BAPI values in the Webdynpro dropdownbox

Hi All,
Is there a way to get the BAPI values in the Webdynpro dropdownbox?
Thanks in advance,
Pravin

Hi Pravin,
Check this links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c
set leadselection for dropdown by key
When do you Use Dropdown by Index and Key
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8b7059da-0c01-0010-e09c-9ecabaf58864
Regards,
Mithu

Similar Messages

Calling and displaying BAPI values when the initial view is displayed

hi Gurus,
I am creating an application where I am calling a BAPI.
Now my problem is that the values should be called and displayed when I am starting the application ie in the first view itself.
Is there any way to execute the BAPI so as to retrieve the values from back end and get the values displayed in the initial screen/view.
Or else is there any onPageLoad method which can be used in such cases.
please help me how to go ahead.
Thanks and regards,
kris

Hi
Create a method in controller and insert the code,
wdContext.current<BAPI>Element().modelObject().execute();
And call the method in view, and check the size of BAPI's output node.If it is greater than 0, your BAPI is returning something. using any loop and get the Output
Saravanan K

How to upgrade the second dropdownbox when selecting the values of the first ?

Hello everyone, I am new to programming. Tell me, please, how to automatically load the new values in the second dropdownbox, depending on the choice of the values in the first dropdownbox ?

There is an example here...
http://www.scriptsrus.talktalk.net/Run%20Action.htm

Passing a context value to BAPI Import parameter in WebDynpro!

Hi All,
I have a small doubt here!
I am trying to create a sales order using Webdynpro through BAPI.
There i want to hard code the value of order type like, i want to fix the value before running the porgram itself i.e., statically i want to pass the value.
What i have done is,
created a Context variable and has assigned the value in the init() of view like,
wdContext.currentUIElementsElement().setDocType("ZORD")
and also changed the value attribute of InputField to the context variable called "DocType".
But now we need to pass this context value to the BAPI Structure called ORDER_HEADER_IN i.e, to the class "Bapisdhd1". with out the hardcode value it is working, but i want to pass the value before executing it self. so What i can do, can any body pls give sample line of coding.
Thanks in advance,
Regards,
Sireesha.B

Hi
Have you bound instantiated the Bapi class?If not then do like this.
BapiClass input = new BapiClass();
wdContext.node<BAPINODE>.bind(input);
Above code can be written in your Custom Controller or View's doinit.
Then you write the code for doctype as given in the post above.
Regards,
Ajay

How to call BAPI in Extended Value Selector in Webdynpro for java

Hi all
i need to call a BAPI and populate the data in Extended Value Selector UI element.
can you please provide sample codes and required help.
Regards
Sunil

Hi,
Go through the following link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/391ee590-0201-0010-1c89-f1193a886421]
[Re: Creat organization tree in OVS]
and also you can search in SDN, there are lots of threads
Regards
Raghu

Read values from Adobe Interactive Form inside the webdynpro

Hello,
I have problems to read the values of the fields inside de adobe. I read an article on saptechincal that told:
You can see the Adobe form that we have designed, enter the data as shown below and press the submit button. (As I said earlier an activex control will be installed on to the client machine, you can see the activex control in the internet explore go to the menu: ToolsàInternet optionsàgo to the programs tab àPress button Manage add-ons.
You can see an activex control named u2018SAP ACFu2019, if you donu2019t have this control you will not see this page: Note you need to have adobe acrobat reader 7.1 installed, I have used version 9, the activex control was not working properly so down graded my adobe reader to 7.1)
This is true ??? I have the Acrobat reader 9.3 and i saw that also have the SAP ACF installed.
The value of the property displaytype on adobe interactive form on webdynpro is activeX or native.
Thank you in advance.

Hi,

Thank you for the answer.

I change the value of the attribute but again i can read anything from the adobe form. So let me explain what i'm doing.

Objective: I have to create one webdynpro with an adobe interactive form for create new clients on r/3 system.

1. I create de the view with 2 elements an interactive form and one submit button.

2. Create the context of the view with the following tree:

> context (node)

 > ADOBE_DATA (node)

 > Clients (from KNA1 table) (node)

 > KUNNR

 > LAND1

 > NAME1

 > ORTO1

 > TELF1

>PDF_SOURCE

3. Complementing the properties of the interactive form:
datasource = clients node of the context
displaytype = native
pdf_source = pdf_source attribute of the context
templatesource = name of the form

4. Create the form, and add the data source to the interface of the form

5. On the form bulider i add and subform on the hierarchy tab and the all the fields of the interface to the form and
automatically the value of the fields are binding.

6.Add a submit button from web dynpro native and add the event click to the button. Then i change the value of the layout type and save e activate the form and the interface

7. The next step is create an action for the button submit for the event "onSubmit". So i create the function and start coding this code:

DATA: adobe_node TYPE REF TO if_wd_context_node,

 client_node TYPE REF TO if_wd_context_node,

 client_element TYPE REF TO if_wd_context_element,

 client TYPE if_create_client=>element_clients.

*Get reference to the adobe_data node from the context

adobe_node = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).

