Benefits ABAP classes used?

Anyone know off hand which classes are called by the Benefits Enrollment webdynpro for ECC 6? I am looking specifically for how it decides which plans are available for which adjustment reasons. Thanks in advance.

Nevermind....ran a trace....
? Server HRXSS_SER_INITSERVICE 4,601 320
IWDECD01_D01_00 Server SFW_GET_SW_STATUS 154 302
IWDECD01_D01_00 Server RHXSS_SER_GET_EMPLOYEE_DATA 2,256 225
IWDECD01_D01_00 Server HR_BEN_ESS_RFC_ENRO_REASONS 1,087 275
IWDECD01_D01_00 Server HR_BEN_ESS_RFC_INIT_SELECTION 178 365
IWDECD01_D01_00 Server HR_BEN_ESS_RFC_SELECTION_DISPL 336 225

Similar Messages

ABAP Class not displaying in operation mapping.

HI,
I have created abap class using se24 for throwing exception message in sxmb_moni, this abap class needs to be called in operation mapping, even though i have activated this abap class in PI environtment, i couldnt see the abap class option in the operation mapping.
Could any one please let me know any change profiles requirements are required,
Thanks,
--Sai

Hi Sai,
Yes, you do have to register ABAP Class Mapping in the Exchange Profile to see this option in the Operation Mapping. Follow these step-by-step configuration guidelines:
http://www.riyaz.net/sap/xipi-how-to-register-abap-mapping-in-exchange-profile/624/
Hope this helps,
Greg

Error handling in Abap Class for SAP Workflow

Hi Experts,
I would like to know if we have an option in abap classes used in workflows to send errors to the workflow log. We can achieve this in BOR Object methods by using the EXIT_RETURN <CODE> var 1 var 2 to send the errors back to the workflow, but how is this achieved through methods from classes used in workflows.
Appreciate your quick responses,
Chaitanya

Just raise exceptions in the normal OO way. Any exception that is a subclass of CX_BO_ERROR should be automatically available in workflow. Use subclasses of CX_BO_TEMPORARY for temporary errors.

ABAP Classes in Workflow

I am planning to use ABAP classes instead of BOR Objects in Workflow and would appreciate
1) any elaborate documentation on the use of ABAP classes in workflow (SAP help has very limited documentation)
2) comparision of using either approach with advantages of using ABAP classes over the use of BOR Objects and limitations of using ABAP classes,if any.
3) any examples of ABAP classes used in Projects
Thanks for your help.
Saurabh

Hi,
check the wiki, in the design and development part are listed all of Jocelyn darts blogs about OO in workflow:
<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/2.DesignandDevelopment&">https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/2.DesignandDevelopment&</a>
regards, Rob Dielemans

Job Schedule Custom ABAP Class Every 2 weeks

Hi Folks,
I would like to ask if possible to run custom ABAP class using JOB Schedule (SM36). I have created a custom class that needs to be run every two weeks.
Thanks,
Robert

Hi,
what do you mean by "run custom class"? If you mean calling methods of that class then no. But it is easy to write a simple report which will call required methods.
Cheers

Shooping cart creation in SRM 7.0 using web dynpro ABAP classes.

Hi,
We have recently upgraded to SRM 7.0 from SRM 4.0. We are using customized portal application for the creation of the shopping cart.I am planning to create custom FM which will use the standard Web dynpro ABAP classes to create the shopping cart.
Could you please guide with the classes that are need to be implemented and the sequence of the classes used in the shopping cart creation.
I think these are the classes that are used in the standard web dynpro ABAP component.
CL_FPM_EVENT ->                  Creates an instance of this class based on an event ID.
CL_BADI_FLT_DATA_TRANS_AND_DB -> Data Handling: Transport and Database.
CL_EXITHANDLER ->               Class for Ext. Services Within Framework of Exit Technique.
CL_EX_BBP_DOC_CHANGE_BADI ->     BAdI Class CL_EX_BBP_DOC_CHANGE_BADI.
CL_BBP_OBJECTS_ACCESS ->         Access Functions for Object Types.
/SAPSRM/CL_PDO_BO_SC ->          Shopping Cart BO.
Your expert comments will be appreciated...
Regards,
Naresh

