B2B custom reports

I am going to be writing a custom report for my b2b messages and was looking at the b2b.B2B_INSTANCEMESSAGE table to build my reports off of. However, I notice that this table is cleared out every day or two. Is there a better table that I could build my reports on that doesn't get cleared out, and that contains the same data, or is there a way that I can set this table to not be emptied every couple days?
Thanks,

The DB object that you are using (B2B_INSTANCEMESSAGE) is actually a View rather than a Table. It is built using a number of underlying b2b tables. So it might be better to build out your custom reports on this view rather than the underlying tables.

Similar Messages

  • B2B Custom Inbound Document

    Hello All,
    I was trying the B2B Custom Inbound .... i am keeping a file in a folder..that file i want my trading partner NewPartner to pick up and send that to host MyCompany and i am using B2B adapter in my BPEL composite to receive the file and do some business logic. Now, the file is picked up, but is not getting to the composite...i mean no instances for my composite in EM. when i go to the reports tab in B2B console, it says agreement not found....
    The configuration I did in administration/Documents
    I defined Custom--->1.0---->PurchaseOrder----->PurchaseOrderDef
    And in the PurchaseOrder (Document Type) tab, in the ebMS Section, i have filled the following values...
    Action Name : PurchaseOrder
    Service Name : PurchaseOrder
    From Role : NewPartner
    To Role : MyCompany
    And in the definition tab, i have given the following values...
    xsd : Custom_PurchaseOrder.xsd
    Identification xpath expression : /*[local-name()='PurchaseOrder']
    In the listening channel of administration...
    i have created a channel with generic file 1.0 protocol...
    folder name: C:\Users\sunny\Desktop\B2BCustom
    file name format : NewPartner_12345.dat
    I haven't created any other channels for NewPartner and MyCompany Specifically....
    I have created an agreement for NewPartner , selected the document definition...and deployed the code..
    Now, when i keep the sample file NewPartner_12345.xml in the folder, it is getting picked up...but my composite is not receiving the file...
    In B2B console, in the reports tab...the error message says like below...
    Machine Info: Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUND.
    Error Level     ERROR_LEVEL_COLLABORATION
    Error Severity     ERROR
    Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUND
    Please help me fix this...
    Thanks a lot in advance...

    Please post all B2B related questions in Oracle B2B forum -
    Integration - B2B
    Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUNDMake sure that your remote TP's name is exactly what you are providing as part of file name - "NewPartner". You should also be able to see the name in the agreement you created.
    Regards,
    Anuj

  • Custom report to track the documents

    Hai All,
    My Client requires a custom report to track the document flow any time i.e., once the material arrives the purchase dept makes an entry like PO date the date of arrival,and Gr date the GR approval date and document handed over for  Invoice verification date and payment made date.
    How is achieve this?
    Regards
    R.Senthilnambi

    No My client requirement is not like that,suppose one fine day if he wants to track the positon of GRN document or a bill at what stagei.e.,if in FI if they say they have not received any document to process or they hold the document for days and say just today GRN has been handed over to him ,The Materials guy has to generate a report and say this is the day the document is handed over to you.
    Is this can be done.or only out of SAP.
    Regards
    Senthil

  • Purchase Register Custom Report -

    Hi Expert,
    Hope you all are fine!
    I am new to CIN.
    I have to develop a custom report for LIV details which will contain the follwing column:
    could you please help me to know from where i can take these field i.e reference table and links.
    Tax Invoice (ref no.)
    Invoice Date
    Vendor Code
    Vendor Name
    Vendor complete Address
    State
    Line item Description in invoice
    Vendor TIN
    Vendor CST
    Value of Goods
    Freight & octroi
    Packing & Forwarding
    Excise Duty
    Education cess
    Sec.Education
    CST value
    VAT Value
    Tax Code
    Tax Code Description.

    As per ur reference: -
    In PO, Condition are like--- PO Qty is 10
    Basic Amount..........1000
    taxes.........................100
    Freight.........................50
    Other...........................20
    and we have receive only 5 qty out of them, means all the condition amount will be 50%. like...
    Basic Amount..........500
    taxes.........................50
    Freight.......................25
    Other.........................10
    all condition will be calculate according to qty 5 not for 10 as showing in PO..
    I want to pick these condition. (according to 5 qty.)..
    Now suggest...

