B1if system requeriments.

Hi,
I have installed B1if in new servers and i don't have any problem.
Now, One company needs B1if to use Sap business One for ipad. The company has this sistem:
Intel xeon 3,2 Ghz and 3,5 Gb RAM, windows server 2003.
Is it enough? What are the recommended requirements to use B1if? What are the minimum requirements?
I have searched the forum and the sap web but have not found information.
Thanks,

Hi,
There is no specific requirement for using B1if to use Sap business One for ipad as long as the hardware is above the minimum requirement. The spec is well above the minimum.
However, it is depending on the actual size of the database and the average transaction frequencies. This various between all B1 users.
Thanks,
Gordon

Similar Messages

System Requeriments Cisco Works LMS 2.5

Hi
I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2
Thank?s

LMS 2.5.1 is supported with windows server 2003 SP1or later
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_upgrade_guides_chapter09186a00805af1dc.html#wp1032750

Export scenarios from XI and import them into PI

Dear experts
We are planning to upgrade our exitsting XI 3.0 to PI7.0.
Due to system requeriments, we need to install PI on new hardware and migrate all the existing scenario's from XI 3.0 PI7.'0
How to migrate the existing ABAP developements from XI to PI ?
It's possible to export scenarios from XI and import them into PI?
Thanks, in advance
Carme

Hi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick

Java 6, Woopra and Mac OS X 10.5

Hi people! i have a macbook, w/ 10.5.4 leopard and I need install Woopra ( www.woopra.com) but the system requeriments for that is Java 6 (still in beta)... but, when I tried to install Java 6, or the 5 version, said me that's impossible. *"This volume is not eligible for this update."*
anyone can help me please??? what must I do?

You already have Java 5 installed. If you need Java 6 you can download it from here.

Can I broadcast live video for 1000 users?

Hi:
Is possible, using Flash Media Server, broadcast live video
for 1000 users?,
how much bandwidth do I need?,
What system requeriment is need for this load (in linux)?,
What maximum video size and fps is possible to get?
regards,
Christian

You should have no problem serving a stream to 1000 users on
a single server (a dual xeon/2bg ram box ought to do it).
Your bandwidth requirements will depend on the bitrate of the
video stream. Multiply the stream bitrate by the number of users
(plus 1 for the publisher), and you'll get your bandwidth figure.
For example, if the video is published at 300kbps, you'll use
about 290mbps for your 1000 users.
For the video size, I wouldn't go much larger than 640x480.
The flashplayer doesn't use the video card to render video, and
redrawing the screen with a large video chews through lots of
processor cycles very quickly.

Migration Oracle BPM Engine

Hi everyone,
I am trying to migrate an existing Oracle BPM Enterprise instance installation (Service Directory and Process Execution Engine) to another physical machine (including its databases). I have already installed all system requeriments and I have created the Weblogic domain required, but when I try to configure the new instance, I do not clear about the how to restore de service directory and engine, because internally the service directory database saved local references to the engine and the current local machine. In addition, how must be migrate the engine to restore all instaces and relationships with the participants?
Anyone knows how do that or knows about a guide for this procedure.
Thanks in advance for your comments or any guide to me.
César

Have a look at this post. Oracle BPM 11g: Instance migration with the ant Script

HOW TO run SAPGUI into LINUX

HOW TO run SAPGUI into LINUX
Hi all,
I make this document for people who need install SAPGUI into Linux.
1)
Minimal system requeriments.
Linux
Hardware:
CPU: Intel PentiumIII with 800 MHz
RAM: 256MB
Software:
OS: SuSE Linux 9.3 - 10.1, Red Hat Enterprise Linux 3 and 4
JVM: Sun Java Runtime Evironment 1.4.2 (32-bit) or 5.0 (32-bit) including Java Plugin
please see http://java.sun.com/j2se/1.4.2/install-linux.html and http://java.sun.com/j2se/1.4.2/docs/...ocale.doc.html resp. http://java.sun.com/j2se/1.5.0/install-linux.html and http://java.sun.com/j2se/1.5.0/docs/...ocale.doc.html for details
2)
Download SAPGUI from:
ftp://ftp.sap.com/pub/sapgui/java/
(anonymous login)
https://websmp201.sap-ag.de/sapgui-java
(OSS user and pass)
3)
At /java folder in ftp select:
File: PlatinGUI-Linux-700.jar 37926 KB 11/07/06 13:58:00
(note: maybe a new version is available)
4)
At downloaded folder, execute
java -jar PlatinGUI-Linux-700.jar
5) Executing SAPGUI
A) Guilogon:
~/SAPClients/SAPGUI7.00/bin$ ./guilogon
To create servers, touch at new and go to "advanced".
-- tip use expert configuration
Example:
For server 10.1.1.6 with system number 01:
conn=/H/10.1.1.6/S/3201
B) Command line
For server 10.1.1.6 with system number 01:
~/SAPClients/SAPGUI7.00/bin$ ./sapgui /H/10.1.1.6/S/3201
Hope it helps, Goodbye!

