Automatic creation of delivery(vl01n)

Hello,
I want to create a outbound / inbound delivery through t-code VL01N with reference to salesorder / repair order.
Please suggest me any BADI , BAPI of functional module..
tHANKS,
aNIL
Edited by: anilpat1 on Mar 31, 2009 4:03 PM

Hi Anil,
Please find the BAPI's by using which you can create delivery :
BAPI_INB_DELIVERY_CONFIRM_DEC --- > BAPI for inbound delivery ... BAPI_OUTB_DELIVERY_CONFIRM_DEC ---> BAPI for Outbound Delivery ...
Regards,
Vishnu .

Similar Messages

Automatic creation of delivery ,pgi and billing as soon as ordrer is creat

Hai gurus,
Can we do automatic creation of delivery,pgi and billing as soon as order is saved.
Plz explain ?
Thanks in Advance
sameer

Hi sameer,
unless the standard program is modified you cannot do auto pgi. However batch jobs can help creating a delivery afer sales order. But incase WM is implemented then we can for the required delivery movment types create an automatic transfer order and confirmation. This brings us closer to some extent in the task. Then schedule again a job that does PGI.
can you please however explain the business need for auto pgi. It helps us to learn something as well.
regards
sadhu kishore

Automatic creation of delivery for a PO

Hi,
We are in ECC 6.0. We have a requirement to automatically create delivery for a product based on PO.
Here is the scenario:
We have a sub contracting scenario where in material MAT1is made by breaking up MAT2. 1CAR of MAT1 is made from 2 CAR of MAT2 and packaged.
Now the requirement is when a when a Purchase order is created MAT1, we also manually create a delivery for MAT2s for the subcontractor to pickup the stock of MAT2 to make MAT1.
The requirement is when I create a PO for MAT1, the system should automatically create a delivery for MAT2. MAT2 is always in stock.
I hope my explanation is clear.
Can some body suggest me if there is a way to do this?
Thanks.

Hi,
I would try to build solution based on WF events related to PO creation. Once PO is created(saved in system), the event is being raised. Here you can build function where you check whether PO is for MAT1 -> if yes -> raise automatic delivery creation for MAT2 (two possibilities:
1. use bapi 2. batch imput).
for this, you have to have some WF knowledge.
hope it helps.
regards,
wojciech

Automatic creation of delivery and TO

Hi everyone,
can any body explain me process of creating delivery automatically with the delivery date and time from sales order. whether this auto creation of delivery also creates TO(transfer order). Here a batch job should run for every 2 hours automatically to create delivery. so which program should i run in the background and what are the process steps......also pls let me know how i can auto create TO for all the deliveries as soon as the delivery gets created.
........waiting for ur reply.....
thanks&regards

Hi;
For creating the deliveries automatically you can use the T.code VL04 in the b/g or run the program RV50SBT1 in the b/g every 2 hours. This can be done using T.code SM36, this is where you set up the job. Here you can specify the details and the timing.
For creating the TO's for the delivery, either you do it through the config setting or run a similar job in the b/g and TO's should be created automatically.
For some reason if you find deliveries are not created you may use V.22 and give the Log number(which you will get from the job log) and see the reasons for delivery bnot being created.
hope this helps.
Regards,
Mani.

Automatic creation of Delivery Notes in pick transaction

In the pick transaction, when you have a lot of lines with a lot of Delivery adresses, the button (Deliver) creates automatically all the Delivery notes.
That's fine but all the documents remains open until you add them manually in the system.
I have a customer who creates many hundreds delivery notes at the same time.
I wish a button (Create and Add) which automatically create and add every Delivery Notes;
Christian

Hi sameer,
unless the standard program is modified you cannot do auto pgi. However batch jobs can help creating a delivery afer sales order. But incase WM is implemented then we can for the required delivery movment types create an automatic transfer order and confirmation. This brings us closer to some extent in the task. Then schedule again a job that does PGI.
can you please however explain the business need for auto pgi. It helps us to learn something as well.
regards
sadhu kishore

Automatically creation of delivery group in the sales order

Hi Can u please tell me how do i create automatically delivery group in the sales order.

