B2B Help to do following setup : Message from EBS to BPEL to B2B to TP

I created a BPEL to send message to B2B and it works.
BPEL send message to B2B.
Identifies Agreement and etc.
Message have to hit TP using HTTP Post.
TP uses port 443.
In the trading partner setup I tried different channel
I get following message when i change to HTTPS
Error Code     B2B-51503
Error Description     Machine Info: (fusion.companyname.com) Description: General create message error.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     General create message error.
When i tried to change channel setting to HTTP, i am getting wait status.
MSG_WAIT_TRANSMIT
How to debug this case.

General create message error.Above error points that B2B is not able to form the message as per exchange protocol being used. It may happen because of misconfiguration. Please paste the error details here.
MSG_WAIT_TRANSMITMessage may go into MSG_WAIT_TRANSMIT status because of many reasons. Please check the log to find any errors.
Regards,
Anuj

Similar Messages

  • After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine:Are you sure you want to back up to the same device your original data is on? the WD disk has mounted??

    After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?"  I've reformatted in Disk Utilities...not sure what I did wrong.  Any help would be appreciated.

    Not sure what you mean by "booted" from it.
    If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
    Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.

  • Help sending out long email message from ORACLE PL/SQL

    Hello,
    I need help sending out long email message from ORACLE PL/SQL.
    My message(email body) contains about 4000 characters and comes out truncated somewhere on the middle.
    My business requirements do not allow me to send it as attachment.
    I am using oracle utl_smtp package and on oracle 10gR2.
    Is it possible to send out long text message from Oracle?
    Thanks!
    Ia

    Thank you very much for your responses.
    Even if I use email procedure below my message is getting truncated.
    Here is how I am trying to execute the procedure from sql plus:
    DECLARE
    P_SENDER VARCHAR2(32767);
    P_RECIPIENT VARCHAR2(32767);
    P_SUBJECT VARCHAR2(32767);
    P_BODY VARCHAR2(32767);
    BEGIN
    P_SENDER := 'xxxx@yyy';
    P_RECIPIENT := 'xxxx@yyy';
    P_SUBJECT := 'long text message';
    P_BODY :=
    '1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    7 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    8 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    9 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    10 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    11 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    12 34567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
    21 123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789';
    EMAIL ( P_SENDER, P_RECIPIENT, P_SUBJECT, P_BODY );
    COMMIT;
    END;
    SQL> @long_sp;
    PL/SQL procedure successfully completed.
    The email message is:
    long text message
    xxx@yyyy
    Sent:     Tuesday, May 25, 2010 6:52 AM
    To:     
    xxx@yyyy
    1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 7 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 8 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 9 12345678901234567890123456789012345678901234567890123456789012345678901234
    Message is getting truncated around 1000 characters.
    What am I doing wrong?
    Please help!
    Thanks!!

  • Need help with an automating a "Message from webpage" click.

    Any help would be appreciated. I guess I would consider myself as a beginner with VB.NET.
    Basically - My program launches an internet explorer window. Points to a specific webpage that has records. Finds the "check all" and clicks it, then finds and clicks "delete".
    I am stuck at this part. A "Message from webpage" pops up wanting to confirm the deletion of the records. I have 50 records per page and an excess of 14,000 records each day that need to be deleted. I do not have time to click OK on every single
    page.
    I have tried to sendkey function, which worked for a while but for some odd reason, it quit working. Someone suggested using API, which I know nothing about. Please help me! I am desperate!
    Here is my code. I know the "threading.thread.sleep" isn't good to use but I need someway to pause. Like i said, I am a beginner, so please be easy!
    Public Class Form1
    Dim oInputs As Object
    Dim oWShell As Object
    Private Sub btndel_Click(sender As Object, e As EventArgs) Handles btndel.Click
    With CreateObject("InternetExplorer.Application")
    .visible = True
    .navigate("WEDPAGE GOES HERE!")
    Threading.Thread.Sleep(3000)
    oInputs = .document.getElementsbytagname("a")
    For Each elm In oInputs
    If InStr(elm.innertext, "(Un)Check All") > 0 Then
    elm.click()
    Exit For
    End If
    Next
    For Each elm In oInputs
    If InStr(elm.innertext, "Delete") > 0 Then
    elm.click()
    Exit For
    End If
    Next
    Do While .busy Or .readystate <> 4
    Threading.Thread.Sleep(2000)
    Loop
    End With
    Dim objShell = CreateObject("WScript.Shell")
    Dim Success = objShell.AppActivate("Message from webpage")
    Do Until Success = True
    Threading.Thread.Sleep(1000)
    Success = objShell.AppActivate("Message from webpage")
    Loop
    Application.DoEvents()
    AppActivate("Message from webpage")
    SendKeys.Send("{ENTER}")
    End Sub

    Hi msnyder1112,
    Thank you for posting in MSDN forum.
    Since this issue is related to the VB.NET, so we will move this case to VB forum:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • During iTunes installation "Registering iTunes automation server"... I am getting following error messag from "Microsoft visual C   runtime Library"... Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe

    During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
    "Microsoft visual C++ runtime Library"...
    "Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
    "R6034
    An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
    My system is Windows 7 Enterprise - Service Pack1

    Check the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • Need help with the following error message...

