BADI for populating virtual Key Figure : Exception Occurs

Hello,
I am using BADI for populating virtual Key Figure.
Since my info provider in a Cube , query is built on it with addition to Virtual Key figure.
I have used select statement for retrieving data from cube as input for the variables in BADI.
But after debugging it , it stop or exception occurs at the select statement.
Need help for the same.
My code : Cube name : ZGMR_C01
DEFINE ******
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
 WHEN 'ZGMR_C01'.
 l_s_chanm-chanm = 'ZEC_PLOAD'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
 l_s_chanm-chanm = 'ZCOM_BLM'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
 APPEND 'ZVKF_TTBL' TO c_t_kyfnm.
ENDCASE.
endmethod.
DEFINE ******
COMPUTE *****
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_ZVKF_TTBL> TYPE ANY. -
Virtual Key Figure
FIELD-SYMBOLS <fs_ZEC_PLOAD> TYPE ANY. -
Variable 1
FIELD-SYMBOLS <fs_ZCOM_BLM> TYPE ANY. -
Variable 2
DATA: l_ZVKF_TTBL TYPE /BIC/OIZVKF_TTBL.
TYPES : BEGIN OF TY_ITAB,
PLOAD TYPE /BIC/OIZEC_PLOAD,
BLMONTH TYPE /BIC/OIZCOM_BLM,
TOTBL TYPE /BIC/OIZKF_TOTBL,
END OF TY_ITAB.
data: IT_ITAB TYPE STANDARD TABLE OF TY_ITAB,
 WA_ITAB type TY_ITAB.
data: IT_ITAB1 TYPE STANDARD TABLE OF TY_ITAB,
 WA_ITAB1 type TY_ITAB.
ASSIGN COMPONENT P_KYF_ZVIR_TOT OF STRUCTURE c_s_data
TO <fs_ZVKF_TTBL>.
ASSIGN COMPONENT P_CHA_ZVIR_POL OF STRUCTURE c_s_data
TO <fs_ZEC_PLOAD>.
ASSIGN COMPONENT P_CHA_ZVIR_MON OF STRUCTURE c_s_data
TO <fs_ZCOM_BLM>.
break-point id z_routines.
SELECT /BIC/DZGMR_C011SID_ZEC_PLOAD /BIC/DZGMR_C01TSID_0CALMONTH /BIC/VZGMR_C01F~/BIC/ZKF_TOTBL
FROM /BIC/VZGMR_C01F
INNER JOIN /BIC/DZGMR_C011 ON /BIC/VZGMR_C01FKEY_ZGMR_C011 = /BIC/DZGMR_C011DIMID
INNER JOIN /BIC/DZGMR_C01T ON /BIC/VZGMR_C01FKEY_ZGMR_C01T = /BIC/DZGMR_C01TDIMID
INTO TABLE IT_ITAB
WHERE /BIC/DZGMR_C011~SID_ZEC_PLOAD = <fs_ZEC_PLOAD>
AND /BIC/DZGMR_C01T~SID_0CALMONTH = <fs_ZCOM_BLM>.
break-point id z_routines.
LOOP AT IT_ITAB INTO WA_ITAB.
WA_ITAB1-PLOAD = WA_ITAB-PLOAD.
WA_ITAB1-BLMONTH = WA_ITAB-BLMONTH.
WA_ITAB1-TOTBL = WA_ITAB-TOTBL.
COLLECT WA_ITAB1 INTO IT_ITAB1.
CLEAR : WA_ITAB1 , WA_ITAB.
ENDLOOP.
break-point id z_routines.
IF sy-subrc EQ 0.
<fs_ZVKF_TTBL> = WA_ITAB1-TOTBL.
endif.
endmethod.
COMPUTE *****

Exception :
Exception CX_SY_NO_HANDLER triggered
An exception with the type CX_SY_OPEN_SQL_DB occured, but was not handled
This comes when i debug the BADI.

Similar Messages

Create Badi for Virtual Key Figure

Hi experts,
i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
Badi name is RSR_OLAP_BADI
i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
it first time dat i m creating BAdi.
Ankit
Edited by: ankit375 on Feb 3, 2011 11:14 AM
Edited by: ankit375 on Feb 3, 2011 11:14 AM

To see how to create this BADI see here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
You you need to be registered as developer (you have to have dev.key) to do the coding.

