Automatic update sequence files

Hi all,
we have a simple step type, which will be usen in some hundreds of small sequence files.
We have changed the step type, as we added some variables, and in the Specify Module dialog we have defined the variabla-table new.
Now we want to update all the sequence files automatic. In the "Tools menu -> Update sequence files" there is a possibility, but it adds only the new variables to each instance of the step type, and doesn´t update the table, which we changed in the Specify Module tabe in the step type editor. If we open the updated file again, and go to Specify Module on an instance of the step type, we get the message "The prototype of the VI changed. The parameter information wil be updated to reflect the new prototype."
But the changes, what we have done in the Step Type editor, are not done to the instance.
The question is: how to update the step types?
regards
MB

Best way ist search for StepTypes Parameter in whole sequence (file(s)) and then set it explicit e.g. with Statement (see Screenshot)
RunState.Sequence.Main["Action"].TS.SData.ViCall.Parms
e.g. RunState.Sequence.Main["Action"].TS.SData.ViCall.Parms["Sequence Context"].ArgVal="Locals.Test123"
Attachments:
TSstatementTypes.doc ‏152 KB

Similar Messages

After an automatic update my files are gone. How do I get them back?

after an automatic update my files are gone. How do I get them back?
Working on a Mac Book Pro OS 10.7.3
Missing files: pictures, photos, documents (written files)
All in the map documents; aliases on the desktop
The desktop was rebuild too, not the same anymore and all aliases gone.

I suspect you didn't back up your data before the update - that would have been your first insurance. At the least, you could have saved your most important documents. I realize you probably don't want to hear that, but it's a good way to avoid problems.
It would be great to get a few answers:
1. What did you update? Was it a software update, a firmware update, or something else?
2. Do you use external drives? Or is it just the HD on your MBP?
3. Why did you "rebuild" the desktop?
Provide as much detail as you can.

After an automatic update my files are gone. How do Iget them back?

after an automatic update my files are gone. How do I get them back?

Do you know the name of any of the files you are looking for? Do you have a Time Machine backup? Can you search (using spotlight) for any of these files?
Any chance they were in the trash when you started the update? Any chance they were on an external drive which is NOT plugged in at this time?

Polling for database updates fails to update sequence file/table

I have a small system to poll for changes to a database table of student details. It consists of:
Database adapter, which polls the database for changes, retreives a changed row, and passes the generated XML to -
"receive" router service, which simply passes the retrieved database XML data to -
"execute" router service, which transforms the XML and passes the new message to -
File Adapter, which writes the transformed XML to a file.
The problem is that the database polling is not updating the sequence recorder - I have tried using a sequence file which stores the personnumber, a sequence table which stores the personnumber and a sequence table which stores the last-updated timestamp. In all cases the database adapter successfully reads the sequence file/table and retreives the correct row, based on the sequence value ( I have tested this by manually changing the sequence value), the data is transformed and a correct xml file is created, but the system then fails to update the sequence file/table so that when the next polling time comes around the very same database row is extracted again and again and again.
In the ESB control panel I have one error: "Response payload for operation "receive" is invalid!"
The Trace is:
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: Response payload for operation "receive" is invalid! at oracle.tip.esb.server.service.EsbRouterSubscription.processEventResponse(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(Unknown Source) at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281) at oracle.tip.adapter.db.InboundWork.onMessageImpl(InboundWork.java:1381) at oracle.tip.adapter.db.InboundWork.onMessage(InboundWork.java:1291) at oracle.tip.adapter.db.InboundWork.transactionalUnit(InboundWork.java:1262) at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:501) at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:401) at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819) at java.lang.Thread.run(Thread.java:595)
The payload is:
<PersonCollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/ISSSimIN">
<Person>
<name>Bob</name>
<surname>Stupid</surname>
<istatus>2</istatus>
<active>Active</active>
<personnumber>3001</personnumber>
<role>Staff</role>
<organization>TEX</organization>
<updateTimestamp>2007-11-29T14:06:55.000+00:00</updateTimestamp>
</Person>
</PersonCollection>
The payload above is the XML output from the Database adapter, the xsd for which was autogenerated by JDeveloper, so I don't understand how it can be invalid.
I have only been working with ESB for 3 days, but half of that time has now been spent stuck on this issue. Anyone got any ideas??
Richard

