BDC for Entering Invoice(MIRO) Problem

Dear All,
I am preparing a BDC for Entering Invoice (Tcode- MIRO ) & facing problem.
During recording in PO reference tab i am using Bill of Lading and inserting data through More Allocation Criteria tab and in column cell entering 8 Reference at one time for more i am scrolling it and entering 8 more and adopting it.
In recording after adopting it is showing all adopted documents but on saved recording it is adopting latest 8 reference.
I coding for "P++" for scrolling but it is not working.
Please help me out.
Is it possible to code for scrolling of PO reference Bill of Lading pop of window.?
Thanks & Regards,
Varun

Hello Suhas,
No, not at all. We see that so many times in the forum that we are mistaken.
There are 3 places where we find P++, P--, etc. :
- the function codes assigned to the scrolling buttons in the standard toolbar for ABAP lists.
- If I remember well, they are also assigned to the buttons inside the screen for the table control wizard.
- SCROLLING_IN_TABLE
But usually, we don't create buttons inside screens for scrolling.
Table control scrolling via page down and page up keys, is made of 2 things : changing CXTAB_CONTROL-TOP_LINE + trigger enter key.
I know 1 note which talks about that : [187946 - No positioning on PRT overview in routing|https://service.sap.com/sap/support/notes/187946]
Sandra

Similar Messages

BDC for Entering Invoice Problem

Dear All,
I am preparing a BDC for Entering Invoice (Tcode- MIRO) & facing problem.
During recording in PO reference tab i am using Bill of Lading and inserting data through More Allocation Criteria tab and in column cell entering 8 Reference at one time for more i am scrolling it and entering 8 more and adopting it.
In recording after adopting it is showing all adopted documents but on saved recording it is adopting latest 8 reference.
I coding for "P++" for scrolling but it is not working.
Please help me out.
Is it possible to code for scrolling of PO reference Bill of Lading pop of window.?
Thanks & Regards,
Varun

Hello Suhas,
No, not at all. We see that so many times in the forum that we are mistaken.
There are 3 places where we find P++, P--, etc. :
- the function codes assigned to the scrolling buttons in the standard toolbar for ABAP lists.
- If I remember well, they are also assigned to the buttons inside the screen for the table control wizard.
- SCROLLING_IN_TABLE
But usually, we don't create buttons inside screens for scrolling.
Table control scrolling via page down and page up keys, is made of 2 things : changing CXTAB_CONTROL-TOP_LINE + trigger enter key.
I know 1 note which talks about that : [187946 - No positioning on PRT overview in routing|https://service.sap.com/sap/support/notes/187946]
Sandra

Problem in BDC for F-02 -- Currency Problem

Dear Experts,
I have written a BDC for F-02 to upload the opening balances of vendors.
Problem is , this BDC is for Libya country, where decimal places is 3.
Now when i run my BDC, if the amount is 22.54, it will upload it as 22.540, which is ok, but if the amount is 22.543, it upload it as 22.540 instead of 22.543.
can one provide some guidance in this....
Regards,
Maverick

Hi
The output format of an amonut is managed by the currency, you shouldn't have any particular problem,
In BDC program the field to be used to transfer the amount has to be char, so probably the easier solution is to write it into the bdc field in according to the currency:
WRITE <AMOUNT> CURRENCY <CUURENCY> TO <BDC FIELD>.
Max

BDC FOR VENDOR INVOICE FB60

Hi,
I need to make a BDC to upload transaction data for Vendor invoice thru fb60. Can someone help me with making this BDC. I have multiple invoice line items where G/L Accounts can be same for multiple line items.
plz any help soon will be appreciated ...

