Batch Loader is not working
Hi,
I am using UCM on weblogic 10.3 and trying to upload contents through Batch Loader. Today while running the Batch Loader script i am getting the below exceptions. thx in advance.
Output of version and java home is as below:
[wlsuser@locadelvmpmodev bin]$ echo $JAVA_HOME
[wlsuser@locadelvmpmodev bin]$ java -version
java version "1.6.0_25"
Java(TM) SE Runtime Environment (build 1.6.0_25-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.0-b11, mixed mode)
==========================
java.lang.UnsatisfiedLinkError: /u04/Oracle/Middleware/Oracle_ECM/ucm/idc/components/NativeOsUtils/lib/linux64/7.2.1.0/libJniNativeOsUtils.so: /u04/Oracle/Middleware/Oracle_ECM/ucm/idc/components/NativeOsUtils/lib/linux64/7.2.1.0/libJniNativeOsUtils.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
java.lang.UnsatisfiedLinkError: /u04/Oracle/Middleware/Oracle_ECM/ucm/idc/components/NativeOsUtils/lib/linux64/7.2.1.0/libJniNativeOsUtils.so: /u04/Oracle/Middleware/Oracle_ECM/ucm/idc/components/NativeOsUtils/lib/linux64/7.2.1.0/libJniNativeOsUtils.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:337)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: java.lang.AssertionError: !syNativeOsUtilsNotLoaded
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:386)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:352)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:26)
at DynamicConverterInstallerFilter.initEnvironmentVariables(DynamicConverterInstallerFilter.java:283)
at DynamicConverterInstallerFilter.initEnvironmentVariables(DynamicConverterInstallerFilter.java:207)
at DynamicConverterInstallerFilter.doFilter(DynamicConverterInstallerFilter.java:61)
at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
at intradoc.server.IdcExtendedLoader.executeFilter(IdcExtendedLoader.java:462)
at intradoc.server.IdcExtendedLoader.extraAfterConfigInit(IdcExtendedLoader.java:152)
at intradoc.server.IdcSystemLoader.extraAfterConfigInit(IdcSystemLoader.java:481)
at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:463)
at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:336)
at intradoc.apps.shared.StandAloneApp.initSystem(StandAloneApp.java:276)
at intradoc.apps.shared.StandAloneApp.init(StandAloneApp.java:112)
at intradoc.apps.shared.AppLauncher.init(AppLauncher.java:234)
at BatchLoader.main(BatchLoader.java:82)
... 7 more
Caused by: java.lang.UnsatisfiedLinkError: intradoc.common.NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
at intradoc.common.NativeOsUtilsBase.getNativeVersion(Native Method)
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:382)
... 23 more
=====================
thx Jiri for your response but issue has been resolved. Actually earlier everything was working fine but all of sudden that day it stopped working. If you see the exceptions where it was referring "libJniNativeOsUtils.so" was 64 bit and when i replaced that with 32 bit, it started working.
It really surprises me why and how it got changed but and how everything was working earlier :)
thx anyways.
ajay
Similar Messages
-
SQl loader is not working in 10g but working in 9i
In My PC i have installed both 9i and 10g. could you please tell me why it is not working
"SQL loader is not working" is rather like "my car won't start" http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
The 9i Oracle Client install includes sqlldr. The 10g Oracle Client install does NOT include sqlldr. You'd have to do a "Custom" Install and specifically select "Oracle Database Utilities" to install.
See MetaLink Note#437377.1
Edited by: Hemant K Chitale on Dec 31, 2008 3:58 PM
Edited by: Hemant K Chitale on Dec 31, 2008 4:00 PM -
Middleware - Delta load is not working from CRM to R/3
Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga -
Batch processing does not work with action
Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any cluesYour action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions. -
Batch process does not work in one service, but worked in another.
Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000 -
Infopath form load rule not working in browser forms but works on Client
Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered -
RV042 Load Balancing not working correctly?
