Badi / Screen Exit for ME51N

Hi Folks,
My requirement is to add a standard field in the existing tab . Is there any BAdi / Screen Exit provided for tcode ME51n. I have checked the provided Exits and BAdi's but all of them are to add a new tab. But in my case I want to add a field in the existing tab.
Kindly let me know the possibilities.
Thanks in Advance.
Somu

Hi Soma,
As i know it is not possible  . Better to add a new tab and add fields there.
Regards,
Madhu.

Similar Messages

  • Screen Exit for ME51N and ME52N ??

    Hi all,
    I have to replace the standard Field "Requisitioner" in the CONTACT Tab with a Z table field with Search help and I have to make it mandatory, so that the user MUST enter the Requisitioner and its F4 help can be used from the Z Table field.
    For this i need to modify standard program's screen using screen exit.
    How can i meet the requirement?
    Any sugegstions are welcomed...Helpful answers will be rewarded for sure..
    Thanks in advance,
    Regards,
    Tejas

    Check the threads -
    User Exit or BADI   for ME21N or ME51N
    ME51N user exit
    Screen Exit for  ME51N
    Regards,
    Amit

  • Screen exit for ME51N in header

    Hi friends,
    Is there any screen exit for ME51N(Purchase requisition) in header level.I found MEREQ001 enhancement, but this is for item level.please help.
    regards,
    Thoufique.

    Hi Thoufique,
    try the following screen exits:
    EXIT_SAPLMEREQ_001 Export Data to Customer Subscreen for Re
    EXIT_SAPLMEREQ_002 Prepare Customer Subscreen for Requisiti
    EXIT_SAPLMEREQ_003 Import Data from Customer Subscreen for
    Also, for more help on your problem, refer to the following link:
    Re: re: screen exits
    Hope this will help you...

  • Screen Exit for  ME51N

    HI ,
    EVERYBODY
    I AM DOING SCREEN EXIT FOR TCODE ME51N, ENHANCEMENT (MEREQ001) EXIT SAPLMEGUI , I HAVE ADDED TWO FIELDS
    VALIDITY START DATE AND VALIDITY END DATE.
    I HAVE CONFUSION ABOUT HOW TO EXPORT DATA ENTERED IN SUBSCREEN.
    PLS HELP ME ..........
    THANKS & REGARDS
    SANJEEV

    hi,
    EXIT_SAPLMEREQ_001 -
    Export Data to Customer Subscreen for Requisition (PBO)
    *sample code write in the corresponding include
    DATA: ls_mereq_item TYPE mereq_item.
    clear eban values if no PReq item
    IF im_req_item IS INITIAL.
      CLEAR: *eban,
             eban.
    ELSE.
    read item data from system
      ls_mereq_item = im_req_item->get_data( ).
    fill customer field with old values
      eban-zflag = ls_mereq_item-zflag.
       *eban-zflag = ls_mereq_item-zflag.
    ENDIF.
    Read and store activity type to chnge the field status
    of the subscreen
    IF NOT im_req_item IS INITIAL.
      gf_aktyp = im_req_item->GET_ACTIVITY( ).
    endif.
    EXIT_SAPLMEREQ_003 Import Data from Customer Subscreen for Requisition
    data:     ls_mereq_item type mereq_item.
    *get values if PReq item exists
    if not im_req_item is initial.
    *read item data from system
      ls_mereq_item = im_req_item->get_data( ).
    *if customer field changed
      if eban-zflag ne *eban-zflag.
    *fill field with new value
        ls_mereq_item-zflag = eban-zflag.
    *set new item data to system
        call method im_req_item->set_data( ls_mereq_item ).
    *tell the system that there has something changed on the customer tab
        EX_CHANGED = 'X'.
      endif.
    endif.
    cheers,
    sasi

  • Screen Exit for Header ME51N

    Hi experts, there is some screen-exit for HEADER of ME51N??
    I've found only MEREQ001, but it has a screen exit only for item requisition...
    Thanks.
    Alexandere

    Hi,
    check the following screen exit Information for Enhancement "MEREQ001"
    Calling screen     No.   Area       Called screen     No.
    SAPLMEGUI       0014 SUB0     SAPLXM02        0111
    also find the following user-exits
    EXIT_SAPLMEREQ_001             Export Data to Customer Subscreen for Re
    EXIT_SAPLMEREQ_002             Prepare Customer Subscreen for Requisiti
    EXIT_SAPLMEREQ_003             Import Data from Customer Subscreen for
    Regards
    Sreeni

  • Any BADI or Screen Exit for BBP_VENDOR_CREATE in SRM?

