BAPI for confirmation of TO

Hello all, in SAP ERP we created a warehouse with several storage types. One storage type represents an automated part within this warehouse. The TO is then the document to communicate between the warehouse and the automated part of the warehouse (this is the specific storage type).
i am looking for the bapi which we can use tot confirm the TO from the automated part of the warehouse to the warehouse itself. Can somebody help me?
Thanks and kind regsrds,
Frank van Heel

IDOC is an object in SAP, if you want to use IDOC for TO confirmation, you need to carry out some settings...
You have to go through the online help posted in my first message.
Additonally:
- overview of IDOC:
http://www.thespot4sap.com/articles/SAP_ALE_IDOCS.asp
- about IDOC settings:
IDOC Configuration

Similar Messages

  • Is there a bapi for confirming quantity on schedule line?

    Does anyone know of a BAPI for confirming the quantity on a sales order schedule line?
    Thank you,
    Justin

    I was not able to get either of these to do what I needed, so I just wrote a BDC subroutine to confirm the quantity.
    Thanks for your input!

  • IDOC/BAPI for production order confirmations

    Does anyone know IDOC or a BAPI for confirming a production order? CO11 is the normal transaction for confirmation.
    I found one BAPI: BAPI_PRODORDCONF_CREATE_HDR
    Is this the right one?
    -Thanks
    Bhaven

    Hi Bhavan,
    status can be find using function module <b>STATUS_TEXT_EDIT</b>.
    Sample code:
    CALL FUNCTION 'STATUS_TEXT_EDIT'
          EXPORTING
            client           = sy-mandt
            objnr            = >object number of order<
            only_active      = 'X'
            spras            = 'E'
          IMPORTING
            line             = hold_status
          EXCEPTIONS
            object_not_found = 1
            OTHERS           = 2.
    *Exception in case status is not found
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    *Check Status of the Order
        IF hold_status CS 'CNF'.
        confined production orders.
        ENDIF.
    Best regards
    Suresh Babu Karanam

  • BAPI for Purchase Order Confirmation and update EKES table

    Hi all,
    I have a requirement to update the PO confirmation soon after successful creation of PO in an IDOC.
    I have used BAPI_PO_CHANGE function module which didnt serve the purpose as it cannot update confirmations.
    I tried using ME_CONFIRMATION_UPDATE where I was able to add a confirmation entry in EKES table but that is not being reflected in ME23N transaction when I display the PO.
    Please help me out on this.
    Thanks & Regards
    Pavan

    NB: Never use a standard update FM (check attributes of ME_CONFIRMATION_UPDATE) its often only a SQL statement collector without any check, logging of changes or database consistency, if you perform a where-used you should find it is never called alone but with a bunch of other update FM after checks and other update preparation.
    Get back to the BAPI and table parameter POCONFIRMATION, also use BAPI_PO_GETDETAIL1 to get current data for the call of BAPI_PO_CHANGE.
    Regards,
    Raymond
    PS: If it is not in 197958 - BAPIs for purchase orders: Missing functions, you should be able to do it

  • BAPI For Process Order Confirmation

    Hi,
    For Process Order Confirmation we are using the following tcode. COR6N. in the t-code we are include a new field (Shift Field) with help of CONFPP07. and we made the field as mandatory also. in cor6n it is working fine.
    now we are using the bapi for same Process Order Confirmation. here the new field is not available. we want to include the new  ( Shift ) Field also. we are using the following
    BAPI Fm: BAPI_PROCORDCONF_CREATE_TT .
    Regards
    Sathis

    BAPI_PRODORDCONF_CREATE_TT to confirm a production Order
    Erwan

  • BAPI for Purchase Order Vendor Confirmations

    Can any body suggest me the BAPI for the purchase order vendor confirmations transaction code me22n - Tab<b>-(Confirmations)</b> alone.
    regs,
    Raja

