BDT Event DSAVE and Error Processing
Hi there.
I would appreciate it if someone can help me please.
I have a requirement to update the contract account on the save of Business Partner changes. To do the BP Change I am using BAPI_ISUPARTNER_CHANGE.
On the save the event DSAVE is entered and in there, we have a custom FM to update certain fields of the Contract Account.
The core to my issue is that I wish to report any failure in the CA update back to the BAPI (BP Change)that has initiated the process in the event.
I have been attempting this by FM: 'BUS_MESSAGE_STORE' in the event and then by calling FM:BUS_MESSAGE_GET in the BAPI BAPI_ISUPARTNER_CHANGE when processing returns from the event. This does not work unfortunately. I get the message: "Message handler not activated" from the BUS_MESSAGE_GET.
I am sure I am missing a few steps here.
Again, I would appreciate it if anyone can help me resolve this issue.
Thanks in advance.
Mick.
Edited by: Mick Ahern on Jul 29, 2008 12:15 PM
Hi Ankit,
Try to do the enhancement in the BDT event DSAVC and would recommend you to use the FM VKK_FICA_GLOBAL_MEMORY_GET for finding the lock information.
Thanks,
Amlan
Similar Messages
-
Concept Question about EDI and Error Processing
Hello All,
This is a concept question, I was wondering how others would approach this scenario.
Let's take this scenario. In EDI often the transmission for a purchase order comes in with an invalid material number. Normal error processing is for the EDI team to research the issue (find the correct matnr), edit the idoc and reprocess the Idoc. I would like to move that type of error processing out of the hands of the EDI folks and into the hands of the business users.
How would they correct the material number? It has to be more intuitive than editing an IDoc, it has to be an easy and intuitive user interface. This process has to also work for many types of EDI transmissions both inbound and outbound.
There would be many ways to handle this: create a report with an editable grid that would change the idoc during input and create the order with the corrections, convert the idoc to xml and use simple transformations, use an xsl report...etc. You get the point.
How would you approach this? Before I start the design I want to make sure I've given all the options due consideration...all options, webdynpro, transformations, regex, you name it...all is available, except there is no XI.
Personally I'm leaning towards an editable grid and processing buttons that would post the idoc in background...but I do that type of thing all the time and I may be in a rut and neglecting better design options.
Thanks for your input,
Greg<b>Paul:</b> So it runs the transaction silently in BDC format, until the error occurs, then opens up in dialogue to allow the user to change the invalid material, and then continue on with processing.
This works when the processing function module uses BDC. But even then I think this is possibly nice from user perspective, but a nightmare from auditing perspective. I.e. correct me if I'm wrong, but I'm pretty sure there's no log indicating that the user changed the material number. Thus for anybody comparing the IDoc contents against the posted document (including change history) there's no trail that shows this change. Of course you can assume that this is what must have happened, but I personally prefer if I can track in the system what happened and have proof for that.
<b>Reddy:</b>
<ol>
<li>it can be run daily basis, which should select all idocs which are in status 51 with message number (..related to wrong material number). report output should inlcude :idoc number-wrong mat no- space for new material to be entered by business against wrong 1. And there should be one button for RUN.</li>
<li>After RUN, the material number should be changed to new 1 in segments and idocs should be reprocessed.</li>
<li>repeat the run until business enter right mat num.</li>
</ol>
Design seems to limited to me (takes care only of one error message). Might work if that's the main pain point and this is the only one the user is dealing with. Otherwise I'd expect pretty soon they start complaining about having to use different tools for the possible errors. I'd keep the report more general, but allow this special form of processing only for a given error message (otherwise it's a normal re-process as triggered for example via BD87).
Also, I assume that when you talk of changing the IDoc you mean that you actually keep an original copy around (like SAP does when you edit an IDoc). Often this is required from an auditing perspective. I'm not sure why you wouldn't want to check the material number <em>before</em> trying to process the IDoc to avoid wasting system resources (but maybe I misunderstood the step).
