BAPI_GOODSMVT_CREATE return with M7 300 Error?
I try to create goods movement with function 'BAPI_GOODSMVT_CREATE'
as following:
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_gmvtheader
goodsmvt_code = gmcode
TABLES
goodsmvt_item = gmvtitem
return = wa_re.
But I get return error message always with M7 300 "No items were transferred"
If I in SE37 test it with same data, it will generate correct material document. Which part wrong?
Thanks for all suggestion.
check this code
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
errflag.
data: begin of pcitab occurs 100,
ext_doc(10), "External Document Number
mvt_type(3), "Movement Type
doc_date(8), "Document Date
post_date(8), "Posting Date
plant(4), "Plant
material(18), "Material Number
qty(13), "Quantity
recv_loc(4), "Receiving Location
issue_loc(4), "Issuing Location
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
del_no(10), "Delivery Purchase Order Number
del_item(3), "Delivery Item
prod_doc(10), "Production Document No
scrap_reason(10), "Scrap Reason
upd_sta(1), "Update Status
end of pcitab.
call function 'WS_UPLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
itab-move_type, itab-entry_qnt, itab-entry_uom,
itab-entry_uom_iso, itab-po_number, itab-po_item,
pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
TESTRUN = ' '
IMPORTING
goodsmvt_headret = mthead
MATERIALDOCUMENT =
MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
else.
write:/ mthead-mat_doc, mthead-doc_year.
perform upd_sta.
endif.
endif.
FORM UPD_STA *
form upd_sta.
loop at pcitab.
pcitab-upd_sta = 'X'.
modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
endform.
Similar Messages
-
Hi,
We are installing Dialog instance of CRM 5.0 on windows 2003 server. Central instance is located on AIX 5.3 server. Database we are using is DB2. During the installation first 8 steps out of 10 have been successfully. We are facing error in "Install Instance Basics" step. Service not started is the message.
Errors are as under:
ERROR 2007-10-12 13:03:57
MOS-01011 'E:/usr/sap/PND/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2007-10-12 13:03:57
MOS-01011 'E:/usr/sap/PND/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2007-10-12 13:03:57
FCO-00011 The step createService with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
Please help.
Rgds,
- gauravHi,
we were having the very same problem, and after a while we figured it out.
Check if user SAPServiceJ2E and user j2eadm are part of the group Administrators in your windows (in windows2000 look for computer manager/local users and groups)
In our case they weren't, we add them to Administrators group and bypassed this error.
I hope this helps you out.
Regards,
Laura -
Apex Listener return blank pages with no configuration errors!
- I set up an Apex Listener "Version:1.1.3.243.11.40" at "10.0.114.11" in standalone mode.
- I configured Apex Listener via http://10.0.114.11:8585/apex/listenerConfigure and return with no errors.
- I get http://10.0.114.11:8585/apex/listenerStatus, it returned this:
Current Time: Tue Dec 13 17:06:32 ICT 2011
Server Uptime: 0 Days 01:10:14.101
Total Accesses: 38.0
Total Traffic: 161.34K
Total Errors: 0
Total File Downloads: 0
Total Processing Time: 0 Days 00:00:09.354
Processing Time in milliseconds: Minimum: 20 Average: 246 Median: 64 Maximum: 3062
Database Time in milliseconds: Minimum: 14 Average: 61 Median: 50 Maximum: 204
Active Requests: 0
Connections in the pool apex:
Active: 0 Available: 1
But when I go to "http://10.0.114.11:8585/apex" or "http://10.0.114.11:8585/apex/apex_admin", I got blank pages.
The page displays "Application Express Login" or "Application Express Administration Services" in the tab at the top of IE, but nothing else. Anyone have any ideas what could be happening here ?
thanks so much,Hi Udo!
I run apex_listener with this below command and the output is that:
java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war
INFO: Starting: /source_install/apex_listener.1.1.3.243.11.40/apex.war
See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: /tmp/apex
INFO: Using classpath: file:/tmp/apex/apex/____embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar:file:/tmp/apex/apex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:
INFO: Starting Embedded Web Container in: /tmp/apex
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: Will deploy application path=/tmp/apex/apex/WEB-INF/web.xml
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: deployed application path=/tmp/apex/apex/WEB-INF/web.xml
Using config file: /tmp/apex/apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.3.243.11.40
APEX Listener server info: Grizzly/1.9.18-o
Dec 13, 2011 6:40:23 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Tue Dec 13 18:40:23 ICT 2011
INFO: http://localhost:8585/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
I don't know how to "could you please check if you configured the directory for the static contents ("images") correctly"
because the Installation Guide of Oracle about Install Apex in standalone mode do not tell me to configure images any more. I just run apex listener with above command "java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war".