Hi,
You can maintain the complete delivery indicator in your Customer Master(Ship to Party ) record shipping tab(Partial deliveries).
As per SAP ,This indicator
Indicates whether a sales order must be delivered completely in a single delivery or whether the order can be partially delivered and completed over a number of deliveries.
There by it can form a Delivery group.
Have a Nice Day.
Regards,
Ravi

Deactivate the automatic Creation of Delivery after Sales Order is Posted

SD gurus,
When I am creating a Sales Order, after posting it I want to create the delivery for the same manually.
But the configuraion is so made that the delivery is automatically generated.
How do i go for it ?
Kindly help

Hi Mohanty,
I think the Immediate Delivery under Shipping for that order type may have value A or X, Clear that value.
1) Goto VOV8 tansaction.
2) Select the Sales order type (For eg: OR for standard order) and double click on that
3) Under Shipping tab, Set Immediate Delivery with Blank value
Plz reward points if it is helpful
Thanks,
Vinay

Automatic TO creation for delivery

Dear Experts ,
We are facing a problem with Automatic TO creation for delivery only in some storage types ( not all the types , some types are working fine )
The problem happened after we applied a user exit for a specific picking strategy , but even after we have cancelled that user exit still problem remained.
We have checked the following settings, and everything seems fine:
1-Warehouse management - Activities u2013 transfers u2013 define Mvt type
2-Warehouse management u2013 interfaces- Automatic TO creation
Looking for your help in this issue
Thanks ,
Malik

Hi Malik,
You mentioned that you have previously implemented the picking user-exit and removed it later. Did you enter the correct picking strategy for the effected storage types after removing the user-exit? This could be one reason.
What happens when you try to create the TO manually?
Regards,
Osman

Automatic creation of Transfer Order when a delivery is created

Hi all ,
I wanted to have Automatic creation of Transfer Order when a delivery is created ,
what are the configuration activities that needs to be carried out .
Thanks ,
KSR

Dear Friends,
I am also facing the same problem; I want the system to create a transfer order at the time of creation of an outbound delivery.
I have done customization as under:
Step 001
Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries > Maintain Output Determination Procedure
Step 002
On the screen, u201CProcedureu201D: Overview, choose the following:
Procedure     Description
V10000     Header Output
Step 003
On the screen, u201CControl datau201D: Overview, enter the following:
Usage     Application     Procedure     Step number
B     V2                     V10000     110
Counter     Condition Type     Requirement     Description
01     WMTA                     032                     Automatic TA
The system does not create a transfer order automatically.
May I request our learned friends to guide me?

Error during creation of delivery challan (VL01N) for batch

Hi,
At the creation of delivery challan during batch determination the system displays the message 'The material is not handled in batch'. Although we have despatched this material considering batch determination previously with all customisation.
Kindly revert back as soon as possible.
Regards,
Goraksh.

Hi Goraksh,
I think somebody removed the check box of "Batch" from material master.
Please check and revert.
Regards,
MT
Edited by: M T on Apr 29, 2010 4:28 PM

Serial number assignment while delivery (VL01n)

Hi folks,
i am getting raw materials with serial numbers from my vendor.after this raw material converted to finish good, i have to deliver these finish goods with same serial number to my vendor.
1)can i assign these serial numbers to material while doing GR?
2)if i assigned the above, then while doing delivery (vl01n), these serial numbers will come to delivery automatically or not?
3)i can upload these material with serial numbers to IQ01
by BDC.then i want these serial numbers to transfer to delivery while doing vl01n.
       i think i have to use user-exit for this VL01n or VL02n. can u plz suggest me which user-exit i should use?
what is the way i need to follow to get the serial no.s in my delivery?i do not want manually entry.i do not serialized entry done by sap.it is very urgent.
any idea is appreaciated
Thanks in advance
Regards
pabitra

