Batch input messages

hi experts
how can i find out what is the meaning of the message numbers in batch input operation, and what is the meaning of the message type.
thanks
amit

for meaning of the message types use F1 on message statement.

Similar Messages

  • In which tables are batch input error messages logged?

    does anybody know in which table are the batch input error messages logged?
    I have to display the error messages which have occured during the transaction
    I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
    does anybody know about the batch input error messages?

    hi,
    check the sample code below.
    messtab is of type BDCMSGCOLL.
    Call the transaction and then use T100 to get the message.
    DATA: l_mstring(480).
    call transaction using
      REFRESH messtab.
      CALL TRANSACTION tcode USING bdcdata
                       MODE   ctumode
                       UPDATE cupdate
                       MESSAGES INTO messtab.
      l_subrc = sy-subrc.
      SKIP.
      LOOP AT messtab.
        SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                                  AND   arbgb = messtab-msgid
                                  AND   msgnr = messtab-msgnr.
        IF sy-subrc = 0.
          l_mstring = t100-text.
          IF l_mstring CS '&1'.
            REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
            REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
            REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
            REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
          ELSE.
            REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
          ENDIF.
          CONDENSE l_mstring.
          WRITE: /4 messtab-msgtyp, l_mstring(250).
        ELSE.
          WRITE: /4 messtab.
        ENDIF.
      ENDLOOP.

  • Parking not possible during batch input

    Hello,
    Iu2019m facing a problem for creating a parked vendor invoice in background (Tcode FB60 / FV60) thru BDC or BAPI.
    I looked for a BAPI and I just found "BAPI_ACC_INVOICE_RECEIPT_POST", for posting FI invoice : it doesnu2019t correspond to our requirements (we need to park).
    Then I used "PRELIMINARY_POSTING_DOC_WRITE" for parking an invoice but when we see the parked invoice in FBV2, the displayed Tcode is like FBV1. The users want the vendor invoice header, I mean the same screen as FB60.
    Finally, I tried to use Batch Input to park but I got the following message :
    "Parking not possible during batch input"
    Message no. FP140
    Procedure
    In Customizing, you can control whether an error message is issued."
    I found nothing in IMG about control message
    And in sdn forums, some said that bdc doesnu2019t work for an enjoy transaction (MIRO, MIR7, FB60 ..) but we already created a BDC for MIR7 and it works.
    Thanks,

    You can use [CALL TRANSACTION|http://help.sap.com/abapdocu_70/en/ABAPCALL_TRANSACTION.htm] like BDC.
    via CALL TRANSACTION you may use [bdc options with NOBINPT |http://help.sap.com/abapdocu_70/en/ABAPCALL_TRANSACTION_BDC_OPTIONS.htm] so the systeme field sy-binpt will be initial.
    You will need to manage the error messages in your program.(no SM35) one solution is to build the BDC for records with errors.
    There are many threads on [difference Between Batch Input and Call Transaction in BDC|https://forums.sdn.sap.com/search.jspa?threadID=&q=differenceBatchInputCallTransaction&objID=c42&dateRange=all&numResults=15&rankBy=10001]
    Regards,
    Raymond

  • 'S' message in BDC and message of type 'A' in batch input session

    We have to upload data for ABZON transaction of assets. When we use LSMW with recording method and try to upload say 3 records. All teh records are updated successfully but the batch input session log says last two records with a message of type 'A' "leave transaction is not possible in batch input"
    But when we upload the same data with BDC program with call transaction then teh log shows same message with type 'S'.
    what could be the reason for this?
    Though data gets uploaded successfully the 'A' message is being displayed in LSMW batch input log.
    if anyone has encountered a similar problem pls let us know how to resolve this asap.
    Thanks,
    Simmi

    Did your batch input end with save ( /11 ) or what ok_code are you using ?

  • Messages in a batch input session

    Hi,
    I would like to catch the messages of a batch input session in order to inform user of clearing itens posted and not posted.
    So i thought that SX_MESSAGE_TEXT_BUILD would work fine. Somebody can give an example of this kind of code.
    Of course if you know another mean of solve the problem i will appreciate that.
               Best Regards
                    João Fernandes

    Hi,
      loop at i_yerrlog into wa_yerrlog.
        v_msg_id = wa_yerrlog-msgid.
        v_msg_no = wa_yerrlog-msgnr.
        v_msg_var1 = wa_yerrlog-msgv1.
        v_msg_var2 = wa_yerrlog-msgv2.
        v_msg_var3 = wa_yerrlog-msgv3.
        v_msg_var4 = wa_yerrlog-msgv4.
    * Creating message text
        call function 'MESSAGE_PREPARE'
          exporting
            msg_id   = v_msg_id
            msg_no   = v_msg_no
            msg_var1 = v_msg_var1
            msg_var2 = v_msg_var2
            msg_var3 = v_msg_var3
            msg_var4 = v_msg_var4
          importing
            msg_text = v_text1.
        move-corresponding wa_yerrlog to wa_output2.
        move v_text1 to wa_output2-mstxt.
        append wa_output2 to i_output2.
      endloop.
    aRs

