BAPI for document tab of business partner

In Business Partner we have Documents tab. At document tab We can attach some URL
or some document. Please tell me the BAPI for this functionality.

Hi Anupam,
FM SKWV_KWUI_DOC_CREATE requires PACKAGE_ID as mandatory Import Parameter. Do you know how to determine its' value and what does this parameter represent?
Thank you in advance,
Maro

Similar Messages

  • Error - No GL account selected for Asset account in Business partner master

    Hi Experts,
    Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
    Awaiting your replies
    Regards,
    Sid

    Hi,
    You need to map the control account of that vendor(business partner).
    ->Open the respective Business Partner master data
    ->Under accounting tab
    ->Under General tab
    ->Control accounts (will be indicated with ... button),on opening this
    ->You will be prompted to map the control accounts
                                             ^ Down Payment Payables
                                             ^Assets Account
                                             ^Open Debts
    Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
    Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
    Hope this is helpful

  • How to add a New Tab in Business Partner Transaction

    Hi Friends,
    Please help me out to "How to add a new Tab in Business Partner Transaction?
    Regards,
    Ricky

    Hi Rajendra,
    It will be gratefull to have some EEWB docuement.Can you please forward me ?
    Regards,
    Ricky
    Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM

  • Adding a  additonal TAB in Business partner Overview ( Tr : FMCACOV)

    Dear Experts,
    I am working ECC6.0 system.I have to add a additional TAB in a TABstrip for a screen (FMCACOV:Business partner overview).
    The Program for the transaction is RFMCA_COV. Please let me know the steps to proceed for these.
    Thanks in Advance.
    Regards,
    Sudhira

    Hello,
    The following MAY be useful to you.
    https://www.****************/Tutorials/ABAP/Tabstrips/Selectionscreen.htm
    Rgds
    Rajendra

  • No G/L account selected for Asset Account in Business Partner Master Data

    Hi All,
    When i tried to raise A/P invoice for an Asset Item the system is raised the following error"  why?
    " No G/L account is selected for Asset Account in Business Partner master data "
    thanks
    SV Reddy

    hi Giri,
    When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only.  which one to choose in this case?  i presume trade creditors account is the one to choose.  but what is the logic for asset items to choose this Trade Creditors Account?   Or  else can we create a separate control account for purchasing the Asset items?  what is the logic again here choosing a separate account through option create new ?
    thanks
    SV Reddy

  • LSMW what BAPI to use to load Business Partner?

    Could anyone tell me what BAPI to use for business partner? i think its part of CRM..... I'll work out what a BAPI is later! But i gather batch recording is not the go?
    I don't know anything about SAP, BAPIs and Idocs and Batch recordings!!! I have a number of flat files, I want to import please show be some direction, would be appreciated.
    mike

    Thanks,
    Yes we have used the recording tool and actually loaded one file in the SAP system, as a test, however we have fields in "tabs" ie one customer has many phone numbers - a multi structure record. I believe the recording tool is no good for such cases!
    I'm not sure whether I have need to have one input file or whether I need to have two files one for cutomer and another for phone details.
    The 2nd question is my original question what BAPI or other method can I use for customer (business partner) details, as the recording method is no good for data with 1 to many relationships. HELP!

  • Hiding a field in Address tab of Business Partner Using BDT

    Hi,
    I want to Hide the title field in the Business Partner transaction, which exists in the Address Tab using BDT.
    Could you please let me know whether i need to create a custom screen for this or is there any other way where we can modify the predefined screen directly?
      Kindly help me regarding.
    Thanks and Regards,
    Gopi.

    Hi Gopinath,
    Please go through this link..,
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/696d360856e808e10000009b38f839/frameset.htm
    This is the introduction regarding BDT ( Business Data Toolset)
    Here you will find some information, I think it may help you.
    Cheers,
    Swamy Kunche

  • How can i add new tab in Business Partner

    hi every body,
    Present i am working on SAP CRM 3.0 version. i need to add new tab in BP.  Here EEWB not available. How can i add new tab?

