Batch splitting images and getting proper output numbers
In making an ebook from scans, I need to do a double page scan, then split the image into two images, one for each page. I've had no problem with the splitting into right and left sides of the photo, but the output numbers MUST be such that a left image might have name of image0001 and the left side 0002. In other words, the left numbers must be odd consecutive numbers, 1, 3, 5... and the right numbers must be even consecutive numbers 2, 4, 6... - this I've been unable to do with the automate batch options. Is there any way to do this?
bob
Use Bridge to rename the files.
Right pages as even numbers is asking for trouble. I would think seriously about switching them. Stick with odds on the right if it's at all possible.
Similar Messages
-
I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
I have loaded light room several times and even exited computer for 8 hours. Still get error messageA search of this forum shows lots of threads where this issue of "error reading cache" is solved
-
I'm not getting proper output as per the Program
Hi Experts,
As i'm executing my ALV report regarding Customer Invoice on Production client I'm not getting proper output as per the program but when i execute the same report on Development client i'm getting proper output.
Can anybody tell me how can i resolve this problem on production client?
Actually i've updated my report on my old report but still i'm getting old output of my report on production client, Program is showing updated code but at execution i'm getting old output.FORM Z_CREATE_FIELD_CATALOG.
I_FCAT-FIELDNAME = 'BUKRS'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '00006'.
I_FCAT-SELTEXT_L = 'Comp.Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BELNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Document No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KUNNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Customer Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'NAME'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Customer Name'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GJAHR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000005'.
I_FCAT-SELTEXT_L = 'Fscl.Yr'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KOSTL'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000008'.
I_FCAT-SELTEXT_L = 'Cost Center'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'XBLNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000016'.
I_FCAT-SELTEXT_L = 'Invoice No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'SGTXT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Item Text'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BUDAT'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Posting Date'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'MWSKZ'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '0000010'.
I_FCAT-SELTEXT_L = 'Tax Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'TAXTXT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '0000015'.
I_FCAT-SELTEXT_L = 'Tax Description'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'G/L Account'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Net Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT2'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Tax G/L No.'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR2'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Tax Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT1'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Freight G/L No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR1'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Freight Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GROSS'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Gross Amount'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'PSWSL'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-OUTPUTLEN = '000004'.
I_FCAT-SELTEXT_L = 'Curr.'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
LS_SORT-UP = 'X'.
LS_SORT-FIELDNAME = 'BELNR'.
APPEND LS_SORT TO I_SORT.
CLEAR LS_SORT.
LAYOUT-ZEBRA = 'X'.
ENDFORM. -
Jarred swing app and getting console output
Hi,
I've created a jar app using eclipse that starts a swing application. The jar works fine, but I was curious if there was a way to double-click the file and get console output as well. When I start the program through the command line, I can get my output, but double-clicking the icon doesnt' start up a console. Is there a way to accomplish this?
ThanksNormally in Windows systems the javaw executable is assigned to the jar extension. javaw is a jvm without console. You might want to change that and assign java to jar but be aware, that this affects all jar files.
If you want to do that just for that jat file I would write a bat file which starts the application using java. -
Not getting proper output in .rtf format
Hi all i m getting this output when running request with an rtf template.o am working with XML publisher 4.5 and have developed template in microsoft word.
Here is the output
%PDF-1.4
5 0 obj
<<
/Type /Page
/Parent 3 0 R
/Resources 4 0 R
/Contents 6 0 R
/MediaBox[ 0 0 612.0 792.0 ]
/CropBox[ 0 0 612.0 792.0 ]
/Rotate 0
>>
endobj
6 0 obj
<< /Length 155 /Filter /FlateDecode >>
stream
x¿m¿!¿¿¿w`<¿¿¿VO¿¿¿¿<Ù¿¿¿¿¿ ¿04)¿¿¿j¿¿Z¿¿¿¿!¿I¿*¿¿PB¿¿¿¿b{¿¿*¿¿¿¿¿¿¿¿-¿¿ü¿¿C¿&T¿¿ndstream
endobj
1 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
2 0 obj
<<
/Type /Info
/Producer (Oracle XML Publisher 4.5.0)
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [
5 0 R
/Count 1
>>
endobj
4 0 obj
<<
/ProcSet [ /PDF /Text ]
/Font <<
/F0 7 0 R
>>
>>
endobj
7 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Helvetica
/Encoding /WinAnsiEncoding
>>
endobj
8 0 obj
[ 5 0 R /XYZ 84.6 604.4 null ]
endobj
xref
0 9
0000000000 65535 n
0000000401 00000 n
0000000456 00000 n
0000000534 00000 n
0000000602 00000 n
0000000010 00000 n
0000000168 00000 n
0000000678 00000 n
0000000783 00000 n
trailer
<<
/Size 9
/Root 1 0 R
/Info 2 0 R
/ID [<974c380ea692f8fdbdad4b9206bce756><974c380ea692f8fdbdad4b9206bce756>]
>>
startxref
832
%%EOF
any idea
naveenYour issue has nothing to do with upgrading to 5.0, it is a post script printer issue. That output that is printing to your printer is caused because PASTA is not setup correctly. You should be able to query Metalink for PASTA and get the proper setup steps.
