BDC problem in background?

Hi,
I am running the BDC on t code FB05 and its running fine in foreground mode , but in background it throws the error Screen not Found.
After passig the screen also , then it says that for line item 2 G?l is mandatory. Now how to select the second line item.
I recored the BDc and for that '=PI' ok code is there that slect second line item. but in background its not doning that?

Hi, It its a line control the fill the items as below:
LOOP AT IT_WBS.
    CLEAR : L_FNAM.
    L_COUNT = L_COUNT + 1.
    PERFORM BDC_DYNPRO USING 'SAPLCJSS' '0901'.
    PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
    PERFORM BDC_FIELD USING 'BDC_SUBSCR' 'SAPLCJSS                                0902LISTE'.
    L_CTR = L_CTR + 1.
    CONDENSE L_CTR.
    IF L_CTR < 10.
      CONCATENATE '0' L_CTR INTO L_CTR.
    ENDIF.
    CONCATENATE 'PRPS-FAKKZ(' L_CTR ')' INTO L_FNAM.
Endloop.
For each line item increas the Counter to +1.
Also use p+ code once u fill all the lines in screen to scroll the data into next screen.
PERFORM BDC_FIELD USING 'BDC_OKCODE'            '=P+'.
Thanks
Piyush

Similar Messages

BDC problem with F-30

Hi All,
I want to record a BDC for F-30 to clear the deduction line items for a Document. These deduction line items have a "Reason code" with it... When I select a Document Number in F-30, it displays all the line items in a table control.. I need to select and clear only those items with "Reason code" in that...
How can I select a line item from the table control and clear it based on the reason code in a BDC?
I have looked at the previous posts... I have seen a solution provided by filling the structure BSELP. How this can be included in the program and how to fill the values... Is there any limit for the values to get it filled?.. Because I could see
FELDN_1 to FELDN_18 in BSELP structure.....
BDC problem in F-30
BSELP-FELDN_1 = "BELNR"
BSELP-SLVON_1 = "00002222221997003"
How the rfbibl00 program works?
Thanks for the help,
Asha

Hi,
    Use BAPI_PAYIT_POST_CLEARING
or FM POSTING_INTERFACE_CLEARING
or
try this code for transaction fb05:
DATA: BEGIN OF bkey OCCURS   0,
        belnr LIKE bseg-belnr,
        gjahr LIKE bseg-gjahr,
        buzei LIKE bseg-buzei,
      END OF bkey.
*Dynpro 122 - Header
    PERFORM bdc_dynpro USING 'SAPMF05A' '0122'.
    PERFORM bdc_field USING 'BKPF-BLDAT' agz-datum.
    PERFORM bdc_field USING 'BKPF-BLART' augblart.
    PERFORM bdc_field USING 'BKPF-BUKRS' htab-bukrs.
    PERFORM bdc_field USING 'BKPF-BUDAT' agz-datum.
    PERFORM bdc_field USING 'BKPF-WAERS' t001-waers.
    IF t003-xmref = 'X'.
      IF htab-xblnr <> space.
        PERFORM bdc_field USING 'BKPF-XBLNR' htab-xblnr.
      ELSE.
        PERFORM bdc_field USING 'BKPF-XBLNR' text-aag.
      ENDIF.
    ENDIF.
    UNPACK vorgang TO zeile.
    PERFORM bdc_field_loop USING zeile 'RF05A-XPOS1' 'X'.
    PERFORM bdc_field USING 'BDC_OKCODE'     'SL'.
    LOOP AT itab WHERE marked = 'X'.
*Dynpro 0710 -
      PERFORM bdc_dynpro USING 'SAPMF05A' '0710'.
      PERFORM bdc_field USING 'RF05A-AGKON' agku-kunnr.
      PERFORM bdc_field USING 'RF05A-AGBUK' agku-bukrs.
      PERFORM bdc_field USING 'BDC_OKCODE'     'SLB'.         "ins
*Dynpro 0733 - insert fi-document-nr.
      PERFORM bdc_dynpro USING 'SAPMF05A' '0733'.
      CLEAR:   zeile, cnt.
      LOOP AT htab WHERE agzif = agc-nr AND xfeld = 'X'
                    AND bukrs = agku-bukrs AND kunnr = agku-kunnr.
        CLEAR bkey.
        cnt = cnt + 1.
        UNPACK cnt TO zeile.
        PERFORM bdc_field_loop USING zeile 'RF05A-FELDN' 'BELNR'.
        MOVE-CORRESPONDING tab TO bkey.
        PERFORM bdc_field_loop USING zeile 'RF05A-SEL01' bkey.
      ENDLOOP.
<b>Reward points</b>
Regards