Hi,
I'm trying to use the SAPgui for Java on Ubuntu 6.06 and I have problems with that. The SAPgui connects to the SAP system problemless.
After couple of minutes the SAPgui for Java always hangs with these messages in terminal:
ERROR #############################
17.08. 11:13:01.700 ERROR: JniAgComAdaptor.write failed
ERROR #############################
ERROR #############################
17.08. 11:13:01.714 ERROR: GuiNiWriter: write failed
ERROR #############################
I'm connecting to SAP Netweaver 04 running on the same computer. I have also tried different versions of Java 1.4, 1.5 and the problem still persists.
From other computers in network the SAPgui for Java runs perfectly against the same SAP system, running on the same Java version as before, on Ubuntu 6.06 or Fedora Core 5 whatever, it runs without any hassles.
I haven't found any remarks on this error on Google, neither on SAP OSS.
Do you think I can raise a question to OSS? I don't think there are some restrictions for SAPGUI for Java regarding use of Linux distribution.

B1if BizSteps that create new systems in SLD

Hi,
I want to create scenario that creates new updates system in SLD. I read in documentation that using B1if API new jobs can be added to JobCreator and JobExecutor. Is there any help or tutorial that shows how to create job step by step and use them to create, update or delete systems in SLD?
Regards
Szymon

As per my understand, when you create a new company, you have to undergo upgrade SAP Server procedure, at this time SDL of your new company is created.
IF you are talking about document like B1PO to B1SO, then you have to refer other document.
Thanks
Kevin

B1if - #sender system in for each processing loop

Hi all,
I am creating a scenario where I use the for each processing loop.
Everything works fine but when I want to use the #Sender system in various steps (call B1 atom eg), I get an error saying the #Sender system is empty.
Do I need to do something to get it populated inside the for each loop?
Kind regards,
Joeri

Hi Joeri,
I have done a test and I have the same problem you are having the system is empty when I use the #Sender System in a B1 call inside a for each. If I use a fix system id then it works fine.
<?xml version="1.0" encoding="utf-8" ?>
<Msg xmlns="urn:com.sap.b1i.vplatform:entity">
<Body>
    <Payload Role="C" id="atom3" system="empty">
      <B1CallResult status="failure" b1login="Technical User" method="Synchronous Retrieval" objectid="4" payload="" keyname="ItemCode" keyvalue="A00001" />
    </Payload>
</Body>
</Msg>
Please open a message for support asking for it and share the information with us.
Hope it helps
Trinidad.
Edited by: Maria Trinidad MARTINEZ GEA on Jan 6, 2012 11:00 AM
My previous answer was not related to your question...

B1iF File to Sales Order Scenario

Good day all,
Does anyone have scenario steps or templates to create the following scenario in B1iF:
- Incoming .txt file must be transformed using Regular Expressions
- Resulting file must be processed into a Sales Order in SAP Business One.
I have tried a simple scenario that picks up a .xml file and create a Business Partner in SAP Business One just to gain some understanding about how the scenario packages work, but, I'm afraid, without much success.
When I drop the file in the IN folder, it gets picked up, but is then filtered out with the following result message:
no scenario step (vBIU) associated for this step for the incoming system (SysId)
Any guidence to in this regard will be greatly appreciated.
Kind regards,
Rikard

Hi Experts
SAP Version = 8.81 Pl08
I need your help , after i upgraded my B1if framework to higher version i get this error as shown below( we don't have any customization) all is standard SAP packages.
The Error: Server Side cannot respond your request (no scenario step (vBIU) associated for this step for the incoming system (SYSID)[0009].
what has gone wrong.
Thank you best Regards
Dayal