You need to be careful. Submit and committing to the database are two different things.
Submit on a page (and autoSubmit the property) are only posting the changes you typed into the field, back down to the application server. NOTHING is happening with the database at this point. So the applications's internal "cache" of records (using something like ADF BC) is holding the changes but the database doesn't know anything. So if you quit now, no changes will go to the database.
These changes onlyget submitted down to the app server when you do some sort of action like press a button. Simply navigating fields will be doing nothing back to the app server. If you add autoSubmit then you will automatically submit the changes on that field down to the app server when you leave the field (but again, this is not touching the database)
You have to explicitly add a COMMIT operation to save those changes to the database.
Maybe if you try in a simple EMP example and send us your findings we can help direct you further.
Regards
Grant

Automatically backup sequence file on open

Is it possible to write a callback that saves a copy of a sequence file to a given location
upon opening? Optionally, a second callback could check upon closing whether any changes
were made to the original and, if not, delete the copy.
I would like the callback to be general to the station, not just a single sequence file.
What about the Sequence Editor Option, Backup Sequence Files when Resaving it in Older
or Newer Format? I haven't figured it out. Please advice.
Regards,
Stefan
Message Edited by Vedeja on 01-25-2006 11:45 PM

For an individual sequence file, you can use the SequenceFileLoad and SequenceFileUnload callbacks to execute some code. This code can make a copy of the file and return it to the original state if needed.
Allen P.
NI
Message Edited by AllenP on 02-01-2006 05:28 PM

How do I automatically update/distribut files to multiple machines at once?

We use Vectorworks (CAD software) in my office and it includes, within its own application folder, a library of objects and templates.
What I'd like to be able to do is update the files within this folder on each machine at the click of the button, preferably using my own machine as a master.
Any ideas on how achieve this?
We're running Mac OS X 10.4 on all machines (about a dozen) and have a server running Mac OS X Server 10.4. We also have Apple Remote Desktop.

You can update file(s) on multiple machines using Apple Remote Desktop. Create a list (File > New List) and add the machines you want to update. Then use the "Copy" tool (Manage > Copy Items) to distribute the updated files from your machine to the target machines. There are several options for "Copy" and it depends on which version of ARD you're running.

Update All Sequence files automatically (Types)

We have a very large number of sequence files that need to be updated. The "Types" have changed.
Is there a way to have TestStand (2010 f1) update all the files in a Directory, or hopefully recursively?
What I'm used to doing is to check all the files out of our Version Control, select about 20 files at a time and open them in TestStand, Save them all and then close them, then do another set...
Is there a faster way? (I would expect to check them out of Version Control.)
Mike
Solved!
Go to Solution.

Take a look at the Sequence File Converter located at Tools >> Update Sequence Files
CTA, CLA, MTFBWY

How to revert changes made to sequence file dynamically

Problem synopsis:
1. TestUUTs entry point of custom process model, which is based on NI SequentialModel is being executed.
2. PreUUT step of process model set Execution.ClientFile according to serial number, provided by operator.
3. During sequence execution step module inserts additional steps into running sequence.
4. After first UUT loop iteration sequence contain all the original steps plus all the steps, which were added dynamically. This is exactly what I need.
5. Next UUT loop iteration is executing on updated sequence file. This is what I trying to prevent.
This design is serving following requirements:
a) dynamically load test sequence
b) dynamically add test results.
So my question is: how to implement this correctly?
I tried to release sequence file of previous iteration ("Engine.ReleaseSequenceFileEx") but it "SequenceFile.CanUnload==false" and "SequenceFile.IsExecuting==true".
But this happens during execution of PreUUT of process model. I think, at this point client sequence shall not be executing.
Steps 2. and 3. (see above) are executed in dll written using MS VC++ 2005.
TestStand is 3.5.0.725
Help me please.
Thanks,
Misha

rishi_86 wrote:
i have created a jTable in netbeans6. The table model is DefaultTableModel.
i'm not understanding the concept of firecellupdate and other events listeners.
i want the changes i make to the table during runtime to be written into a Text file.
any help would be greatly appreciated.you need to add the TableModelListener to your table model.
for example:
model.addTableModelListener(new TableModelListener() {
            public void tableChanged(TableModelEvent e) {
                // TODO Auto-generated method stub
         });then, you need to put your custom business logic(saving data to a text file, etc) into the tableChanged method.
From TableModelEvent you can get all information about the model changes.