  • Error message 00 344 : No batch input data for the screen SAPMF02D 0324

    Hi Experts,
    We are working with SAP CRM 4.0 and SAP R/3 6.20
    We have an important number of BDocs (type 'BUPA_MAIN' ) in status  E02 with the error message
    00 344 : 'No batch input data for the screen SAPMF02D 0324'.
    Can any one help us to explain the cause of this message and how to resolve it ??
    Thanks you in advance for your help !
    Best regards,
    Nabil.

    Any ideas ?
    We really appreciate your help !

  • Messages, function modules and Batch Input

    Hi,
    I need to modify some values on the BP transaction with a batch input and I encapsulated it on a function module, because I need to call this FM from a Web Dynpro ABAP.
    The problem is that some success messages are raising from the batch input, even if I set a message table to store them on the call of the batch input.
    DATA: bdcdata    TYPE STANDARD TABLE OF bdcdata,
              wa_bdcdata TYPE bdcdata,
              messtab    TYPE STANDARD TABLE OF bdcmsgcoll.
      DATA: v_message   TYPE string,
                wa_messtab  TYPE  bdcmsgcoll,
                v_mode      TYPE c VALUE 'N'.
    " some code here....
      CALL TRANSACTION 'BP' USING bdcdata MESSAGES INTO messtab
                                                   MODE v_mode
                                                   UPDATE 'S'.
    How can I prevent these messages? Thanks in advance.
    Regards,
    Jordi

    Yes,
    there are some BAPIs to work with BP, but I could not find any that meets my requirements. I need to do two actions:
    1 - complete the "Internet user" tab
    2 - set the "central lock" flag on the status tab
    If you have a BAPI or FM to make these two actions, please let me know. I spent two days looking for them and finally I've decided to use the batch inputs (I hate them).
    Regards,
    Jordi

  • Batch input session Information message

    Hi,
        Is there any way to display information messages in a batch input session. Suppose I have a batch input session running on a particular transaction.If in a particular screen, I want to display an information message to the user that ' Particular sales order has been created on date xx'. Is it possible.
    Thanks &* Regards,
    Vishnu Priya

    Hello,
    It is not possible in the Batch input Session.
    You can do it by <b>Call transaction</b>. But it not possible to give message at particular screen. Becuase we are only passing screen seq and data for the screen.
    Like,
    Call transaction Va01.
    if something is there,
    message I
    endif.
    regards,
    Naimesh

  • Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60

    Dear All,
      I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
    How to overcome this issue and if you already encounter this kind of problem please advice me.
    Thanks in Advance.
    Deesanth

    Hi,
      Below is my recording.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'INVFO-ACCNT'  gwa_inv_up-lifnr.
        perform bdc_field       using 'INVFO-BLDAT'  gwa_inv_up-bldat.
        perform bdc_field       using 'INVFO-XBLNR'  gwa_inv_up-xblnr.
        perform bdc_field       using 'INVFO-BUDAT'  gwa_inv_up-budat.
        perform bdc_field       using 'INVFO-MONAT'  '9'.
        perform bdc_field       using 'INVFO-BLART'  gwa_inv_up-blart.
        perform bdc_field       using 'INVFO-WRBTR'  gwa_inv_up-dmbtr.
        perform bdc_field       using 'INVFO-WAERS'  gwa_inv_up-waers.
        perform bdc_field       using 'INVFO-XMWST'  gwa_inv_up-xmwst.
        perform bdc_field       using 'INVFO-MWSKZ'  'P0'.
        perform bdc_field       using 'INVFO-SGTXT'  gwa_inv_up-sgtxt.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'BDC_OKCODE'   '=PAYM'.
        perform bdc_field       using 'INVFO-GSBER'  gwa_inv_up-gsber.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'BDC_OKCODE'   '=BS'.
        perform bdc_field       using 'INVFO-ZLSCH'  gwa_inv_up-zlsch.
        cnt = 1.
        cnt1 = 1.
        clear gwa_inv_line.
        loop at gt_inv_up  into gwa_inv_line  where indic = 'D'
                                       and count = gwa_inv_up-count.
          if cnt1 gt 1.
            concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
            perform bdc_field using fld 'X'.
            perform bdc_dynpro using 'SAPMF05A' '1100'.
            perform bdc_field using 'BDC_OKCODE' '=0005'.
          endif.
          concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-lifnr.
          concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-shkzg.
          concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-dmbtr.
          concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-mwskz.
          concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-sgtxt.
          concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-gsber.
          concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-kostl.
          concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-posid.
          concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-fistl.
          concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-fipos.
          concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-geber.
          perform bdc_field       using 'BDC_CURSOR' fld.
          cnt1 = cnt1 + 1.
        endloop.
        perform bdc_dynpro using 'SAPMF05A' '1100'.
        perform bdc_field  using 'BDC_OKCODE' '=BS'.
        perform bdc_dynpro      using 'SAPMSSY0' '0120'.
        perform bdc_field       using 'BDC_OKCODE' '=BP'.
        call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
                                        messages into gt_bdc_messages.
    Thanks,
    Deesanth