*Get reference to the clients node from the context

client_node = adobe_node->get_child_node( name = wd_this->wdctx_clients ).

*Get element node

client_element = client_node->get_element( ).

*Get the values from the form

client_element->get_static_attributes(

 IMPORTING

 static_attributes = client ).

8. Then for finalize i add the view to the window and crate a web dynpro application and put one break point on the submit function event.

9. Activate and test the application and when the program try to add a reference to the element node always returning a null reference and the application dumped.

So please help with this situation i can't understand what is the mistake.

PS: Now i have installed the acrobat reader 7.0.8

Edited by: miglsilva on Sep 4, 2010 5:50 PM
Edited by: miglsilva on Sep 4, 2010 6:01 PM

How can I filter the Values for the dropdowns in webdynpro

I have given data source to table, but as there are some repetitive values in table of dropdowns, I want to filter the Values for the dropdowns in webdynpro.
How can I do this?

I have given datasource to table in properties of table.
I have 2 different dropdowns for different columns in the table.
if the size of the table is 20 I get all the values populated in the dropdowns.
In these values, there are some repetetive values which I dont want to appear.
I can display it by making loop and can select from the values.
the problem is how to set the new values to that drop down again using context?
eg
dropdowns have,
presales activity
presales activity
presales activity
presales activity
presales activity
I need to filter the variable element and put back it in dropdown.
Thanks and regards
Hanif Kukkalli

FM/BAPI for assigning a class and value for the class instead of manually d

Hi guys,
Instead of manually adding equipment class and assigning value for the class added can i get a FM or BAPI.
this is for transaction IE02.
rewards will be given.

Hi
I hope this thread can help you
Characteristic Value
Re: Equipment Characteristic Value
Change Equipment Using Transaction IE02
Regards
pavan

Passing value from Adobe Interactive form, to the Webdynpro Application

Hi,
I have followed all the tutorials on interactive forms in WD for Java, & am able to successfuly display my context data in an interactive form.
However, i need help with the following:
1. Online scenario:
User has filled details in an interactive form & clicks on the submit button.
The Data from the form is NOT getting passed back to the WebDynpro application.
2. Offline Scenario:
User has filledup a pdf file(form), & has uploaded the form to the webdynpro application, using the file-upload UI element.
How do i read the data that the user has entered in that pdf file?
Any help with regard to these two queries, will be appreciated.
Thanks,
Hanoz

1) Online Scenario
check if the context mapping between UI elements and Context is properly done
check if the cardinality of the Context is alright.
2) Offline Scenario
you will have two views.
one upload view
and one interactive form view
in the upload view use the File Upload UI element.
in the Interactive Form View.... use the same view which you used to create the offline form, thus the interactive form UI element will already know the structure of data and the context mapping in the pdf file when you upload it.
Add the following line of code to the
method wdDoInit.
wdContext.getNodeInfo().getAttribute
("pdfObject").getModifiableSimpleTyp
e();
Add the following line of code right
before
wdThis.wdFirePlugOutToDisplay()
in the method onActionShowForm().
wdThis.wdGetTravelRequestCompControl
ler().wdGetContext().currentContextE
lement().setPdfObject(wdContext.curr
entContextElement().getPdfObject());
in the interactive form view, change the property of the interactive form.... MODE to usePdf.
regards,
-Ag.

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
 The instance of the above bapi.
 Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
 In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
 Z<Struct>itm tab=new Z<Struct>();
 Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
 Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

Value help in webdynpro applications

Hi,
I have implemented a simple value help application in webdynpro as given in one of the pdf's and it is working fine.
I get a value and description pair as popup.
I have changed the field name to "Subject ID" as shown below. and it is working fine too. now i want to change the label for the "display text" field. how can that be done.
I mean there are 2 fields in the popup. for the first field i have changed the label name to "subject ID" (SubjectType.setFieldLabel("Subject ID"))
now i want the second field label also to change to "Initials" instead of "display text" which is usually shown as default.
ISimpleTypeModifiable SubjectType = attributeInfo.getModifiableSimpleType();
SubjectType.setFieldLabel("Subject ID");
IModifiableSimpleValueSet valueSet = SubjectType.getSVServices().getModifiableSimpleValueSet();
 valueSet.put("SUBJ-001","A.B.");
 valueSet.put("SUBJ-002","C.D.");
 valueSet.put("SUBJ-003","E.F.");
 valueSet.put("SUBJ-004","X.Y."); 
is there any way to implement that?

hi,
 I tried implementing Object value selector. I'am getting the data in the OVS table but there are some problems i'am facing
1.> I cant see the headers for the result table
2.> I cant see labels for the search input fields.
I have not used any model binding, am directly binding an element to a node and hardcoding values in the element to test it.
IPublicOVSCustomController.IOutputListNode node = wdContext.nodeOutputList();
IPublicOVSCustomController.IOutputListElement elem ;
elem= node.createOutputListElement();
node.addElement(elem);
elem.setName("");
elem.setId("");
does it have to do with this kind of binding cause in the pdf it gives an example with a BAPI. there has been a model binding and they are calling it like this:
IPublicOVSCust.IBapi_Flight_Getlist_InputElement ovsInput =
(IPublicOVSCust.IBapi_Flight_Getlist_InputElement)
queryInputNodeElement;
and the tables automatically show the hearders and there are label fields...does it have to do anything with model binding?

