Azure WebJob - can it take parameters and can be it be created using a script
Hi,
I have seen videos on Azure Webjobs and the scenario there is that an exe is taken and transformed into an Azure Webjob. If the exe takes parameters, is it possible that the webjob take parameters?
Also, I see that the Azure webjob is being created through the Azure portal, is it possible to create it using a script on the fly?
Thanks
Hi
Azure webjobs scripts or programs can be one of the following types:
The following file types are accepted:
.cmd, .bat, .exe (using windows cmd)
.ps1 (using powershell)
.sh (using bash)
.php (using php)
.py (using python)
.js (using node)
.jar (using java)
you dont need to create them from Azure portal always. you can create your program in Visual studio and publish your code to Azure to be executed.
About the parameter, you can have scheduled webjobs which will trigger at certain time and then they can read from different resourced (database, azure service bus, file etc) and that can be considered as input I guess.
Regards
Aram
Similar Messages
-
Building & deploying cubes in OWB (can we do these by using XML scripts)
Hi Guys,
Building & deploying cubes in OWB (can we do these by using XML scripts).
Is it possible in OWB?
Please help me ASAP..Hi, i managed to work out a solution with my web host.
The problem was that they are using Apache to process all incoming http requests then only forwarding specific requests to tomcat.
So by entering the port number after the domain ie www.mydomain.com:8080/ the http request went directly to tomcat and was processed correctly.
Furthermore my web host configured apache so all requests go straight to tomcat so now the port number isn't even required and all is well with the world again!
except... navigating to different pages in my site does not update the url correctly.
For example the site loads index.jsp when entering www.mydomain.com/ but when navigating to another page (i.e. photo.jsp) the photo.jsp page loads ok but the url is updated to www.mydomain.com/faces/index.jsp which is not correct. When refreshing the photo.jsp page it reloads the index.jsp page because of the incorrect url.
any ideas... -
Can anyone help me create a relink script to simply open up the relink dialogue box?
Can anyone help me create a relink script to simply open up the relink dialogue box?
the "Relink" command uses the same dialog as the "Place" command, with the exception of having the "Replace" option checked...so, use Ctrl+Shift+P to bring up the Place dialog, select your new image then check the "Replace" check box.
if checking "Replace" with the mouse slows you down, after selecting your image, press "tab" key 3 times to switch focus to it, then press space bar to check it, then ok to place. -
How can we prevent back button using java script
how can we prevent back button using java script
Would be quicker for you to google for javaScript
javascript:window.history.forward(-1); -
Hi ,
I have installed Jdev using silent installation .
Now I have some apps already created I want to create a default domain and then deploy apps into that through ant or any script?
Can anyone help me on this?
Thanks and Regards,
Vivek PemawatWe still don't know what you want to archive with here.
Cvele_new_account got you a pointer on how to install the DefaultDomain.
Tip: if you want to know or see the exact command line jdev uses to install the DefaultDomain, open jdev and in the application server navigator right click on hte integrated server and select configure DefualtDomain. In the log window you see the command line with all parameters.
Timo -
Find and replace string in a file using batch script
I am writing a batch script to replace " ", with " ". The below code works but it prefixes each line with the line number and :.
It is the last part of the line that I am trying to replace.
E.g.
" ","BALANCE_SHEET ","ASSETS ","03","LEVEL_2 ",Asset Accounts," ",
To be replaced as
" ","BALANCE_SHEET ","ASSETS ","03","LEVEL_2 ",Asset Accounts," "
Code:
@echo off &setlocal
set "search=" ","
set "replace=" ""
set "textfile=Build_Accounts_Plan_Source.txt"
set "newfile=Build_Accounts_Plan_Source_new.txt"
(for /f "delims=" %%i in ('findstr /n "^" "%textfile%"') do (
set "line=%%i"
setlocal enabledelayedexpansion
set "line=!line:%search%=%replace%!"
echo(!line!
endlocal
))>"%newfile%"
type "%newfile%"
Output:
3:" ","BALANCE_SHEET ","ASSETS ","03","LEVEL_2 ",Asset Accounts," "
Regards,
Ragav.Did you retype the code or did you use copy/paste? Retyping is not a good idea.
You can do this to find the cause of the problem:
Run the modified code below.
Use notepad.exe to open the file TempVBS.vbs in your %temp% folder.
Mark & copy the code, then paste it into your reply.