We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
WAN1 = Telepacific T1
1.5Mbps down and 1.5Mbps up
WAN2 = AT&T U-Verse
12Mbps down and 5Mbps up
I have it set to Load Balance, Primary WAN = WAN2
Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
Bandwidth is set to:
WAN1 = 1000Kbps upstream & downstream
WAN2 = 5040Kbps upstream & 12000Kbps downstream
It seems to pick WAN1 a lot of the time. Do I have something setup wrong?Ok, so what do you recommend? To setup binding for ports important to direct over say… WAN1 (my fast access) shall I also keep the bandwidth management set up as is, example:
For me it’s confusing because this config appears to be clear to me that has to control traffic the way I want .
Thanks for your response.
H Aragon
De: jasbryan
Enviado el: lunes, 20 de febrero de 2012 03:18 p.m.
Para: HECTOR MANUEL ARAGON
Asunto: - Re: RV042 Load Balancing not working correctly?
Home
Re: RV042 Load Balancing not working correctly?
created by jasbryan in Small Business Routers - View the full discussion -
my Loader Does Not Work. i am create loader with animation.
total animation are build a 100 frame.code should be write but
loader does not work .Please help................Not sure why you are doing it that way but here is a loader
script I use all the time that I got off a tutorial a while back it
is percent driven. You may or may not want to use it but you might
be able to modify it to your own need. It basuically displays the
percent in a dynamic text box and makes a movieClip named loadBar
expand based on percent loaded.
onClipEvent (enterFrame) {
loading = _parent.getBytesLoaded();
total = _parent.getBytesTotal();if (percent == undefined)
percent = 0;
percent -= (percent-((loading/total)*100))*.25;
per = int(percent);
percentage = per+"%";
loadBar._width = per;
if (percent>99) {
_parent.gotoAndStop(2); }
} -
Dear all,
I am using Flash8.
I create a loading progress as an example showed:
Frame1:
- put a movie named "bar_mc".
- Put this actionscript:
quote:
var pctLoaded:Number =
Math.round(this.getBytesLoaded()/this.getBytesTotal()*100);
bar_mc._xscale = pctLoaded;
Frame2:
- Put this action script:
quote:
if (this.getBytesLoaded() < this.getBytesTotal()) {
this.gotoAndPlay(1);
} else {
this.gotoAndPlay(3);
Frame3 and after that: put images
The example works.
But I got problem with situation:
- From frame3 and after that, I want to attach movie clips in
library instead of putting image directly into frame.
Then loading progress doesn't work any more.
- I found that: when I convert bitmap to movies in library,
loading progress will not work, even I still put images into frames
as above.
- I tried to change load bitmap instead of attach movies in
order to delete movies in library, loading still not work.
quote:
import flash.display.BitmapData;
var linkageId:String = "libraryBitmap";
var myBitmapData:BitmapData =
BitmapData.loadBitmap(linkageId);
trace(myBitmapData instanceof BitmapData); // true
var mc:MovieClip = this.createEmptyMovieClip("mc",
this.getNextHighestDepth());
mc.attachBitmap(myBitmapData, this.getNextHighestDepth());
- I think it is because images were set linkage (in order to
be specified when load image)
In summary, loading progress in frame1 only work when the
following frames don't contain action script and only put images
without linkages.
What problem did I meet?
How can I load images or movie in following frames and
loading progress still work?
Many thanks,
TuanVo.no, the only way to instantiate a movieclip that's in the
library is to use attachMovie() and you must have a linkage id to
use attachMovie().
to disable loading before the first first, right click your
movieclip in the library, click linkage and untick export in the
first frame. finally, place that movieclip on the main timeline
(way off-stage, generally) in a frame where you want it to load
(ie, after your preloader) and before you need to attach it. -
Jquery Loading Image not working at Page Load
Hi,
I developed a page using Jquery, want to load an image at the page load. I am using .show() and .hide() functions, but it is not working. I am using "async;false" in all my SPServices. Can i load the image without setting "async: true"?
shanthanHi,
According to your post, my understanding is that you had an issue about the JQuery loading image.