    I just got a Shuffle for Christmas and was trying to download iTunes when I got the following message. FYI - I have a PC and the operating system is Windows XP:
    iTunesSetup[1].exe is not a valid Win32 application
    Anyone received this message before? I've looked around the troubleshooting section but am at a loss as to what to do from here...
    Thx

    I do have SR but hoping i can get quicker answer hereYou may always escalate the SR if you are not getting response timely. Anyways, give the reference of this thread in the SR and ask service engineer to file a bug.
    I will email you the wire messageI saw the wire message you mailed across. There are some junk characters in the starting of the payload and that's why parsing is failing. Most probably it is a BOM (Byte Order Mark). Ask your TP to send messages in UTF-8 encoding without BOM or any other junk character in the starting of the message. You may open the wire message payload you mailed across in notepad or textpad and you will able to see those junk characters in the starting of the payload.
    Regards,
    Anuj

  • PLEASE HELP - Unable to restore all messages from my backup file (.bbb) - 21800 messages and I need them all

    Hi.
    This is not the first time I encountered this issue. The backup file itself is 18.5MB in size. The critical stuff is my 21800 messages (emails for 7 different email accounts). Whenever I do a restore, the DM only reads 13859 messages and unfortunately not in reverse order. So I end up with no emails for the last 7 months! BIG PROBLEM for me! I have done a selective restore. I have done a complete wipe and then a full restore (no success), then deleted all data and tried a selective restore and only selected the messages (still only around 13,500 messages).
    There appears to be a limitation around the 13500 mark for messages.
    PLEASE, PLEASE, PLEASE help.

    It's been a while since I used Apple's Backup, but you should be able to select "Restore" from within the app to find an iCal backup file. When you find your most recent backup file restore it to your main computer. An iCal backup should look like this: "iCal - 10/31/06.icbu". Once you have the file you can just double click on it and iCal will open and give a warning about overwriting your current database file. You can just select "Revert" to overwrite the current file since you have nothing in it now. Everything should then go back to the state it was in since your last backup. You might lose some of your most recent entries if they were not in the backup, but you should get back most of what you lost. Good Luck!!

  • Please help I lost all my messages from E71

    I have a big problem with my NOKIA E71
    This is the second time I lost all my messages  and my Mail Box.
    The story is : when I was chatting using MSN messenger on my E71
    The connections failed   many times so I restarted my E71, suddenly after restart
    I did not find any messages or any emails in my Inbox and Mailbox , the second problem is the design of lock on E71 screen was changed to white circle  form however before that it has a rectangular form.
    Is the problem with the software or with my card memory because I used to save all my massages on memory card?
    Please help me   
    Notice : I had upgraded my E71 software to the version 300.21.012 from
     3 months ago.
     thanks

    My E71  also experienced the same problem. It lost all text messages, emails and some folders on the memory card. Will someone from Nokia please tell us what is happening.

  • Can anyone help with the following error message?

    While installing itunes update 7.5 received message Error 1905 module c:\programfiles\itunes\itunesminiplaayer.Dl failed to unregister HRESULT-2147220472

    I noticed no one replied to your questions but was wondering what you found out. I had an ipod shuffle and just replaced it with a 3rd gen ipod nano. The new nano who not show up on my itunes so I went in to update it to the new version and received the same exact error message you did. Were you able to figure out a solution?
    Any help you can give would be greatful.

  • Need help with the following console messages...