hi Raj,
Here a Example:
report ZTEST
no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=DUMMY'.
perform bdc_field using 'RF05A-BUSCS'
'R'.
perform bdc_field using 'BDC_CURSOR'
'INVFO-XMWST'.
perform bdc_field using 'INVFO-ACCNT'
'4711'. "LIFNR
perform bdc_field using 'INVFO-BUDAT'
'07.07.2006'.
perform bdc_field using 'INVFO-WRBTR'
'1000'.
perform bdc_field using 'INVFO-WAERS'
'EUR'.
perform bdc_field using 'INVFO-XMWST'
'X'.
perform bdc_field using 'INVFO-MWSKZ'
'V4'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'RF05A-BUSCS'
'R'.
perform bdc_field using 'BDC_CURSOR'
'INVFO-XBLNR'.
perform bdc_field using 'INVFO-ACCNT'
'4711'. "LIFNR
perform bdc_field using 'INVFO-XBLNR'
'test'.
perform bdc_field using 'INVFO-WRBTR'
'1.000,00'.
perform bdc_field using 'INVFO-XMWST'
'X'.
perform bdc_field using 'INVFO-MWSKZ'
'V4'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'INVFO-BLDAT'
'07062006'.
perform bdc_field using 'INVFO-XBLNR'
'TEST'.
perform bdc_field using 'ACGL_ITEM-HKONT(01)'
'467000'.
perform bdc_field using 'ACGL_ITEM-WRBTR(01)'
' 1000'.
perform bdc_field using 'ACGL_ITEM-KOSTL(01)'
'1000'.
perform bdc_transaction using 'FB60'.
perform close_group.
OR Also u can use the
U can use the std batchinput RFBIBL00 (or a BAPI, like BAPI_ACC_DOCUMENT_POST ) instead of to write an own BDC program for FB60.
FB60 is enjoy trx and it couldn't support the BDC for all its functionalities.
For more infor abt the BDC
http://www.sap-img.com/abap/learning-bdc-programming.htm
Assing the points if helpfulll
ranjit
null
null

User exit for incoming invoice - MIRO/MB60

Hi,
Can anybody suggest me the user exit to set the payment block during the creation of incoming invoice document through MIRO(With PO reference) / FB60 (With out PO reference).
Kindly dont run the program and send the list of the exists.
Thanks
Suri

HI Suresh,
Just execute this report and enter input value as FB60 then it will display alll the user exits related to this t-code.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Hope this helps you. reply for queries.
Regards,
Kumar.

Layout for entering invoice

Hi,
How can the layout on the miro screen adjusted and saved as per our own requirement.
Eg. few columns to the extreme right I need to bring to the start so that to have a ease in viewing/entering data
My second question is does SAP allow entering PO invoicess for 2 POs having different vendors and why it allowas so?
Regards,
MB

hi,
There is no any functionality like "Define screen layout" for MIRO transaction.....
Take help of ABAPer who can resolve your problem via coding....
you can never ever do a MIRO for 2 vendors at a time.....
Miro trasaction is possible for only one vendor at a time....
and if thinking logically its abs correct...why do you need to pay to two vendors at a time..there may be different tax, freight calculation which is placed header....
hope it helps....
Regards
Priyanka.P

Invoice(miro) problem

Dear all,
We have created po with freight cost while doing miro for po freight cost Ex 200.rrs for this excise duties are calculating for freight cost how to deactivate the duties.
Following are the prices
Poqty-10
Price-1815 per each piece
toatl-18,150
duties bed 10%-1815
edycess 2% -36.30
S& Heducess-18.15
total-20,019.45
cst 2%(nondeductabele)-400.39
feright-200.55
while making miro foeewing wntries are created
vendor-credit-20620.309
gr/ir-18550.39-debit
feright-clearing-200.55-v0 taxcode
cenvatclearing bed-1815debit
cenvatclearing edcess-36.30debit
cenvatclearing scess-18.15 debit
again here for freight
cenvat clearing 2% on freight basevalue -0.40debit(taking 10% freight value is 20.55))-v0 taxcode
cenvat clearing 1%on freight base value-0.20-vo tax code
Please help on this
Regards,
Bhaskar

closed

Problem in bdc for 'miro' t.code

hi , experts I got following error when i do bdc recording for purchase invoice , MIRO transaction. pls help me.
field invfo-zfbdt does not exist in the screen SAPLMR1M 6000.

this field is exist. folwing code is also generated.
perform bdc_field using 'INVFO-ZFBDT'
'24.11.2009'.