I think the issue is related to the browser. Did you use the IE 8?
The hide() and show() method not work in IE 8.
http://social.technet.microsoft.com/Forums/en-US/a8e17024-bea3-4cb7-8283-bcbcf8955e18/jquery-loading-image-issue?forum=sharepointgeneralprevious
http://stackoverflow.com/questions/21876416/show-hide-not-working-in-ie8-jquery
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
SQL*LOADER example not working for REF
I was working on the Oracle bulk load scripts using SQL*LOADER utility .
I have encountered an error while using the REF column option to resolve the parent-child referential integrity .
The example given in the URL http://www.csee.umbc.edu/help/oracle8/server.815/a67792/ch05.htm Example 5-9 Loading Primary Key REF Columns
does not work . and generates errors : 'SQL*Loader-418: Bad datafile datatype for column DEPT_MGR'
example :
Control File
LOAD DATA
INFILE `sample.dat'
INTO TABLE departments_alt
FIELDS TERMINATED BY `,' OPTIONALLY ENCLOSED BY `"'
(dept_no CHAR(5),
dept_name CHAR(30),
dept_mgr REF(CONSTANT `EMPLOYEES', emp_id),
emp_id FILLER CHAR(32))
Data file (sample.dat)
22345, QuestWorld, 007,
23423, Geography, 000,
Could you please suggest any solutions for this ?Some of the quotes are wrong
Try the sample from the 10.2 documentation
LOAD DATA
INFILE 'sample.dat'
INTO TABLE departments_alt
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
(dept_no CHAR(5),
dept_name CHAR(30),
dept_mgr REF(CONSTANT 'EMPLOYEES', emp_id),
emp_id FILLER CHAR(32)) -
Test Stand seq w/ dll batch file execution not working
I am using Test Stand 4.1, running a seq that calls a dll. The dll contains a batch file execution function that has not been working properly. I am not 100% sure what the function is as I do not have access to the direct code from which the dll was created. I believe I have a file, however please remember this is a guess that I am looking at the correct function/file.
This is a Pass/Fail test step that calls a batch file. The batch file runs properly without the use of Test Stand and called by the dll. In the code that I believe is running, I see there is a step that I am guessing does not run (see below for test steps). It seems as though these steps are being "stepped over" and not running, however the test does seem to be entering this function. The test reports a pass/fail status as the data is reported into a txt file. If the txt file contains the correct data, the test step reports PASS, even though the batchfile does not run.
:Note: [batchfile.bat] is the name of the batch file being called; the [ ] are not present
// Run Batch File
ChkErr(LaunchExecutableEx([batchfile.bat] ,windowState,&handle));
// Wait for batch file to complete task
do{
ProcessSystemEvents();
}while(!ExecutableHasTerminated (handle));
RetireExecutableHandle (handle);
Any one have any suggestions as to why the batch file is not being called and running properly?
Thank you
Jason_CThanks for the feed back. I have realized and it seems as though sometimes the CWD varies. The current working directory when the batch file does not run seems to be set to the desktop, not to the specified directory. The batch file is used to program a chip, calling the exe to run using commands. The file are speciifed by an absolute path, however the exe is not. The batch file is as below and seems to match up with a problem with the CWD. How can change though? I will have to check in the Start in field, but where can I find that property?
