Batch joining of movies while adding chapters

I can not seem to find any good tools out there that will batch join video files while adding chapters.
I have 20 folders, each with 20-30 avi files. I want to be able to join each video clip in each folder into one movie while making the start of each clip a new chapter. I would also like to be able to use compressor to compress the video.
I have found a few that let me join them, but they either do not support chapters, or the chapters dont load in DVD Studio Pro.
Any advice?

Well if you are trying to join .avi and not .m2v then you can use pretty much whatever you want! FCP, Avid, Prem (coming back to mac), QT Pro etc.
Most encoders (Compressor, Bitvice etc) allow you input timecodes where you want chapters or add markers that dvdsp will recognise. If you do that you'll be able to add (or import with a marker list txt file) in dvdsp.
If you want to join m2v's then you can use MPEGAppend, Unix commands or the dvdsp timeline even...
-Jake

Similar Messages

Error while adding a job to scheduler

Hello,
I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
Thanks.
[Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.

Hi Rizwan Tahir ,
Delete the job server associated with the current batch job and recreate it.
Then try creating a new schedule using the new job server.
And take care that job server is created in QA environment.
Hope this should work.
Regards,

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

Error Code "-5002" While adding a Goods Issue Document

Hi,
While adding a goods issue document for only a specific combination of items I get "Internal Error (-5002) occured" message.
The scenario is i am adding 5 rows with following specification
Row1- Serial Managed Item
Row2- Batch Managed Item
Row3- Managed by none
Row4- Batch Managed Item
Row5- Serial Managed Item

Hi I had the same Issue,
What my problem solved was setting the baseline number for each serial and batch number on each specific line to the line number of that specific line.
like this:
doc.Lines.SerialNumbers.SetCurrentLine(doc.Lines.SerialNumbers.Count - 1);
doc.Lines.SerialNumbers.InternalSerialNumber = 2;
doc.Lines.SerialNumbers.BaseLineNumber = doc.Lines.SerialNumbers.Count - 1;
Regards

Restrict A User From Changing A Payment Term While Adding A/R Invoice

Dear Experts,
We want to restrict our users from changing payment terms while adding A/R Invoice.
We use SAP B1 2007 b.
Thanking you
Pradnya

Hi,
try below code in transaction notification procedure:
if (@object_type = '13') and (@transaction_type IN ('A', 'U'))
BEGIN
IF exists (select T0.DocEntry FROM OINV T0 Inner Join OCRD T1 on T0.CardCode=T1.CardCode Where T0.GroupNum !=T1.GroupNum and T0.DocEntry =@list_of_cols_val_tab_del)
          Begin
               SET @error = 30
               SET @error_message =N'You are not authorized to change payment terms'
          end
END
for how the transaction notification works or how to use :
check How to use Transaction Notification
Thanks,
Neetu

How to join quicktime movie fragments from the terminal?

Hello All,
I am looking for a way to join/concat .mov files into a single .mov file. We are currently using Quicktime Player to do this, but I am looking for a way to run the from a terminal in a script.(not AppleScript) How can I do this? Or if the easiest way to do this is with a short AppleScript/Droplet, how can I call that from a terminal and pass in the file list to concat?
Thanks

Freeware MPEG Streamclip (http://www.squared5.com/) includes an easy-to-use batch join utility. It's not run in Terminal, of course, but it's simple.

Need help with adding chapters

I like iMovie '08 for the quickness of scanning the video, however I'm hoping someone can explain the steps of exporting and adding chapters in garage band and then exporting that to iDVD. My ultimate goal is to create a dvd from my video footage and the dvd have scene selections. Also, will this cause quality loss (exporting/importing back and forth between programs). If there's another way to add chapters instead of in garage band, please let me know. Thanks.