B1 Item to B1 Item scenario on B1if 8.8

Hi there. I'm trying to develop a very simple task with b1if. My target is to get a B1 to B1 consolidation of Items. Any time a item is created or changed, it will be reflected in others sbo companies. So far, I've got a simple scenario with just one final atom transformation. If my final atom is like that:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:b1e="urn:com.sap.b1i.sim:b1event" xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:jdbc="urn:com.sap.b1i.adapter:jdbcadapter" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:utils2="com.sap.b1i.bpc_tools.Utilities" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" xmlns:xci="urn:com.sap.b1i.xcellerator:intdoc" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" bfa:force="" vpf:force="" jdbc:force="" rfc:force="" b1ie:force="" b1e:force="" xci:force="" sim:force="" utils2:force="">
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:param name="atom"/>
     <xsl:param name="sessionid"/>
     <xsl:variable name="msg" select="/vpf:Msg/vpf:Body/vpf:Payload[./@Role='S']"/>
     <xsl:variable name="vpSender" select="/vpf:Msg/vpf:Header/vpf:Sender/@Id"/>
     <xsl:variable name="vpObject" select="/vpf:Msg/vpf:Header/vpf:Sender/@ObjId"/>
     <xsl:variable name="vpReceiver" select="/vpf:Msg/vpf:Header/vpf:ReceiverList/vpf:Receiver[./@handover='P']/@Id"/>
     <xsl:template match="/">
          <Msg xmlns="urn:com.sap.b1i.vplatform:entity">
               <xsl:copy-of select="/vpf:Msg/@*"/>
               <xsl:copy-of select="/vpf:Msg/vpf:Header"/>
               <Body>
                    <xsl:copy-of select="/vpf:Msg/vpf:Body/*"/>
                    <Payload Role="R" id="{$atom}">
                         <xsl:call-template name="transform"/>
                    </Payload>
               </Body>
          </Msg>
     </xsl:template>
     <xsl:template name="transform">
          <xsl:attribute name="pltype">xml</xsl:attribute>
          <BOM>
               <BO>
                    <AdmInfo>
                         <Object>4</Object>
                    </AdmInfo>
                    <OITM>
                         <row>
                              <ItemCode>1551</ItemCode>
                              <ItemName>TEST</ItemName>
                              <ItmsGrpCod>113</ItmsGrpCod>
                              <VatGourpSa>R16</VatGourpSa>
                         </row>
                    </OITM>
               </BO>
          </BOM>
     </xsl:template>
</xsl:stylesheet>
With this atom, item test 1151 it is created properly. Problems come to me when I try to get data from the inbound process. Changing my xls file to the next way system gives an error ." Item no. is missing".
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:b1e="urn:com.sap.b1i.sim:b1event" xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:jdbc="urn:com.sap.b1i.adapter:jdbcadapter" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:utils2="com.sap.b1i.bpc_tools.Utilities" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" xmlns:xci="urn:com.sap.b1i.xcellerator:intdoc" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" bfa:force="" vpf:force="" jdbc:force="" rfc:force="" b1ie:force="" b1e:force="" xci:force="" sim:force="" utils2:force="">
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:param name="atom"/>
     <xsl:param name="sessionid"/>
     <xsl:variable name="msg" select="/vpf:Msg/vpf:Body/vpf:Payload[./@Role='S']"/>
     <xsl:variable name="vpSender" select="/vpf:Msg/vpf:Header/vpf:Sender/@Id"/>
     <xsl:variable name="vpObject" select="/vpf:Msg/vpf:Header/vpf:Sender/@ObjId"/>
     <xsl:variable name="vpReceiver" select="/vpf:Msg/vpf:Header/vpf:ReceiverList/vpf:Receiver[./@handover='P']/@Id"/>
     <xsl:template match="/">
          <Msg xmlns="urn:com.sap.b1i.vplatform:entity">
               <xsl:copy-of select="/vpf:Msg/@*"/>
               <xsl:copy-of select="/vpf:Msg/vpf:Header"/>
               <Body>
                    <xsl:copy-of select="/vpf:Msg/vpf:Body/*"/>
                    <Payload Role="R" id="{$atom}">
                         <xsl:call-template name="transform"/>
                    </Payload>
               </Body>
          </Msg>
     </xsl:template>
     <xsl:template name="transform">
          <xsl:attribute name="pltype">xml</xsl:attribute>
          <BOM>
               <BO>
                    <AdmInfo>
                         <Object>4</Object>
                    </AdmInfo>
                    <OITM>
                         <row>
                              <ItemCode><xsl:value-of select = "$msg/BOM/BO/OITM/row/ItemCode"/></ItemCode>
                              <ItemName><xsl:value-of select = "$msg/BOM/BO/OITM/row/ItemName"/></ItemName>
                              <ItmsGrpCod><xsl:value-of select = "$msg/BOM/BO/OITM/row/ItmsGrpCod"/></ItmsGrpCod>
                              <VatGourpSa><xsl:value-of select = "$msg/BOM/BO/OITM/row/VatGourpSa"/></VatGourpSa>
                              </row>
                    </OITM>
               </BO>
          </BOM>
     </xsl:template>
</xsl:stylesheet>
Does anyone knows how to get this code working? I don't know what is wrong. This is a simple task and I'm tracked!
Thanks so much.