  • How to add a specific parameter in custom report

    hi,
    I have created a custom report in OIM 10g. I have three input parameters. startdate, enddate and resource object name,. With start date and end date the report is displaying correctly. when i add the resource object name as the third specific parameter is throwing the below exception
    java.sql.SQLException: Missing IN or OUT parameter at index:: 15
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
    at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1869)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3858)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
    at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
    at com.thortech.xl.dataaccess.tcDataBase.readPartialStoredProcedure(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.readStoredProcedure(Unknown Source)
    at com.thortech.xl.dataobj.CallableStatementUtil.execute(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.ReportOperationsBean.getPagedReportData(Unknown Source)
    I have given the input parameter correctly in meta data also. anywhere else we need to mention the specific parameter?
    Thanks

    Hey,
    From OIM 9.1.0.2 Reports you have two options:
    With OIMReports:
    1- Including in XML files the parameters as section: Examples of InputParameter tags and ReturnColumns tag
    2-And Creating a New Entry in the REP Table.
    http://docs.oracle.com/cd/E10391_01/doc.910/e10365/reporting.htm
    Section: How to create Report in OIM 9.1.0.2.
    With BIPublisher(easiest way-license is needed):
    Once you downloaded and install BIPub in your application server you will have access to all OIM report definitions.Then it is just a matter of learning how to change a report definition. It's very simple.
    It has a 'desktop tool' that you can install in your desktop. This specifc tool provides an extension to MS Word(MACRO) and you can even work with Word to generate report templates.
    Descriptions:
    0- deploy BIPublisher and OIM reports to your apps server
    1- Install the BIPublisher desktop tools in your desktop
    2- Modify the report query using the BIPub interface and add your UDF fields
    3- Run the report you want to modify from BIPub and export the generated data as XML
    4- Download the report template in RTF format
    5- With RTF file(open it) in your MS Word
    6- Load the XML file you generated in step 4 in your MS Word
    7- You could load this specif xml change what you want. (word will have a 'BI Publisher' menu with different operations you can do)
    7- With Report template(save it).
    8- Update the report template in the report definition(using the BIPub web interface
    9- Run the report again
    It means that front end page you need to edit this in Word page.
    The sources are here: http://www.oracle.com/technetwork/testcontent/oim-reports-9102-130923.zip
    I hope this helps,
    Thiago Leoncio.

  • Error while running a custom report in OIM

    Hi All,
    I have created a new custom report for OIM and written a stored procedure for that. But while running the report from Admin console, its throws the below error:
    java.sql.SQLException: ORA-00911: invalid character
    ORA-06512: at "IDM.XL_EXCEPTION", line 149
    ORA-06512: at line 1
    ERROR,19 Jun 2011 22:09:31,665,[XELLERATE.WEBAPP],Class/Method: ReportAction/displayTabularReport encounter some problems: Error executing stored procedure
    Thor.API.Exceptions.tcAPIException: Error executing stored procedure
    Line 149 : DBMS_OUTPUT.PUT_LINE('select stmt ='|| select_stmt);
    "select_stmt" is a select query based on the OIM tables.
    Please advice.

    Seems like there is a invalid character in your SQL (Report's store procedure). Could you share with me whole content of this "select_stmt" variable?
    regards,
    Thiago L Guimaraes

  • Signal 4 error encountered while running a customized report

    Signal 4 error encountered while running a customized report
    We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
    Can anybody tell the possible causes of signal 4 errors and their remidies ?

    Thank you for the link, i will read it...
    I have problemss with PDF output...
    When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    Spawned Process 499776
    stat_low =84
    stat_high = 0
    emsg:was terminated by signal 4
    Program was terminated by signal 4
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997

  • Migrate custom reports UCCX 8.0 to 9.0 issue

    Dear all,
    We migrated UCCX 8.0 to the new UCCX 9.0. After the migration the customized reports (designed with old version of Crystal Reports) not work in the new CCX Historical Reports 9.0.
    Any idea or procedure to migrate easy the customized reports from UCCX 8.0 to 9.0 without re-design the report with Crystal Reports 11?
    Thanks so much!