Thank you for your reply,Udo! -
Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help
Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/ -
Ecc6.0 , po return with excise using cst some error is showing in the po
hai all
i am facing one problem in the return po with excise. i entered vendor and line items and selected the return tick mark
when i was clicking the return tick mark this error is showing "
Negative delivery costs not allowed". This is releated with exicise and cst . please help me out how to processed for this return po .
jcdb,jcv1 and cst
raviDuring normal PO, the condition type is taking as +ve and the accounting doc posting is correct during GR and LIV.
However, during return PO, we would like to have the same flow except that it is posting reversely from the normal PO. that is why we need the condition type to be -ve. The condition type is using conditiong category 'B' delivery costs. Check Plus/minus setting in M/06.
Regards,
Sandesh Sawant -
OPatch returns with error code = 170
Performing Critical Patch Update (April 2007), attempting to run opatch apply when the following error is encountered:
"OPatch returns with error code = 170"
Note: Directory is a numberThis is my understanding of how the two primary software sets act. I'll break it down through a series of step I use to form a worksheet created every time a CPU comes out. This is on a Windows platform but I suspect it is similar if on xxIX; also, these patch numbers are for 10gDB/AS R1; yours will likely vary.
1. Database server
a. Download patch 5907304 zip to d:\temp
b. Unzip to d:\temp ==> creates d:\temp\5907304
c. Change directory to d:\temp\5907304
d. run Opatch
2. App server
a. Down load patch 5922119 zip to d:\temp
b. Unzip to d:\temp ==> creates d:\temp\5922119
c. Change directory to d:\temp\5922119\5922119
d. run Opatch
Database and App server have a slightly different nuance in arriving at the correct directory. Regards, John -
Error Issue: enable clock spreading returned with 0 sh-2.05a#
Hi I am having some serious issues with my laptop. I believe hat it is having overheating problems and freezes constantly. Lately it gave me error: enable clock spreading returned with 0 sh-2.05a# when I start up and cannot get beyond the gray screen! I am desperate what can I do? I have searched a lot of these posts and cannot find any resolution. Help me please! Thank you in advance!
powerbook G4 Mac OS X (10.2.x)I am having the exact same problem - my Dad gave me this computer in December and we have been trying to convert our knowledge base from PC!!! confused...
here is the copy and paste from the crash log:
Process: Finder [1760]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier: Finder
Version: ??? (???)
Code Type: PPC (Native)
Parent Process: launchd [118]
Date/Time: 2008-03-03 15:21:43.551 -0500
OS Version: Mac OS X 10.5.2 (9C31)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __CSDeviceSupportsODisk
Referenced from: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Expected in: /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
Monday, March 3, 2008 3:47:53 PM US/Eastern
can you help? -
Hi, I'm installing the SAP R3SETUP version 4.6c and Sun 10 with Oracle as DB and my new issue is when I execute..
./R3SETUP -f CENTRAL.R3S
>> Extracting the Database-Dependent SAP system Executables
>>
>> MM-DD HH:MM:SS EXTRACTSAPEXE_IND_IND InternalInstallationDo:0
>> /<My installation directory>/SAPCAR returns with error 139.
In advance thank you.Hi,
You can manually extract the SAPEXEDB.SAR ...
First copy .SAR (file you want to extract) and SAPCAR file in /sapmnt/SID/exe (in the kernel directory)
Then go to /sapmnt/SID/exe and give the following command
SAPCAR -xvf SAPEXEDB.SAR
if it fails at SAPCAR
then rename existing SAPCAR to SAPCAR1
then use the below command
SAPCAR1 -xvf SAPEXEDB.SAR
it will work...
Regards.
Rajesh Narkhede -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
I've been unable to use iTunes for over 3 weeks now.
Initially, it would prompt me to Sign In with my Apple ID and password each time it tried to start, and when I clicked Sign In, it'd respond with variations of:
"Your device or computer could not be verified. Contact support for assistance."
or
De-authorize/Authorize.
Frustrated, I'd click Cancel, and it'd crash with:
"An unknown error occurred (-1008)."
or
"An unknown error occurred (-50)."
More recently, I don't even get the Sign In prompt any more. iTunes now just crashes immediately with unknown error (-50) as soon as it tries to start.
It is clear that this issue has more to do with the Apple ID than with iTunes specifically, because some of the apps I purchased directly from the App Store (OmniFocus, Fantastical and Forismatic) now prompt me to Sign In with my Apple ID and password each time they try to start, and they never did before. And when I try to sign, they respond with the error:
"Your device or computer could not be verified. Contact support for assistance."