Anyhow, in theory you could also achieve all of this via workflow. You can add custom columns to the work item overview in the inbox, only issue here is that it doesn't scale well (so issues with larger volumes). -
I've been getting this error for two weeks. I've tried rebooting the computer, resetting my network connection, and double-checking my password. The chat function works fine on my iPad and iPhone, just not on my computer. I have OS X 10.8.4 running on a MacBook Pro.
Any help GREATLY appreciated.
SuzanneI have encountered the same problem as Wildwing today on my iMac. Facetime was working fine last week, but at lunch time today when my son tried to call he could not get through, although I was sitting at my iMac compiling an email at the time. Fortunately however I have an iPad Mini, which I heard ringing in another room so I picked up the call on that.
I have noticed that if I go to the FaceTime tool bar, Preferences is greyed out.
I have tried to sign in again but keep getting this message : 'The server encountered an error processing registration. Please try again later.'
I have checked the outage on Support System Status, Apple is not reporting any problems. I have logged on to Apple ID and re-verified both of my Apple IDs (I use a different one for iTunes) and had no difficulty accessing my Apple ID on either account on my current passwords.
Messages which is set up with the same Apple ID as Facetime is working fine on my iMac and both Facetime and Messaes are fine on my Mini.
I have had two Apple IDs for ages, which has never caused a problem before although I am wondering if this is the issue.
Taking the 'try again later' literally, I have been trying that on and off since lunch time and I have rebooted my computer, I am still getting the same Error message.
I am at a loss to know what to do next. Help please -
2012R2-Ess. event 12072 and error 401 (not authorized) when doing checkhealth
Hello,
I installed wsus on a fresh installed Windows Server 2012R2 Essentials (german) and "wsusutil checkhealth" gives me Event 12072 and 13002
The WSUS Content Directory is not accessible (Es kann nicht auf das WSUS-Inhaltsverzeichnis zugegriffen werden.)
System.Net.WebException: Der Remoteserver hat einen Fehler zurückgegeben: (401) Nicht autorisiert.
(remoteserver gave error back: 401, not authorized)
bei System.Net.HttpWebRequest.GetResponse()
bei Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.CheckContentDirWebAccess(EventLoggingType type, HealthEventLogger logger)
What I did:
installed server 2012R2 Essentials
did a domain migration from a 1-Server 2003 Domain to this 1-Server 2012 Domain the old 2003 server hosted a wsus server
installed wsus as a role, content directory: D:\wsus (not created before, was created automatically by wsus setup/config)
ran the wsus config, products: Server 2012 only
grant "Network service" Full Access in D:\ and D:\WSUS
grant "Network service" Full Access in %windir%\.Net\Framework\v4..\Temporary ASP .Net Files
tried to grant "Network service" Full Access in IIS-Manager > WSUS-Management > APIRemoting30 but got some "access denied" errors here, although i am administrator
"D:\WSUS\WsusContent\anonymousCheckFile.txt" exists, is empty
icacls D:\wsus\wsuscontent
NT-AUTORITÄT\Netzwerkdienst:(OI)(CI)(F)
ROESRATH\WSUS Administrators:(OI)(CI)(F)
NT-AUTORITÄT\Netzwerkdienst:(I)(OI)(CI)(F)
VORDEFINIERT\Administratoren:(I)(OI)(CI)(F)
NT-AUTORITÄT\SYSTEM:(I)(OI)(CI)(F)
http://localhost/connect/Server.aspx still works
Unfortunately I did not find anything about this 401 not authorized in the web :-((
Hope, anyone could help me
Regards
Uweicacls D:\wsus\wsuscontent
NT-AUTORITÄT\Netzwerkdienst:(OI)(CI)(F)
ROESRATH\WSUS Administrators:(OI)(CI)(F)
NT-AUTORITÄT\Netzwerkdienst:(I)(OI)(CI)(F)
VORDEFINIERT\Administratoren:(I)(OI)(CI)(F)
NT-AUTORITÄT\SYSTEM:(I)(OI)(CI)(F)
The USERS group appears to be missing from this list. Since it is the USERS group that grants permissions to IIS_USR for anonymous access, and the /Content v-dir is an anonymous resource, almost certainly the absence of the USERS group is causing the '401'
errors. The USERS group requires Read & Execute access on the folder tree.