  • Editing is terminated message when running batch input error using lsmw

    Any Idea why would I get the info message like
    "Editing is terminated message when running batch input error using lsmw"
    please suggest where to look at.
    Thanks,
    Edited by: mark_yellow mark on Jul 1, 2008 3:27 AM

    Hi Mark,
    Welcome.
    This is lsmw batch input error.while  uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
    Fix the error using logs.
    thanks
    karthik

  • Conflicting Error Messages in Batch Input Screen SAPLCOIH 3000

    Hi,
    Appreciate it if someone could guide me on a small batch input issue I have with the creation of a new work order and attempting to place costs in a specific line of a value category. I am able to work out and try to place the cursor in the field I need (PMCOEA-SKOSTENKGR(8)) but when I run the bactgh input session it comes up with the error message "No batch input data for screen SAPLCOIH 3000". When I try and alter this to throw the screen required I then get the message "Field PMCOEA-SKOSTENKGR(8) does not exist in the screen SAPLCOIH 3000"?
    I am confused by this. can any one shed any light on this please?
    Thanks

    Hi,
    Thanks for your reply. Yes I have also tried both stepping thru the process online and in background with the same outcome. I'm tring to understand whether there is an issue with trying to supply estimated cost details via batch input. All my other screen processing up to this point (including adding all work order header, notifications and long text information) works perfectly and without problem. The batch input tells me to supply this screen but when I do I get a conflicting error that it is not the correct screen. I'm trying to find whether I should be supplying a subscreen instead.
    Any further help appreciated.
    Thanks

  • LSMW : error message when ru batch input

    Hi,
    i want to integrate some FI docs with LSMW, when i run the Batch input i have this error : Choose valid function.
    Any idea to solve that.
    full points will be assigned.
    Regards

    Hi Mark,
    Welcome.
    This is lsmw batch input error.while  uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
    Fix the error using logs.
    thanks
    karthik

  • Error while creating a product group--Batch input error 9

    Hi,
       While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
    Thks,
    Nilesh

    Hi Neel,
       As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
      Thks for yr help.
    Regards,
    Nilesh

  • BDC programming using Batch input Session.