Virtual Key Figures in RSR_OLAP_BADI not re-calculated correctly

Hello BW/BI Experts!
    Please clarify why is the COMPUTE METHOD of RSR_OLAP_BADI not triggered or executed
if you remove a drilldown to a certain characteristic.
    For instance, my query is drilled down by customer and material by default. Upon
opening the query and after entering the appropriate selections, the virtual key figures
that I have used in the query are correct .
    However, if you remove the drilldown by customer(for example), the virtual key figure
is not re-computed. I was able to verify this by setting break-point in the COMPUTE
method. However, if you drilldown by customer again, the re-calculation for the virtual
key figure is correct likewise, if you refresh query, the results will be correct.
     Is this really the normal behavior of the said BADI? Why is it unstable? If I will
use RSR00002(the user exit version), will I not have the same issue?
Thanks in Advance!

If I will use RSR00002(the user exit version), will I not have the same issue?
I dont see any reason why this wouldnt behave the same way.
I assume from ur post that you need to read ur customer and material to derive ur virtual KF in the BAdi. When you remove the drilldown the customer value is no more available for the exit to calculate the KF, thats when it throws out a wrong number. I havent seen a work around for this. Please update the form if you find a solution to get the customer values into the exit even after removing the drill down.

Problem with virtual Key Figure in a query

Hi Experts,
I would like to share my problem with the virtual key figure in a query:
I have a query with a virtual key figure and when I eject the query by analyzer, the result sometimes is displayed and sometimes is not displayed (is equal to 0), with the same initials values. And when I eject the query by RSRT always display the result for the virtual key figure.
Why don't always display the result?
Thanks a lot

Hi,
I think that the problem is the level of support package. We have BI AddOn 7.X (based on 7.20) support package 0.
What do you think?
Regards

Access on aggregated levels with virtual key figures

Hi all,
I need access to the aggregated view of a BEx report within user-exit RSR00002 for processing virtual key figures. Currently I only get access to the lowest non-aggregated level.
My requirements in detail:
I get certain key-figures (250 historical values)on the lowest aggregation level - so-called folders. Then I have to aggregate this vector of values at the next hierarchy level up to the top-level, say along-side a company's business department structure. Drill-down, slice&dice should be possible. So far so good - this is done easily with standard BEx features.
Then, on each aggregation level, i.e. hierarchy node, I need to get the third lowest of the 250 aggregated values to assign this to my vkf. This is not an issue of the algorithm but of the internal data representation or access to the OLAP processor because I don't get this vector on the same aggregated level such as I could see it in my BEx report but on the lowest non-aggregated folder level.
The question is now:
a. Is data access on aggregated levels and drill-downs because of the internal representation generally not possible within this user-exit and would I have to supply the aggragation logic myself or
b. do I have overlooked something critical - did I miss the trick?
Every idea or hint is deeply welcome!!
Thanks a lot,
Michael
Message was edited by: Michael Kronenberger

First check in Technical Information in RSRT , whether the
Virtual Char/Key Fig is Y or N.

Type conflict with ASSIGN in BADI for Virtual Key Figures

We get the below error dump in ST22 when executing BEx queries that contain virtual key figures.
error message - 'Type conflict with ASSIGN in
program "ZCL_IM_THR_RSR_OLAP_BADI======CP".'
We have a BADI implementation that calculates few virtual key figures included in some infocubes & multiproviders. The error would arise if we execute two queries (containing common Virtual Key figures) one after the other without closing the first query.
We found a note "Note 1237689 - Virtual chars. and key figures in input-ready querys" that could be relevant to our issue and wanted to apply this note but unfortunately the note is only applicable to SAPKW70016 to SAPKW70018 and we are support pack 15.
Can you please advise what the problem could be/suggest corrections for the same.