Apparently, this is an issue a whole lot of people are experiencing, judging by the long list of Google search returns on the subject; but I'm yet to find a definitive, "official" Apple solution to the problem.
My Apple ID is the same as it's always been.
If anyone knows what's really causing this and/or can offer a fix, please H-E-E-E-L-P? I'll even pay to make it go away. I abandoned Windows after 26 years, only to discover that no platform is spared the blackhole of unknown errors.
-- Chima.iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes
-
Creating database problem with ORA-01519: error while processing file '' ne
Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek -
R3load export of table REPOSRC with lob col - error ora-1555 and ora-22924
Hello,
i have tried to export data from our production system for system copy and then upgrade test. while i export the R3load job has reported error in table REPOSRC, which has lob column DATA. i have apsted below the conversation in which i have requested SAP to help and they said it comes under consulting support. this problem is in 2 rows of the table.
but i would like to know if i delete these 2 rows and then copy from our development system to production system at oracle level, will there be any problem with upgrade or operation of these prorgams and will it have any license complications if i do it.
Regards
Ramakrishna Reddy
__________________________ SAP SUPPORT COnveration_____________________________________________________
Hello,
we have are performing Data Export for System copy of our Production
system, during the export, R3load Job gave error as
R3LOAD Log----
Compiled Aug 16 2008 04:47:59
/sapmnt/DB1/exe/R3load -datacodepage 1100 -
e /dataexport/syscopy/SAPSSEXC.cmd -l /dataexport/syscopy/SAPSSEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: Export without hintfile
(NT) Error: TPRI_PAR: normal NameTab from 20090828184449 younger than
alternate NameTab from 20030211191957!
(SYSLOG) INFO: k CQF :
TPRI_PAR&20030211191957&20090828184449& rscpgdio 47
(CNV) WARNING: conversion from 8600 to 1100 not possible
(GSI) INFO: dbname = "DB120050205010209
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname
= "dbttsap "
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "dbttsap"
(GSI) INFO: release = "2"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "00C8793E4C00"
(GSI) INFO: instno = "0020111547"
(DBC) Info: No commits during lob export
DbSl Trace: OCI-call 'OCILobRead' failed: rc = 1555
DbSl Trace: ORA-1555 occurred when reading from a LOB
(EXP) ERROR: DbSlLobGetPiece failed
rc = 99, table "REPOSRC"
(SQL error 1555)
error message returned by DbSl:
ORA-01555: snapshot too old: rollback segment number with name "" too
small
ORA-22924: snapshot too old
(DB) INFO: disconnected from DB
/sapmnt/DB1/exe/R3load: job finished with 1 error(s)
/sapmnt/DB1/exe/R3load: END OF LOG: 20100816104734
END of R3LOAD Log----
then as per the note 500340, i have chnaged the pctversion of table
REPOSRC of lob column DATA to 30, but i get the error still,
i have added more space to PSAPUNDO and PSAPTEMP also, still the same
error.
the i have run the export as
exp SAPDB1/sap file=REPOSRC.dmp log=REPOSRC.log tables=REPOSRC
exp log----
dbttsap:oradb1 5> exp SAPDB1/sap file=REPOSRC.dmp log=REPOSRC.log
tables=REPOSRC
Export: Release 9.2.0.8.0 - Production on Mon Aug 16 13:40:27 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit
Production
With the Partitioning option
JServer Release 9.2.0.8.0 - Production
Export done in WE8DEC character set and UTF8 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table REPOSRC
EXP-00056: ORACLE error 1555 encountered
ORA-01555: snapshot too old: rollback segment number with name "" too
small
ORA-22924: snapshot too old
Export terminated successfully with warnings.
SQL> select table_name, segment_name, cache, nvl(to_char
(pctversion),'NULL') pctversion, nvl(to_char(retention),'NULL')
retention from dba_lobs where
table_name = 'REPOSRC';
TABLE_NAME | SEGMENT_NAME |CACHE | PCTVERSION | RETENTION
REPOSRC SYS_LOB0000014507C00034$$ NO 30 21600
please help to solve this problem.
Regards
Ramakrishna Reddy
Dear customer,
Thank you very much for contacting us at SAP global support.
Regarding your issue would you please attach your ORACLE alert log and
trace file to this message?
Thanks and regards.
Hello,
Thanks for helping,
i attached the alert log file. i have gone through is, but i could
not find the corresponding Ora-01555 for table REPOSRC.
Regards
Ramakrishna Reddy
+66 85835-4272
Dear customer,
I have found some previous issues with the similar symptom as your
system. I think this symptom is described in note 983230.