Problem in Background Job. Job Completed Successfully but data not Posted

Hi All,
There is a problem in Background Job in Production server (600).
The job completed successfully but data not posted.
The same Job was working perfectly till the starting of the May month.
but now it is not working and rebate has not been posted.
Where to check and what to check
Pls suggest.
Regards,
P Kamal

Hi ,
Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and
check out, whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
If it has some error in Job Log then let me know the error.
Regards,
Uma

BDC Problem : Tcode : F-30

Hi All,
BDC Problem :
Iam working with Tcode : F-30.
Iam able to post the the document in All (A) screen mode
But Iam unable to post the document in No (N) screen mode
Please let me know how to solve this issue
Thanks
Sunil

HI,
R u getting any errors while creating using 'A'.
If not then use commit work after BDC.
Thanks

How to schedule BDC program in background when we use GUI_UPLOAD

Hi,
I need to run the BDC program in the back ground. But my flat file is in presentation server and i am using GUI_UPLOAD F.M to upload data into I.T. How to schedule BDC program in background.
Will anybody help me in this regards.
Thanks in advance,
Mythily

You will either have to put your data file on the application server or make the directory of the presentation server available as part of the file system so that the background job will have access to it via OPEN DATASET... TRANSFER... CLOSE DATASET.

Problem with background formatting in pivot table

Hello,
I have a problem with background formatting in pivot table. I can't change background (light blue rectangular in upper left corner). Do you have any idea how to do it?
Here is the link to the picture of the pivot table:
http://img163.imageshack.us/img163/110/unledfyq.png
I would be grateful for any help.
Regards,

Hey,
Check this link once, you will need java script to acheive this:
http://everythingoracle.com/obieehdom.htm
scroll down to this topic: Parsing using HTML DOM
Please award points if helpful.
Thanks,
-Amith.

After running a BDC program in background, next

After running a BDC program in background, next
day morning when you see the results, few records
are not updated(error records). What will you do
then?
plx explain clearly

In that BDC u have to process like this .
1.call transaction
if sy-subrc ne 0.
get the records.
endif.
2.Create a new Session with Failed records , So u can process there after.
Regards
Prabhu

Re: Problem using Background Images

Newbie is trying to use a background image inside a table. It seems that if the table size is larger that the original image itself; then the table has a blank space where the image does not show; and if the table is smaller than the image; then the background image has a cropped appearance. What do we have to do to correct this problem?

Background images do not stretch to fill their container. At least they don't do this yet (reliably). That's just the way it is. Most people will fill the remaining space with a color similar to the overall image color, when the image is too small to fill the background. When it's too large? Well, that's just the way it is.

While using a BDC in the background for some documents its hanging.

Hi All,
I had used BDC call transaction program and i am scheduling the program in the background. Normally it works fine but for some quotes it hangs and takes a long time. So its not going to other quote. Any solution how to kill the hanged quote and goto next one?

Well, then you need to determine why (for which orders), the process is hanging. Compare with other orders, do a performance check, etc. There is no way for us to determine what the problem in this particular case is. We just don't have enough information to help you out here.

Problem in background session processing

Hi Experts,
I am performing BDC by batch input session method.
I acheved BDC by traditional recording method and able to create batch input session in SM35.
Whenever I process batch input session in FOREGROUND it processes successfully.But whenever I processes it in BACKGROUND it throws an exception
runtime error.
This recording is for transaction CK74.this transaction screen contains some table controls.Error is "Control Framework: fatal error: GUI cannot be reached".
Please let me know if anybody has solution for this.
Thanks,
Yogesh.

Hi yogesh,
I think u might be using the function module upload or ws_upload to upload the data to the internal table. Try to use GUI_UPLOAD, while processing the session on background.
I think it will solve ur problem.
Regards...
Arun.
Reward points if useful.