    Dear Asha,
    Pls find the below code, this handles only the BDC part of the program.Updates only the EKES table thru standard confirmation tab on ME22N.
    Kindly clarify any doubts in this reg.
    regs,
    Raja.
    FORM ins_stdtable .
      DATA:var TYPE c LENGTH 30,
      cstr(02) TYPE n value '01'.
      data istr(02) type n value '00'.
      DATA recno TYPE i.
      data: eblc type c length 5,
      ebli type i.
      DATA: kebeln LIKE utab-ebeln.
      DATA: BEGIN OF indx,
             ebelp type ekes-ebelp,
             eindx type i,
            END OF indx.
      DATA : CNT TYPE I value 1.
      DATA: COUNTER(2) TYPE N VALUE '01',
      ROWS TYPE P.
      DATA: w_textout            LIKE t100-text.
      DATA: gd_update TYPE i,
            gd_lines TYPE i.
      data :waek like indx,
      itabek LIKE TABLE OF waek.
    *Used to stores error information from CALL TRANSACTION Function Module
      DATA: BEGIN OF messtab OCCURS 0.
              INCLUDE STRUCTURE bdcmsgcoll.
      DATA: END OF messtab.
      SELECT MAX( ETENS ) FROM ekes INTO zetens WHERE ebeln =
      ekko-ebeln.
      recno = zetens.
      LOOP AT utab.
        SELECT distinct ebelp INTO CORRESPONDING FIELDS OF TABLE
        itabek  FROM eket  WHERE ebeln = ekko-ebeln.
        loop at itabek into waek.
          ebli =  ebli + 1.
          waek-eindx = ebli.
          modify itabek from waek.
        endloop.
        loop at itabek into waek where ebelp = utab-ebelp.
          eblc = waek-eindx.
          condense eblc.
        endloop.
        AT NEW ebeln.
          PERFORM bdc_dynpro      USING 'SAPLMEGUI' '0014'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=MECHOB'.
          PERFORM bdc_dynpro      USING 'SAPLMEGUI' '0002'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=MEOK'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'MEPO_SELECT-EBELN'.
          PERFORM bdc_field       USING 'MEPO_SELECT-EBELN'
                                         utab-ebeln.
          AT New EBELP.
            perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
            perform bdc_field       using 'BDC_CURSOR'
                                      'DYN_6000-LIST'.
            perform bdc_field       using 'DYN_6000-LIST'
                                     eblc.
            perform bdc_field       using 'BDC_OKCODE'
                                          '=DDOWN3200'.
            PERFORM bdc_dynpro      USING 'SAPLMEGUI' '0014'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          '=TABIDT15'.
            perform bdc_field       using 'DYN_6000-LIST'
                                    eblc.
            PERFORM bdc_dynpro      USING 'SAPLMEGUI' '0014'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          'PICK'.
          ENDAT.
        ENDAT.
        PERFORM bdc_field       USING 'DYN_6000-LIST'
                                          eblc.
        recno = recno + 1.
        cstr = recno.
        counter = cstr.
    *This is to check whether the scheduled line item exceeding 12 rows. if so, use *page up
        if counter >= 13.
          rows = counter MOD 13.
          istr = ( ( counter - rows ) / 13 ).
          do istr times.
            perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
            perform bdc_field       using 'BDC_OKCODE'
                                    '=EINB_CREATE'.
          enddo.
          DO 2 TIMES.
            perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
            perform bdc_field       using 'BDC_OKCODE'
                                    '=P+'.
          enddo.
          COUNTER = '03'.
          cstr = '03'.
        ENDIF.
        CONCATENATE 'EKES-EBTYP('  cstr  ')' INTO var.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                          var.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
        PERFORM bdc_field       USING var
                                    utab-ebtyp.
        CONCATENATE 'RM06E-EEIND('  cstr  ')' INTO var.
        PERFORM bdc_field       USING var
                                       utab-eeind.
        CONCATENATE 'EKES-MENGE('  cstr  ')' INTO var.
        PERFORM bdc_field       USING var
                                       utab-menge.
        CONCATENATE 'J_3ASZDI-J_3ASIZED('  cstr  ')' INTO var.
        PERFORM bdc_field       USING var
                                       utab-j_3asize.
        AT END OF Ebelp.
          PERFORM bdc_dynpro      USING 'SAPLMEGUI' '0014'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=MESAVE'.
          perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
          perform bdc_field       using 'BDC_OKCODE'
                                    '/00'.
          CALL TRANSACTION 'ME22N' USING bdcdata MODE 'E'.
          IF sy-subrc EQ 0.
            savedone = 'Y'.
            saveflag = 'Y'.
            initflag = 'N'.
            MESSAGE 'SAVED' TYPE 'I'.
          else.
            saveflag = 'N'.
            savedone = 'N'.
            initflag = 'Y'.
            MESSAGE 'Not Saved' Type 'I'.
          endif.
          CLEAR: bdcdata.
          REFRESH bdcdata.
        ENDAT.
      ENDLOOP.
    ENDFORM.
    Hope this will help u

  • BAPI for Mass Purchase Order Confirmation

    Dear All,
    In standard SAP,it is possible to confirm for single line item only by using confirmation tab.
    We want to confirm Mass PO Confirmation.
    Is there any BAPI for Mass Purchase Order Confirmation?
    Regards,
    Ramesh

    Hi Sumant,
    I have tried with TC:MASS.
    By using this TC we can update quantity but not  delivery date & Confirmation Control (Fields available in the confirmation tab of ME22n for Vendor Confirmation).
    Is there any way to updates all these fields which are available in the Confirmation Tab?
    Is there any BAPI which is tranferring confirmation tab details into EKES table?
    Expecting your valuable inputs in this regard.
    Regards,
    Ramesh

  • Bapi for CRM service confirmation

    Hi All,
      Is there any bapi for CRm service confirmation which done trhough the transaction - CRMD_BUS2000117.
    Its urgent.
    Points will be awarded.
    Reagrds,
    vinoth.