Also, there may be complications because this machine is a Domain Controller. Domain Controllers and WSUS on Windows Server 2012 do not play nicely together, but it would seem you're already past most of those known hurdles. However, I do find these two
references to be ambiguous:
ROESRATH\WSUS Administrators:(OI)(CI)(F)
VORDEFINIERT\Administratoren:(I)(OI)(CI)(F)
The Administrators group should have Full Control, as should the WSUS Administrators group. If this machine is a Domain Controller, then those would actually be the DOMAIN\Domain Admins group and the DOMAIN\WSUS Administrators group. But in this instance,
these two groups have different scope references: ROESRATH vs VORDEFINIERT.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Event ID 1058 Error Code 1326 Logon Failure; unknown user name or bad password
I am attempting to apply a group policy to a group of computers and I will get this event ID and error code generated. I can unc to the gpt.ini file. What can I do to resolve this problem? My structure is like this: I have a 2003
R2 DC located at site A (and this computer WIN7 is also located at site A) and I also have other 2003 DC's located at remote offices (across WAN links). This computer seems to be wanting to apply the GPO from one of the remote office DC's as opposed
to the local DC that is much closer - how can I change how GPO is processed on this computer?I have two Domain Controllers Main ( Main DC Win 2012) and Second DC Win 2008.
the date of some policies is not out of date....
please check these files to know the problem.
dcdiag.txt output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine ASMDC, is a Directory Server.
Home Server = ASMDC
* Connecting to directory service on server ASMDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 2 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... ASMDC passed test Connectivity
Testing server: Default-First-Site-Name\BSMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... BSMDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Advertising
The DC ASMDC is advertising itself as a DC and having a DS.
The DC ASMDC is advertising as an LDAP server
The DC ASMDC is advertising as having a writeable directory
The DC ASMDC is advertising as a Key Distribution Center
The DC ASMDC is advertising as a time server
The DS ASMDC is advertising as a GC.
......................... ASMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... ASMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... ASMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... ASMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... ASMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... ASMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC ASMDC on DC ASMDC.
* SPN found :LDAP/ASMDC.buc.edu/buc.edu
* SPN found :LDAP/ASMDC.buc.edu
* SPN found :LDAP/ASMDC
* SPN found :LDAP/ASMDC.buc.edu/BUC
* SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
* SPN found :HOST/ASMDC.buc.edu/buc.edu
* SPN found :HOST/ASMDC.buc.edu
* SPN found :HOST/ASMDC
* SPN found :HOST/ASMDC.buc.edu/BUC
* SPN found :GC/ASMDC.buc.edu/buc.edu
......................... ASMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC ASMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... ASMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\ASMDC\netlogon
Verified share \\ASMDC\sysvol
......................... ASMDC passed test NetLogons
Starting test: ObjectsReplicated
ASMDC is in domain DC=buc,DC=edu
Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... ASMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... ASMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 7604 to 8103
* rIDPreviousAllocationPool is 7604 to 8103
* rIDNextRID: 7640
......................... ASMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... ASMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Warning Event occurred. EventID: 0x825A0024
Time Generated: 08/21/2014 00:22:16
Event String:
The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
An Warning Event occurred. EventID: 0x8000000E
Time Generated: 08/21/2014 00:32:29
Event String:
There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
An Error Event occurred. EventID: 0x00000422
Time Generated: 08/21/2014 00:32:29
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... ASMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... ASMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Testing server: Default-First-Site-Name\BSMDC
Starting test: Advertising
The DC BSMDC is advertising itself as a DC and having a DS.