Hello Jose,
This is not quite correct. I correct it for you.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:b1e="urn:com.sap.b1i.sim:b1event" xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:jdbc="urn:com.sap.b1i.adapter:jdbcadapter" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:utils2="com.sap.b1i.bpc_tools.Utilities" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" xmlns:xci="urn:com.sap.b1i.xcellerator:intdoc" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" bfa:force="" vpf:force="" jdbc:force="" rfc:force="" b1ie:force="" b1e:force="" xci:force="" sim:force="" utils2:force="">
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:param name="atom"/>
     <xsl:param name="sessionid"/>
     <xsl:variable name="msg" select="/vpf:Msg/vpf:Body/vpf:Payload[./@Role='S']"/>
     <xsl:variable name="vpSender" select="/vpf:Msg/vpf:Header/vpf:Sender/@Id"/>
     <xsl:variable name="vpObject" select="/vpf:Msg/vpf:Header/vpf:Sender/@ObjId"/>
     <xsl:variable name="vpReceiver" select="/vpf:Msg/vpf:Header/vpf:ReceiverList/vpf:Receiver[./@handover='P']/@Id"/>
     <xsl:template match="/">
          <Msg xmlns="urn:com.sap.b1i.vplatform:entity">
               <xsl:copy-of select="/vpf:Msg/@*"/>
               <xsl:copy-of select="/vpf:Msg/vpf:Header"/>
               <Body>
                    <xsl:copy-of select="/vpf:Msg/vpf:Body/*"/>
                    <Payload Role="R" id="{$atom}">
                         <xsl:call-template name="transform"/>
                    </Payload>
               </Body>
          </Msg>
     </xsl:template>
     <xsl:template name="transform">
          <xsl:attribute name="pltype">xml</xsl:attribute>
          <BOM xmlns="">
               <BO>
                    <AdmInfo>
                         <Object>4</Object>
                         <Version>2</Version>
                    </AdmInfo>
                    <QueryParams>
                         <ItemCode>
                              <xsl:value-of select="$msg/BOM/BO/Items/row/ItemCode"/>
                         </ItemCode>
                    </QueryParams>
                    <Items>
                         <row>
                              <ItemCode>
                                   <xsl:value-of select="$msg/BOM/BO/Items/row/ItemCode"/>
                              </ItemCode>
                              <ItemName>
                                   <xsl:value-of select="$msg/BOM/BO/Items/row/ItemName"/>
                              </ItemName>
                              <ItemsGroupCode>
                                   <xsl:value-of select="$msg/BOM/BO/Items/row/ItemsGroupCode"/>
                              </ItemsGroupCode>
                         </row>
                    </Items>
               </BO>
          </BOM>
     </xsl:template>
</xsl:stylesheet>
So it must be work.
Best regards,
Selina
Edited by: Rosenberger Selina on Nov 24, 2011 11:36 AM

My KT3 Ultra Experience (from the nightmare to a running well system)

