Back ground job sheduling

Hi SAP guru's
if I execute alv list display and alv grid display in back ground is there any difference.
is it possible printing a logo in back ground job schedule.
Points will be rewarded.

Hi Durga, this will help u.
Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
Also, I am sending LOGO report, pls check it.
REPORT YMS_EXCISE MESSAGE-ID E4 NO STANDARD PAGE HEADING LINE-SIZE 350. .
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
kindly reward if found helpful.
cheers,
Hema.

Similar Messages

  • Regarding back ground job sheduling

    hi,
    could u plz clear my issu
             i am running a report which i want to shedule in back ground by writing the code within in that program.
    very urgent

    There are two ways for you to handle,
    one manually setting up the job through SM36 which is better and convinient,
    secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
    Find below steps in doing both:
    Procedure 1:
    1. Goto Trans -> SM36
    2. Define a job with the program and variant if any
    3. Click on start condition in application tool bar
    4. In the pop-up window, click on Date/Time
    5. Below you can see a check box "Periodic Job"
    6. Next click on Period Values
    7. Select "Other Period"
    8. Now give '15' for Minutes
    9. Save the job
    In SM37 u can check the status of the jobs that u have assigned to background...
    Here u mention the job name or the report name to check the status of the job...
    After mentioning the job name or program name u just execute it.. ( without any name also u can execute then it gives u all the jobs set by your user name..
    the status colud be released,active,finished etc..
    Procedure 2 via Program:
    Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
    DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
          L_RELEASE(1) TYPE c.
       CALL FUNCTION 'JOB_OPEN'
         EXPORTING
           JOBNAME                = 'ZTEMP2'
        IMPORTING
          JOBCOUNT               = P_JOBCNT
        EXCEPTIONS
          CANT_CREATE_JOB        = 1
          INVALID_JOB_DATA       = 2
          JOBNAME_MISSING        = 3
          OTHERS                 = 4.
       IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
              TO SAP-SPOOL WITHOUT SPOOL DYNPRO
              WITH DESTINATION = 'HPMISPRT'
              WITH IMMEDIATELY = SPACE
              WITH KEEP_IN_SPOOL = 'X' AND RETURN.
       CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
           JOBCOUNT                          = P_JOBCNT
           JOBNAME                           = 'ZTEMP2'
           STRTIMMED                         = 'X'
           PRDMINS                          = 15
        IMPORTING
          JOB_WAS_RELEASED                  = L_RELEASE
        EXCEPTIONS
          CANT_START_IMMEDIATE              = 1
          INVALID_STARTDATE                 = 2
          JOBNAME_MISSING                   = 3
          JOB_CLOSE_FAILED                  = 4
          JOB_NOSTEPS                       = 5
          JOB_NOTEX                         = 6
          LOCK_FAILED                       = 7
          INVALID_TARGET                    = 8
          OTHERS                            = 9.
       IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
    *Submit report as job(i.e. in background) 
    data: jobname like tbtcjob-jobname value
                                 ' TRANSFER TRANSLATION'.
    data: jobcount like tbtcjob-jobcount,
          host like msxxlist-host.
    data: begin of starttime.
            include structure tbtcstrt.
    data: end of starttime.
    data: starttimeimmediate like btch0000-char1.
    Job open
      call function 'JOB_OPEN'
           exporting
                delanfrep        = ' '
                jobgroup         = ' '
                jobname          = jobname
                sdlstrtdt        = sy-datum
                sdlstrttm        = sy-uzeit
           importing
                jobcount         = jobcount
           exceptions
                cant_create_job  = 01
                invalid_job_data = 02
                jobname_missing  = 03.
      if sy-subrc ne 0.
                                           "error processing
      endif.
    Insert process into job
    SUBMIT zreport and return
                    with p_param1 = 'value'
                    with p_param2 = 'value'
                    user sy-uname
                    via job jobname
                    number jobcount.
      if sy-subrc > 0.
                                           "error processing
      endif.
    Close job
      starttime-sdlstrtdt = sy-datum + 1.
      starttime-sdlstrttm = '220000'.
      call function 'JOB_CLOSE'
           exporting
                event_id             = starttime-eventid
                event_param          = starttime-eventparm
                event_periodic       = starttime-periodic
                jobcount             = jobcount
                jobname              = jobname
                laststrtdt           = starttime-laststrtdt
                laststrttm           = starttime-laststrttm
                prddays              = 1
                prdhours             = 0
                prdmins              = 0
                prdmonths            = 0
                prdweeks             = 0
                sdlstrtdt            = starttime-sdlstrtdt
                sdlstrttm            = starttime-sdlstrttm
                strtimmed            = starttimeimmediate
                targetsystem         = host
           exceptions
                cant_start_immediate = 01
                invalid_startdate    = 02
                jobname_missing      = 03
                job_close_failed     = 04
                job_nosteps          = 05
                job_notex            = 06
                lock_failed          = 07
                others               = 99.
      if sy-subrc eq 0.
                                           "error processing
      endif.
    Thanks