Brett -
I need to parse a String and get only the numbers in the String.
I have a string like this
<div class="leader"><div class="leaderLeft">Top Wraps:</div><div class="leaderRight">4</div></div><br/><div class="leader"><div class="leaderLeft">Bottom Wraps:</div><div class="leaderRight">2</div></div><br/><div class="leader"><div class="leaderLeft">Spiral-Up:</div><div class="leaderRight">3</div></div><br/><div class="leader"><div class="leaderLeft">Spiral-Down:</div><div class="leaderRight">3</div></div><br/>and I need to get only those numbers out of it. I came up with a way to kind of do it using patterns and splitting the text but that doesn't help me because sometimes the string is a little different. Like this:
<div class="leader">
<div class="leaderLeft">Top Wraps:</div>
<div class="leaderRight">2</div>
</div><br/>
<div class="leader">
<div class="leaderLeft">Bottom Wraps:</div>
<div class="leaderRight">2</div>
</div><br/>
<div class="leader">
<div class="leaderLeft">Spiral-Up Wraps:</div>
<div class="leaderRight">3</div>
</div><br/>
<div class="leader">
<div class="leaderLeft">Spiral-Down Wraps:</div>
<div class="leaderRight">3</div>
</div><br/>It has paragraph spacers in it. Is there anyway to possibly do this. I have tried everything I could think of. Thanks a bunch guys.dothedru22 wrote:
The only problem I'm having is find tutorials working with strings with xpath. All the ones I've found were working with .xml files.That's the least of your problems. Just change the example so that instead of parsing from a file, they parse from a StringReader. -
How can I fix the error image and get the regular image to load?
Ever since the recent big update for Firefox I've been getting some sort of error for loading certain images.
Here: http://tinypic.com/r/103bf3l/8 I have put one of those sites that give that error
--The original image that is supposed to show is also available in that image
Certain sites give a different size of that error image, but it looks the most like an error triangle
I've already tried the troubleshoot of not loading images and none of the options worked
If someone has this problem or knows how to fix it, it would be a great helpSolution found:
The addon "Stylish" with the theme "Google two themes" interfered with the image loading of the sites. Disabling the theme was the solution. -
How to run commands like "ipconfig" and get the output in adobe AIR in windows?
import flash.desktop.NativeProcess;
import flash.desktop.NativeProcessStartupInfo;
if (NativeProcess.isSupported) {
var npsi:NativeProcessStartupInfo = new NativeProcessStartupInfo();
var processpath:File = File.applicationDirectory.resolvePath("MyApplication.whatever");
var process:NativeProcess = new NativeProcess();
npsi.executable = processpath;
process.start(npsi);
The above can only run a sub-application, but how to run an independent application(command) like ipconfig and get the result?Hi,
here is an example of running a net Use command line from AIR, unig the new NativeProcess. Hope it will help !