The DC BSMDC is advertising as an LDAP server
The DC BSMDC is advertising as having a writeable directory
The DC BSMDC is advertising as a Key Distribution Center
The DC BSMDC is advertising as a time server
The DS BSMDC is advertising as a GC.
......................... BSMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... BSMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... BSMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BSMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... BSMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... BSMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC BSMDC on DC BSMDC.
* SPN found :LDAP/BSMDC.buc.edu/buc.edu
* SPN found :LDAP/BSMDC.buc.edu
* SPN found :LDAP/BSMDC
* SPN found :LDAP/BSMDC.buc.edu/BUC
* SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
* SPN found :HOST/BSMDC.buc.edu/buc.edu
* SPN found :HOST/BSMDC.buc.edu
* SPN found :HOST/BSMDC
* SPN found :HOST/BSMDC.buc.edu/BUC
* SPN found :GC/BSMDC.buc.edu/buc.edu
......................... BSMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BSMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... BSMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BSMDC\netlogon
Verified share \\BSMDC\sysvol
......................... BSMDC passed test NetLogons
Starting test: ObjectsReplicated
BSMDC is in domain DC=buc,DC=edu
Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... BSMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... BSMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 8104 to 8603
* rIDPreviousAllocationPool is 8104 to 8603
* rIDNextRID: 8106
......................... BSMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BSMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:15
Event String:
Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:19
Event String:
Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:20
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Warning Event occurred. EventID: 0x80000008
Time Generated: 08/20/2014 23:52:20
Event String:
The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000004
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000003
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
the Advanced tab, and then clear the Log spooler information events check box.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:22
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
......................... BSMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... BSMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : buc
Starting test: CheckSDRefDom
......................... buc passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... buc passed test CrossRefValidation
Running enterprise tests on : buc.edu
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
PDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
KDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
......................... buc.edu passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... buc.edu passed test Intersite
====================================================================
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ASMDC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
==== INBOUND NEIGHBORS ======================================
DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:43:56 was successful.
CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:41:11 was successful.
CN=Schema,CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
DC=DomainDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:45:39 was successful.
DC=ForestDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
Regards and thanks in advance
Mhiar -
Facetimer: server encountered an error processing registration
Hello,
This morning, I had no problem signing on to my FaceTime on my Macbook Pro. Later, I updated my IPhone 4's software to the latest version, and now my Macbook Facetime isn't working. When I try to login, I get "Server encountered and error processing registration. Try again later." I've tried changing my password, and I'm still getting the message. What am I missing?
Thanks!Hi,
I had the same problem, I guess Facetime must have access to your current location and time, just make sure you check "Set time zone automatically using current location" box at System Preferences >Date &Time >Time Zone
Cheers, -
Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
RagavHi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak -
Page cannot be displayed' error when 2 events (FireAction and GO) fired
We have created a framework page where FireAction event will be executed
when the value of a calendar item is modified. When we modify the
value and leave the cursor in the field (without tabbing out), and click
GO button, 'Page cannot be displayed' error message will be displayed.
When FireAction event is started, we use CO to retrieve the event. And
when the cursor remains in item1 after being modified and click GO,
2 events will be started (the FireAction event and the GO button's event)
and 'Page cannot be displayed' error will be shown since CO is retrieving
2 events at the same time.
Since by changing certain fields of framework page without tabbing out
is a regualar operation, how can we go around this error when we are
using FireAction event?
sample34_00co.java
package oracle.apps.xx03.ap.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.OADialogPage;
import java.util.Calendar;
* Controller for ...