Automatically updating files on local testing Server

I'm using EasyPHP-5.3.5.0 as a testing server on my local machine (I've use EasyPHP for several years). I set up the Site Definition in DW8 using the testing server root folder (www) as the development area; however, this caused problems when I attempted to upload from within DW to the Remote (production) server. I then modified the Site Definition to use a local folder. other then the Testing Server folder, for development which solved the upload problem. Then in the Site Definition I setup the Testing Server using the "PHP MySQL" model with "Local/Network" access. The Testing Server folder was set to "C:\Program Files\EasyPHP-5.3.5.0\" and the "Refresh Testing file list automatically" box was checked. The URL prefex was set to "http://127.0.0.1:8888/" as defined in the EasyPHP instructions. My problem is that Dreamweaver is not updating the files on the testing server when I save a file in the development folder. The development folder and the Testing Server reside on the same computer. If I copy and paste a file to the testing server everything works fine. I would like the testing server files to be automatically updated when I save a file in the development folder which is what the Site Definition seems to indicate should happen. Any thoughts on what the problem is and how to fix it would be appreciated.

> UPS tools that will only accept POST data coming from an
https page
Oh - I see. I think this will be hard to do. You'd need to
get a local
certificate and all - not sure how to go about that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:ev39uo$pm3$[email protected]..
> Murray *ACE* wrote:
>> Why do you want to do this?
>>
>
> to test locally?... I've been able to test everything
locally so far on my
> virtual testing server, and thought it'd be nice if I
could test the
> shopping cart locally as well. But it uses third party
UPS tools that will
> only accept POST data coming from an https page.
> And yes, I'm pretty sure it's a stupid idea... But as I
said, maybe
> there's a trick I'm not aware of...
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
>
> An Ingenious WebSite Builder:
http://sitelander.com

When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

How do I enter text onto a PDF and have it automatically update in an Indesign file?

I am trying to enter text into an application form and then include the updated application into an extended indesign file. I would like to be able to change elements of the application, which would then automatically update in the Indesign file. I am having trouble doing this.

I received an application in PDF and want to fill it out with my personal text, but I would also like to include supplemental documents with the application and thus have placed the PDF and the other documents it into an Indesign file. If I were to change some portion of the personal text in the PDF, it would be great if it could automatically update in the Indesign file. How else would you suggest I go about doing this?
Thanks!

I'm running Windows 7 and iTunes and the other Apple programs wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system

I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

HT6114 Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop. I do not want it saved on the desktop

Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop. I do not want it saved on the desktop.

Download how? If you are downloading via Safari, see Safari Preferences, General.

Database Polling - Using Update a Sequence File - Not working

Hi All,
We need to use the Database Adapter Polling feature to poll a table for inserts and updates. In the database configuration page of "After Read" , we have used "Update a Sequencing File".
But the process is not being triggered. Any one has successfully tried this option.
Do we need to do any additional configurations ?
Please respond. Its urgent.
Thanks,
Sayama

If this is your first time working with the Property Loader I recommend the following steps:
- Save the Sequence File and go to Tools-> Import/Export Properties…
- Set the Data Location to be a File (You can change it later if you need to use a Database).
- Enter the file path.
- Select a File Format.
- Go to the Properties Tab and from the Available properties list (tree) select your global variable. The global variable should appear in the selected properties list.
- Click the Export Button.
- If you go back to the Source Destination File and click on View File you will notice that the file you selected was generated and that it has a special format.
You will identify the name of your variable under <File Globals> and the variable value under ‘Variable Value’.
Change the variable value to whatever value you want and save the file.
- Now, if you click the Import Button, the tool will get the value from the source file and set the edit-time copy of the sequence global variable to the value you entered in the file.
- Click the Done button and go and check the value of the sequence global variable. The value should be the value you entered in the file.

IWork apps not updating iCloud files automatically

My iWork apps (pages, keynote, numbers) on my MacBook Pro quit updating iCloud files automatically. Also the apps will not show files created or updated on my iPhone or iPad automatically. If I restart or shut down my MacBook Pro, then the iCloud files are updated at the launch of the iWork app. The iWork apps were updating the iCloud files antomatically until two days ago. I am looking for suggestions on how to get the automatic iCloud file update feature working again.

Yes I am using Mountian Lion. Automatic syncing was working great up to about 2 days ago. Then it just quit. I could turn the mac off and back on and it would sync, but still would not automatically. None of my troubleshooting tricks fixed the issue. Finally I reinstalled Mountian Lion and now the iWorks apps are syncing. I still don't the know the reason for the issue, but a complete start over solved the issue for now. Thanks for your comments.

Automatic update sequence files

Similar Messages

Maybe you are looking for