    Any BADI or Screen Exit for BBP_VENDOR_CREATE in SRM?
    Want to add new field in "Manage Vendor Data" screen. (screen 400)

    hi,
    > Its not possible to have the authorization for PR at storage location level...
    > you can have authorisations for Puchase organisation EKORG, plantWERKS, puchase group EKGRP, puchase document type BSART ...
    > and authorisations objects are:
    >M_BANF_BSA :   Document Type in Purchase Requisition
    > M_BANF_EKG :  Purchasing Group in Purchase Requisition
    > M_BANF_EKO :  Purchasing Organization in Purchase Requisition
    > M_BANF_FRG :  Release Code in Purchase Requisition
    > M_BANF_WRK :  Plant in Purchase Requisition
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Apr 27, 2009 3:01 PM

  • BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE initial screen

    Hi All,
    I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.
    please provide your suggestions.

    Hi,
    here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
      DATA: faelligkeit TYPE d,
            faelligkeit_text type c length 10,
            meldungstext TYPE c LENGTH 100.
      FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
      IF sy-uname = 'XYZ'.
    *    BREAK-POINT.
        READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
          ASSIGNING <it_source>.
        faelligkeit = <it_source>-dfaell.
        CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
             DATE_INTERNAL                  = faelligkeit
           IMPORTING
             DATE_EXTERNAL                  = faelligkeit_text
           EXCEPTIONS
             DATE_INTERNAL_IS_INVALID       = 1
             OTHERS                         = 2
        IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF faelligkeit <> sy-datum.
          CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
          CALL METHOD pi_proxy_messages->set_message
            EXPORTING
              pi_message_id       = 'T0'
              pi_message_number   = '101'
              pi_message_severity = 'E'
              pi_message_var1     = meldungstext
            EXCEPTIONS
              OTHERS              = 4.
        ENDIF.
      ENDIF.
    It is not a really nice coding but it shows in a simple way how to use the BAdI.
    Regards
    Robert

  • Screen-exit for profit center creation - transaction KE51.

    Hi All,
    Background: The client has the requirement of importing profit centre master data from legacy system into SAP ECC system. Few of the legacy data could not be filled into existing sap fields, hence the requirement has been to populate the data into custom fields.
    The client also has the requirement, that the same fields are required during online entry. For this we need to enhance the profit centre creation screen (transaction code KE51) with two additional custom fields.
    Requirement: To enhance profit centre creation screen with custom fields. Screen-exit for KE51 transaction.
    Pre-work: Program SAPLRKPM in SAP ECC system is the main program. It does not have any screen or sub screen area for custom fields addition. Debugged the program to check for screen-exits, found none.
    Below user-exits are not either screen-exits or cannot be used for enhancing profit center screen.
    PCA00001  EC-PCA: Document changes for data transfer
    PCA00002  Profit Center Accounting: derivation of representative mat.
    PCA00003  Derive Partner Profit Center for External Deliveries
    PCA00004  Check valuation for invoice verification with transfer price
    PCA00005  Check valuation for invoice verification with transfer price
    PCASELEK  EC-PCA: Selection criteria for data transfer
    Solution required for: Could anyone please let me know if it is possible to enhance the profit center creation screen. If yes, please provide the names of the screen-exit/  badi exit.
    (Just a thought, modifying the standard seems to be the only solution, this should be the last option and i agree, please provide your inputs.)
    Thanks in advance.
    Warm Regards,
    Goutham.

    Thank you Manohar for the response.
    The requirement is to display custom fields on standard sap screen and there are no screen-exits. So, i suppose the standard screen has to be modified.
    Could you please provide brief explanation on
    May be you should consider maintaining custom mapping table instead of going for chaning standard.
    With Regards,
    Goutham.

  • Badi or Exit for changing subscreen in PO

    Hi Friends,
    Is there any Badi or Exit for changing shipping subscreen at item level for Purchase order.actualy my requirement is to supress all fields on shipping subscreen(Item Level) except route.How can I do it????
    Please help...

    MM06E005 - screen exits contains subscreen of PO header & Item
    AMPL0001 - this is a screen exits without field .
    use the first exit and check it.

  • Screen exit for transaction XK01

    Hi,
      I want to add a field for the transaction 'XK01'.
      How to find out the screen exit for this transaction.
      If we dont have screen exit for this transaction, is there any other way to add the field.
      Ps help regardng this.