function launchProcess()
var file = air.File.applicationDirectory;
// set command path
file = file.resolvePath("C:/Windows/system32/net.exe");
var nativeProcessStartupInfo = new air.NativeProcessStartupInfo();
nativeProcessStartupInfo.executable = file;
// prepare command parameters
var args = new runtime.Vector["<String>"]();
args.push('USE');
args.push('W:');
args.push('/delete');
args.push('/y');
// set arguments
nativeProcessStartupInfo.arguments = args;
// add listeners to catch command outputs
process.addEventListener(air.ProgressEvent.STANDARD_OUTPUT_DATA, onOutputData);
process.addEventListener(air.ProgressEvent.STANDARD_ERROR_DATA, onErrorData);
process.addEventListener(air.NativeProcessExitEvent.EXIT, onExit);
// create and run Native process
process = new air.NativeProcess();
process.start(nativeProcessStartupInfo);
function onOutputData(ProgressEvent)
var processResults = process.standardOutput.readUTFBytes(process.standardOutput.bytesAvailable);
air.trace("Results: \n" + processResults);
function onErrorData(ProgressEvent)
var processResults = process.standardError.readUTFBytes(process.standardError.bytesAvailable);
if(processResults.search('password') > -1){
window.alert('Bad password');
air.trace("Errors: \n" + processResults);
function onExit(NativeProcessExitEvent)
air.trace("Process ended with code: " + NativeProcessExitEvent.exitCode); -
How to execute this Procedure and get the output?
I have created a Procedure the source code of the same is furnished below.
create or replace procedure vin_test( p_deptno IN number
, p_cursor OUT SYS_REFCURSOR)
as
v_res Emp%rowtype;
begin
open p_cursor FOR
select *
from emp
where deptno = p_deptno;
end vin_test;
Now, if i want to see the out put of this Proc
i will first set the Serveroutput on and then..
Exec vin_test(10);
I am getting an error saying wrong number of arguments,so can anybody tell me what parameter value should i pass on so that i can get desired output.
Thanks in Advance
OraCrazyIn sqlplus you can do like this.
SQL> create or replace procedure vin_test( p_deptno IN number, p_cursor OUT SYS_REFCURSOR)
2 as
3 v_res Emp%rowtype;
4 begin
5 open p_cursor for
6 select *
7 from emp
8 where deptno = p_deptno;
9 end;
10 /
Procedure created.
SQL> var lcur refcursor
SQL> exec vin_test(30,:lcur)
PL/SQL procedure successfully completed.
SQL> print lcur
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO DIV
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 10
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 10
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 10
7900 JAMES CLERK 7698 03-DEC-81 950 30 10
6 rows selected.Thanks,
Karthick. -
Run the Report as a Background job and Get the Output in Excel in Local PC
Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
VarlanirGUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
READ DATASET dsn INTO rec.
IF sy-subrc <> 0.
EXIT.
ELSE.
WRITE / rec.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD---- Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD------- Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\test.csv'
FILETYPE = 'ASC'
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17. -
Having trouble in running a unix command and getting the output
Hi,
I am trying to run a unix command from within the java code. I am not able to make it work. I am enclosing the code and the error message that I am getting. Any help is highly appreciated.
import java.io.*;
public class RunCommand {
public static void main(String args[]) {
String s = null;
try {
Process p = Runtime.getRuntime().exec("cat UNIX_ASCII_TEXT_FILE | A_UNIX_PROGRAM -d");
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader stdError = new BufferedReader(new InputStreamReader(p.getErrorStream()));
// read the output from the command
System.out.println("Here is the standard output of the command:\n");
while ((s = stdInput.readLine()) != null) {
System.out.println(s);
// read any errors from the attempted command
System.out.println("Here is the standard error of the command (if any):\n");
while ((s = stdError.readLine()) != null) {
System.out.println(s);
System.exit(0);
catch (IOException e) {
System.out.println("exception happened - here's what I know: ");
e.printStackTrace();
System.exit(-1);
}The error message that I am getting is
Here is the standard output of the command:
SLu|%%$$=
Here is the standard error of the command (if any):
cat: cannot open |
cat: cannot open A_UNIX_PROGRAM
cat: cannot open -dLooks like the cat command is working and not the pipe command and the command after the pipe. But when I run the UNIX command from the command prompt I get the expected result.You might read this article and see if its approach works.
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html -
Help! Want to read from a xl file and get an output voltage value!!!
Hello..
I`m a beginner, so please help..
My program should output an voltage value that is read from an xl-file with one collum. The most important is that each values in the xl graph should be read per iteration. So that the file is read over time. I want to use this xl file to controll the output signal over time.
Can anyone show me how this VI would look like, and what would the xl file look like??The easiest way to do this is to save your Excel file as a comma or tab separated text file and not the native Excel format. Then you can use Read From Spreadsheet File (on the File I/O palette). Using this, you can read the file all at once and then just have a 1D array that you can wire to a while or for loop so that with each iteration of the loop, you get one element in the array. A for loop automatically indexes an input array. Reading the file all at once will be more effecient that reading the file line by line.