    Hello Experts.
    I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
    at the moment.
    This is the program that upload Local file which has plural records, and put the records into a Session.
    These are the records.
    413459,KIM EI HWAN121                ,19810607,MIADONG1234
    423459,KIM EI HWAN122                ,19810607,MIADONG1235
    433459,KIM EI HWAN123                ,19810607,MIADONG1236
    443459,KIM EI HWAN124                ,19810607,MIADONG1237
    453459,KIM EI HWAN125                ,19810607,MIADONG1238
    463459,KIM EI HWAN126                ,19810607,MIADONG1239
    I succeeded making Session.
    However, for some reaseon, every record in the Session has got the same, value which is the first record.
    Why is this happening? And How can I correct the code below?
    REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
                            LINE-SIZE 255
                            MESSAGE-ID ZBATCH.
    = Types definition ===================================================
    TYPES: BEGIN OF TYP_LOCAL,               "For Local file upload
             RECORD(200) TYPE C,
           END   OF TYP_LOCAL.
    = Internal table definition ==============================================
    DATA: BEGIN OF BDC_TAB OCCURS 0.        "BDCDATA itab
            INCLUDE STRUCTURE BDCDATA.
    DATA: END   OF BDC_TAB.
    DATA: BEGIN OF MESSAGE_BDC OCCURS 0.    "Message itab
            INCLUDE STRUCTURE BDCMSGCOLL.
    DATA: END   OF MESSAGE_BDC.
    DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL,  "Local file itab
          F_TBL     TYPE FILETABLE.                    "FILETABLE fot local
    = Structure table definition =========================================
    DATA: STR_F_TBL LIKE LINE OF F_TBL,                "FILETABLE structure
          STR_LOCAL TYPE TYP_LOCAL.                    "Local file structure
    = Variable definition ================================================
    DATA: LV_RC     TYPE I,                            "Method parameter
          ENUMBER   TYPE ZT601-ENUMBER,                "Employee number
          NAME      TYPE ZT601-NAME,                   "Employee name
          BIRTH     TYPE ZT601-BIRTH,                           "Birthday
          HOMETOWN  TYPE ZT601-HOMETOWN,                        "Hometown
          SYSVAL    TYPE SY-SUBRC.                     "System valuible
    = Constants definition ===============================================
    CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'.      "Table name ZT601
    = Parameters definition ==============================================
    PARAMETERS: F_NAME      TYPE RLGRAP-FILENAME OBLIGATORY,    "File path
                EXECMODE(1) TYPE C.                    "Execute mode
    INITIALIZATION
    *----- Initialize all valuables, structures and internal tables
    CLEAR: LV_RC,
           STR_F_TBL,
           STR_LOCAL,
           ENUMBER,
           NAME,
           BIRTH,
           HOMETOWN.
    REFRESH: F_TBL,
             TBL_LOCAL.
    AT SELECTION-SCREEN
    *----- When the button next to Parameter 'F_NAME',
    *----- File dialog open.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
        EXPORTING
          WINDOW_TITLE            = 'SELECT FILE'
          DEFAULT_FILENAME        = '*.TXT'
       CHANGING
         FILE_TABLE               = F_TBL
         RC                       = LV_RC
        EXCEPTIONS
          FILE_OPEN_DIALOG_FAILED = 1
          CNTL_ERROR              = 2
          OTHERS                  = 3
    *----- system valiable check.
    *----- If done properly,
    *----- Put the path into the File path parameter
      IF SY-SUBRC = 0.
        READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
        F_NAME = STR_F_TBL.
    *----- If not done properly, show message
    *----- An error occured while getting file path then end program
      ELSE.
        MESSAGE E000.
      ENDIF.
    *----- Execute code can only be A or N.
    AT SELECTION-SCREEN ON EXECMODE.
      IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
        MESSAGE E001.
      ENDIF.
    START-OF-SELECTION
    START-OF-SELECTION.
    *----- Upload Local file of file path parameter.
      CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
                FILENAME                = F_NAME
                FILETYPE                = 'ASC'
           TABLES
                DATA_TAB                = TBL_LOCAL
           EXCEPTIONS
                FILE_OPEN_ERROR         = 1
                FILE_READ_ERROR         = 2
                NO_BATCH                = 3
                GUI_REFUSE_FILETRANSFER = 4
                INVALID_TYPE            = 5
                OTHERS                  = 6.
    *----- System valiable check.
    *----- If not done properly, show an error message
    *----- An error occured while uploading local file then end program
      IF SY-SUBRC <> 0.
        MESSAGE E002.
      ENDIF.
      PERFORM BDC_OPEN.
    *----- Loop Internal table
      LOOP AT TBL_LOCAL INTO STR_LOCAL.
    *----- Spilt the file record and put them into each valiable.
        SPLIT STR_LOCAL AT ',' INTO  ENUMBER
                                     NAME
                                     BIRTH
                                     HOMETOWN.
    *----- Data check Function module
        CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
             EXPORTING
                  DATE                      = BIRTH
             EXCEPTIONS
                  PLAUSIBILITY_CHECK_FAILED = 1
                  OTHERS                    = 2.
    *----- When error occurs while checking date, show an error message.
    *----- (&1) is not date
        IF SY-SUBRC <> 0.
          MESSAGE E003 WITH BIRTH.
        ENDIF.
    *-- The first screen of SE11
    *----- Screen number 0102 of program id SAPMSRD0
        PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RSRD1-TBMA_VAL'. "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=SHOW'.          "Display button