Well First...
I don't speak a well english, maybe because still think in spanish, so maybe find many gramatical errors.
the very very begin
The history begins with a terrible electric shock in my house, i got a Athlon XP 1700+ with a cheap PC Chips Board (810)..yeah the all in one board (video, modem, ethernet, sound) build my first system with a mixture of expectatives and dreams with my first AMD athlon XP , the system running well, before got the "great idea" to plug a Zoltrix Genie TV card for record South Park, everything is OK, so, i think that i abuse the luck, and a rainy night, i surf the net ( a XXX one... ATK... never forget that site after this) a electric shock enter trought the tv cable searching ground, someone that got this experience maybe feels a demon in a box, a white light come out from the back of the system and hit the isolated regulator ( with the sparks and all the stuff ) the light goes out and a tasty barbecue smell fill completly the room.
ohhh...
the list of cooking components:
   Athlon XP 1700+
   PC Chips 810 (a/v/r/s)
   Maxtor HDD 40GB
   Zoltrix Genie TV
   Mouse (generic)
   Keyboard (generic)
   Microsoft sidewinder gamepad
The miracle pieces:
   256MB DIMM sticks from crucial (PC 100) two of them
   External CD Burner HP CD-Writer 8230e (USB)
   Philips Monitor 17'
i learn to never watch a porno site in a rainy night... it's really bad for your system
build another system "da plan!"
in a trip to Bogotá i search in the computer mall called UNILAGO, the new system board, someone callit MOBO, my idea are this:
A Boxed Board. Candidates like ASUS , Gygabyte, MSI, with the VIA 333 chip are required.
we search in all the place, asus show its A7V333 model, but its too expensive in the price that this guy offered (maybe think that i don't search the pricewatch.com page before go to the mall... je je) in a place some guy show me a very nice box... i think the first impression counts, its the kt3 ultra board in her shiny box, next tactic ask for minimun price (...no minimun price got this board...) so i pay 360 thousand pesos for it.
wen come back to Cali ( the place i live) and after got some pesos in my bag i go to the computer mall in Cali called La passarella (remember the argentinian soccer player?) for buy the components.....
the list is this:
   Athlon XP 1800+ BOXED (got the original AMD heatsink)
   DDR RAM PC2100 256 MB
   Genius Netscroll Optic
   Genius Keyboard
   CD-Rom LG 52 X
   Case with a 300W ATX Power Supply
   Realtek Ethernet Card (Encore)
   AGP Video card with the SIS chip 315 128MB of ram
   Genius Maxfire USB (i buyit for the cheap price and anyway i don't play too much in a computer so i dont need a Nvidia Ti thing or a gamepad expensive)
wen go to the house, plug all the stuff and the process it's fine, no complicate things occur, i do two modifications first
1)to the AMD heatsink, the clip come in the other side, so i need to unplug the Power ATX supply for attach it and don't want to do the same thing every time that retire the heatsink, i disarm the heatsink and turn the clip to the other side, no problems with this mod...
2)i don't use floppy disks... I HATE IT so the place of the floppy converts in the place for the D-Bracket with all the lights and two USB... nice because i perfored the case in the right way and the usb and the lights come in the front of the case...it's a easy mod...
all the things come well so turn it ON...
KT3 Ultra first Round!
well i don' pay much attention in the first time that power on the system and hit the del key.... nothing happens and a letters of searching array and scanning devices show... after this process the amibios screen shows (the blue one, and still today don't find the option for change the color scheme like te PC Chips amibios options got) in this point i know that the rule "search the instruction booklet" it's totally necessary for many options the options that i disable and some that enable are this:
    in integrated peripherals disable the ata raid option (remember the scan devices screen?) i plug a maxtor ATA 100 hard drive to the ide cable because don't know if this hard disk works with the Raid Option maybe not because is ata 100.. so disable the option
    in power management options i activate the CPU critical temperature to 70°C
    in advanced bios settings i enable the MSI link to the future screen... nice, SMART for HDD enable. In the boot secuence put first CD-rom and later HDD
    in standard CMOS settings put the hour...(uh!), and obvious disable the nasty floppy drive (BOOT CDS REPLACE THE NEED OF FLOPPY DRIVES...)
    in PC health disable the intrussion option, because i don't have the switch for the case...
    in frecuency and voltage i find the FSB in 100Mhz but i don't change anything in this point...
after this tiny modification, i save the changes and restart....
the system boot with a CD he he... with a image of the win98 boot disk, so i formated and fdisk the drive... tooooo fast in this point.
after partition the HDD in 5 pieces and formating every partition, i reboot the computer for installing Win98...
the installation goes normal, and install all the MSI software (only for know what apps are appreciable por me) i don't have any problems, install all the drivers for every single hardware piece and the system works well... so testing es the next point.
KT3 Ultra first test after the installation
well i feel that my job are easyly...(ji ji) and all the process go OK so testing my new machine gotme like a child.
i run the test of SiS for the AGP card ( 3D thrill ) the demo of the card got a cosmic scene, comes very fast, i try to watch if someone piloting the space ship, and maybe see something
the sound are good for the include sound chip in the board, put and test all the effects and test...ok ok... nice.
microsoft direct X got some testings so i run it too ... write in run command "dxdiag" and ready for the tests, in this point i feel free to install a copy of "formula 1 2002" in the machine some guy borrowme a copy, wen i try to install got a n error.... (the first one) and the game don't install ... i reject the installation and try another game, in this point i search the Athlon XP Oem.bmp file for branding my new system... je je, and hit the window key and pause and i find that my processor runs in 1.1 Mhz... (what!!!) if this CPU is a 1800 and this speed maybe is wrong....so i read the boocklet and find in the FSB option the way for put the CPU in his real Mhz...(1.53) in this point begins the troubles...
KT3 Ultra damage my CPU??????!!!!!
Wen enter to the bios i got direct for the FSB option and put it to 133Mhz maybe this thing it's easyly too, i think, i made and save the changes... and.....
A BLACK SCREEN COMES AND I SEE THE FOUR LEDS IN RED!!!!
AHHHH!, i thinks that this processor pases to a better life after this point, with shaking hands read again the boocklet and find the interpretation for the 4 red leds signal, damage or bad installed processor.
oh, so what i do...?
i continue reading for a little FAQ in the boocklet, and nothing, only a glossary, i call a friend to helpme... ( the true geek one) the guy tell me to reset the bios with the jumper... so, i don't loose anything with this and do it...
wen the computer reboots the signals come to life... (ufff!) and the scanning device creen shows again... so i need to save again my settings.
i do all the things and save, the system turns on and windows 98 load normal again... i try to fix the FSB thing in other time i think, and continue intalling some programs.
In my CDs find a copy of formula 1 2001 no de 2002 version, because this version i installed in my other fried system i installed in mine for show and prove the 3d card...
the installation works fine and terminate ok, wen i hit the icon to play, the 3d settings window appears i select some options 800x600 32bit color and press test, a blank screen comes with some little caracters, in some point wen the test come back my system frozes and nothing happens... OHHHHHHH! what happens?.... i think, i decided to check the temperature values because in this point think that my installation fails in the put heatsink process.
i load PC alert and find CPU temperature in 78°C... oh, it's too high i think so shutdown the system and check the heatsink for anything that miss in the first time.
i put again the heatsink an log to the bios for check the values....
this is the values of PChealth option in bios:
   Cpu temp : 71°C and stable in this value...it's high too
   System Temp : 38°C ...high too
   VCore      1.744V
   +5.0V       5.038V
   +12V      11.923V
   -12V      -11.497
   -5V         -5.026V
   Batt      3.24V
   +5VSB      4.969
some ideas come to my mind and try to think if some options of the bios, the best performance option it's a good point to start i think so i select and save the changes...
oh, oh, the black screen comes again.... buuuuuu! and the four red leds too....buuuu!
mmmm, ....what i do?, what i do?....i reset again the bios, for the options and try to boot the machine again... maybe leave the system in the first point i think but nothing prepare me for the many "chorro" of errors thath follow after this point....
If i can roll back the time....
i think to be superman and fly in a oposite earth direction for roll back the time... (luisa!)
the system begins a non stop errors secuence sometimes the four leds are red, sometimes tree leds red an the top right led green, in the book says this signal is for damage DDR ram...
wen windows 98 loads the system frozes in some points, and wen enter and run some test the system frozes too...
i reset the bios to the original form an try to leave the house excactly wen enter the first time... i save it and the errors continues...
with NO hope of correct by myself the issues i turn on my old K6II system and find the MSI forum that got some mysql errors
in the forum find the Power unit suplly issues, i got the ATX box and 300W maybe it's too low i think after MANY post with same errors like me, i think to made a program plan for recover the stability and my ideas come in the next point.
now need another message to continue....