1) First, create your movie in iMovie. Then Share it using Share to iTunes, Share to Media Browser, etc.
2) Now, Open GarageBand.
3) Select "Create a new music project" (not "create a new podcast episode")
4) Give your project a name and click "Create" (The time signature and all that stuff does not matter)
5) You might see a grand piano keyboard. Click the red dot at the upper left corner of the keyboard to get rid if it.
6) Now, at the bottom right corner of GarageBand, you should see a button for the Media Browser. Click it, and you should be able to find your movie.
7) Drag your movie from the Media Browser to the main garageband area where it says "Drag Apple Loops here". It will create a video track with thumbnails for skimming and an audio track.
8) At this point, you will also see a "Grand Piano Track" which is a default. You can delete it by selecting the Grand Piano track, and then clicking in the menus TRACK/DELETE.
Now, the only tracks remaining are your movie.
9) Select your Movie Track and you will see the pane below where you enter Chapter names. In GarageBand terms these are Markers.
10) Move the GarageBand playhead to the point in your movie where you want the first chapter. Click Add Marker. Your Chapter will have a default name of "Chapter 1" but you can click on it and change it. Make sure there is a checkmark by "marks a chapter" (not "marks a URL")
11) Repeat step 10 until you have all your chapters.
12) Now, click SHARE/SEND MOVIE TO iDVD, or SHARE/SEND MOVIE TO iTUNES, etc. depending on whether you are creating this for a DVD or for an iPod.
You are done.

Having issues adding chapters between chapters already selected

Hello,
I trying to create navigation on Encore by adding chapters between chapters I've already created and selected in Premiere. Let me explain more in detail what I'm trying to do. I have a two hour timeline that I divided in four chapters by using markers in Premiere, that works just fine when i create my dvd; but what I want to do it's add 3 minutes chapters between those four chapters already selected, so that when it plays on a dvd player, it can be rewinded or fast forwarded quicker, so that it can move 3 minutes back or forth during the process instead of going slowly throughtout the entire dvd.
I tried to use the feature "add chapters between intervals" but it creates chapters thoughtout the entire timeline replacing the ones already selected which I do not want.
Is there a way to do this with Encore without interfering. deleting, or replacing the created chapters in Premiere?
Please Help!
Thank you

I believe the answer is no. If you want to make a feature request, see this link:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I would suggest supporting the feature request here, since an export option would give you the ability to do what you want in a couple steps: http://forums.adobe.com/thread/587573?tstart=0
In your case, it won't take that long to record the current chapter locations, add the 3 minute option, then replace the 4 chapters, deleting any automatic chapters that are closer than you would like.

Problem while adding both Key And Focus Listeners to JTextField

Hi!
I have something peculiar while adding Key and Focus Listener to JTextField. Suppose i add just Key Listener then everything's fine and i could keep track of keys being pressed. But as soon as i add a Focus Listener to it with the code to select full text in focusGained() method, it starts reponding wrongly to arrow keys pressed and does not perform desired actions. For let arrow key it moves caret by one for the first time after that it does not resond to that unless caret is changed by using mouse. If right arrow key is pressed the it moves the caret to last position from wherever it is. For UP and DOWN it selects the full text(This should be done when it gets focus)
public void focusGained(FocusEvent fe)
setCaretPosition(0);
moveCaretPosition(getDocument().getLength());
Can someone help me out on this?
thanks and regards,
Amit.

None of those things will cause your JFrame to resize itself. And this is probably a good thing, because your JFrame shouldn't change size once you have created it. Why not create your JPanel so that it has enough space for you to add the component later? Or why not just add the component to start with and then enable it or make it editable when you decide that's necessary?

Error while adding A/P Credit Memo!

Error while adding A/P Credit Memo..........
'G/L Accounts' (OACT) (ODBC-2028) Message - 131-183
Please advice me .....
Thanks...

Hi
Check this thread this may help you.
[Re: AP Invoice - No Matching Account Error]
Regards
Balaji

Error while adding a connector for SSL..help!!!

i'm getting this error when i added a connector for SSL and restarted tomcat
my connector tag is
<Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
      <Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
    </Connector>
LifecycleException: Protocol handler instantiation failed: java.lang.NullPointe
rException
        at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
java:1368)
        at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:609)
        at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:2384)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
        at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Error while adding a webpart to a sharepoint

I need some help with adding a custom web part to the landing page. I created a new wsp file for the web part and tried to add it as a solution into the web galleries of the site settings. But I am unable to invoke this web part and it throws an error, “The
site collection containing this sandboxed solution has exceeded its daily resource usage quota”
The web part appears within the custom web part section when I try to add it into the page. As an FYI, I tries to modify the quotas and locks of the template being used within the site collection-> modify quotas and lock of the central administration
and have increased Sandboxed resource solution quota to 300 points but still it somehow doesn’t appear to change while adding the web part.
What am I doing wrong here?