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

File to Proxy Scenario using ABAP Class and DB Multi Connect

Hello Friends,
I have a scenario below and a proposed solution. I would like some input as to whether i am headed the right way.
Scenario: Thousands of records come in from the legacy accounting system. The fields of these records need to be mapped to SAP fields using cross-reference tables stored in DB2. Finally, summarize the records by deleting a few fields and feed to R/3.
Solution i proposed:
(1) File Adapter is used to send the file
(2) Although JDBC adapter comes first to mind but since i need to access the DB2 tables multiple times for each record i propose to use an ABAP class for the mapping. Within the ABAP class the intent is to open an database connection to DB2, read the relevant cross tables using native SQL and finally generate the output XML.
(3) Reciever is Proxy which feeds this generated XML to SAP for creating posting via BAPI_ACC_DOCUMENT_POST
Question: Is the above solution correct or is there a better method to implement this scenario?
Please let me know.
Thanks,
Minhaj.

Looks fine. Few observations -
1. Whether it is ABAP class or Mapping in RFC lookup, you are making multiple trips to the database.
2. It looks like PI is being used only for reading the file and converting it to XML.
3. If using PI is not mandatory, then a complete ABAP class on ECC it self would be faster than swtching between PI Java, PI ABAP then round trips to DB2 finally data push to ECC.
If you could look at something like fetching all the required RFC look up data in one go and then map the fields according, might save u on processor and network resources.
VJ

How to use ABAP Class to modify Web Query Result ??

Hi all !
We are using Web Templates to display our Query.
What I would like to do ( and seems a really important issue for our users! ) is to have a "PAGE BREAK" everytime the value of a charateristics change in the report
For Example :
-Page 1-
Division     Project
   A               1
                    2
                    3
-Page 2-
Division     Project
   B               1
                    2
                    3
and so on....
I read threads about using ABAP CLASS but no example what so ever...
We are presently under BW 3.1 but are considering upgrading to 7.0 by the end of the year so if there is a solution to my problem on either version i'd like to know.
If anyone has any information about how I can do this it would be most appreciated
Thx
JB.

Hi Yong,
Ravi is right, first check the blogs by Jocelyn, and if you still have specific questions you can ask them. I have used ABAP classes in workflow and I know Mike Pokraka tries to use classes exclusively.
Regards,
Martin

Create an event using abap class (transaction swetypv)

Hi,
Im trying to create an event by using an abap class.
The purpose is to update po reqs using BAPI_REQUISITION_CHANGE upon saving a sales order. The exit is called on saving a sales order MV45AFZZ.
In MV45AFZZ the method cl_swf_evt_event is called and the object type, event, objkey and obj cat is exported.
Object Type = ZBUS203200
Event = Z_TRAD_ORDER_CHANGE_OO
I created my class ZCL_UPDATE_PUR_REQ (by copying CL_SWF_RUN_WIM_HANDLER
And using interface name BI_EVENT_HANDLER_STATIC )
In /nswetypv I assigned Class ZCL_UPDATE_PUR_REQ
to Object Type ZBUS203200
And Event Z_TRAD_ORDER_CHANGE_OO.
All that works fine except for passing in the objectkey.
In Class ZCL_UPDATE_PUR_REQ
Method BI_EVENT_HANDLER_STATIC~ON_EVENT
When I go to create a parameter for object key, I get the message
Parameters/exceptions of inherited methods or events cannot be changed.
Has anyone any suggestions for how I can get the object key into the method call BI_EVENT_HANDLER_STATIC~ON_EVENT?
Thanks
Ann

Hi Johann,
You don't need a class to do the job if you are on a 6.10 or higher system. Use command CALL TRANSFORMATION to create an XML from an internal table.
Regards,
John.

Calling a custom tcode using abap class from workflow

Hi Experts,
I have a requirement of calling a custom tcode from my workflow.
For this i have created a class zcl_test ( has if_workflow ) .
I created a method ztest which will call the tcode.
CALL TRANSACTION 'ZTX'. ( My tcode just has 1 input field, for testing purpose )
Then i created a task in whichi hv used this abap class and method.
But the tcode does not run when i execute the workflow.
Please help.
Thank You,
Radhika Vadher.

