BAPIs for Equipment list, Equipment classification details
Hi,
Can somebody give me the details of BAPs for getting
1. Equipment list for a given function location.
2. Equipment classification details for the given equipment number.
Thanks & Regards
Lakshminarayanan J
Hi,
what do you mean with details? Do you need the fields? You can do a double click on the data type of the details filled for browsing deeper into the structure of the details. Or you can use TCODE SE11 and check the type in the data dictionary.
Best Regards,
Marcel
Similar Messages
-
Bapi for creation of equipment master
hi friends ,
I have to made a BDC program for creation of equipment master .
for that I am using bapi i.e. ' BAPI_EQUI_CREATE '.
I had matched the fields of transaction IE01 but in the additinal data part i could not able to map 'Partner' fields .
pls some body can guide what should i do for it.Hi Das,
If u r going to create equipment no against this Bapi BAPI_EQUI_CREATE"
then u need to pass material no, Equipment type, Serial No. there is no need to give partner no .
If its good, then plz give point. -
BAPI for creation of Equipment BOM
Which BAPI is used for creation of Equipment BOM?
Hi,
Check this Code, it works:
DATA ecsin TYPE csin.
DATA estkob TYPE stkob .
DATA estzub TYPE stzub .
DATA astlnr TYPE stzub-stlnr .
DATA t_stpob TYPE STANDARD TABLE OF stpob WITH HEADER LINE .
PARAMETERS: pa_equnr TYPE equnr DEFAULT '1500037'. "Your Equipment.
START-OF-SELECTION.
ecsin-equnr = pa_equnr.
ecsin-stlty = 'E' .
ecsin-stlan = '4' .
ecsin-werks = 'C002'. "Your Plant.
ecsin-datuv = '20130101'.
estkob-bmein = 'ST'.
estkob-bmeng = 1.
estkob-stktx = 'TEST'.
t_stpob-stlty = 'M' .
t_stpob-postp = 'L' .
t_stpob-idnrk = '000000000040002882'. "Your Component.
t_stpob-meins = 'ST' .
t_stpob-menge = 1 .
t_stpob-rvrel = 'X' .
APPEND t_stpob .
t_stpob-menge = 2.
t_stpob-idnrk = '000000000040002877'. "Your Component.
APPEND t_stpob.
CALL FUNCTION 'CSAI_BOM_CREATE'
EXPORTING
ecsin = ecsin
estkob = estkob
estzub = estzub
* FL_NO_CHANGE_DOC = ' '
* FL_COMMIT_AND_WAIT = ' '
* FL_NO_COMMIT_WORK = ' '
* FL_ALE = ' '
IMPORTING
* FL_WARNING =
astlnr = astlnr
TABLES
t_stpob = t_stpob
EXCEPTIONS
error = 1
OTHERS = 2.
IF astlnr IS INITIAL.
****ERROR.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sergio. -
Bapi for Order list(iw38) and PM Notification(iw21)
Hi experts,
Can you please tell me are there any BAPI's which can fullfill the functionalities of the tcodes: IW38 and IW21 ??
Thanks & regards,
Aayush AggarwalPlease find the list of bapi's present in maintenance notification and orders
ORDERS:
BAPI_ALM_COMPONENT_GET_DETAIL Read Detail Data for a Component
BAPI_ALM_OPERATION_GET_DETAIL Read Detail Data for an Operation
BAPI_ALM_ORDERHEAD_GET_LIST Determination of a List of Maintenance/Service Orders from Selection
BAPI_ALM_ORDEROPER_GET_LIST Determination of a List of Operations from Selection
BAPI_ALM_ORDER_GET_DETAIL Reading of Detail Data for an Order
BAPI_ALM_ORDER_MAINTAIN Process Maintenance-/Service Order
NOTIFICATIONS:
BAPI_ALM_NOTIF_CHANGEUSRSTAT Change User Status of a PM/CS Notification
BAPI_ALM_NOTIF_CLOSE Complete PM/CS Notification
BAPI_ALM_NOTIF_CREATE Create PM/CS Notification
BAPI_ALM_NOTIF_DATA_ADD PM/CS Notification: Add Data
BAPI_ALM_NOTIF_DATA_DELETE PM/CS Notification: Delete Data
BAPI_ALM_NOTIF_DATA_MODIFY PM/CS Notification: Change Data
BAPI_ALM_NOTIF_GET_DETAIL PM/CS Notification: Read Detail Data
BAPI_ALM_NOTIF_LIST_EQUI Select PM/CS Notifications by Equipment
BAPI_ALM_NOTIF_LIST_FUNCLOC Select PM/CS Notifications by Functional Locations
BAPI_ALM_NOTIF_LIST_PARTNER Select PM/CS Notifications by Partners
BAPI_ALM_NOTIF_LIST_PLANGROUP Select PM/CS Notifications by Maintenance Planner Group
BAPI_ALM_NOTIF_LIST_SORTFIELD Select PM/CS Notifications by Sort Field
BAPI_ALM_NOTIF_POSTPONE Reset PM/CS Notification
BAPI_ALM_NOTIF_PUTINPROGRESS Release PM/CS Notification
BAPI_ALM_NOTIF_SAVE Save PM/CS Notification
BAPI_ALM_NOTIF_TASK_COMPLETE PM/CS Notification: Complete Task
BAPI_ALM_NOTIF_TASK_RELEASE PM/CS Notification: Release Task
BAPI_ALM_NOTIF_TASK_SUCCESS PM/CS Notification: Set Task to Successful
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person -
Bapi for association with Equipment serial number and return order
Hi,
I wanted to know if there was a BAPI which has an association between
Equipment serial number and return order .As I want the association between Euipment serial number and return order to show in the Equipment Serial history.