-
Album artwork-how do i get rid of old low res images and get new artwork?
Before apple introduced the new artwork download, I spent ages searching the internet for album sleeves and copied them to itunes, but the quality of the images in some cases was very bad. I am trying to replace this artwork with the downloadable high quality images but I can't work it out. I have tried going to the itunes folder in the music section of the finder and deleting all album artwork and then starting a new album artwork download, but all my old crappy low res pictures turn up again after I have done it. Any clues please? I am sure I am missing something.
thanksSelect all the muisic you want to remove artwork from.
Right click - Get info.
iTunes willask if you wan tot edit info for multiple items at once. Click OK.
ONLY tick the box next to Artwork then Apply.
It should delete all artwork in those songs. -
Calling the standard program in program and getting its output in int table
Hi there,
I have a requirement, where I need to call the standard program (of transaction CJI3) in my Y program. CJI3 transaction produces a ALV GRID output. I need to use that data for further processing. I am getting following problems:
1. I tried to use SUBMIT ... EXPORTING TO MEMORY statement. I need to pass the company code for the selection, but the company code is in the dynamic selection. So not getting how to pass them.
2. Just a doubt. Can we export the ALV GRID to the memory an retrieve it back using import?
3. I did tried to use SUBMIT ..... statement using only the parameters which are on the selection screen. However the control went to CJI3 transaction and gave an error message 'Please select "from database" or "from archive" '. Did not understood that, any IDEA?
Or is there any other way with which I can accomplish my requirement of getting the data in my program to manipulate, other than SUBMIT.
Points will be rewarded.
Thanks,
Ganesh KhumseHi,
point 1:
SUBMIT ... EXPORTING TO MEMORY will never work, because it displays the information in an ALV grid and that grid is waiting for user interaction for manipulating the information.
point 2:
no, you cannot export the content of an ALV grid to the memory
point 3:
must you get records in an internal table or must you feed the transaction, so that this one performs a task ?? for first option read below and for the other option you might work with BDC and Transaction Recorder.
what you have to do is read the code of transaction CJI3 in order to understand what it does, where the information is read from and what is the internal table that passes the values to the ALV Grid. You might find a user exit in the code for manipulating that information or you might create an enhancement point if there´s no user exit. -
Capture image and get info from flv file
Hi everyone
would apprichate help from any one who can tell me how and is
their any batch software for win\linux that can prepare xml file
with movie length and jpg\gif image capture of one of the frames
(if i can set to to frame 20 and not 1 as dafualt) out of flv file.
its for academic fms project and we have thousands of courses
which we recorded and got them on flv, and need the data for the
catalog.
so - if any one can pls assist, got something ready or just
tell me how to do it, we really will apprichate it.
10x very much !FLVMDI will create the XML file for you (it will have
additional nodes, but it will have the info you need). FFMPEG will
extract the images for you.
I'm not sure if either of those programs do batch
runs.
Maybe you are looking for
-
my computer recently shut down and all of my itunes was lost. My ipad still has all of my songs on it. How can i download all of my music onto my new itunes. would i need a different acount?
-
FCP X 10.0.6 -- Preview in "Sound and Music" tab not working
All my folders (like Final Cut Pro Sound Effects and iLife Sound Effects and so on) show up correctly in the "Sound and Music" section, but I can't preview the files inside any more - neither by hitting the space bar nor by pushing the Play button in
-
Integrating existing file server with EP6SP9
hello everyone we are implementing EP6 SP9 portal for our SBU and we need to integrate our existing file server with portal in which we can upload documents and download existing documents. do we need to use content management to access this file ser
-
Hi, I am new to SAP MDM. I was just trying to mont the console(MDM_TestConsole) and was trying to start it by right clicking and start MDM Server. The system prompts me with this message below. *Error Starting: MDMTestConsole(MDM Server): The machine
-
LDAP (ADS Read-only) as UME Datasource
Hi Gurus! We have configured MS Active Directory (Read only) as our UME Datasource. When I look in the logs in NWA (Last 24 hours) I get the following error: application [webdynpro/dispatcher] Cannot send an HTTP error response [500 Application erro