Radhika Vadher
use the sample code to get the data from the task container into the ABAP class
DATA :
         w_ref        TYPE REF TO      if_swf_run_wim_internal,
         w_ref_cnt TYPE REF TO      if_wapi_workitem_context,
          w_wi_ref   TYPE REF TO      if_swf_ifs_parameter_container.
TRY.
    CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
      EXPORTING
        im_wiid     = w_wiid
      RECEIVING
        re_instance = w_ref.
CATCH cx_swf_run_wim_enq_failed .
CATCH cx_swf_run_wim_read_failed .
CATCH cx_swf_run_wim .
ENDTRY.
CALL METHOD w_ref->get_workitem_context
RECEIVING
    re_ctx = w_ref_cnt.
CALL METHOD w_ref_cnt->get_wi_container
RECEIVING
    re_container = w_wi_ref.
and the w_wi_ref is having a method GET use that method to get the values of the task container into the ABAP class.

Function module equivalent to SWE_EVENT_CREATE while using ABAP classes

Hi there,
I used to use SWE_CREATE_EVENT to fire the events linked to my BOR objects, in order to start certain workflows.
Now I am using ABAP classes within the WorkFlows, and the name of the classes MUST (in my case) be longer than 10 characters, and SWE_EVENT_CREATE is cutting the name so it does not work
Do you know any FM equivalent to start an event from a ABAP class (SE24) object?
I have tried to use SAP_WAPI_START_WORKFLOW, but I cannot find the way to include my object in the container. Any ideas on this point would be welcome as well
Thanks so much,
Miguel

Thanks for such a quick reply,
You were right. I actually did follow Jocelyn's blogs, but somehow I skipped the raising event section.
Just for information, the URL with the solution to this problem is:
/people/jocelyn.dart/blog/2006/07/27/raising-abap-oo-events-for-workflow
Have a good one

How to auto refresh planning application -- using ABAP Class?

Hi
I have written few planning functions and attached them in one single planning sequence. One of the planning function in this sequence is de-activate data slice checkmark in planning modeler. If I execute this planning function indiviually then it works great however when I use this function in sequence then second function in row doesnot identify changes made by first function(data slice inactivate) and thus throws errors.
At the same time, if I refresh my planning session and re-execute the planning sequence then it does works as REFRESH activates the changes done by first function (de-activate data slice).
I am wondering if there is any ABAP class that can trigger this auto refresh in background else some other method to do this auto refresh ?
Please let me know if you have any thoughts on this one.
Thanks and happy holidays
Al
Edited by: Al Gon on Dec 21, 2007 3:56 AM

Hi Al,
The planning fn to deactivate was ineffective in a sequence was because the sequence which executes the functions does it on the data in the buffer and not actually on saved data, while your deactivation would work on the data after its saved.
You could perhaps run that function separately from the others in the sequence and save the data first and then perform your "deactivation" function.
Merry Christmas
Aby

ALV using ABAP Classes and Objects

Hi All,
I am trying to print the values in my internal table using ALV, using ABAP classes and objects. Here the title for columns are picked based on the title specified in the data element. I want to set the title of my columns by my own. how to achieve this ?. Please provide me a sample code if possible.
thanks & regards,
Navneeth.K