Well, the issue was that while updating the quotas and locks for the sharepoint site I needed to select the web application and not the web farm. The resource did get increased to 300 points at the farm level but as I was using a sandboxed application
to be added as a web part, the target should have been the web application. I corrected this and then added the solution to the sharepoint and activated the solution. After which I was able to include the web part into the site. Hope this helped, do let me
know if anyone needs any further explanation.

Error while adding a record

I am getting the following error while adding record into the table CM_RECIPE_ITEM :
<h4> Error </h4>
ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
Error Unable to process row of table CM_RECIPE_ITEM.
Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
Thanking You,
Yogesh
<h4> CM_RECIPE_ITEM Table </h4>
CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
<h4>Global temporary table</h4>
DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
ROW_ID ROWID
ON COMMIT PRESERVE ROWS
NOCACHE;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
BEGIN
INSERT INTO interim VALUES (:new.rowid);
END;
<h4>Trigger to update data on CM_RECIPE table </h4>
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
BEGIN
FOR ds IN (SELECT row_id FROM interim) LOOP
UPDATE CM_RECIPE
SET CR_RMC = (
SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = CR_BOM_CODE
AND rowid = ds.row_id
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (
SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id
) + CR_RMC;
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN =
(SELECT CIFG_DP_RATE
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
END LOOP;
END;
/