BAPI_PO_CHANGE, changing condition value in the purchase order

Hi Friends,
I have a requirement,
a flat file is present in the application server that contains the information about PO,PO-ITEM,Condition type, movement type , condition value, plant, storage location .
And i m calling the bapi "BAPI_PO_CHANGE" and passing the po number to it.
the bapi returns the following tables, i_return, i_header,i_cond, i_item,i_itemx.
But the purpose of calling the BAPI is, to check, if the condition value in the specified PO is '0', then it has to replace with the value of condition type present in the flat file.
But when we check the tablei_return, its shows error type.
And the PO is not updated with the new condition value.
Help me out in sorting this problem, by telling me
what value is to be passed to the respective BAPI and what should i do to solve the issue?
and after that i m using a BAPI " BAPI_GOODSMOVEMENT_CREATE".
and it is for the purpose of creating the GR(Goods Receipt),
when i go through the i_return table of the bapi, it si returning a message that "BAPI_201 Unable to create goods movement".
Help me in proving the input to those bapi's and how can i get the expected output?
And let me know, what the bapi's ,"BAPI_COMMIIT" and " BAPI_ROLLBACK" , will be doing?
Edited by: kumar t on Aug 9, 2008 1:02 PM

HI
[Check the Link|http://abap.wikiprog.com/wiki/BAPI_PO_CHANGE]
[Commit|http://abap.wikiprog.com/wiki/BAPI_TRANSACTION_COMMIT]
[Roll Back|http://abap.wikiprog.com/wiki/BAPI_TRANSACTION_ROLLBACK]
Regards
Pavan

Line item pricing based on total value of the order

Hi,
We need to charge as a separate line item (material) 'Insurance' as a % based on the total value of the order less one line item. Our orders are created on the web and posted via a BAPI.
(a) depending on where the customer is located, we charge a certain added shipping cost.
(b) the customer has the choice to ask for insurance or not.
The actual order may be 10 lines totaling $1,000 and due to location, the BAPI slaps on an added line item of $100. If the customer chose the insurance option, the BAPI needs to slap on another line item whose value would be, say 2% of the total order, i.e. 2% of 1000 (instead of on 1000+100). Of course, if the customer doesn't choose this option he is not charges this extra line and further if the customer is not in the particular region, the 100 charge may also not be there.
The 2% can vary time to time so needs to be driven by a condition record based on %.
How can we achieve this in the pricing procedure? The logic of how the BAPI will function is clear to us, we are stuck on the pricing procedure configuration.
Glad to answer any further questions you may need for clarifications.
Many thanks!

Ideally insurance would be levied on end customer based on Inco Terms like CIF, DDU etc.,
So you can have an access sequence for which you can make use of tables like 033 & 034 in V/07. In VK11, for this combination, maintain the required insurance percent.
In condition type V/06, for this condition type, maintain "C" for Manual entries, since you have indicated that customer has the choice. Otherwise, this can be populated automatically in sale order.
Similarly, for shipment cost also, you can have the Inco2 as one of the combination so that based on region, this condition type will be populated in sale order. If you have shipment cost configured, then this can be achieved.
In your pricing procedure, you have to assign the shipment cost condition type next to insurance and assign the From-To step accordingly.
thanks
G. Lakshmipathi

Need name of a function module or BAPI to update the Tax Classification val

Hi Guru's
Need name of a function module or BAPI to update the Tax Classification value for Material master.
Thanks in advance.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

Problem with mutiple BAPI calls during the commit

Hi all,
I am trying to create accounts for a given partner i the transaction F9K1 using the BAPI BAPI_BKK_ACCNT_CREATE. After calling the BAPI I am committing it too.
The problem is if I try to create multiple accounts like RCA, ACA, MCA, IOE and so on, the first time the BAPI is called to create RCA account it is successful an it is even committing. When I call the BAPI to create the the ACA account the return table from the BAPI shows success message but the commit fails. If I restart the program and try creation of accounts now the RCA will throw a error msg saying account already exist, ACA account will be created and then the MCA account creation fails in the same manner explained above.
I see the issue is with multiple BAPI calls and I tried using all sort of methods like clearing buffers, start new task in local and wait command and all. But none of them seems to be working for me.
Can anyone please guide me on how I can overcome this problem.
Thanks.

BAPI :
BAPI BAPI_BKK_ACCNT_CREATE
Functionality
Use this method to create an account in Bank Customer Accounts. This method returns the following values:
Identification details for the newly created account such as the internal and the external account number, and the bank area details
A table containing error messages
To create an account by using this method, you must specify values for the import parameters Bank Area (BANKAREA) and Product (PRODUCTNAME).
Note: You must also specify a value in the External Account Number (EXTERNALACCOUNTNR) parameter if you have defined an external number range for the bank .
REgards,
Jayan.

BAPI values in the Webdynpro dropdownbox

Similar Messages

Maybe you are looking for