Hello Navneeth
The following sample report shows how to build and modify a fieldcatalog (routine <b>BUILD_FIELDCATALOG_KNB1</b>).
*& Report ZUS_SDN_ALVGRID_EVENTS
REPORT zus_sdn_alvgrid_events.
DATA:
gd_okcode        TYPE ui_func,
gt_fcat          TYPE lvc_t_fcat,
go_docking       TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1.
PARAMETERS:
p_bukrs      TYPE bukrs DEFAULT '2000' OBLIGATORY.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
        IMPORTING
          e_row_id
          e_column_id
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
*   define local data
    DATA:
      ls_knb1     TYPE knb1,
      ls_col_id   TYPE lvc_s_col.
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CASE e_column_id-fieldname.
      WHEN 'KUNNR'.
        SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
        SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      WHEN 'ERNAM'.
*        SET PARAMETER ID 'USR' FIELD ls_knb1-ernam.
*        NOTE: no parameter id available, yet simply show the priciple
        CALL TRANSACTION 'SU01' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
*       do nothing
    ENDCASE.
*   Set active cell to field BUKRS otherwise the focus is still on
*   field KUNNR which will always raise event HOTSPOT_CLICK
    ls_col_id-fieldname = 'BUKRS'.
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
        is_row_id    = e_row_id
        is_column_id = ls_col_id.
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_hotspot_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    CHANGING
      it_outtab       = gt_knb1
      it_fieldcatalog = gt_fcat
    EXCEPTIONS
      OTHERS          = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form BUILD_FIELDCATALOG_KNB1
*       text
* --> p1        text
* <-- p2        text
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
    ls_fcat        TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
*     I_BUFFER_ACTIVE              =
      i_structure_name             = 'KNB1'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_BYPASSING_BUFFER           =
*     I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = gt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat
          WHERE ( fieldname = 'KUNNR' OR
                  fieldname = 'ERNAM' ).
    ls_fcat-hotspot = abap_true.
    ls_fcat-scrtext_s = '<short text>'. " short text of column
    ls_fcat-scrtext_m = '<medium text>'. " medium text of column
    ls_fcat-scrtext_l   = '<long text>'. " longtext text of column
    ls_fcat-tooltip      = '...'. " ALV control: Tool tip for column header
    ls_fcat-coltext    = '...'.   " ALV control: Column heading
    MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                    " BUILD_FIELDCATALOG_KNB1
Regards
Uwe

Create an event using abap class

Hi,
Im trying to create an event by using an abap class.
The purpose is to update po reqs using BAPI_REQUISITION_CHANGE upon saving a sales order. The exit is called on saving a sales order MV45AFZZ.
In MV45AFZZ the method cl_swf_evt_event is called and the object type, event, objkey and obj cat is exported.
Object Type    = ZBUS203200
Event          = Z_TRAD_ORDER_CHANGE_OO
I created my class ZCL_UPDATE_PUR_REQ (by copying CL_SWF_RUN_WIM_HANDLER
And using interface name BI_EVENT_HANDLER_STATIC   )
In /nswetypv I assigned Class ZCL_UPDATE_PUR_REQ
to     Object Type     ZBUS203200
And   Event              Z_TRAD_ORDER_CHANGE_OO.
All that works fine except for passing in the objectkey.
In Class ZCL_UPDATE_PUR_REQ
Method BI_EVENT_HANDLER_STATIC~ON_EVENT
When I go to create a parameter for object key, I get the message
Parameters/exceptions of inherited methods or events cannot be changed.
Has anyone any suggestions for how I can get the object key into the method call BI_EVENT_HANDLER_STATIC~ON_EVENT?
Thanks
Ann

Hi Johann,
You don't need a class to do the job if you are on a 6.10 or higher system. Use command CALL TRANSFORMATION to create an XML from an internal table.
Regards,
John.

Hide a specific cell using ABAP classes

Hi Experts,
Is there a way to hide a specific cell using ABAP classes for reports?
Marcelo

Hello Thomas Daly
    I never saw a way to grant permission to a List, the only way I ever saw a list get its permissions is thru
the group site it resides in, the Discussion Board is the problem in this case (it has preconfigure permissions but they seem more like properties that you select the value from RadioButtons). However, ms-addnew gets rid of the Add new link but it
gets rid of the one in the Discusson Board too because Discussion Board falls in the category of List.
    In other words ms-addnew in the master got rid of all of the Add new items, link etc as hoped but now
I can't add to the Discussion Board.
    I am alright with a hack (I am open to any suggestions) that would work if it works but, the List's I am referring to are all "Links" in the Quick Launch so I dont know how you would be able to apply the jquery, how would you apply the
jquery to a Links in a Quick Launch?
    Thank you
    Shabeaut

Benefits ABAP classes used?

Similar Messages

Maybe you are looking for