    Hello Vinoth,
    please ask that kind of questions in the SAP CRM: Webclient UI - Framework Forum.
    What's about using CRM_ORDER_MAINTAIN? You can find many examples of it's use using the SDN search.
    Regards
    Gregor

  • Any function module or BAPI for PM order confirmation

    Hi all,
    I'm trying to confirm a PM order (IW41) background. Is there any existing BAPI or FM for me to do that? Thanks in advance.

    Mil,
    check this
    BAPI_PRODORDCONF_CREATE_TT,
    below are other ones which may use for you...
    BAPI_PRODORDCONF_CREATE_ACT Enter Activity Confirmation
    BAPI_PRODORDCONF_CREATE_HDR Enter Order Confirmations
    BAPI_PRODORDCONF_CREATE_TE Enter Time Event Confirmation
    BAPI_PRODORDCONF_CREATE_TT Enter Time Ticket Confirmation
    BAPI_PRODORDCONF_EXIST_CHK Existence Check for Confirming Production Order
    BAPI_PRODORDCONF_GETDETAIL Detailed Data for Production Order Confirmation
    BAPI_PRODORDCONF_GETLIST Confirmations List
    Don't forget to reward if useful....

  • Bapi for Process service confirmation in transaction - CRMD_BUS2000117

    Hi All,
       Is there any bapi for process service confirmation in CRM system.
       Tcode for service confirmation - CRMD_BUS2000117.
    Points will be awarded.
    Regards,
    Vinoth.

    Hello Vinoth,
    please ask that kind of questions in the SAP CRM: Webclient UI - Framework Forum.
    What's about using CRM_ORDER_MAINTAIN? You can find many examples of it's use using the SDN search.
    Regards
    Gregor

  • BAPI for Service Orders Confirmation

    Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
    Thank you

    To create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
    Regards,
    Animesh

  • BAPI/FM for Confirmation of Production order at operation level

    Hi ABAPers,
    I am using the 'BAPI_PRODORDCONF_CREATE_ACT'for Confirmation of Production order at operation level.
    I am able to pass the Production order number and Active Operation get the confirmation done.
    But the Confirmed Qty is not being updating in AFKO table.
    The 'BAPI_PRODORDCONF_CREATE_HDR' cannot be used for Confirmation of Production order at operation level as there is no Operation/Activity(Vornr) field in the input table. Hence using this bapi confirmation of Prod order can be only at Order level.
    Can someone know any FM/BAPI which can be used for the Confirmation of Production order at operation level(not order level).
    Thanks in Advance
    Ramesh Babu Cikka

    Hi Ramesh,
    Please use FUNCTION 'BAPI_PRODORDCONF_CREATE_TT'.
    This will work as like as T/Code "CO11".
    I hope this will help you.
    Example :
      CALL FUNCTION 'BAPI_PRODORDCONF_CREATE_TT'
        EXPORTING
          POST_WRONG_ENTRIES = '0'
          TESTRUN            = ' '
        IMPORTING
          RETURN             = ZRETURN
        TABLES
          TIMETICKETS        = ZBAPI_PP_TIMETICKET
          DETAIL_RETURN      = ZBAPI_CORU_RETURN.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT = 'W'.
    Lanka

  • BAPI for change PO confirmation date

    Hi,
    Does anyone know a bapi or a function module for change the confirmation date of one item of a purchase order ( that changes the field EINDT of table EKES ) ?
    I need to change it according to goods receipt date.
    Thanks in advance,
    Paulo Sousa

    you can use BAPI_PO_CHANGE
    In particular you would be interested in schedule line table POSCHEDULE in the function interface and the field for confirmation date is DELIVERY_DATE.
    Also you need to pass the BAPI some header fields like PO number etc and item fields liek material number etc along with the POSCHEDULE structure.
    Also remember to mark X in POSCHEDULEX for corresponding field POSCHEDULEX-DELIVERY_DATE, so that the change will be transferred to the PO in database.
    Also this BAPI can auto COMMIT
    Hope this helps

  • BAPI for Order Confirmation along with measurement reading entry

    Hello Experts,
    I would like to know if there is any BAPI for PM Order completion Confirmation along with measurement reading entry?
    Thanks in advance.

    [BAPI for TECO|Function Module for TECO(technically complete) a maintenance work order;
    [BAPI to create Measurement document|BAPI or Function Module for creating measuring point;
    Based on the business transaction, by using user exit, you can accomplish these.

  • Fm or bapi for service order confirmation (iw41)

    hi,
    Can you please tell me a fm or bapi for service order confirmation in iw41

    HI dido...
    you can use CRM_ORDER_MAINTAIN.
    you can process any document type you want
    regards
    Marco

Maybe you are looking for