VF01 BDC PROBLEM

Hi.
I have a BDC code which runs fine using call transaction VF01 and Mode = 'A'.
But when I run it in Mode = N, its not executed. Invoice is not created.
Any idea?
I tried with other options like Update = 'S' and 'A' and 'L'.
My code is as below ::
FORM GET_OPENORDERS.
SELECT VBELN ERDAT VKORG LFART FROM LIKP INTO TABLE ITAB_LIKP WHERE VKORG = '3010'.
SELECT VBELN XBLNR FROM VBAK INTO TABLE ITAB_VBAK WHERE
VBELN = '0000000483'.
                                         AUART = 'ZCKD' OR
                                         AUART = 'ZEXS' OR
                                         AUART = 'ZCLM' OR
                                         AUART = 'ZISO' OR
                                         VKORG = '3010' AND
                                         VTWEG = '30' AND
                                         SPART = '30' AND
                                         ERDAT = SY-DATUM.
    IF NOT ITAB_VBAK[] IS INITIAL.
      SELECT VBELN VBTYP FROM VBUK INTO TABLE ITAB_VBUK FOR ALL ENTRIES IN ITAB_VBAK
                                                        WHERE
                                                        VBELN = ITAB_VBAK-VBELN AND
                                                        LFSTK = 'C' AND    " DELIVERY STATUS : COMPLETED
                                                        LFGSK = 'C' AND    " OVER ALLDELIVERY STATUS : COMPLETED
                                                        FKSAK NE 'C' AND   " BILLING STATUS ORDER : NOT COMPLETED
                                                        VBTYP = 'C'.       " DOC TYPE = ORDERS
    ENDIF.
ENDFORM.                    " GET_OPENORDERS
*&      Form CREATE_INVOICE
      text
--> p1        text
<-- p2        text
FORM CREATE_INVOICE .
LOOP AT ITAB_VBUK.
DO.
   READ DATASET DATASET INTO RECORD.
   IF SY-SUBRC <> 0. EXIT. ENDIF.
    PERFORM BDC_DYNPRO      USING 'SAPMV60A' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                 '0000000464'.
                                   ITAB_VBUK-VBELN.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KOMFK-VBELN(01)'
                                  ITAB_VBUK-VBELN.
                                 RECORD-VBELN_01_001.
    PERFORM BDC_DYNPRO      USING 'SAPMV60A' '0104'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'ZESO'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=SICH'.
   PERFORM BDC_TRANSACTION USING 'VF01'.
ENDDO.
WAIT UP TO 1 SECONDS.
    CALL TRANSACTION 'VF01' USING BDCDATA MODE 'N'
                                   UPDATE 'S'
                                   MESSAGES INTO MESSTAB.
    COMMIT WORK AND WAIT.
    CLEAR: BDCDATA, MESSTAB.
    REFRESH: BDCDATA, MESSTAB.
ENDLOOP.
PERFORM CLOSE_GROUP.
PERFORM CLOSE_DATASET USING DATASET.
loop at MESSTAB.
write : Messtab.
endloop.
ENDFORM.                    " CREATE_INVOICE
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD

Hi All,
Thanks for the replies.
Just adding my comments here.
We need to do the saperate recording for this problem.
In SHDB, we have to select "Simulate Background Mode"
My problem is solved.
Adding here so that it will appear in teh search results for others....
May be.. cheers,

BDC VA01 in background mode error

Hi ,
I am psoting data into VA01 using BDC call transaction in background mode for two cases.
For one it is running successfully and for the other it is not.
I have compared the data in the table BDCDATA for both the cases and it is same.
Then I tried debugging in foreground mode and the same case which was not running earlier is running in foreground mode.
Please advice what could be the problem?

>
ABHI wrote:
> I am getting the following messages:
>
>
>
> TCODE     DYNAME     DYNUMB     MSGTYP     MSGID     MSGNR     MSGV1     MSGV2     MSGV3     ENV
> VA01     SAPMV45A     4001     W     VU     1          Purchase order date          CTU
> VA01     SAPMV45A     4001     W     V1     221     5/27/2010               CTU
> VA01     SAPMV45A     103     I     V1     81                    CD
> VA01     SAPMSSY3     131     S     0     344     SAPMSSY3     131          CTU
Hello ABHI,
The problem is because of some breakpoints created by you. So it is entering it to debugger in the background mode which cannot be handled by the BDC. Delete all your breakpoints before testing or open a new logon session to test it in background.
Hope this solves your problem.
Regards,
Karthik D

Problems creating background job for program (job open, submit and close)

Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
       EXPORTING
            stdt_dialog                    = 'Y'
            stdt_input                     = stdt_input
            stdt_opcode                    = 14
       IMPORTING
            stdt_modify_type               = stdt_modify_type
            stdt_output                    = stdt_output
       EXCEPTIONS
            fcal_id_not_defined            = 1
            incomplete_last_startdate      = 2
            incomplete_startdate           = 3
            invalid_dialog_type            = 4
            invalid_eventid                = 5
            invalid_opcode                 = 6
            invalid_opmode_name            = 7
            invalid_periodbehaviour        = 8
            invalid_predecessor_jobname    = 9
            last_startdate_in_the_past     = 10
            no_period_data_given           = 11
            no_startdate_given             = 12
            period_and_predjob_no_way      = 13
            period_too_small_for_limit     = 14
            predecessor_jobname_not_unique = 15
            startdate_interval_too_large   = 16
            startdate_in_the_past          = 17
            startdate_is_a_holiday         = 18
            startdate_out_of_fcal_range    = 19
            stdt_before_holiday_in_past    = 20
            unknown_fcal_error_occured     = 21
            no_workday_nr_given            = 22
            invalid_workday_countdir       = 23
            invalid_workday_nr             = 24
            notbefore_stdt_missing         = 25
            workday_starttime_missing      = 26
            no_eventid_given               = 27
            OTHERS                         = 28.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
               INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = jobname
       IMPORTING
            jobcount         = jobcount
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
         VIA JOB jobname NUMBER jobcount
         WITH ano EQ ano
         WITH so_perio IN so_perio
         WITH so_date IN so_date
         WITH so_org EQ so_org
         WITH so_num IN so_num
         AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
    CLEAR job_imediate.
    job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            calendar_id                 = stdt_output-calendarid
            event_id                    = stdt_output-eventid
            event_param                 = stdt_output-eventparm
            event_periodic              = stdt_output-periodic "?
            jobcount                    = jobcount
            jobname                     = jobname
            laststrtdt                  = stdt_output-laststrtdt
            laststrttm                  = stdt_output-laststrttm
            prddays                     = stdt_output-prddays "??
            prdhours                    = stdt_output-prdhours "?
            prdmins                     = stdt_output-prdmins "??
            prdmonths                   = stdt_output-prdmonths
            prdweeks                    = stdt_output-prdweeks "?
            predjob_checkstat           = stdt_output-checkstat
            pred_jobcount               = stdt_output-predjobcnt
            pred_jobname                = stdt_output-predjob
            sdlstrtdt                   = stdt_output-sdlstrtdt
            sdlstrttm                   = stdt_output-sdlstrttm
            strtimmed                   = job_imediate
            targetsystem                = stdt_output-instname
            start_on_workday_not_before = stdt_output-notbefore
            start_on_workday_nr         = stdt_output-wdayno
            workday_count_direction     = stdt_output-wdaycdir
       IMPORTING
            job_was_released            = job_release
       EXCEPTIONS
            cant_start_immediate        = 1
            invalid_startdate           = 2
            jobname_missing             = 3
            job_close_failed            = 4
            job_nosteps                 = 5
            job_notex                   = 6
            lock_failed                 = 7
            OTHERS                      = 8.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ELSE.
    MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João Martins

Hello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
      EXPORTING
           jobname          = w_jobname
      IMPORTING
           jobcount         = w_jobcount
      EXCEPTIONS
           cant_create_job = 1
           invalid_job_data = 2
           jobname_missing = 3
           OTHERS           = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
   VIA JOB w_jobname NUMBER w_jobcount
   AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
   EXPORTING
      jobcount           = w_jobcount
      jobname           = w_jobname
      sdlstrtdt            = sy-datum
      sdlstrttm           = l_hora
      targetserver       = w_servidor
   IMPORTING
      job_was_released     = l_liberado
   EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      OTHERS               = 8.
Regards.
Valter Oliveira.

Problem with Background image and JFrame

Hi there!
I've the following problem:
I created a JFrame with an integrated JPanel. In this JFrame I display a background image. Therefore I've used my own contentPane:
public class MContentPane extends JComponent{
private Image backgroundImage = null;
public MContentPane() {
super();
* Returns the background image
* @return Background image
public Image getBackgroundImage() {
return backgroundImage;
* Sets the background image
* @param backgroundImage Background image
public void setBackgroundImage(Image backgroundImage) {
this.backgroundImage = backgroundImage;
* Overrides the painting to display a background image
protected void paintComponent(Graphics g) {
if (isOpaque()) {
g.setColor(getBackground());
g.fillRect(0, 0, getWidth(), getHeight());
if (backgroundImage != null) {
g.drawImage(backgroundImage,0,0,this);
super.paintComponent(g);
Now the background image displays correct. But as soon as I click on some combobox that is placed within the integrated JPanel I see fractals of the opened combobox on the background. When I minimize
the Frame they disappear. Sometimes though I get also some fractals when resizing the JFrame.
It seems there is some problem with the redrawing of the background e.g. it doesn't get redrawn as often as it should be!?
Could anyone give me some hint, on how to achieve a clear background after clicking some combobox?
Thx in advance