    Hello,
    I wanted to know what these messages mean in the Console app. I've had two of these system errors in a row and I would like to know that they mean. They seem to be related to the GPU, and manifest by showing a color spinwheel followed by a complete system crash.
    What do you think?
    1/13/12 12:06:33.246 AM sandboxd: ([108]) DumpGPURestart(108) deny file-write-create /Library/Application Support/SubmitDiagInfo
    1/13/12 12:06:33.288 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.289 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.290 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.291 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.304 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.322 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.323 AM sandboxd: ([108]) DumpGPURestart(108) deny network-outbound /private/var/run/mDNSResponder
    1/13/12 12:06:33.324 AM sandboxd: ([108]) DumpGPURestart(108) deny file-read-data /private/etc/hosts
    1/13/12 12:06:33.325 AM sandboxd: ([108]) DumpGPURestart(108) deny file-read-data /private/etc/hosts
    1/13/12 12:06:33.343 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/13/12 12:06:33.345 AM sandboxd: ([108]) DumpGPURestart(108) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.596 PM sandboxd: ([128]) DumpGPURestart(128) deny file-write-create /Library/Application Support/SubmitDiagInfo
    1/15/12 8:34:16.638 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.645 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.647 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.648 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.649 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.665 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.667 PM sandboxd: ([128]) DumpGPURestart(128) deny network-outbound /private/var/run/mDNSResponder
    1/15/12 8:34:16.667 PM sandboxd: ([128]) DumpGPURestart(128) deny file-read-data /private/etc/hosts
    1/15/12 8:34:16.668 PM sandboxd: ([128]) DumpGPURestart(128) deny file-read-data /private/etc/hosts
    1/15/12 8:34:16.685 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 8:34:16.686 PM sandboxd: ([128]) DumpGPURestart(128) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:09:26.511 PM sandboxd: ([333]) DumpGPURestart(333) deny file-write-create /Library/Application Support/SubmitDiagInfo
    1/15/12 9:09:26.534 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:09:26.536 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:09:26.537 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:09:26.539 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:09:26.541 PM sandboxd: ([333]) DumpGPURestart(333) deny ipc-posix-shm apple.shm.notification_center
    1/15/12 9:11:30.625 PM com.apple.stackshot: Running fs_usage, spindump and top
    I know that my MacBook Pro is the one that has the 330m GPU that has given some problems under Mac OS X Lion. Would like to know if this can be related to the OSX Lion graphics issues in the 2010 MacBook Pros.

    Bump. Any suggestions or ideas? I really need them.

  • N9 help me stop full text message from displaying ...

    My full text message is displaying on the bottom of my wallpaper and on a "notifications" screen. How do I stop this ?
    I only want to read/ see my text when i go into the text area .
    It is not displaying on the black screen with time .
    Attachments:
    text mess disply.jpg ‏1180 KB

    Hi, HPYUNBDAY! Are you only getting this behavior with the text messages? Have you tried checking the messaging settings of the phone specifically the incoming notifications?
    I'm not sure if it's actually possible to disable the notification for text messages. It's possible with the mail messages though. You can go to E-mail > Settings > Incoming Notifications.
    We'll wait for your response.

  • Get filename from EBS to BPEL

    Hi to all,
    I have an ESB process that has a file adaptor, that reads xml files from a certain folder and then routes them to a BPEL process.
    I want FROM Bpel to get the filename, becauase i need to store that filename in my database.
    Can anyone please help me?
    Thank you

    Antonis
    Hope this helps. I had wanted to write files and store the filenames in a database table.
    I haven't it, but I am sure it will work for read as well.
    Edit the adapter WSDL to add an output:
    <portType name="Write_ptt">
    <operation name="Write">
    <input message="tns:resultset_msg"/>
    <output message="hdr:OutboundHeader_msg"/>
    </operation>
    </portType>
    then edit die .esbsvc file:
    change the
    mepDisplayName="One Way" mep="OneWay"
    to[b]
    mepDisplayName="Request Response" mep="RequestResponse"
    in the Reply part of the Routing Service you would be able to use call a database adapter or a BPEL process
    Message was edited by:
    user638991

  • How to delete the messages from JMS Queue

    Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

    You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
    http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
    Regards,
    Anuj

  • Error message from my time capsule

    I get the following error message from my time capsule when I try to backup my HD:
    There was a problem connecting to the server "XXXXX".
    Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.

    You have lost all network connection to the TC. This is not so unusual since Mavericks.
    You have listed hardware but the more important part is OS you are running.
    Have you done a restart of the TC? That often gets it going.
    A full network restart in correct order is next. With everything off.. power up modem.. wait 2min.. power up TC.. wait 2min. Power up computers etc.
    Still no luck. Factory reset the TC and start over.

  • WLC 5508 - LAP1242: Failed to handle capwap control message from controller

    Hello everyone,
    after finally successfully upgrading my WLCs from 6.0.199.4 to 7.6.100.0 there is another problem showing up...
    If I want to change any configuration regarding the APs on the WLCs (which doesn't work) I get the following error-messages from the APs:
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: msg type 12 does not supported payload 215
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: error in Unknown Payload(215) payload (received length = 9, payload type = 215)
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to validate vendor specific message element type 215 len 9.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to decode Configuration update request.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 7 state 11.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.171: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    Find attached some informations regarding the AP and the 5508.
    Any suggestions are, as always, highly appriciated.
    Regards
    Manuel

    Good morning,
    if I need free space at the flash: How much is "enough" to handle config changes?
    Here you can see the filesystem of one of my accesspoints (all are affected):
    AP#dir all-filesystems
    Directory of arch:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    No space information available
    Directory of flash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of zflash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of archive:/
    No files in directory
    No space information available
    Directory of system:/
        2  dr-x           0                      memory
        1  -rw-       17631                      running-config
    No space information available
    Directory of nvram:/
       30  -rw-           0                      startup-config
       31  ----           0                      private-config
        1  ----        4100                      lwapp_ap.cfg
        6  ----         528                      lwapp_ap_tlv.cfg
    32768 bytes total (26572 bytes free)
    Regards, Manuel

Maybe you are looking for