The scripts of the tables CM_ITEM_FG, CM_RECIPE, CM_RECIPE_ITEM are as follows :
<h4>CM_ITEM_FG</h4>
ALTER TABLE COSTMAN.CM_ITEM_FG
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_ITEM_FG CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_ITEM_FG
CIFG_CODE VARCHAR2(13 BYTE) NOT NULL,
CIFG_CCG_ID NUMBER NOT NULL,
CIFG_NAME VARCHAR2(50 BYTE) NOT NULL,
CIFG_PACKING NUMBER NOT NULL,
CIFG_OVERHEAD NUMBER NOT NULL,
CIFG_OTHERS NUMBER NOT NULL,
CIFG_DP_RATE NUMBER NOT NULL,
CIFG_CR_BY VARCHAR2(32 BYTE),
CIFG_CR_ON DATE,
CIFG_UPD_BY VARCHAR2(32 BYTE),
CIFG_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_PK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE, CIFG_CCG_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_UK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_ITEM_FG_T1"
BEFORE UPDATE ON "CM_ITEM_FG"
FOR EACH ROW
BEGIN
BEGIN
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (CR_RMC + :NEW.CIFG_PACKING + :NEW.CIFG_OVERHEAD + :NEW.CIFG_OTHERS);
END;
BEGIN
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN = (:NEW.CIFG_DP_RATE - CR_TOTAL_COST) / CR_TOTAL_COST;
END;
END;
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_PK_001
PRIMARY KEY
(CIFG_CODE, CIFG_CCG_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_ITEM_FG_UK_001
UNIQUE (CIFG_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_FK_001
FOREIGN KEY (CIFG_CCG_ID)
REFERENCES COSTMAN.CM_COST_GROUP (CCG_ID));
<h4>CM_RECIPE</H4>
ALTER TABLE COSTMAN.CM_RECIPE
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE
CR_ID NUMBER NOT NULL,
CR_CCG_ID NUMBER,
CR_EFF_FROM DATE,
CR_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CR_BOM_CODE VARCHAR2(50 BYTE),
CR_QUANTITY NUMBER,
CR_RMC NUMBER,
CR_TOTAL_COST NUMBER,
CR_GROSS_MARGIN NUMBER,
CR_CR_BY VARCHAR2(32 BYTE),
CR_CR_ON DATE,
CR_UPD_BY VARCHAR2(32 BYTE),
CR_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_PK_001 ON COSTMAN.CM_RECIPE
(CR_CCG_ID, CR_ID, CR_CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_001 ON COSTMAN.CM_RECIPE
(CR_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_002 ON COSTMAN.CM_RECIPE
(CR_BOM_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_T1"
BEFORE INSERT ON "CM_RECIPE"
FOR EACH ROW
DECLARE
L_ID NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CR_ID IS NULL THEN
--SELECT CM_RECIPE_SEQ.NEXTVAL INTO L_ID FROM DUAL;
:NEW.CR_ID := CM_RECIPE_SEQ.NEXTVAL; --L_ID;
END IF;
:NEW.CR_CR_ON := SYSDATE;
:NEW.CR_CR_BY := nvl(v('APP_USER'),USER);
END IF;
IF UPDATING THEN
:NEW.CR_UPD_ON := SYSDATE;
:NEW.CR_UPD_BY := nvl(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE ADD (
CHECK ("CR_EFF_FROM" IS NOT NULL) DISABLE,
CHECK ("CR_CCG_ID" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_PK_001
PRIMARY KEY
(CR_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_RECIPE_UK_002
UNIQUE (CR_BOM_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
<h4>CM_RECIPE_ITEM</H4>
ALTER TABLE COSTMAN.CM_RECIPE_ITEM
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE_ITEM CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE_ITEM
CRI_ID NUMBER NOT NULL,
CRI_CR_ID NUMBER NOT NULL,
CRI_BOM_CODE VARCHAR2(50 BYTE) NOT NULL,
CRI_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_CIRM_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_SEQ NUMBER,
CRI_QTY NUMBER,
CRI_RM_COST NUMBER,
CRI_CR_BY VARCHAR2(32 BYTE),
CRI_CR_ON DATE,
CRI_UPD_BY VARCHAR2(32 BYTE),
CRI_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_ITEM_PK_001 ON COSTMAN.CM_RECIPE_ITEM
(CRI_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T2"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM"
FOR EACH ROW
BEGIN
IF :NEW.CRI_CR_ID IS NULL THEN
SELECT CR_ID INTO :NEW.CRI_CR_ID
FROM CM_RECIPE
WHERE CR_BOM_CODE = :NEW.CRI_BOM_CODE;
END IF;
END;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T1" BEFORE
INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
DECLARE
L_ID NUMBER;
SEQ NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CRI_ID IS NULL THEN
SELECT CM_RECIPE_ITEM_SEQ.NEXTVAL
INTO :NEW.CRI_ID
FROM dual;
END IF;
:NEW.CRI_CR_ON := SYSDATE;
:NEW.CRI_CR_BY := NVL(v('APP_USER'),USER);
SELECT (NVL(MAX(CRI_SEQ),0)+1)
INTO SEQ
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = :NEW.CRI_BOM_CODE;
:NEW.CRI_SEQ := SEQ;
END IF;
IF UPDATING THEN
:NEW.CRI_UPD_ON := SYSDATE;
:NEW.CRI_UPD_BY := NVL(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CHECK ("CRI_RM_COST" IS NOT NULL) DISABLE,
CHECK ("CRI_QTY" IS NOT NULL) DISABLE,
CHECK ("CRI_SEQ" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_ITEM_PK_001
PRIMARY KEY
(CRI_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CONSTRAINT CM_RECIPE_FK_002
FOREIGN KEY (CRI_CIRM_CODE)
REFERENCES COSTMAN.CM_ITEM_RM (CIRM_CODE),
CONSTRAINT CM_RECIPE_ITEM_FK_001
FOREIGN KEY (CRI_CR_ID)
REFERENCES COSTMAN.CM_RECIPE (CR_ID));
Yogesh

Error While Adding a Software Component

Hi All,
While adding a software component in the SLD, i am getting the below error. Can anybody please suggest me the possible reason for the same.
Storing changes to persistence failed. Please check both your J2EE engine and database are in a healthy running state. (Error: CIM_ERR_FAILED: [NWMss][SQLServer JDBC Driver][SQLServer]Could not allocate space for object 'BC_SLD_CHANGELOG' in database 'X7A' because the 'PRIMARY' filegroup is full.)
Also i would like to know what is a software unit in a SLD??
Thanks in advance,
Kulwant

Is there any DC checked in?

Batch joining of movies while adding chapters

Similar Messages

Maybe you are looking for