Could you please help with this.
Thanks & Regards,
MJohn.
Edited by: mjohn02 on Feb 15, 2012 10:38 AMHi Sandeep
I want create a return delivery for the material with the same serial number for which i have created original delivery but the system is not allowing it is giving me error message as return delivery not possible with same serial number.How do i go forward.
Regards
T.Srikanth -
Document Management System : BAPI for Distribution list creation CVI1 Tcode
Hi ,
Cn you please provide me the available BAPI to create Disctribution lists using CVI1 transaction .
Urgent
RegardsHello Murugesh,
Thanks for the responce ,
But When i tried to use the same FM to create Distribution list i didnt find ant parameter within the FM to pass the correct recepient name linked to the document(recepient list id) .
Can you please provide me the sample code or help me ,how to pass the recepient name coom type and num of copies for each recepient listid .
Urgent
Thanks a lot -
Bapi for invoice lists for a customer
Can some one tell me the bapi which can be used to view all the invoice lists for a customer for date range.
Hello
I am not sure if there is such a BAPI available. However, you could try a two-step-approach:
(1) Read sales orders of customer using BAPI_SALESORDER_GETLIST
(2) Feed selected sales orders into REFDOCRANGE of BAPI_BILLINGDOC_GETLIST
Regards
Uwe -
Hi all,
I have a question about part lists and bapis.
I have to export part lists from SAP R/3.
To connect to SAP I use JavaConnectors.
But I don't know how to get for example a list of all part lists.
Do I have to use any interfaces, too?
Which BAPIs do I have to use?
In the BAPI-explorer I found MaterialBOM and there
BAPI_MATERIAL_BOM_GROUP_CREATE
BAPI_MAT_BOM_EXISTENCE_CHECK
But which is the right method to get each part list?
Can anybody help me?
thxHi Holger,
Please check this sample code.
data: begin of istpox occurs 0.
include structure stpox.
data: end of istpox.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
mehrs = 'X'
datuv = sy-datum
mtnrv = matnr
werks = werks
emeng = menge
tables
stb = istpox
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
others = 8.
Regards,
Ferry Lianto -
BAPI for Source List Upload ( ME01 )
Hi All..
Is there any BAPI available for uploading source list for a material??
Transaction involved - ME01.
Thanks & Regards,
NidhiHi,
Try the below function module ME_UPDATE_SOURCES_OF_SUPPLY which is being used by standard transaction ME01.
sample code
REPORT ZTEST.
DATA: BEGIN OF XORD OCCURS 50.
INCLUDE STRUCTURE EORD.
DATA: UPDKZ,
END OF XORD,
YORD type table of EORD with header line.
clear xord.
clear yord.
xord-MATNR = '100-100'.
xord-WERKS = '3000'.
xord-ZEORD = '00001'.
xord-ERDAT = '20080403'.
xord-ERNAM = 'SAPDEV02'.
xord-VDATU = '20080403'.
xord-BDATU = '20100510'.
xord-LIFNR = '0000001000'.
xord-FLIFN = 'X'.
xord-EKORG = '1000'.
xord-UPDKZ = 'U'.
append xord.
move-corresponding xord to yord.
append yord.
CALL FUNCTION 'ME_UPDATE_SOURCES_OF_SUPPLY' IN UPDATE TASK
EXPORTING
I_CHANGEDOCUMENT = 'X'
TABLES
XEORD = XORD
YEORD = YORD.
COMMIT WORK.