I still prefer using a border to draw a background image:
import java.awt.*;
import java.awt.image.*;
import javax.swing.border.*;
public class CentredBackgroundBorder implements Border {
    private final BufferedImage image;
    public CentredBackgroundBorder(BufferedImage image) {
        this.image = image;
    public void paintBorder(Component c, Graphics g, int x, int y, int width, int height) {
        int x0 = x + (width-image.getWidth())/2;
        int y0 = y + (height-image.getHeight())/2;
        g. drawImage(image, x0, y0, null);
    public Insets getBorderInsets(Component c) {
        return new Insets(0,0,0,0);
    public boolean isBorderOpaque() {
        return true;
}And here is a demo where I load the background image asynchronously, so that I can launch the GUI before the image is done loading. Warning: you may find the image disturbing...
import java.awt.*;
import java.io.*;
import java.net.URL;
import javax.imageio.*;
import javax.swing.*;
import javax.swing.border.*;
public class BackgroundBorderExample {
    public static void main(String[] args) throws IOException {
        JFrame.setDefaultLookAndFeelDecorated(true);
        JFrame f = new JFrame("BackgroundBorderExample");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JTextArea area = new JTextArea(24,80);
        area.setForeground(Color.WHITE);
        area.setOpaque(false);
        area.read(new FileReader(new File("BackgroundBorderExample.java")), null);
        final JScrollPane sp = new JScrollPane(area);
        sp.setBackground(Color.BLACK);
        sp.getViewport().setOpaque(false);
        f.getContentPane().add(sp);
        f.setSize(600,400);
        f.setLocationRelativeTo(null);
        f.setVisible(true);
        String url = "http://today.java.net/jag/bio/JagHeadshot.jpg";
        final Border bkgrnd = new CentredBackgroundBorder(ImageIO.read(new URL(url)));
        Runnable r = new Runnable() {
            public void run() {
                sp.setViewportBorder(bkgrnd);
                sp.repaint();
        SwingUtilities.invokeLater(r);
}

Problems with background job

Hi,
I have problems when creating a job that is supposed to be run once in background. I use the common steps as described below. My problem is that the report is executed twice.
- First it is executed synchronously when the job is created
- Then it is executed in the normal job step as I want it to do
I don't want it to be executed the first time because it creates data!!!
Code:
CALL FUNCTION 'JOB_OPEN'
     EXPORTING
          jobname = w_jobid
     IMPORTING
          jobcount = w_jobnr
          sdlstrtdt = sy-datum
          sdlstrttm = sy-uzeit.
SUBMIT (p_prog)
WITH p_idocnr = p_idocno
           USER            p_user
           VIA   JOB       w_jobid
                 NUMBER w_jobnr
                 AND       RETURN.
CALL FUNCTION 'JOB_CLOSE'
     EXPORTING
          jobcount         = w_jobnr
          jobname          = w_jobid
          strtimmed        = 'X'
     IMPORTING
          job_was_released = w_jobrel.
Does anyone have a clue of what I should do to prevent this?
// Regards Hans

Hi again,
1. U are right.
2. It will happen if we use SUBMIT.
3. As per the help documentation,
    it will run the program in separate session,
   ( as soon as submit statement comes)
4. and run the INITIALIZATION event.
The VIA JOB addition also loads the program accessed in a separate internal mode when the SUBMIT statement is executed and the system performs all the steps specified before START-OF-SELECTION. This means the events LOAD-OF-PROGRAM and INITIALIZATION are triggered and selection screen processing is performed. If the selection screen is not processed in the background when VIA SELECTION-SCREEN is specified, the user of the calling program can eidit it and schedule the program accessed in the background request using the function Place in Job. If the user cancels selection screen processing, the program is not scheduled in the background job. In both cases, execution of the program executed is completed after selection screen processing and the system returns to the calling program due to the AND RETURN statement.
regards,
amit m.

BDC problem in background?

Similar Messages

Maybe you are looking for