public class Sample34_00CO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public StringBuffer message = new StringBuffer();
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
// When the browser back button is not executed
if (!pageContext.isBackNavigationFired(false))
System.out.println("NOT FROM BACK BUTTON!! ["+cal.getTime()+"]");
// When the browser back button is executed
else
System.out.println("FROM BACK BUTTON!! ["+cal.getTime()+"]");
//Action being performed when the browser back button is executed
OADialogPage dialogPage = new OADialogPage(STATE_LOSS_ERROR);
pageContext.redirectToDialogPage(dialogPage);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
if ( "updateItem1".equals(pageContext.getParameter(EVENT_PARAM)) )
//When FireAction is executed
System.out.println("item1 FireAction is executed! ["+cal.getTime()+"]");
else
//When other actions beside FireAction is executed
System.out.println("item1 FireAction is not executed! ["+cal.getTime() +"]");
sample34_00pg.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<!-- dbdrv: exec java oracle/jrad/tools/xml/importer XMLImporter.class java &phase=dat+24 checkfile:~PROD:~PATH:~FILE &fullpath:~PROD:~PATH:~FILE -username &un_apps -password &pw_apps -dbconnection &jdbc_db_addr -userId "1" -rootPackage /oracle/apps/~PROD -rootdir &fullpath:~PROD:mds:directory -->
<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.11_1183" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="PageLayoutRN" windowTitle="Sample34_00 WindowTitle" amDefName="oracle.apps.fnd.framework.server.OAApplicationModule" title="Sample34_00 PageHeader">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="MainRN" controllerClass="oracle.apps.xx03.ap.webui.Sample34_00CO">
<ui:contents>
<oa:messageTextInput id="item1" prompt="item1" dataType="DATE">
<ui:primaryClientAction>
<ui:fireAction event="updateItem1"/>
</ui:primaryClientAction>
</oa:messageTextInput>
<oa:messageLayout id="ButtonLayout">
<ui:contents>
<oa:submitButton id="Go" use="/oracle/apps/fnd/attributesets/Buttons/Go"/>
</ui:contents>
</oa:messageLayout>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
----------Shive...good one..!!
One thing that you can do if you don't wanna have PPR, is to validate date column in fire action event in CO in process form request, and raise an error if you don't find appropriate format or null , as per your requirement.
--Mukul -
How to catch date errors and continue processing in a PL/SQL procedure
I'm updating a date field with dates constructed from day, month and year fields. The incoming data has many instances of day and month that are not valid dates, ex 11 31 2007. There is no 31st day in November.
I would like to write a pl/sql script to scan the table containing these values and log the rows that produce conversion errors.
I thought I could do this with exceptions but there are no exceptions that correspond to the ORA-01847 error for mismatched day and month.
Here is what I tried (the print procedure is a local wrapper for DBMS_OUTPUT.put_line):
PROCEDURE date_check IS
start1 DATE ;
BEGIN
select to_date(nvl(yearcollected,'9999') ||'/'|| nvl(monthcollected,'01') ||'/'|| nvl(daycollected,'01'),'YYYY/MM/DD'))) into start1 from incoming_data where id=1 ;
BEGIN
update temp_test set test_date = start1 where id=1 ;
EXCEPTION
WHEN OTHERS THEN
print('Date error message from exception block');
END;
print('Processing continues after handling date exception') ;
END date_check ;
Is there a way to catch this kind of error and continue processing after logging a message?
-=beekyHi, Beeky,
There are lots of different error messages associated with bad dates. Rather than try to catch them all, I use a BEGIN ... EXCEPTION block that contains nothing but a TO_DATE call. This is one of the rare occassions when I think "EXCEPTION WHEN OTHERS" is okay,
The following function comes from a package. If you want to make a stand-alone function, remember to say " *CREATE OR REPLACE* FUNCTION ...".
-- ** t o _ d t **
-- to_dt attempts to convert in_txt (assumed to
-- be in the format of in_fmt_txt) to a DATE.
-- If the conversion works, to_dt returns the DATE.
-- If the conversion fails for any reason, to_dt returns in_err_dt.
FUNCTION to_dt
( in_txt IN VARCHAR2 -- to be converted
, in_fmt_txt IN VARCHAR2 DEFAULT 'DD-MON-YYYY' -- optional format
, in_err_dt IN DATE DEFAULT NULL
RETURN DATE
DETERMINISTIC
AS
BEGIN
-- Try to convert in_txt to a DATE. If it works, fine.