  • Regarding back ground job scheduling

    Hi,
        one of our program was sheduled for back ground job, by another user, so just i need to knwo when this job is sheduled and it is executing daily, so, i need to knwo whether he has created a background job through , sm36, or through a program, how could i found it out.
    thanks in advance.
    jogu

    It is difficult to say. But if you can go to SM37 and check the log of the JOB it will dispaly you some messages.
    This might help you.
    Regards,
    Naimesh Patel

  • Create Back ground job for data recieved from a legacy system

    Hi All,
    I have a requirement where i need to schedule a back ground job once a proxy is triggered for the address data sent from a Legacy system. This proxy is triggerred from SAP PI, then i need to create a job shedule where address data is created as BP's(Business Partners) and assigned to a already created Target Group. Then once the Target group is completed with all BP needs to assigned to aCampaign Id. As the data is large it takes lot of time to execute. Please Advice.
    Regards,
    Nagesh Thanneeru

    Hi
    If you can divide the data into two internal tables and later collect into the one internal table, this could solve yuor problem.
    Also you need to make sure that enough memory is available in the system. Check DB6cockpit for that.
    Also there are a lot of correction notes available with SAP for the error"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
    Check what the job exactly does, and search for the relevant notes, as there are different notes for different application areas...
    if its a loading job(Infopackage) you can reduce the data packet size of the IP, but that might hamper the loading performance.
    Hope this helps
    Regards
    Shilpa

  • How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

    Hi
    How To Scheduled A Job Through ABAP Report In back end  Of CRM when i click on "Approve" Button in WEBUI  From result list.
    As per My requirement I have a Search View and Result View
    In Search View I have  Below Fields
    ITC Vendor ID    
    Claim Status
    User status (date status changed)
    Model
    Serial Number
    Date completed of Service Completion
    Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
    In the Result View I need to Add one Button As "Approve"
    When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
    "Approve  Claim Job Has Started In Background  
    Note: Only Claims Which are in Submitted  Status  Will be  Approved. you May Close This Window"
    In SAP CRM System  Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
    In the Back Ground ABAP Report which will validate based on Result List Records"
    In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
    I need to collect all records from Result list and validate Those Records who's Status in "Submitted
    1)Sort all the claims based on ITC Vendor ID.
    2)Grouped all the submitted claims against each ITC Vendor ID from the search result
    3)Change the status of the selected submitted claims to Approved.
    4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
    ‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
    5)Sending Email to each IRC.
    6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
    7)Store the file in the Application Server AL11 in .csv format
    Please Find Attachement For Reference.
    1)ITC Claim Screen Shot
    2)Screen Shot For Attachment
    Thanks
    Raj