    The advice I have seen in this forum, many times, is that you do NOT have Acrobat and Reader installed together, since some components are the same (same module name?) and installing Reader causes problems for Acrobat

  • Reading values from standard report in custom report dynamically

    Hello Gurus,
    I have a strange requirement, We have some standard reports which displays output in drop down blocked data. I want to create a custom report which will get that data in my internal tables.
    Just to elaborate this requirement, I will give you a example:
    I have a standard report which output as first line 'A' and second line as 'B'. Now when I press drop down in 'A', it displays line items say 1,2,3,4,5.... Similarly block 'B' once when pressed displays line items 6,7,8,9,10.
    Here I want a custom report which directly read data from this standard report and gives us the values of line items 1,2,3,4,5 in one internal table and similarly items 6,7,8,9,10 in another internal table.
    Hope the question clarifies the requirement now.
    Request you to please provide the resolution.
    Thanks,
    Harjeet

    Hi Harjeet,
    Use sumit statement for standard program and export the list to  memory. and then read list from memory and use in your custom program.
    Use below code for reference.
    DATA: t_list TYPE abaplist OCCURS 0.
    SUBMIT rfdopr10
                    ************** your options
                    AND RETURN
                    EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject       = t_list
      EXCEPTIONS
        NOT_FOUND        = 1
        OTHERS           = 2.
    BR,
    Vijay

  • How to convert the customized report sales price list into excel sheet

    hi friends,
    i am faceing the probulem in VK13 report is not conveting into excel sheet, then i developed the one customized report,
    in this report i am using the tables are a506, konp,and makt, result is coming and it converted into excel sheet in my systam. when i was clik on the excel sheet icon it comming  excel format it working fine and save it. But in menubar list>export> localfile and select redio button spredsheet this navigation only it print the three colums not coming the total colums,
    same program test in another system it not converted into excel sheet, when i am click on excel sheet icon  it's given the message is 'VIEW CAN NOT BE SWITCHED, PRODUCT NOT INSTALLED OR INTEGRATION NOT ACTIVE'. but i giving the print privew it giving the three colums only,.
    In program i am using regular using reuse_alv_grid_display FM only.
    sorry this qusition is repeted becuse before that one mising some text.
    any one plz help me.
    thanks
    raj

    nice answer

  • How to register custom report under Custom Development Application

    Hi 2 all
    How to register custom report under the Custom Development application in R12 vision DB, and also confirm location/folder of Custom Development application in R12.
    Thanks
    Zulqarnain

    Hi,
    You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
    Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • CUSTOM REPORT

    i have a custom report made for UK, now i want to maintain that same report for US with some fields to be hided. where should i maintain this?

    If the custom report is ALV report which will have lot of option on the application toolbar.  Using user parameters we can change the no.of fields on the output. 
    Regards
    Sravan

  • Custom Report Giving Exception

    While calling my custom report from webconsole i am getting these exceptions
    Class/Method: tcReportOperationsBean/getPagedReportData encounter some problems: {1}
    Caused by [Nested Exception]:
    java.sql.SQLException: Missing IN or OUT parameter at index:: 16
    and
    C lass/Method: ReportAction/displaySectionalReport encounter some problems: Error executing stored procedure
    Please do give some suggestion.

    I am trying to find why this page does not appear : front_page_admin.cgi. My machine address is :http://y2k/identity/oblix/apps/admin/bin/front_page_admin.cgi
    I also have encountered a problem when I was setting up identity console. It gave me an option to select a user but there were no users there, including Administrator. What might have been the cause? This is the serious and major problem. Thank you in advance. Adam Earthman

  • Custom Report on Homepage

    I created a custom report and added it to the homepage. However, you have to click on a link (Generating analysis... Click here to view the results) to see the actual report. Is there a way to see the report immediately?
    Thanks

    Hello,
    You can follow these steps to get this resolved:
    Go to Admin - Click on Application Customization - Under Application Setup, go to My Homepage Custom Report - Find the Report you would like to reset and click Edit - Check the Execute Report Immediately checkbox.
    Thank you,
    yw

  • Custom Report Not fetching values for parameter of report (Valueset not pop

    Hi,
    I am running custom report on Oracle application R12. This report parameters used standard value set for fetching purchase order number. The value set is not populating any values for the custom report. but for the standard report where this valuse set populating proper result.
    It's bit Supprising ...the same valuset populating values for standard reports but not for custom report developed by me.
    Value set query using table valueset and getting values from po_headers (View)
    Thanks

    Hi All,
    Luckily I have been able to rectify the problem !
    I tried retrieving the output using LISTCUBE to show the SID of the InfoObject  also for which I was unable to get the data. After the report successfully gave the output for those I/O, I checked again I could see the data in the I/O maintain master data !
    It worked like magic to me !
    But I could guess that since it is a virtual I/O therefore it is not able to retrieve the data from the table directly and is able to do that only after the SID of this I/O is retrieved.
    (If a characteristic does not have any master data, the values from the SID table are displayed for the "Values in Master Data Table" mode.)
    Closing the thread !
    Regards
    Shalabh

Maybe you are looking for