target table. Copy that code and run it from i.e toad, do the same thing instantly for the other map and you will found out if your sessions are locking each other.
Because the owb map is bascly configured in a way that it most of it is unnecessery when your are not running it thrue the repository, like I said. Try to run it they way it is - else create a new one by the code generated in the intermediate mapping.
Cheers

Adobe cloud to save automatically actions, stuff and settings for example?

Hi!
I had a hard-disk error and had to reinstall everything and with that I lost my photoshop actions...
Can't adobe cloud save automatically / sync this kind of stuff and personalize settings for example?
Thanks!
Francisco

Hi Francisco, here are the details around sync settings and items that can be synced as of now: Photoshop Help | Sync settings using Adobe Creative Cloud
Thanks,
Atul Saini

How do I get .jpg's to automatically be read and write for everyone

When I save a photo in Photoshop CS6 v13, as a .jpg file, it automatically gives me read and write permission, but not others. This is a pain as I have to change it each time I want to send someone a photo. Anywhere I can make it happen automatically?

Thanks for responding JJMack. Im using OSX 10.8.4 Mac.
Ill just save it on my laptop in any old folder.

What is the best app to buy for word, excel, and PowerPoint, for my ipad2?

Hello, I have an ipad2, and was recently told it can do everything a laptop can, so with that said, I need a great app for word, excel, PowerPoint, adobe and electric on signing , please help.

As with beauty, best is in the eye of the beholder or user.
FaceBook has an app for iOS devices, but FaceBook has chosen not to provide an iPad optimized version for their app - not yet anyway. As with most other iPhone/iPod Touch compatible apps, FaceBook's app will work on the iPad but it isn't optimized for the iPad's larger screen. There are at least two 3rd party FaceBook apps that are optimized for the iPad.

How to change the comma and dot for Pricing

Dear All,
As per the requirement, we need to change the Comma as dot and dot as comma for all the condition type values.
Please let me know where we have to do this setting.
Also explain, what is the impact on FI after this change.
Regards,
Mullairaja

Hello,
I hope you are talking about decimal notation in User defaults. You may choose the options in transaction SU3->Defaults->Decimal Notation.
This is user-specific settings and there will not be any impact on applications.
Thanks,
Venu

To Read the processed subtotal and use for calculating tax.

Hi,
I calculated subtotal in REUSE_ALV_LIST_DISPLAY.
I got the subtotal.
After the subtotal i have a line to calculate the tax.
Now I want to read the subtotal and get the sum(calculated total) and use it to process the tax.
Thanks.
Farid.