Hi Kulmohan,
Did you fix your issue? We are facing the same issue. Could you please let me know if you have any solution for this issue,
Thank you,
Mike

Help needed for Virtual Key Figure BADI

I am trying to implement Virtual Key Figures via BADI.
Here is what I have done
Define Method
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
WHEN 'ZMCOPA_02'.
l_s_chanm-chanm = '0CUSTOMER'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZCPRC_FLG' TO c_t_kyfnm.
APPEND 'ZRTNS_PRC' TO c_t_kyfnm.
ENDCASE.
ENDMETHOD. "if_ex_rsr_olap_badi~define
Compute Method
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_ZRTNS_PRC> TYPE ANY.
FIELD-SYMBOLS <fs_ZCPRC_FLG> TYPE ANY.
FIELD-SYMBOLS <fs_0customer> TYPE ANY.
DATA: l_zv_20dv TYPE curr09.
ASSIGN COMPONENT p_kyf_ZRTNS_PRC OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_kyf_ZCPRC_FLG OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_cha_0customer OF STRUCTURE c_s_data
TO <fs_0customer>.
DATA: l_zrtns_prc TYPE /bic/pzcust_prc-/BIC/ZRTNS_PRC.
DATA: lt_zcust_prc TYPE TABLE OF /bic/pzcust_prc.
DATA: ls_zcust_prc TYPE /bic/pzcust_prc.
IF NOT p_cha_0customer IS INITIAL.
<fs_0customer> =
ENDIF.
SELECT SINGLE *
INTO ls_zcust_prc
FROM /bic/pzcust_prc
WHERE /bic/zcust_prc = <fs_0customer>.
IF sy-subrc = 0.
<fs_ZCPRC_FLG> = 1.
<fs_ZRTNS_PRC> = ls_zcust_prc-/BIC/ZRTNS_PRC.
ELSE.
<fs_ZCPRC_FLG> = 0.
<fs_ZRTNS_PRC> = 0.
ENDIF.
endmethod.
I have commented out line in the Compute method because I was getting an error on my SELECT statement. I think the error is due to the fact that <fs_0customer> is not being populated.
In debug mode, p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer all return 0. Shouldn't they have a different value. I have to admit that I don't really understand how ASSIGN COMPONENT works.
I have defined p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer in the Attribute tab.
Any help would be appreciated. I have spent several hours trying to figure out how this works.
Thanks.
Ryan

Check this if it helps:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c

Problems with creating badi implementation for virtual key figures

Hi,
I'm running BI 7.0 (unicode).
I have been trying to follow this blog to calculate the virtual keyfigure in my infoset - Using Virtual Key Figure and Characteris in an InfoSet
My infoset includes 1 infocube, and 3 master data infoobjects. I have created everything the blog was referring to, and activated fine. However, it seems that when the field symbols are assigned from the c_s_data structure, they do not get referenced correctly, so that no correct memory area is assigned and instead the whole c_s_data structure is assigned to the field symbol, which prevents me from referencing the right mem area correctly.
For example, in this statement
ASSIGN COMPONENT P_CHA_ZMYINFOSET___F120 OF STRUCTURE c_s_data
TO <fs_ZMYINFOSET___F120>.
the component p_cha_zmyinfoset___F120 of c_s_data supposed to be assigned to the field symbol (point to the correct place in structure c_s_data). In other words when this statement is executed, the program looks at structure c_s_data, finds the component zmyinfoset___F120 in it, and assignes the position of that component in the structure to the field symbol, so that it could be referenced in the code. However, the correct assignment does not happen.
When I debug the code and view the structure c_s_data, I can never find any component with any of the names I can find in my BEX query like ZMYINFOSET___F120. All I see are the components that are named like these: Z____5179 (C_S_DATA-Z____5179), C_S_DATA-S____5150, etc. I see the correct values, but components all have weired names like that. I thought in Infosets the components are named in the following fashion: INFOSETNAME___FXXX which you can see from your BEX query designer. Why is this happening? Why don't I see the correct names in the c_s_data structure? If instead I try to assign those components with their weired names directly, I still get incorrect assignment.
what am I doing wrong?
I was reading abap help on this statement: assign COMPONENT comp OF STRUCTURE struc
and the following I found:
With this expression for mem_area, the memory area of a component comp of a structure struc is assigned to the field symbol. While the structure struc is specified directly, a data object must be specified for comp. The evaluation depends on the data type of comp:
If the field comp has a non-text, elementary type, the content is converted to the type i and interpreted as a position of the component in the structure. if the value for comp is 0, the storage area of the entire structure is assigned to the field symbol.
From what it says above, my value for comp is always 0, so that the entire structure is always assigned to my field symbol instead of a specific position in that structure.
please let me know what is wrong here.
thanks.
Edited by: AG on Oct 11, 2008 10:41 AM
Edited by: AG on Oct 11, 2008 10:42 AM

Hi,
I am facing the similar issue. Can you please tell me how you solved this problem in more details?
which sample code and how u can find that in SE24 and where to copy that code.
Thanks in advance..
vamsi.