Not able to scroll up in BDC for J1IJ

Hi,
I am trying to create a BDC for J1IJ transaction.The problem comes if there are multiple excise invoices for a delivery document (program SAPMJ1IJ screen 400). For the first line item ,the scroll is initialized automatically to the first record in program SAPMJ1IJ screen 0500 as shown below.
The problem occurs while selecting the excise invoice after the first line item in program SAPMJ1IJ screen 400. The problem is that the scroll bar in this screen is not on the top but somewhere in between.As a result of which the BDC program cannot determine the quanity to be selected from the actual quantity.Refer to below screen for the position off the scroll bar.
Can anyone tell me the function code or some solution of how to initialize the scroll bar at the top for the table control?
Thanks in advance.

Hi Subhabrata,
Try using this BAPI: BAPI_EXCINV_CREATE_FROMDATA
Regards,

MIRO take long time when enter invoice for PO with GR-based invoice

Hi,
In my client system, system take long time for extracting PO data while booking invoice via. MIRO for the purchase order which have GR-based IV is marked. However system take few second for extracting PO data when enter invoice via. MIRO for the PO which don't have GR-based IV. Please note following point while providing the solution:
- this problem is exist only for the purchase order related to one company code. However system working perfectly for other company code in the same client. Hence we assuming that some company code level cofiguration is missing.
- the problem is exist for po with account assignment K.
- we have one to one mapping for purchase organization to company code to plant.
Appreciate for you quick respond. Thanks in advance.
Regards,
sp sahu

Hi,
Please check with FI guy for GL A/c and Cost centers which you are using to create the PO with item category K.
Still problem permits check with your ABAP person.
Regards,
Mohd Ali.

Problem in BDC for MIRO.....................

Hi friends,
I am using BDC for MIRO....In screen number 6220 where POs and items are to filled in table control where i need to fill 100 records... When i am using page down option during recording it is capturing function code as /OO .But while running BDC program this function code /OO is becoming ineffective..means page down is not happening when '/OO' is executed....can anybody help me out in what can be done in solving the problem...
Regards.

Hi Raju,
But our requirement is to to do the recording only till all the items are filled in the pop up screen..As no page-down button is available in the screen...i guess that is why page-down activity done from key-board is not working fine......Any suggestions from ur side........
Regards.

Problem in Set Check for Duplicate Invoices

Hi,
I have did all the required setting s for check duplicate invoice , but when i do miro , its not giving any error or warning msge.. i did all the config as per blw link..
FYI- in migo, i have entered the 3434 as a invoice ref # in delveriy note column and while doing miro , i have entered 3434 in ref column and give the 3434 as a dlvery note # in item tab .. but its not giving any error?
Pls guide, where the mistake has gone wrongly??
Problem in Set Check for Duplicate Invoices
Edited by: UJ on May 15, 2009 1:45 PM

Hello,
Hope you have done all the required configurations for the checking of double invoice and ticked the vendor for the double invoice checking in vendor master record.
You have to understand the way the system does the double invoice check.
As per the configuration, if the system identifies an invoice for a vendor whose double invoice check is activated, at the time of MIRO, system will update a separate table.
So system will check for the double invoice entry among the invoices entered after making the tick in the vendor master.
i meant to say that, if you are introducing this double invoice check in between the transactions, the check will be valid only for the invoices entered after the activation of double invoice check.
Regards