Thank You
--Jason
del ..\misc\mplab.txt
echo C:\Program Files\JTRS\01_P55461U\bin\uutsw\CR1_T2V3L_PMM_STUB_LOAD.hex
..\misc\pm3cmd /5 /BLCC:\Program Files\JTRS\01_P55461U\misc\t2v3l_pmm_stub_load\t2v3l_pmm_stub_load.pm3 /k /m /y /e >> ..\misc\mplab.txt >> ..\misc\mplab.txt
..\misc\pm3cmd /5 /BVCC:\Program Files\JTRS\01_P55461U\misc\t2v3l_pmm_stub_load\t2v3l_pmm_stub_load.pm3 >> ..\misc\mplab.txt -
Just got an iMac 400 MHz Slot loader. Slot loader does not work.
Ok, So I just bought an iMac 400 MHx G3 with AirPort Cart, 364 megs of ram, and It has OS 9.2 on it. I want to put panther on it, but the slot loading drive does not work right. It will suck in the disk, and the loader will make the "Rmm" sounds, and it spits it back out. I have took it apart, but I don't know. Can I use a try loader from my PowerMac G3? Can I get a slot load drive for a cheap price? Can I fix the current one? Thanks
Remember you must update the firmware from OS9 BEFORE attempting to install OS.
http://docs.info.apple.com/article.html?artnum=75130
Failure to do so can leave you with a non-working computer. -
Sticky load balancing not working because of Address Translation
This came up before - see below. I don't understand what the
soltion is/was.
WL Server puts it's ip address in the WebLogicSession cookie
which is an internal address 192.168.201.41
WL proxy knows WL Server only by an external address like 139.141.38.21. Since
it does not know of any WLS with an IP
address of 192.168.201.41, it round-robins the request instead
of sending it to the primary WLS.
Any help is much appreciated.
Mike Reiche
Robert Patrick <[email protected]> wrote:
>Hi,
>
>A very typical configuration is to put the web server in the DMZ (i.e.,
>between
>an outer and inner firewall) and proxy the requests from the web server
>to the
>WebLogic server (which sits behind the inner firewall). Since all of
>these
>proxied requests use HTTP and a single port, the only port that needs
>to be
>opened in the inner firewall is an HTTP port (the outer firewall will
>only need
>an HTTP and/or HTTPS port opened).
>
>Hope this helps,
>Robert
>
>Eytan Ben-Meir wrote:
>
>> Thanks Patrick,
>>
>> May be you can suggest options for securing a WLS behind a firewall?
>>
>> Thanks again,
>>
>> Eytan
>>
>> Robert Patrick wrote:
>>
>> > Hi,
>> >
>> > The problem is that we encode location information (e.g., IP address(es))
>> > in the session id. If the plugin sees a session id, it decodes the
>> > session id to find out where to route the request (i.e., which server
>in
>> > the cluster contains the HttpSession object for that session). Since
>the
>> > plugin cannot find the machine whose IP address is encoded in the
>session
>> > id (because of the network address translation), this will not work.
> In
>> > general, distributed application software needs to be modified to
>be
>> > capable of handling network address translation -- to my knowledge,
>> > WebLogic Server has not been modified to support this feature (though
>the
>> > Enterprise version of the product has had this support for years).
>> >
>> > Hope this helps,
>> > Robert
>> >
>> > Eytan Ben-Meir wrote:
>> >
>> > > Hi,
>> > >
>> > > Configuration:
>> > > WLS 4.5.1 on Solaris 2.7 inside a firewall.
>> > > SonicWall firewall with NAT (Network Address Translation).
>> > > Netscape Enterprise Server 4.0 outside the firewall with Weblogic
>> > > NSAPI-BRIDGE (sp 5)
>> > >
>> > > The problem:
>> > > When a browser request is sent to the NE web-erver (directed to
>the
>> > > firewall who then redirects to a Weblogic servlet).
>> > > IF The servlet creates a httpsession (with or without cookies)
>the
>> > > request fails (the firewall blocks a request directed directly
>at the
>> > > non-routable ip address of the Weblogic machine inside the firewall.
>> > > IF on the other hand the servlet does not create a http session,
>all
>> > > works fine.??????????
>> > > Does any body know something about this????