RETURN TO_DATE (in_txt, in_fmt_txt);
EXCEPTION -- If TO_DATE caused an error, then this is not a valid DATE: return in_err_dt
WHEN OTHERS
THEN
RETURN in_err_dt;
END to_dt
; -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
I have a MacBook Pro and have problems using my Facetime. Last time I used it without problems. Now I am trying to use it, and it is asking that I enter my Apple ID. When doing so, it comes up with a message that says, "The server encountered an error processing registrion. Try again later." What does this mean, and how do I fix it? Thanks.
I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S EDear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E -
I'm having trouble logging into facetime. We do not have a new account. I've changed the password and still cannot get in. The message that pops up is "the server encountered an error processing registration. Please try again later." I want to talk to my granddaughter but can't. Can someone help me. Thanks
I had to same problem. I found forums about adding the DNS 8.8.8.8 and 8.8.4.4 in System Preferences - Networks I did that and it still didnt work. Just found another forum saying to go into System Preferences - Time and Date and check the Set time and Date automatically. And it worked for me. Hope it works for you too.
-
I attempted to upgrade the software on my iPad 2 and I got a message that said "unable to restore Ipad due to error". Now the iPad had a black screen with the Apple symbol and the processing symbol going around and around. When I tried to re connect it to iTunes is says "cannot connect to this iPhone due to error". How do I reset the ipad?
Please Get the iPad User Manual for iOS 5.
-
Windows 7 Ultimate 64 bit: Events and Errors
Clicking on “Event Log Online Help” (every event in “Event Viewer”) results in:
Page:
http://www.microsoft.com/technet/support/ee/SearchResults.aspx?Type=1&Fallback=1&Source=Application%20Hang&ID=1002&Product=Windows%20Operating%20System&Version=6.1.7600.16385&Language=6153
“Events and Errors Message Center”:
“Results for: Microsoft Product: Windows Operating System; Version: 6.1.7600.16385; Event ID: X; Event Source: Y”
“No results were found for your query. Please see Search Help for suggestions.”
FulcoHi,
By default, Event Log Online Help redirects to
Events and Errors Message Center. It seems that the path of
MicrosoftRedirectionURL is incorrect. Please look into the following registry and modify the URL path:
1)
Click Start and type:
regedit in the Search box.
2)
Open Registry Editor and find the entry:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\EventViewer
3)
Double click the
MicrosoftRedirectionURL and change the path using:
http://go.microsoft.com/fwlink/events.asp
The above link navigates to
Events and Errors Message Center. If the issue persists, you can use the following URL instead:
http://www.microsoft.com/technet/support/ee/ee_basic.aspx
Now you should open Event Log Online Help correctly.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Maybe you are looking for
-
Problems with OWA after installing Exchange 2010 SP3
Hi, I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message: I did a reset for the OWA vritual directory
-
HI Experts, I am doing File To Mail Scenario, in that i am able to send file (xml file) to mail but in the mail i am gettin that content as a attachment, how can i get this content as a body of the mail, and one more question i have a text file (cont
-
How can I edit batch edited photos from Photomatix in Lightroom?
I have been shooting some last week with my new Canon 70D in RAW and Jpeg and both come through just fine. I batch edited a series of photos in Photomtaix and imported into Lightroom and they all show up with a purple haze. They show up this way in
-
WebUtil Using Client_Text_IO with Japanese chars
Hi, I am trying to use Client_Text_IO to read text file with Japanese characters in it. But it seems like Client_Text_IO can't read Japanese chars properly. Can anyone tell me how to use Client_Text_IO with double byte chars like Japanese? Thanks in
-
hello pleze i tried to send mails from a servlrt in my application i tried it from a sample in tomcat sendmail.jsp which is connect with a servlet that manuplates the name and content for tha mail the problem is i can't do it from my application whic