Cheers,
vasavi.v -
Finding FM/RFC/BAPI For PO list In Perticular Vendor
Hi,
Can u help for Finding PO list For a perpicular vendor.
i.s i want to pass Vendor No as In put it will give list of PO as out put
Regards,
Sunil sahooHi
Try the below code
types : begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-ebeln,
end of ty_ekko.
data : it_ekko type table of ty_ekko,
wa_ekko type ty_ekko.
parameters : lifnr like ekko-lifnr.
select ebeln lifnr into table it_ekko from ekko where lifnr = lifnr.
loop at it_ekko into wa_ekko.
write : / wa_ekko-lifnr,
wa_ekko-ebeln.
endloop.
Regards
Madhan
Edited by: Madhan Doraikannan on Oct 8, 2008 12:23 PM -
BAPI for getting list of repetitive order
Hi,
Can anybody say
What BAPI is used to get the list of repetitive order...Boss,
ISU_DB_ERDK_SELECT_VKONT
If you see the function module table parameters you will get to know.
Pass the contractaccount into ISU_RANGES to get the invoice documents.
Regards,
Shiva Kumar. -
Update Bapi for Vendor Master Characterstic & Classification
Dear All,
I am using the Bapi "BAPI_OBJCL_CREATE" While updating, in return parameter i got the following the message "Assignment exists and is valid" and is not update as well...
Thanks in advance..Hai
check the standard include "LCLBPAU14" this is using the following F.M
call function 'BAPI_OBJCL_CREATE'
exporting
objectkeynew = l_object
objecttablenew = l_objecttable
classnumnew = classnum_new
classtypenew = l_classtype
status = status
standardclass = standardclass
changenumber = changenumber
keydate = keydate
no_default_values = no_default_values
importing
classif_status = classif_status
tables
allocvaluesnum = allocvaluesnum
allocvalueschar = allocvalueschar
allocvaluescurr = allocvaluescurr
return = return.
Regards
Manjunath M -
Is there any BAPI for BOM creation? which does by RCSBI010 / Batch Input.
Hi Experts,
I need to Upload the extracted Excel-file(.txt) for BOM creation, so, pls, let me know that, Is there any BAPI for this purpose. In detail the requirement is that,
The suggested idea shuld work as like as pgm. RCSBI010
thanq
Edited by: Srinivas on Feb 14, 2008 6:18 PMHi Srinivas,
Try these Function Modules
CS_BI_BOM_CREATE_BATCH_INPUT - Create BOM Via Batch Input
CS_BI_BOM_CREATE_BATCH_INPUT1 - Create BOM Via Batch Input (Corrected Session Handling)
There are two BAPI's too, which can be used
ALE_MATERIAL_BOM_GROUP_CREATE
BAPI_MATERIAL_BOM_GROUP_CREATE - Creation of a material BOM group
Hoe this helps.
Edited by: Priyabrata Samanta on Feb 15, 2008 3:56 AM -
BAPI for equipment classification
Hi,
Does anybody know the BAPI for equipment classification and also the required fields of the BAPI.
With Regards,
NelsonHi,
Check this Bapi <b>BAPI_EQUIPMENT_SAVEREPLICA</b>, Sure it will help u...
Regards,
Sridhar -
IE07 and error 'Maintain field selection for Fleet data in Equipment List'
Hi all,
When running transaction IE07 (multi-level equipment list) , I get the following error: 'Maintain field selection for Fleet data in Equipment List (Multilevel)'
I can't see where is the missing configuration point.
We have activated business function LOG_EAM_CI_3.
Have anyone encountered this error before?
Thanks,
P.Hi Narasimhan
Could you give more details ? where is located this setting?
Thanks,
P.
Maybe you are looking for
-
Setting up my Line6 UX1 with Audtion 3.0 on Win7 - settings dialog takes ages to respond
I downloaded the trial of Adobe Audition 3.0 (I've been using 1.5 on WinXP for a few years now and it's always been fine to use!) I am trying to set up my Line6 POD Studio UX1 with Audtion 3.0 on Windows 7 Pro (64 Bit - 32GB RAM Quad Core Intel i7 37
-
When I try to open iTunes app on iPhone 5, it starts to open then closes straight away, I upgraded to iOS 7.0.2 and it has been like this since I upgraded!
-
New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.
-
Hello I have to add new fields in report RFUMSV00. As you know the selection screen shows a section where you can customise the layout of many section. I have to add one field in totals section. Now I found a BADI (FI_TAX_BADI_014) that should be use
-
E5: black screen problem with FLV file
give solution.....when i play FLV there is option for pause, stop but black screen.what may the problem .other file plays normal .help me plzzzz Solved! Go to Solution.