    Hi,
    You can add the following code in on approve method to show popup to the user,
    IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
        REFRESH lt_buttons.
        lss_button-id  = 'btnyes'.
        lss_button-text = 'YES'.
        lss_button-on_click = 'YES'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        lss_button-id  = 'btnno'.
        lss_button-text = 'NO'.
        lss_button-on_click = 'NO'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        CALL METHOD comp_controller->window_manager->create_popup_2_confirm
          EXPORTING
            iv_title          = 'ATTENTION'
            iv_text           = 'Are you sure you want to edit this document?'
            iv_btncombination = '99'
            iv_custombuttons  = lt_buttons
          RECEIVING
            rv_result         = req_edit.
        req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
        req_edit->open( ).
        RETURN.
      ELSE.
        lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
        lv_outbound = lr_node->get_event_name( ).
    *  CLEAR ptc_pricing_status.
    *    lv_outbound = req_edit->get_fired_outbound_plug( ).
        IF lv_outbound = 'YES'.
    you can use the submit report code here and you can al the validations here
        ELSE. " No
    if user clicks no nothing to do..
        ENDIF.
        CLEAR req_edit.
      ENDIF.
    Best Regards,
    Dharmakasi.

  • How to find the back ground job details

    Hi All,
       I have a back ground  job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
               Please informe me how to check this.
    Thanks & Regards,
    Muralikrishna

    On SM37 screen there is plenty of options are there:
    This is what i got from SAP help
    Explanation for each selection field:                                                                               
    o   Jobname: Name of the job as an identifier.                                                                               
    o   Username: Name of the user who designed and planned the job.                                                                               
    o   Start date: The start condition of the job, which could be a time 
    frame or an event that the job is waiting for. Specifying both will   
    yield jobs whose starting condition is  either of the two             
    conditions.                                                                               
    ABAP program step: Name of an ABAP program that acts as a step in a   
    job.                                                                               
    Status selection: The current status of the job. By default, the      
    SCHEDULED option is not marked. To see the scheduled jobs, you must   
    explicitly check this.
    also give the proper values in Job Satus also.

  • Scheduling Back Ground job

    Hi All,
    I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
    Can any one tell me whether it is possible to save back ground job output in specified directory?
    Thanks & Regards
    k.Nirmala

    Hi Nirmala,
    Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
    Define job at Sm36 and use program - RM07MLBS and use your variant.
    schedule job and set up time and date for periodcally.
    and it will run and you can see the status at SM37 Transaction .
    the background job will create spool and which will contain your output.
    if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Error while activating ODS is not caught in the back ground job..

    Hi All,
    We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
    My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
    Thanks for reading.
    Umamaheswar kumar

    Hi Uma,
    A few hints for running and schedule and monitoring process chains:
    - always schedule the process chain in tcode RSPC
    - check the log in RSPC for error messages, or
    - check BW monitor for the ODS concerned (tcode RSMO, tab Details)
    if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
    either in RSPC - log or RSMO.
    hope it helps.
    Regards,
    Lilly

  • Back ground job problem

    hi every  one,
      pls help me out in this.
      i have written a program to create a wbs element.as it takes  20 to 30 min to create one element in production.in my program, there is part of code which creates wbs elements.
    so i want to run tht part of code in background.
    only part of code.
    even i did the coding for it. i wrote  a new program and i pasted that part of code in new program.
    and this new program i m submitting in old one by creating a back ground job.
    i m exporting few required internal tables for new report.i hav imported all internal tables in new report also..
    but still this importing exporting is not happening..pls
    tell me wat can be the problem..
    thanks..

    Your code is not optimized according to performance,can you sed me your code ...
    see my business card  for my  id.
    Thanks

  • Max no of lines appear in the back ground job out put

    Dear All,
    Please help me to solve following query,
    I am execution ME2N report in background. There are more then 100000 line item in the out put. However only 5000 line appear in the output of background job.
    Is there any setting in sap, where i can change the max no of out put is more then 100000 in back ground job?
    Your earlier answer should be highly appreciated?
    Regds,
    sp sahu

    Click on the settings button and choose the 'The last' radio button for dispaly area and put in 10 pages.
    Sometimes just clicking on the Last page button on the Tool bar will do the trick

  • How to download the application file to local file by back ground job?

    hi:
      can any one tell me how to download the application file to local file by back ground job? thanks in advance..
    Monson

    Hi,
    In order to download a file from application layer to a local file in background,
    first write a report(ZREPORT1) in which do the following steps:
    OPEN DATASET g_file_1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    loop the g_file and append all the data into another internal table.
    end of this report you shd have all the data in the application layer file into your internal table.
    Now create another report(ZREPORT2) and submit this report in background.
    that is,
    JOB_OPEN
    JOB_SUBMIT and
    JOB_CLOSE
    and in job_submit submit ZREPORT1 which downloads the file in application layer.
    Please reward points if helpful.
    Regards,
    Arul.