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                      'X'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                       TBL_NAME.                "ZT601
    *-- Table definition screen
    *----- Screen number 2000 of program id SAPLSD02
        PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'DD02D-TABCLTEXT'.  "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=TDED'.            "Create entry
        PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                      'SAPLSD02'.
        PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                      'SAPLSED5'.
    *-- Data input screen
    *----- Screen number 0101 of program /1BCDWB/DBZT601
        PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'ZT601-CRUSER'.    "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=SAVE'.                  "Save
        PERFORM BDC_FIELD       USING 'ZT601-MANDT'
                                      SY-MANDT.                 "Client
        PERFORM BDC_FIELD       USING 'ZT601-ENUMBER'
                                      ENUMBER.           "Employee number
        PERFORM BDC_FIELD       USING 'ZT601-NAME'
                                      NAME.              "Employee name
        PERFORM BDC_FIELD       USING 'ZT601-BIRTH'
                                      BIRTH.                    "Birthday
        PERFORM BDC_FIELD       USING 'ZT601-HOMETOWN'
                                      HOMETOWN.                 "Hometown
        PERFORM BDC_FIELD       USING 'ZT601-CRDATE'
                                      SY-DATUM.          "System date
        PERFORM BDC_FIELD       USING 'ZT601-CRTIME'
                                      SY-UZEIT.          "System time
        PERFORM BDC_FIELD       USING 'ZT601-CRUSER'
                                      SY-UNAME.          "System user
    *-- Data input screen (After input)
    *----- Screen number 0101 of program /1BCDWB/DBZT601
        PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '/EBACK'.                 "Back
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'ZT601-CRUSER'.    "Field on Cursor
    *-- Table definition screen]
    *----- Screen number 2000 of program SAPLSD02
        PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'DD02D-TABCLTEXT'.  "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=WB_BACK'.               "Back
    *-- The first screen of SE11
    *----- Screen number 0102 of program SAPMSRD0
        PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RSRD1-TBMA_VAL'.   "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=BACK'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                      'X'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                      TBL_NAME.
        PERFORM BDC_INSERT.
      ENDLOOP.
      PERFORM BDC_CLOSE.
          FORM BDC_DYNPRO                                               *
          Put Program-Id, Dynpro screen number, Start point
          into DBCDATA
    -->  PROGRAM                                                       *
    -->  DYNPRO                                                        *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR BDC_TAB.
      BDC_TAB-PROGRAM  = PROGRAM.
      BDC_TAB-DYNPRO   = DYNPRO.
      BDC_TAB-DYNBEGIN = 'X'.
      APPEND BDC_TAB.
    ENDFORM.
          FORM BDC_FIELD                                                *
          Put Field Name and Value into BDCDATA
    -->  FNAM                                                          *
    -->  FVAL                                                          *
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR BDC_TAB.
      BDC_TAB-FNAM = FNAM.
      BDC_TAB-FVAL = FVAL.
      APPEND BDC_TAB.
    ENDFORM.
          FORM bdc_process                                              *
    FORM BDC_OPEN.
      CALL FUNCTION 'BDC_OPEN_GROUP'
           EXPORTING
                CLIENT = SY-MANDT
                GROUP  = 'Testsession'
                KEEP   = 'X'
                USER   = SY-UNAME.
      IF SY-SUBRC <> 0.
        MESSAGE E006 WITH SY-SUBRC.
      ENDIF.
    ENDFORM.
          FORM bdc_insert                                               *
    FORM BDC_INSERT.
      CALL FUNCTION 'BDC_INSERT'
           EXPORTING
                TCODE            = 'SE11'
           TABLES
                DYNPROTAB        = BDC_TAB
           EXCEPTIONS
                INTERNAL_ERROR   = 1
                NOT_OPEN         = 2
                QUEUE_ERROR      = 3
                TCODE_INVALID    = 4
                PRINTING_INVALID = 5
                POSTING_INVALID  = 6
                OTHERS           = 7.
      IF SY-SUBRC <> 0.
        MESSAGE E007 WITH SY-SUBRC.
      ENDIF.
      CLEAR: BDC_TAB.
    ENDFORM.
          FORM bdc_close                                                *
    FORM BDC_CLOSE.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
           EXCEPTIONS
                NOT_OPEN    = 1
                QUEUE_ERROR = 2
                OTHERS      = 3.
      IF SY-SUBRC <> 0.
        MESSAGE E008 WITH SY-SUBRC.
      ENDIF.
    ENDFORM.

    God I forgot to refresh Internal table after putting record into Session.
    Now I'm done.
    You guys be careful too.

  • No batch input data for screen  for VF01

    Hi All,
    Iam trying to to create billing document using  BDC for VF01 with  sales order. For single line item it is working fine and that to in Mode 'A'. But while  creating invoices using multiple sales orders  , Iam getting the following error.
    No batch input data for screen 'SAPMV60A' '0102' . Error  - 0344. 
    Kindly help me as I was strucked here.
    My code .
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Please <removed by moderator> help.
    Thanks ,
    Srikanth.A
    Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

    Hi Jurgen
      LOOP AT git_bdc INTO gwa_bdc.
       refresh messtab[].
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Error message population....
    REFRESH bdcdata[].
    ENDLOOP.
    Thanks,
    Srikanth.A

Maybe you are looking for