As you can see this symptom is mainly caused by ORACLE bug 5212539 and
it should be fixed at 9.2.0.8 which is just your version. But although
5212539 is implemented, only the occurrence of new corruptions will be
avoided, the already existing ones will stay in the system regardless of the patch.
The reason why metalink 452341.1 was created is bug 5212539, since this
is the most common software caused lob corruption in recent times.
Basically any system that was running without a patch for bug 5212539 at some time in the past could be potentially affected by the problem.
In order to be sure about bug 5212539 can you please verify whether the
affected lob really is a NOCACHE lob? You can do this as described in
mentioned note #983230. If yes, then there are basically only two
options left:
-> You apply a backup to the system that does not contain these
corruptions.
-> In case a good backup is not available, it would be possible to
rebuild the table including the lob segment with possible data loss . Since this is beyond the scope of support, this would have to be
done via remote consulting.
Any further question, please contact us freely.
Thanks and regards.
Hello,
Thanks for the Help and support,
i have gone through the note 983230 and metalink 452341.1.
and i have ran the script and found that there are 2 rows corrupted in
the table REPOSRC. these rows belong to Standard SAP programs
MABADRFENTRIES & SAPFGARC.
and to reconfirm i have tried to display them in our development system
and production system. the development systems shows the src code in
Se38 but in production system it goes to short dump DBIF_REPO_SQL_ERROR.
so is it possible to delete these 2 rows and update ourselves from our
development system at oracle level. will it have any impact on SAP
operation or upgrade in future.
Regards
Ramakrishna ReddyHello, we have solved the problem.
To help someone with the same error, what we have done is:
1.- wait until all the processes has finished and the export is stopped.
2.- startup SAP
3.- SE14 and look up the tables. Crete the tables in the database.
4.- stop SAP
5.- Retry the export (if you did all the steps with sapinst running but the dialogue window in the screen) or begin the sapinst again with the option: "continue with the old options".
Regards to all. -
Report ending in warning with status 127 error
Hi,
We ran a concurrent report with Print options set for a custom report.
The report is ending in warning with the below error:
------------- 1) PRINT -------------
Printing output file.
Request ID : 356879180
Number of copies : 1
Printer : ABSC_5WCC_HP9
/bin/sh: jforasnd: not found.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 127
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 127.
Action: Review your concurrent request log file for more detailed information.
Please suggest how to overcome this error.
Regards
Siva GPlease see your other thread -- Re: Concurrent report ending in warning with status 127 (post upgrade to R12.1.
-
Hi All,
We are trying create sales returns with Invoice. But system is not copying the free goods item. I have checked relevant item category determination and Copy controls, everything is looking fine for me.
Please let know if any other settings are required.
I am getting below meeage.
Item category for item 000021 cannot be determined
Item 000021 is not copied from the refer
document.
Thanks.Hi radha
Say you have created a creditmemo with G2 document type and you are getting a item category of G2N , so check the item category TANN is available or not with G2 doctype and item category G2N in VOV4 .Check in copy control wheather the item category is available or not in VTLA . I suppose it is not there that is the reason you were getting error.
Maintain item category data at copy control VTLA then your problem will be solved
Regards
Srinath -
Hi,
I renewed my Offline Root CA and now trying to publish the CRL to AD on my Sub Issuing CA with the Certutil -dspublish command, however I get a 'Certutil: A referral was returned from the server' error. Kinda makes sense cause the Offline Root CA is
not on the network, so then how do I publish my renewed CRL to AD given this?
Thanks for your help! SdeDotLooks like your CRL do not include Active Directory container specification and certutil don't know where to publish the CRL.
Does root CA define LDAP url in CDP extension? If not, then you don't need to publish CRL in Active Directory, because no one will use it.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.
Maybe you are looking for
-
there are four apps for my son on my ipad, that the itunes store will not let me purchase from my ipad thru the app or on it. it wont let me buy the whole app so my lil one can enjoy. i have tried everything. i have updated everything and restarted e
-
How to stop the information bar cmoing in the Internet Explorer with java
hai all, iam new to this forum and posting a question on java application where i had a problem. I work in a software company. we have developed an application and it is in production and we had a small problem. we have deifferent kinds of reports te
-
Creating iViews Based on Remote Portal Component iViews
Hi, Does anybody know if Portal 7.0 EHP 2 supports creating a local iview for a remote transactional iview? I saw this SAP Help link, but it is not really clear on Transactional iviews. http://help.sap.com/saphelp_nw70ehp2/helpdata/en/f7/34fe869
-
SAP IS Auto training needed at bangalore
SAP IS Auto training needed at bangalore
-
How can I enable OpenGL in Photoshop? I already enable OpenCL, but I still can't open 3d obj