    Hi,
    Check the BADI CUSTOMER_ADD_DATA_CS , this is used to add a tab screen with the custom fields.
    VENDOR_ADD_DATA Additional Vendor Data
    Vendor Master (XK01) Screen Exit
    check the foll link,
    userexits be..
    RFKRRANZ User exits: Accounts Payable Information System
    SAPMF02K User exits: Vendor master data
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    Regards
    Kiran Sure

  • Screen Exit for t-code F-06

    Dear All
    I have an requirement like I need to add a field in the t-code f-06, in the first screen it self, they need a field to add from the table BKPF. I have searched for any screen exits for the package FBAS, but I am unable to find out.
    Please guide me is there any other alternative way to solve this issue.
    Thanks and Regards
    Praveen Kumar

    HI,
    What ever you can achevie by using User Exit you can acheive with Badi's
    [ABAP BADI SCREEN ENHACEMENTS |http://www.*******************/2008/09/abap-badi-screen-enhacements.html]html
    [badi screen enhancements implementation |http://www.*******************/2008/10/badi-screen-enhancements-implementation.html]

  • How to Implement Screen Exits for MK01...

    Hi All,
    I have to implement screen exits for Tcode MK01.
    There is a BADI namely VENDOR_ADD_DATA_CS for Mk01.
    Please guide me on how to implement a screen exit..
    If possible send me the steps to be followed.
    Regards,
    Vidya.

    Hi,
      Check this:
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    Have a look at this thread:
    your working with BADI Then do as follows....
    you follow the SPRO way and do everything they say.
    1.you make an own z program with your subscreens
    2.by VENDOR_ADD_DATA you put something like this to method CHECK_ADD_ON_ACTIVE:
    Aktivierung Zusatzfelder für ZDB
    if i_screen_group = 'Z1'.
    e_add_on_active = 'X'.
    endif.
    3.by VENDOR_ADD_DATA_CS you put something like this to get_taxi_screen
    CASE i_taxi_fcode.
    Premier
    WHEN 'Z1_SRCE1'.
    e_screen = '0100'.
    e_program = 'ZPM_SCREENEXIT_MK02'. " your own program
    e_headerscreen_layout = ' '.
    Deuxiem
    WHEN 'Z1_SRCE2'.
    e_screen = '0110'.
    e_program = 'ZPM_SCREENEXIT_MK02'.
    e_headerscreen_layout = ' '.
    ENDCASE.
    4. you make sure, that everything is active
    Regards
    Kiran
    Edited by: Kiran Sure(skk) on Apr 11, 2008 3:42 PM

  • Screen Exit for LT12

    Hi Folks,
      I need a help regarding Screen Exit for LT12 Tcod.My requirement is to add a screen for Serial Number Keyin for a material and confirm the TO.I try to find an Exit and a Badi where i can put my Custom logic which updats the Serial Number in a Custom 'Z' Table but iam unable to stop at none of the exits .Please help me if any one had worked on this sort of an requirement. I want an Exit/Badi which stops at the time of Save or Confirm TO Ok_code

    hi vamsi,
    check the below link may be helpful for you
    User-Exit in transaction LT12
    if u find it useful plz reward the points
    Regards,
    Naveen

  • Field/Screen Exit for MIRO

    Hi Friends,
    The client requirement is to fix an Exit to disable or inactive the field INVFO-LIFRE or to put the INVFO-LIFRE field (invoice party in Details tab) as display mode where the user not able to change it while posting invouces in MIRO.
    I've tried by program screen enhancement in 'SAPLFDCB' but i couldn't able to fix it since the screen name of INVFO-LIFRE is not showing/coming while posting MIRO (checked in debugging mode).
    Instead of fixing error message through BADI/USER EXIT, is there any way to make field/screen exit to disable or inactive the filed??
    Please advise.
    Thanks & regards
    Sankar.

    Hi,
    Check the below link.
    [Screen exit for MIRO transaction;
    [Re: steps to create field exit;
    Regards
    Sunil

  • Screen exit for FB60 on header level

    hi , i am working on FB60 .  i want to add an extra tab  i.e extra screen on the header level . are there any screen exits for fb60 to add extra screen?

    hi praveen,
    search this forum on how to implement a badi if you haven't done one before. also, go to transation SE18 and read the documentation on badi_fdcb_subbas01 which clearly says that its used for FB60... see the example how they have used it by going to menubar Implementation->Overview then choose FI_FDCB_SUBBAS01_EX (Example for Screen Enhancement 1 on FDCB Basic Data Screen)...you should look at the method PUT_DATA_TO_SCREEN_OBJECT and tab Subscreens where the screen exits are available to use.
    In FB60, if you go to menubar System->Status and check the Program (Subscreen) and Screen Number, you'll see it'll match the program name and screen no. provided in the Subscreen tab of the BADI.
    Hope this helps.
    Cheers,
    Sougata.

Maybe you are looking for