Return the system to the "normal" or less stability
In the forum (thanks for the people thath participate) some people says issues of frozen systems because cheap ATX power supply, some other got problems with the heatsink, i think that a mixture of those issues gotme like mad and try to figure out the quality of a atx power supply that changes the performance after a bios setup... ( it's a very cheap ATX power supply, i think) the Power unit now don't support the energy, and power needs of the system in some cases wen i run the 3d accelerated test the system frozes wen i hit "test".
return today to the computer mall passarella, and buy this items:
   Vulcano 7 (it's a building no, it's a airplane no,... it's vulcano 7 with speed sensor incorporated, much bigger than a building and more CFM than any airplane make!)
   ATX power supply 400W for kicks power requeriments and maybe extract energy enough for a reading lamp...
   wen come back to the house i install the new parts, the vulcano 7 needs the same mod than the other AMD one, or maybe MSI put the sockect A protect clip layer in the wrong site, maybe the board fit well in a ATX-XL case for no uninstall the power unit to put the heatsink... anyway need to uninstallit but this issue it's funny.
wen everiting it's ok i turn on the system...
KT3 Ultra Runs smooth... FINALLY
i know thath every body needs to listen a couple of help tips, in this point i think that logged to the forum are the best idea that i got, many people got the same problems and if you don't ask or search you think thath the MSI board it's a terrible board, and this no true, and because it's red too.
the system loads normal and i think to go up the FSB to the NORMAL 133 value for this athlon XP 1800+ i change the values, save and reboot the first thing that i find are the bios recognize the Amd Athlon XP 1800+ in the first black screen ( wen disables da logo) later, web hit windows key+ pause the window says Athlon XP 1800+, in the fuzzy logic app i find the values of 1523 Mhz and the temperature don't rises 50°C it's now OK, better than the cooking eggs thing that got before the changes.
now i need to give some thanks..
Thanks
to all the people in the forum, i don't write a nice english but i know read and it's enough for take a easy living style with this machines...
MSI people thanks
for the people in the mall, they don't know much the Power unit issues of this board it's a bit more exigent than others in his point.
to my dog that share my angry in the late night, it's a good one that dont' sleep well wen i work in the night..
so to all the people thanks for made this posible, maybe this long post with less technical things works for put your boards well.
Victor Hugo Hernández
Cali - Colombia