>> > >
>> > > Thanks,
>> > >
>> > > Eytan
>
This isn't my problem.
"Mike Reiche" <[email protected]> wrote:
>
>This came up before - see below. I don't understand what the
>soltion is/was.
>
>WL Server puts it's ip address in the WebLogicSession cookie
> which is an internal address 192.168.201.41
>
>WL proxy knows WL Server only by an external address like 139.141.38.21.
> Since
>it does not know of any WLS with an IP
>address of 192.168.201.41, it round-robins the request instead
>of sending it to the primary WLS.
>
>Any help is much appreciated.
>
>Mike Reiche
>
>Robert Patrick <[email protected]> wrote:
>>Hi,
>>
>>A very typical configuration is to put the web server in the DMZ (i.e.,
>>between
>>an outer and inner firewall) and proxy the requests from the web server
>>to the
>>WebLogic server (which sits behind the inner firewall). Since all of
>>these
>>proxied requests use HTTP and a single port, the only port that needs
>>to be
>>opened in the inner firewall is an HTTP port (the outer firewall will
>>only need
>>an HTTP and/or HTTPS port opened).
>>
>>Hope this helps,
>>Robert
>>
>>Eytan Ben-Meir wrote:
>>
>>> Thanks Patrick,
>>>
>>> May be you can suggest options for securing a WLS behind a firewall?
>>>
>>> Thanks again,
>>>
>>> Eytan
>>>
>>> Robert Patrick wrote:
>>>
>>> > Hi,
>>> >
>>> > The problem is that we encode location information (e.g., IP address(es))
>>> > in the session id. If the plugin sees a session id, it decodes
>the
>>> > session id to find out where to route the request (i.e., which server
>>in
>>> > the cluster contains the HttpSession object for that session).
>Since
>>the
>>> > plugin cannot find the machine whose IP address is encoded in the
>>session
>>> > id (because of the network address translation), this will not work.
>> In
>>> > general, distributed application software needs to be modified to
>>be
>>> > capable of handling network address translation -- to my knowledge,
>>> > WebLogic Server has not been modified to support this feature (though
>>the
>>> > Enterprise version of the product has had this support for years).
>>> >
>>> > Hope this helps,
>>> > Robert
>>> >
>>> > Eytan Ben-Meir wrote:
>>> >
>>> > > Hi,
>>> > >
>>> > > Configuration:
>>> > > WLS 4.5.1 on Solaris 2.7 inside a firewall.
>>> > > SonicWall firewall with NAT (Network Address Translation).
>>> > > Netscape Enterprise Server 4.0 outside the firewall with Weblogic
>>> > > NSAPI-BRIDGE (sp 5)
>>> > >
>>> > > The problem:
>>> > > When a browser request is sent to the NE web-erver (directed to
>>the
>>> > > firewall who then redirects to a Weblogic servlet).
>>> > > IF The servlet creates a httpsession (with or without cookies)
>>the
>>> > > request fails (the firewall blocks a request directed directly
>>at the
>>> > > non-routable ip address of the Weblogic machine inside the firewall.
>>> > > IF on the other hand the servlet does not create a http session,
>>all
>>> > > works fine.??????????
>>> > > Does any body know something about this????
>>> > >
>>> > > Thanks,
>>> > >
>>> > > Eytan
>>
>
-
Batch File is not working correctly
Hey Everyone,
I've got a batch file that I'm trying to get to work and seem to be running into difficulties on getting the whole batch file to work. I'm guessing that I have something missing or incorrect. What
I'm trying to accomplish is we currently have Java versions 7.0.45 both x64 & x86 platforms installs on all production client machines. My batch file will uninstall the x86 version of Java 7.0.45 and theninstall the
latest version of Java 7.0.51 x86 without any problems. It's the x64 that my batch file is running into problems and does not uninstall it or install the new version of java (7.0.51 x64).