    Hi  babu,
    you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence  and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
    now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
    i hope this is helpful
    Rewards points if helpful
    Thanks&regards
    kishore kumar

  • Upload LSMW for Grant Master and Business Partner

    Hi,
    Does anyone have LSMW' for uploading business partners and Grants
    A basic one can be shared. I will build up on that in terms of adding fields etc...
    Regards
    Anish

    Hi,
    As both the Grant master and the business partner have tables in several screens, using LSMW is not recommended.
    For the grant master record I'd use BAPI_0035_CREATE - Works better and faster.
    LSMW cannot support complicated scenarios, such as adding an alternating number of sponsored classes per grant (for example - one grant has 3 classes and another has 4 classes). The BAPI can solve such problems.
    Best regards,
    Shahaf Yaari

  • Tabs in Business Partner Master Data

    One customer of us demands some changes within the Business One.
    The support in Ireland advised us to post this requirements in this Forum.
    There are 8 Tabs within the Business Partner Master Data.
    But if you open the Master Data and try to search for the city for example, this is not possible, because three tabs are missing in search mode.

    Hi Kiran,
    Can you post the query here, which you used in fromatted search.
    I believe you mean to say that by this formatted search, user will have flexibility to choose the field and enter the search value.
    thanks in advance,
    Samir Gandhi

  • Add new folder/tab into business partner master data form

    Hi, All
    Please show code example: Add folder/tab "business partner master data" form
    add tab folder into "Accounting" this sub folder "General", "Tax", "Example Folder" <=
    Thank  you
    Mdiaw

    Welcome to the forums; this has been covered in lots of posts here so if you do a search you will find lots of replies:
    e.g
    Re: Adding subFolders under a Main Folder
    or
    Add new tabbed page
    or
    Re: Folder within Folder
    or many other returned by searching for "add folder"

  • Multiple Output Medium for vendors in Manage Business Partner

    Hi,
    I'm trying to put more than one output medium in Manage Business Partner for a Vendor, Transaction BBPMAININT.
    But unable to do so.
    1. I would need assisstance that is it right to have multiple output medium for a Vendor functionally?
    2. How do i achieve it.
    Waiting for a quick response,
    Regards,
    Neha Misra.
    Edited by: Neha Misra on Mar 28, 2008 1:18 PM

    You can maintain Alternate Vendor Contact for the Vendors in the transaction BP; The Purchaser here after can choose which one to use during a particular time of the ordering the purchase order. This will be possible for the purchaser at the time of creating the purchase order in the Basic Data Tab - Alternate Vendor Contacts.
    For every vendor contact you will need to have a default medium for output; which will be used to send the PO to the vendor.
    Please reward points if found useful.
    Thanks
    Kasee Palaniappan

  • BAPI to Update Title of Business Partner ( Table BUT000 )

    Hi
    Which BAPI can be used to Update the TITLE field of Business Partner ( Table BUT000 ) ?
    Warm Regards
    Moderator message - this forum is not meant to replace research that can be EASILY done by the OP.  Please read the Research Resources and Rules of Engagement sticky for links.
    Edited by: William Eastman on Nov 16, 2009 2:59 PM

    BAPI_ISUPARTNER_CHANGE
    Use this bapi
    pass corresponding X in PARTNERDATAX along with PARTNERDATA
    Regards,
    Prajakta

  • Collection Specialist - Collections Profile Tab of Business Partner.

    Hi,
    We are using the SAP FSCM Collections Management module. When I assign the collection profile to the Business Partner on the Collections Profile Tab, the Collection Segment, Collection Group are populated based on the configuration but the Collections Specialist does not get populated.
    Can someone please throw some light on this if they have experienced this issue?
    Thanks & Regards,
    Bhairav Naik.

    Hello Mark , actually I dont think that is possible to transfer data related to collection profile (displayed in BP master data for a BP with colletion managemnt role) from Cusotmer master data because this kind of information are not availabe as my knowledge in Cusotmer master
    Solution could to transfer all other available data from Cusotmer data to BP and once transferred update mannually the collection profile.
    I have seen also a program ( transaction UDM_BP_PROF) to update collection profile automatically, but I did not manage to make it work on a exidting BP.
    What do you think about this approach?

  • Description for document tab in EQ master

    Hello,
    how can I add a description to the document tab in the equipment master. Right now it's just displaying an icon there.
    Thanks for you help.
    Best regards, Paul.

    hi
    Follow the path IMG>PM/CS>Master Data in Plant Maintenance and Customer Service>General data>Set View Profiles for Technical Objects.
    in the path for your profile of equipment select Icons and texts of views in the left side screen where you can define the description for the same
    regards
    thyagarajan

Maybe you are looking for