Following is list of all user exit for VL01N/Vl02N. See if by description it can by decided which user exit to use..else..you will have to put some break point to check where proper code can be written..
Exit Name Description
V02V0001 - Sales area determination for stock transport order
V02V0002 - User exit for storage location determination
V02V0003 - User exit for gate + matl staging area determination (headr)
V02V0004 - User Exit for Staging Area Determination (Item)
V50PSTAT - Delivery: Item Status Calculation
V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
V50R0001 - Collective processing for delivery creation
V50R0002 - Collective processing for delivery creation
V50R0004 - Calculation of Stock for POs for Shipping Due Date List
V50S0001 - User Exits for Delivery Processing
V53C0001 - Rough workload calculation in time per item
V53C0002 - W&S: RWE enhancement - shipping material type/time slot
V53W0001 - User exits for creating picking waves
VMDE0001 - Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 - Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 - Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 - Shipping Interface: Message SDPACK (Packing, Inbound)
V02V0001 - Sales area determination for stock transport order
V02V0002 - User exit for storage location determination
V02V0003 - User exit for gate + matl staging area determination (headr
V02V0004 - User Exit for Staging Area Determination (Item)
V50PSTAT - Delivery: Item Status Calculation
V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
V50R0001 - Collective processing for delivery creation
V50R0002 - Collective processing for delivery creation
V50R0004 - Calculation of Stock for POs for Shipping Due Date List
V50S0001 - User Exits for Delivery Processing
V53C0001 - Rough workload calculation in time per item
V53C0002 - W&S: RWE enhancement - shipping material type/time slot
V53W0001 - User exits for creating picking waves
VMDE0001 - Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 - Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 - Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 - Shipping Interface: Message SDPACK (Packing, Inbound)

Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

Hello,
We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
Can someone throw more light on the customizing/BADI/enhancements etc required??
Thanks and Regards..

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

Automatic creation of Transfer order for Picking and putaway

Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
Rahul

Hi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore

Automatic creation of debit or credit memo

Hi All,
I have a requirement of automatic creation of credit note with reference to sales order when i click save at transaction VF01 after generating billing document against delivery number.
I used the include ZXVVFU08 it is triggered when the save button is pressed in VF01. i have wriiten BDC code in this include. At the point when i click save, the billing number is getting generated but credit memo is not getting generate.It is giving an error 'No billing documents were generated'
How do i ensure that the invoice number is already saved before the BDC starts?
Need help. Thank you!

Dear seetharamsapsd ,
Create a new document type for both credit memo and debit memo requests.
Copy control to the respective credit memo and debit memo should be there.
Pricing procedure should contain provision to map the difference amount.
Create a Z program recording a BDC for the creation of Debit and credit memo request.
It is better to keep have only one Z program.
In the program write a logic to check the price change comparing the values of previous month created orders and
this months condition record values.
Based on whether there is increase or decrease , system should run the respective BDC for the debit or credit memo request.
This program can be set in background maybe at midnight.
Also save VF04 as a background job (so that the debit / credit memos as also created automatically)
Set this VF04 background job to run after say 1 or 2 hours from the time our Z program is running.
I hope you know the different tables/fields from where you can get the desired condition to run the program.
Thanks & Regards,
Hegal K Charles

Stop Automatic Creation of Inspection Lot for a condition

Dear Gurus,
While Creating a Delivery through a Sales Order, Config is maintained such that "Inspection Lot" will be automatically Generated.
Now Business wants to Stop this Automatic Creation of Inspection Lot only for a Particular Delivery Type and for a particular mode of Transport.
Do we have any User Exits / BADIs to achieve this requirement.
Please let us know.
Thanks in advance.
Regards,
Vinay Mutt

Hi
To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
regards
Manish

Automatic creation of delivery(vl01n)

Similar Messages

Maybe you are looking for