  • Back Ground Job scedule (emergency)

    Hi all ,
    I have scheduled Back Ground Job in Production System at morning 11am, now the job is in running status,but i wonder that before the status come to completed the
    LAST RUN Column is filled with Date and time same at 11:am.
    Please find the below job log details i am pasting last few lines of job log
    Jun 5, 2008 2:15:22 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:6 : Before GC => memory usage: free=481M, total=1009M
    Jun 5, 2008 2:15:22 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:6 : Analysis starts: HTREMGMT2
    I would like to know wheather job is running or terminated.
    Wat is the sequence of JOB status in CC5.2.
    Kindly do the needfull.

    Hi Amol,
    Thank You very much for ur quick reponse,
    please find the view job log details
    (last few lines)
    Jun 5, 2008 3:07:12 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:6 : 464 out of 818 (56%) done
    Jun 5, 2008 3:07:12 PM com.virsa.cc.xsys.bg.BgJob setStatus
    INFO: Job ID: 6 Status: Running
    Jun 5, 2008 3:07:12 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:6 : Before GC => memory usage: free=347M, total=1009M
    Jun 5, 2008 3:07:12 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:6 : Analysis starts: MACTUSER17
    Jun 5, 2008 3:07:21 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
    FINEST: ObjAuthMatcher constructed: 0ms, #singles=970, #ranges=0, #super=0
    Jun 5, 2008 3:07:22 PM com.virsa.cc.dataextractor.bo.DataExtractorSAP getObjPermissions
    FINEST: getObjPermissions: elapsed time=891ms
    can u tell me the job status sequence

  • Back ground job work in MM

    CAN ANY BODY TELL ME WHAT IS A BACK GROUND JOB WORK IN MM pls explain it with good example tell me 1 or  2back ground job work relevent transactions
    good answer will be awarded
    kiran

    Hi,
    Background job means system will automatically perform some transaction / actions at perdetermined time based on the variants selected for that program.
    Ex 1: You want to see the list of PO or PR or Production order created for a day, you can create a ABAP program and give the creation date in selction screen.
    Provide the Plant or doc type, file path to download the report etc..
    and save the variant.
    You can set this program to run during mid night( 11.00 p.m) with the sysytem date (crrent date).
    So system will run this program and extract the report in Application server level as per the file location given in the program selection screen.
    Ex 2:
    MRP program
    Ex 3.
    Auto PO creation program
    Thanks,
    Kumar Arcot

  • How to reschedule a Back ground job in Normal ABAP from Web Dyn Pro abap application??

    Hi Experts,
    How to reschedule a Back ground job in Normal ABAP from Web Dyn Pro abap application??

    Can you give us some more information? Background jobs primarily don't have anything to do with Webdynpro.

  • Scheduled back ground job not finishing

    hie gurus, i need your help with back ground scheduling , i have created a background schedule to run my program after every 30min .  in the job overview it shows my job released and active but its not finishing processing . the program being run picks up data from an external data base and then inserting via BDC call transaction. i have tried with a different program that inserts data into a database table and its executing and finishing well in the back ground. What could be the problem ? and how can i debug a back ground job ??

    Daniel,
    To start, BDCs are very out-dated.  I would look for a BAPI if you are calling std SAP functionality.
    Also - direct updates into std SAP tables is a HUGE "no-no"... I hope that you are updating custom tables only.
    Pass that - to debug a b/g job---> 
    1) Set a breakpoint in your program
    2) select the job in SM37
    3) enter JDBG into the SAP fastpath of the SM37 screen and press ENTER
    This will navigate you into a b/g debug - you can then press the debugger buttons to move to your breakpoint.
    Hope that helps.

Maybe you are looking for