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

B1if access via webdav fails

Hi,
when I try to access B1if-webdav with the internet explorer (http://127.0.0.1:8080/B1iXcellerator/exec/webdav) I get the following error:
SAP B1iP detected an error:
Emitted HTTP-Code
500 - Internal Server Error
Internal Reason
while trying to invoke the method com.sap.b1i.bizprocessor.BizStoreURI.isUniqueURI() of an object loaded from local variable 'buri'
Recommendation
Check for the correctness of your activity or environment or ask your system-administrator for further help.
Full Internal Error Message
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: java.lang.NullPointerException: .......
Last week it works and I don´t remember any changes. I already deinstalled the whole framework but the error remains the same.
Any idea?
Thanks
Gregor

Gregor,
Please check two issue fllowing:
1. Make sure the test connection to B1DI and JDBC is successful. Make sure there is no special char in the password
- Restart SAP Business One Integration Service from windows services and log in again to SAP Business One.
2.The address in the B1iServer name is incorrect
- Use the correct server address and ensure you replace <server_name> with the name or IP of your server not use localhost
you must edit file xcellerator.cfg set xcl.webdav=full. and then you use XMLSpy connect to "http://localhost:8080/B1iXcellerator/exec/dummy/" by B1iadmin user.
and check the note in address..
1619422 - B1ic_Troubleshooting Guide for B1ic Dashboard/Cockpit
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3136313934323226
Regards,
Marcelo Silva Santos

PS-Relationship between the system status in wbs elements and activities.

Relationship between the system status in wbs elements and activities.
We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
Thanks in advance.

Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha.

B1if system requeriments.

Similar Messages

Maybe you are looking for