TYPE-POOLS: slis.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv,
it_events TYPE slis_t_event,
wa_events TYPE slis_alv_event,
it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv,
it_list TYPE slis_t_listheader ,
l_layout TYPE slis_layout_alv,
wp_type type SLIS_PRINT_ALV,
tp_type type table of SLIS_PRINT_ALV.
TYPES: BEGIN OF ty_itab,
field2(10),
field1(10),
qty1(10),
qty2 type i,
qty3 TYPE i,
Total type i,
END OF ty_itab.
DATA: itab TYPE STANDARD TABLE OF ty_itab WITH HEADER LINE,
      wa type ty_itab,
itab1 TYPE slis_t_listheader.
START-OF-SELECTION.
CLEAR ITAB.
itab-field2 = 'FIRST'.
itab-field1 = 'FIRST'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
itab-field2 = ''.
itab-field1 = 'FIRST'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
itab-field2 = 'FIRST'.
itab-field1 = 'FIRST'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
itab-field2 = 'FIRST'.
itab-field1 = 'FIRST'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
itab-field2 = 'SECOND'.
itab-field1 = 'SECOND'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
itab-field2 = 'SECOND'.
itab-field1 = 'SECOND'.
itab-qty1 = '2'.
itab-qty2 = 1.
itab-qty3 = 5.
APPEND itab.
* wa-field1 = ''.
* wa-qty1 = 'TAX'.
* wa-qty2 = 5.
* wa-qty3 = ''.
* insert wa into table itab.
wa_fieldcat-fieldname = 'FIELD2'.
wa_fieldcat-seltext_m = 'field2'.
wa_fieldcat-no_out = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat .
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-seltext_m = 'field'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat .
wa_fieldcat-fieldname = 'QTY1'.
wa_fieldcat-seltext_m = 'QUNTITY1'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat .
wa_fieldcat-fieldname = 'QTY2'.
wa_fieldcat-seltext_m = 'QUANTITY2'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat .
wa_fieldcat-fieldname = 'QTY3'.
wa_fieldcat-seltext_m = 'QUANTITY3'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat .
REFRESH it_sort.
wa_sort-fieldname = 'FIELD1'.
* wa_sort-fieldname = 'FIELD2'.
wa_sort-up = 'X'.
* wa_sort-group = '*'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
wp_type-no_new_page = 'X'.
append wp_type to tp_type.
CLEAR wa_sort.
wa_sort-fieldname = 'QTY1'.
wa_sort-up = 'X'.
wa_sort-group = '*'.
* wa_sort-subtot = ' '.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
PERFORM get_events .
* l_layout-subtotals_text = 'Subtotal'.
* l_layout-totals_text = 'Total text'.
l_layout-no_totalline = 'X'.
l_layout-max_linesize = '5'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      it_fieldcat        = it_fieldcat
       I_SCREEN_END_LINE              = 3
      is_layout          = l_layout
      IS_PRINT = wp_type
      it_sort            = it_sort
      it_events          = it_events
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
ENDIF.
FORM get_events .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = it_events.
* READ TABLE it_events WITH KEY
* name = slis_ev_subtotal_text INTO wa_events.
* IF sy-subrc = 0.
*    MOVE 'SUBTOTALS_TEXT' TO wa_events-form.
*    MODIFY it_events FROM wa_events INDEX sy-tabix.
* ENDIF.
* CLEAR wa_events.
* READ TABLE it_events WITH KEY
*   name = slis_ev_top_of_page   INTO wa_events.
* IF sy-subrc = 0.
*    MOVE 'TOP_OF_PAGE' TO wa_events-form.
*    MODIFY it_events FROM wa_events INDEX sy-tabix.
* ENDIF.
READ TABLE it_events into wa_events WITH KEY name = 'BEFORE_LINE_OUTPUT'.
if sy-subrc = 0.
    wa_events-form = 'BEFORE_LINE_OUTPUT'.
    MODIFY it_events FROM wa_events TRANSPORTING form WHERE name = 'BEFORE_LINE_OUTPUT'.
ENDIF.
READ TABLE it_events into wa_events WITH KEY name = 'AFTER_LINE_OUTPUT'.
if sy-subrc = 0.
    wa_events-form = 'AFTER_LINE_OUTPUT'.
    MODIFY it_events FROM wa_events TRANSPORTING form WHERE name = 'AFTER_LINE_OUTPUT'.
ENDIF.
*read table it_events with key name = slis_ev_end_of_page into wa_events.
*IF sy-subrc eq 0.
* wa_events-form = 'END_OF_PAGE'.
*ENDIF.
ENDFORM. " GET_EVENTS
FORM before_line_output using p_c type slis_lineinfo.
if p_c-subtot = 'X'.
      itab-field1 = ''.
      itab-qty1 = 'TOTAL'.
endif.
ENDFORM.
FORM after_line_output using p_c type slis_lineinfo.
if p_c-subtot = 'X'.
      ULINE AT (p_c-LINSZ).        "Dynamic Line Size
    FORMAT COLOR COL_TOTAL ON. "Setting the color
    WRITE :/
      sy-vline,
      15 'Tax',
      13 sy-vline,
      24 sy-vline,
      35 sy-vline.
    POSITION P_C-LINSZ.
    WRITE: SY-VLINE.
    FORMAT COLOR OFF.
endif.
ENDFORM.

Automate Process - Excel, and workflow for Pricing

Similar Messages

Maybe you are looking for