@echo off
set "textfile=Build_Accounts_Plan_Source.txt"
set "newfile=Build_Accounts_Plan_Source_new.txt"
set Scr="%temp%\TempVBS.vbs"
( echo Set oFSO = CreateObject("Scripting.FileSystemObject"^)
echo Set oInput = oFSO.OpenTextFile(WScript.Arguments(0^), 1^)
echo sData = Replace(oInput.ReadAll, "," ^& VbCrLf, VbCrLf^)
echo Set oOutput = oFSO.CreateTextFile(WScript.Arguments(1^), True^)
echo oOutput.Write sData
echo oInput.Close
echo oOutput.Close) > %Scr%
cscript //nologo %Scr% %textfile% %newfile% -
Hello, new here and looking for suggestions on creating a conf script
Hi,
The current project that I am working on would like to make a java display window to be fully customizable from a conf script.
the java display window has 10 fields or so, which are updated every second. the java object passes to JNI, gets populated by C++ data, and returns back to java for display.
Now, how is one able to create a script that can modify that java window to display only certain fields, lets say 1-5.?
suggestions, or know of an area that i can look into?
thanksFirst you may want to google »photoshop tutorial distresssed«.
As for combining images like that a combination of Blend If-settings (one can split the handles by alt-click-dragging them)), Layer Groups set to Blend Modes other than Pass Through and Grtadient Maps may be employed to maintain high editability.
One could also just use the images as Layer Masks for Solid Color Layers (and use Levels or Curves to get the intended contrast), though. -
How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.
Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy -
How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?
here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/ -
My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.
Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed. -
Can I validate input parameters and throw a message to user that parameters are invalid?
Post Author: ak004
CA Forum: General
Hi,
I have a report that accepts input parameters. Can I do a front end validation for these parameters and throw a message to the user that the parameters are invalid? Will this work fin if I deply it in infoview?
ThanksI think I posted this on the wrong forum, I will repost this in the proper forum
-
How can I put report parameters and report on the same page?
I want to have a page that has user input (text fields, checkboxes, radio buttons, etc.) at the top of the page, with a submit button. When the user submits the page, I want the resulting report (returned from a query) to display below the input area.
With ASP or JSP I would write a page with a FORM at the top, with the ACTION submitting to the same page. If the ASP/JSP detects it was submitted (by looking at the request URL or form parameters), it queries the database and displays the report; otherwise it doesn't query the DB or show any report.
How would I do this with with portlets?
Thanks!<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Hui Zeng ([email protected]):
1. Create a form using the Appbuilder
2. build a report
3. create a dynamic page, in this page
call the form, then query the databse:
<oracle>
begin
portal30.wwa_app_module.new_instance(
p_moduleid=>1060253649);
end;
</oracle>
<p>
<oracle>
begin
scott.example_report.show(
p_arg_names=>portal30.wwv_standard_util.string_to_table('_show_header'),
p_arg_values=>portal30.wwv_standard_util.string_to_table('NO')
end;
</oracle>
4. expose this dynamic page as a portlet <HR></BLOCKQUOTE>
I tried the above, but it didn't work. The form was displayed, but I couldn't find any way to make it go to the report. Is there something more that needs to be done? I'm new to Portal, so any help you can give me on entering parameters and passing them to a form (preferably on the same physical page) would be appreciated.
null -
When I take pics on my ipod touch it is using up a lot of memory...........my sister had the same one and can take way more pics. I tried restoring but still having memory problems...help
You are not connected to the internet. Try:
- Resetting the iPod
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powerng off and then back on your router
- Resetting network Settings: Setings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
Is Photoshop Elements the program where you take photos and can create a video
Is Photoshop Elements the program where you take photos and can create a video
Thank you
Jeffrey J. Zarnoch
DMBA Fellow CCA
Adjunct Professor/Philadelphia U
LEED Green Associate
Sent from my iPhone
Maybe you are looking for
-
IPod Classic will not turn on, refuses to go into disk mode.
Hello Apple Community. Last night I went out to a party, and while I was asleep, some questionable so-and-so poured alcohol on me, and this alcohol got all over my pants, and subsequently, the iPod. I am using a 160GB White iPod Classic, and I have n
-
How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?
-
Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?
-
Sharing N95 folders on WLAN and using WLAN to acce...
Hi all, Don't mean to seem like I'm abusing the help given here by taking too big a share... I was wondering how you get the above feature to work. I tried accessing the phone from a neworked PC and could ping it but not access folders on it. Also wh
-
Download error , why not any one respond here?
Hi I do like to much to evaluate SJSE 8 EA but after it comes available , all of my effort for downloading it happen to come to nothing more than an error message (very strange one). I submit to download center feedback , sun feedback program ... eve