Here's what my batch file looks like:
@ECHO OFF
cls
:KillIE&JavaProcesses
echo *** This will kill Browsers and Java Processes
Rem ***
taskkill /F /IM iexplorer.exe
taskkill /F /IM iexplore.exe
taskkill /F /IM firefox.exe
taskkill /F /IM chrome.exe
taskkill /F /IM jusched.exe
taskkill /F /IM jp2launcher.exe
taskkill /F /IM java.exe
taskkill /F /IM javaw.exe
taskkill /F /IM jqs.exe
rem cd x64
rem msiexec.exe /i jre1.7.0_51.msi /qn AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 EULA=1 /NORESTART /log c:\java_7_51_x64_install.log
rem cmd.exe /C rmdir "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs\Java" /S/q
rem cd..
cd x86
msiexec.exe /i jre1.7.0_51.msi /qn AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 EULA=1 /NORESTART /log c:\java_7_51_x86_install.log
cmd.exe /C rmdir "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs\Java" /S/q
The CM 2012 exemgr log shows that the batch file installed successfully. Please help.
Thanks!Can't really tell without you posting more details. Here are a few pointers:
Don't use relative paths such as CD X86. Use absolute paths instead:
CD F:\X86.
There is no process called "iexplorer.exe". It should be "iexplore.exe".
What is the point of spawning an extra command processor to remove a folder?
Why do you try to delete the Java folder twice?
Did you invoke the batch file from a Console so that you can see the messages it generates?
What were these messages?
Did you run the batch file under elevated admin privileges?
Try this version:
@ECHO OFF
echo *** This will kill Browsers and Java Processes ***
taskkill /F /IM iexplore.exe
taskkill /F /IM firefox.exe
taskkill /F /IM chrome.exe
taskkill /F /IM jusched.exe
taskkill /F /IM jp2launcher.exe
taskkill /F /IM java.exe
taskkill /F /IM javaw.exe
taskkill /F /IM jqs.exe
cd /d "F:\x64"
msiexec.exe /i jre1.7.0_51.msi /qn AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 EULA=1 /NORESTART /log c:\java_7_51_x64_install.log
rmdir "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs\Java" /S/q
cd /d "F:\x86"
msiexec.exe /i jre1.7.0_51.msi /qn AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 EULA=1 /NORESTART /log c:\java_7_51_x86_install.log
rem ??? rmdir "%PROGRAMDATA%\Microsoft\Windows\Start Menu\Programs\Java" /S/q
Maybe you are looking for
-
ITunes Won't Recognize iPhone / Crashes
Since Sept. 28, 2010, I've been unable to sync my iPhone with iTunes on my PC. iTunes exhibits one of the following symptoms: (1) iTunes is very slow to start; recognizes my iPod but not my iPhone; (2) iTunes locks up and crashes after startup; or (3
-
DECLARE @databasename AS NVARCHAR(128); SET @databasename = (SELECT MIN(name) FROM sys.databases WHERE name NOT IN ('master', 'model', 'msdb', 'tempdb')); WHILE @databasename IS NOT NULL BEGIN PRINT @databasename; SET @databasename = (SELECT MIN(
-
Going back to selection screen from Change mode in ALV.
Hello Gurus, I am working on a issue related to ALV where ALV becomes editable when user clicks on change button. The Change button is a custom button defined in application toolbar of ALV display. case ucomm. WHEN 'TBACK'. leave to screen 0. w
-
I want code on placing textbox and Jbutton in a cell of JTable.Please
Dear All, Iam doing project on swing and XMl iam using swing for fron end design. Here i have to use table in one cell i have to put textbox and button. please can any body send me the code. Pleae iam waiting for your valuable code. regards, surya
-
trying to run: Control Panel\System and Security\Backup and Restore > Create a system image failed. the first attempts produced the error message: A shadow copy could not be created. Please check "VSS" and "SPP" application event logs for more infor