Battery is dwindling after the update of iOS8 in 5S.
Battery is dwindling after the update of iOS8 in 5S.
I'm having the same problem with my battery after the 7.1.1. update. First off, my 5s is EXTREMELY slow to get a full 100% charge. It used to charge super fast. And now the battery drains even while on not being used. This morning, I woke up and it was on 21% and was hot to the touch.
Went to the Apple Store yesterday, they told me the battery itself is fine. They told me to turn off a lot of my settings for location services, backround refresh, etc. What's the point of having these features if I need to keep them turned off?
Called them today. I tried a factory restore. Let's see if this works. I'm praying Apple releases another update to fix this!
Similar Messages
-
Did anyone else's battery get worse after the 5.0.1 update?
my battery got worse after the update. did this happen to other people also
There are already many discussions about this.
https://discussions.apple.com/message/16691544
https://discussions.apple.com/message/16697579
https://discussions.apple.com/message/16695989
and many more -
Has a solution been found for the battery life problem after the Galexy S5 update?!
Andriod System and Andriod OS eating all of my battery causing in to drain 15%an hour after the update. Yes if have uninstalled all unnecessary apps and disable everything I can. Has a solution been found yet? I know Im not the only person who has had this problem from my research. Is there a fix?!
DONT do a Factory Reset. It will not help and is NOT necessary after an update.
Your issues are multi phased.
Go to Settings>Battery and see what is using the power
1) with a new Operating system, your phone will optimize the system and apps, this in itself can take a few days.
2) aside from that, you should try running the phone in Safe Mode as this loads only the core stuff necessary to run the phone.
3) if Safe Mode works then it Is one of your Third Party Apps and would be easy to track down
4) if it is one of the apps it is recommended that you uninstall them run the phone then start installing them slowly until you find the offending app
5) If running in Safe mode has NOT worked, then you need to deep dive a bit more. Open Settings>Apps and go to the ALL tab. Go in and start Force Stopping apps such as Camera, Sync etc...(the last Samsung update the Camera was frozen and would drain the battery pretty fast)
It is most likely a third party app causing the slowness. As a last resort you can bring your phone to a Best Buy and go to the Samsung Kiosk or Booth inside the store. These are manned by Samsung Employees and you would ask them to re flash your phone. They will plug it into their computer and load the software directly from their servers and not over the air. This would be the cleanest install you can get on these phones but it may not fix the issue if Samsung coded part of it incorrectly or if the camera app is not updated and is incompatible with Lollipop which is causing it to run continuously. -
After the update how do you click the apps to shut them off so battery isn't draining
After the update how do you shut down the apps so they aren't running in the background?
These apps aren't open; they are in a suspended state.
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
iOS: Force an app to close -
My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I can't copy and paste after i updated to ios8
I cannot copy and paste after i updated to ios8. Everything is slower and I can't connect to my home internet. Resetting does not help.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
I was updating my ipod touch to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours. I tried to let the battery drain then plug it into the computer but it doesen't recognize it when i connect it.
Please help!!!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.
If it happened after updating iTunes on the computer see:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If after updating the iOS on your iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Macbook battery not charging after software update
I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!Hi imi_uk,
I see you marked this question as "solved" is that the case?
If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility. -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
So I updated my iPhone 5s to version 7.0.6 yesterday, and now my iPhone music isn't working properly. It won't sync the playlists that I added after the update though when it's plugged in on iTunes it says that the music is synced. When I select a song in a playlist on the phone it shuffles through the playlists for like 3 seconds and picks a totally different song to play. I tried reinstalling iTunes, I tried restoring the iPhone, is it just a bug with the update? Nothing works. Any solutions are welcome.
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?Try a smc reset:
http://support.apple.com/kb/HT3964 -
My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on. Is there something in Settings that needs to be changed?
MetsFanGirl,
Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
LindseyT_VZW
Follow us on Twitter @VZWSupport -
After the update I am unable to log in to get iMessages. It says "Could not sign in. Please check your network connection and try again". My phone is connected to Wi-fi. What should I do?
Hi andrea110,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
The settings are the same for iOS 7:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755?viewlocale=en_US
Cheers,
- Judy
Maybe you are looking for
-
I am a windows convert to Mac. All my NLE experience is in Vegas. I'm doing a talking heads video, with a green screen key. I've got the key working in FCP and I have a library of HD looped backgrounds I want to use with it. Each background is about
-
Goto a specific frame on a scene
Hello everybody I was wondering: I know that we can access a frame by its name. For example: gotoAndPlay("Transition"). Can I have, in two different scenes, two Transition frames and access them by something like <gotoAndPlay("Scene1.Transition")> or
-
Error when exporting ABAP Programs and the Project
Hi All, I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots). - Screenshot 1 shows an error when exporting a Project. - Screenshot 2 shows an error when exporting ABAP Program(s
-
Do not trigger output type through BAPI
I have a custom program which modifies purchase orders using the BAPI 'BAPI_PO_CHANGE'. However, when the program modifies the POs, it also triggers the associated output types in the POs. We want to modify the purchase orders using the custom progra
-
Hi , I want to create a table in web dynpro ABAP where user will enter data and submit the adobe form the user can also increase the rows of the table , please provide me some code or help link. Thanks & Regards Gaurav Jain