Virtual Key Figures its not populated when execute query

Hi All
I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
DATA: l_s_chanm TYPE rrke_s_chanm,
 l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
 <l_s_chanm> TYPE rrke_s_chanm.
I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
I did other things like:
Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
I generate again the query on RSRT.
My code is:
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
data: L_S_CHANM type RRKE_S_CHANM,
 L_KYFNM type RSD_KYFNM.
field-symbols:
 <L_S_CHANM> type RRKE_S_CHANM.
case I_S_RKB1D-INFOCUBE.
 when 'ZGTO_OB2'.
 append 'ZVIRTKF' to C_T_KYFNM.
endcase.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
field-symbols <FS_ZVIRTKF> type any.
P_KYF_ZVIRTKF = 16.
assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF>.
<FS_ZVIRTKF> = 10 .
endmethod.
I will appreciate your recommendations, Thanks in advanced.
Al

Thank you very much Sanganya
I saw this:
I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
Then when the system try to run the sentence: <FS_ZVIRTKF> = 10 the system send an Execution error that say: GETWA_NOT_ASSIGNED...
Error analysis
 You attempted to access an unassigned field symbol
 (data segment 32780).
 This error may occur if
 - You address a typed field symbol before it has been set with
 ASSIGN
 - You address a field symbol that pointed to the line of an
 internal table that was deleted
 - You address a field symbol that was previously reset using
 UNASSIGN or that pointed to a local field that no
 longer exists
 - You address a global function interface, although the
 respective function module is not active - that is, is
 not in the list of active calls. The list of active calls
 can be taken from this short dump.
Exactly the line selected with error is:
>>>> <fs_zvirtkf> = '10.0'.
I will appreciate your help
Thank you
Al

Issue with Virtual Key Figures Using BADI

Hi,
We are populating values for a few virtual key figures in a query over a multiprovider through a BADI implementation(RSR_OLAP_BADI). On execution the VKF fields appear blank in the report.
We tried debugging the methods of BADI by adding Break-Points in specific points. On doing so, we found that the values are properly updated in the 'Field-Symbols' used in the Compute method, but the same values do not appear in the report result and the fields are blank.
Kindly provide any pointers or suggestions.
Thanks.

First check in Technical Information in RSRT , whether the
Virtual Char/Key Fig is Y or N.

Virtual Key figure not getting populated

Hi All,
I have included a virtual key figure in a multiprovider on which the query is created and its underlying ODS.
This issue is the virtual key figure is not getting populated . I am not sure what I am missing
I did the following :
1) Tried Debugging - Put a break point and execute the query in RSRT.It did not go to the Exit. I also tried generating the query from RSRT.
I am using the BADI (RSR_OLAP_BADI) to populate the Vir Key Fig.
Please guide me.
Thanks,
HM

Hi All,
Now that I am able to get the logic to come up in debug. I am faced with another issue.
I am implementing avery simple logic . I added a integer type key figure to the ODS and I am tryin to assign value 1 to the the key figure in the code (I am assigning 1 just ot check if the value is passed to query or not. I do have acomplex logic tha i need to implement).
Here I am able ot see the value in the debug but in the qury the value is not populated.
N ot sure what might be going wrong.
code is
l_z_avg = 1.
<fs_zavglate> = l_z_avg .
Appreciate help.
Thanks,
HM

Virtual key figure BADI - does not change value

I wrote a badi for virtual key figure according to guidelines from an SDN doc on how to create virtual chars and kf's.
However, the value of the key figure is not changed at all. Below is my code. Please see what I'm doing wrong
method IF_EX_RSR_OLAP_BADI~DEFINE.
 APPEND 'ZRANKS' TO c_t_kyfnm.
endmethod.
method IF_EX_RSR_OLAP_BADI~COMPUTE.
if P_KYF_ZRANKS > 0.
 assign component p_kyf_zranks of structure c_s_data
 to <fs_ranks>.
 <fs_ranks> = '1.0'.
endif.
endmethod.