Problem in bdc for table control for line items

Hi experts,
I am runnig a bdc for ME52.
i am just entering PR number, in the second screen i have got all the line items. I need to select these line item 10 and double click or hit enter, it takes me to screen 3, there im just checking a checkbox and saving.
Again i need to select the line item 20 and double click or hit enter. again the same process.
Again repeat for all the line items.
But my problem is it is updating everytime for only line item 10. for line item 20 and others it say "no chnge in the data".
I am pasting my code here. please check and revert me back .plz.
DATA: w_output LIKE LINE OF i_output.
REFRESH I_ITAB[].
SELECT * FROM EBAN
           INTO TABLE i_itab
           WHERE banfn in s_banfn AND
                 bsart in s_bsart AND
                 bstyp in s_bstyp AND
                 matnr in s_matnr AND
                 werks in s_werks AND
                 lfdat in s_lfdat AND
                 pstyp in s_pstyp AND
                 knttp in s_knttp AND
                 estkz in s_estkz AND
                 loekz eq ' '.
IF sy-subrc = 0.
    CLEAR: w_itab,
             i_poitab[].
    SORT i_itab by banfn.
    LOOP AT i_itab INTO w_itab where menge GT eban-bsmng.
      IF p_close = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = 'X'.
          w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_rep = 'X'.
        IF w_itab-ebakz = ' '.
          w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_close = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = ' '.
          APPEND w_itab to i_poitab.
        ENDIF.
      ELSEIF p_open = 'X' AND p_repw = 'X'.
        IF w_itab-ebakz = 'X'.
          APPEND w_itab to i_poitab.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
LOOP AT i_poitab into w_output.
    APPEND w_output to i_output.
   PERFORM CALL_BDC.
endloop.
IF p_rep = 'X'.
PERFORM CALL_BDC.
ENDIF.
ENDFORM.                    " GET_DATA
*&      Form CALL_BDC
      text
--> p1        text
<-- p2        text
FORM CALL_BDC.
DATA: seltab(5) TYPE N,
      seltab1(2) TYPE N,
      tempvar(30) TYPE N,
      cnt TYPE N.
LOOP AT i_output.
clear: seltab,
       seltab1.
seltab = i_output-bnfpo.
seltab1 = seltab+2(2).
perform bdc_dynpro      using 'SAPMM06B' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-BANFN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'EBAN-BANFN'
                              i_output-banfn.
perform bdc_dynpro      using 'SAPMM06B' '0106'.
clear tempvar.
*cnt = 1.
concatenate 'EBAN-BNFPO(' seltab1 ')' into tempvar.
perform bdc_field       using 'BDC_CURSOR'
                             'EBAN-BNFPO(seltab1)'.
                                tempvar.
perform bdc_field       using 'BDC_OKCODE'
                              '=DETA'.
perform bdc_field       using 'RM06B-BNFPO'
                              i_output-bnfpo.
perform bdc_field       using 'RM06B-TCSELFLAG(seltab1)'
                             'X'.
perform bdc_dynpro      using 'SAPMM06B' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'EBAN-EBAKZ'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'EBAN-EBAKZ'
                              i_output-ebakz.
CALL TRANSACTION 'ME52' USING bdc_data MODE 'A'
                               MESSAGES INTO i_bdcmsg.
    COMMIT WORK AND WAIT.
ENDLOOP.
ENDFORM.                    " CALL_BDC
*&      Form bdc_dynpro
      text
     -->P_0686   text
     -->P_0687   text
FORM bdc_dynpro USING    program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro   = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
CLEAR bdc_data.
ENDFORM.
thanks,
N

Looks like table control logic is wrong -- do compare with below program...
only table contril area
REPORT ZPadmam
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Thanks
Seshu

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Problem while doing bdc for fv60

Hi frends,
I got problem while doing BDC for fv60 tcode.i have given
header items:
vendor number
invoice date
posting date
amount
item data:
g/l acc no: 100000
amount 1000 whatever
these are all given in recording
in recording after all giving this data if we click on park it is telling "parking not possibe duiring batch input".
can any body tell me the process for recording shdb and after that in bdc how can we give multiple line items for fv60
thanks,
naveen.

I don't think you can use FV60 in batch input. Your options are to use transaction FBV1 or bapi BAPI_INCOMINGINVOICE_PARK.
Rob

BDC for Entering Invoice(MIRO) Problem

Similar Messages

Maybe you are looking for