There is something you need to do which I have not seen described in any of the documention here.
You need to copy the source code for the INITIALIZE method directly from the code given in the example class CL_EXM_IM_RSR_OLAP_BAPI. That is where the P_KYF<object> and P_CHA<object> attributes are assigned their values. If you do not copy this code into your own implementation, these attributes have no value in the COMPUTE method and your code will probably not work.
Bryan

Do we write variable customer exits for virtual key figures in Bex?

Hi all,
Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
Thanks,
JB

Nevermind

BEX - Virtual key-figure

Hi gentlemen,
I am facing a problem with a BADI that I created for populating a virtual key figure.
I simply want to read a masterdata table and populate a key figure. When executing the query, a dump occurs with a very explicit explanation. Unfortunately, I don't know how to solve it.
Dump:
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Attributes in the BADI:
P_CHA_0PLANT Instance Attribute Private Type I Plant
P_KYF_ZSHPQTEUT Instance Attribute Private Type I Shipment quantity EUT
See below.
Define:
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm like line of c_t_chanm.
DATA: l_kyfnm TYPE rsd_kyfnm.
CASE i_s_rkb1d-infocube.
 WHEN 'ZFM_M01'.
 l_s_chanm-chanm = '0PLANT'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
l_kyfnm = 'ZSHPQTEUT'.
APPEND l_kyfnm TO c_t_kyfnm.
endcase.
ENDMETHOD. "if_ex_rsr_olap_badi~define "
Compute:
METHOD if_ex_rsr_olap_badi~compute .
FIELD-SYMBOLS: <fs_ZSHPQTEUT> TYPE /BIC/OIZSHPQTEUT.
FIELD-SYMBOLS: <fs_0PLANT> TYPE /BI0/OIPLANT.
ASSIGN COMPONENT P_CHA_0PLANT OF STRUCTURE c_s_data
TO <fs_0PLANT>.
ASSIGN COMPONENT P_KYF_ZSHPQTEUT OF STRUCTURE c_s_data
TO <fs_ZSHPQTEUT>.
SELECT /BIC/ZSHPQTEUT
INTO <fs_ZSHPQTEUT>
UP TO 1 ROWS
FROM /BI0/PPLANT
WHERE PLANT = <fs_0PLANT>.
ENDSELECT.
ENDMETHOD.
Thank you in advance.
Jacques

Hi Jacques,
Please include 2 changes:
1. As suggested by Jen, declare Field Symbols with type ANY.
2. Instead of directly using Field symbol values in the select query, create 2 temporary variables of type string and use them.
After changes the method COMPUTE would look like below:
METHOD if_ex_rsr_olap_badi~compute.
FIELD-SYMBOLS: <fs_ZSHPQTEUT> TYPE ANY.
FIELD-SYMBOLS: <fs_0PLANT> TYPE ANY.
ASSIGN COMPONENT P_CHA_0PLANT OF STRUCTURE c_s_data
TO <fs_0PLANT>.
ASSIGN COMPONENT P_KYF_ZSHPQTEUT OF STRUCTURE c_s_data
TO <fs_ZSHPQTEUT>.
DATA tp_shpqty type string.
DATA tp_plnt type string.
IF <fs_0PLANT> is ASSIGNED.
tp_plnt = <fs_0PLANT>.
ENDIF.
SELECT SINGLE /BIC/ZSHPQTEUT
INTO tp_shpqty
FROM /BI0/PPLANT
WHERE PLANT = tp_plnt.
IF <fs_ZSHPQTEUT> is ASSIGNED.
<fs_ZSHPQTEUT> = tp_shpqty.
ENDIF.
ENDMETHOD.
Regards,
Hemant Khemani

Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

Hi All,
Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets?
I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success.
The VKF / Characteristics works fine when it is being used with a query based on the ODS however it is not populated when i am using the infoset. Moreover i have used the code for InfoSet as well it is not working.
I would appreciate any help in this regard.
Regards
Noor

Hi PV,
r u sure about that, as i have tried all sort of permutation and combinations for using the same in RSR_OLAP_BADI without any luck.
I have the got felling about the same however if you look into the following SAP note it puts me into doubt.
Note 657690 - Virtual characteristics and key figures in InfoSets
Note 618738 - Virtual characteristics or key figures and InfoSets.
It describe about using the RSR00002.
Many thanks for the information.
Kind Regards
Noor

BADI for populating virtual Key Figure : Exception Occurs

Similar Messages

Maybe you are looking for