Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Similar Messages

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

Best practice for Admin viewing contents of network homes

How are you viewing the contents of your users' network home directories in the gui?
Is there a better way than logging in locally as root? I'd like to do this over AFP if possible.
Can I make an HomeAdmins group and propogate that group to have read access to all users' home folders? How about for new homes that are subsequently created?
Thanks,
b.

You probably know this already, but:
1. Nothing bad should happen if you change the group owner of your home directories unless you're using the current group ownership for something important.
2. If you set the setgid bit on the root directory of the sharepoint and it is owned by the admin group then new folders created within should have the group owner you want. There are various ways to ensure the home directories would have the proper permissions.

Best practices for ARM - please help!!!

Hi all,
Can you please help with any pointers / links to documents describing best practices for "who should be creating" the GRC request in below workflow of ARM in GRC 10.0??
Create GRC request -> role approver -> risk manager -> security team
options are : end user / Manager / Functional super users / security team.
End user and manager not possible- we can not train so many people. Functional team is refusing since its a lot of work. Please help me with pointers to any best practices documents.
Thanks!!!!

In this case, I recommend proposing that the department managers create GRC Access Requests. In order for the managers to comprehend the new process, you should create a separate "Role Catalog" that describes what abilities each role enables. This Role Catalog needs to be taught to the department Managers, and they need to fully understand what tcodes and abilities are inside of each role. From your workflow design, it looks like Role Owners should be brought into these workshops.
You might consider a Role Catalog that the manager could filter on and make selections from. For example, an AP manager could select "Accounts Payable" roles, and then choose from a smaller list of AP-related roles. You could map business functions or tasks to specific technical roles. The design flaw here, of course, is the way your technical roles have been designed.
The point being, GRC AC 10 is not business-user friendly, so using an intuitive "Role Catalog" really helps the managers understand which technical roles they should be selecting in GRC ARs. They can use this catalog to spit out a list of technical role names that they can then search for within the GRC Access Request.
At all costs, avoid having end-users create ARs. They usually select the wrong access, and the process then becomes very long and drawn out because the role owners or security stages need to mix and match the access after the fact. You should choose a Requestor who has the highest chance of requesting the correct access. This is usually the user's Manager, but you need to propose this solution in a way that won't scare off the manager - at the end of the day, they do NOT want to take on more work.
If you are using SAP HR, then you can attempt HR Triggers for New User Access Requests, which automatically fill out and submit the GRC AR upon a specific HR action (New Hire, or Termination). I do not recommend going down this path, however. It is very confusing, time consuming, and difficult to integrate properly.
Good luck!
-Ken

BEST PRACTICES FOR CREATING DISCOVERER DATABASE CONNECTION -PUBLIC VS. PRIV

I have enabled SSO for Discoverer. So when you browse to http://host:port/discoverer/viewer you get prompted for your SSO
username/password. I have enabled users to create their own private
connections. I log in as portal and created a private connection. I then from
Oracle Portal create a portlet and add a discoverer worksheet using the private
connection that I created as the portal user. This works fine...users access
the portal they can see the worksheet. When they click the analyze link, the
users are prompted to enter a password for the private connection. The
following message is displayed:
The item you are requesting requires you to enter a password. This could occur because this is a private connection or
because the public connection password was invalid. Please enter the correct
password now to continue.
I originally created a public connection...and then follow the same steps from Oracle portal to create the portlet and display the
worksheet. Worksheet is displayed properly from Portal, when users click the
analyze link they are taken to Discoverer Viewer without having to enter a
password. The problem with this is that when a user browses to
http://host:port/discoverer/viewer they enter their SSO information and then
any user with an SSO account can see the public connection...very insecure!
When private connections are used, no connection information is displayed to
SSO users when logging into Discoverer Viewer.
For the very first step, when editing the Worksheet portlet from Portal, I enter the following for Database
Connections:
Publisher: I choose either the private or public connection that I created
Users Logged In: Display same data to all users using connection (Publisher's Connection)
Users Not Logged In: Do no display data
My question is what are the best practices for creating Discoverer Database
Connections.
Is there a way to create a public connection, but not display it in at http://host:port/discoverer/viewer?
Can I restrict access to http://host:port/discoverer/viewer to specific SSO users?
So overall, I want roughly 40 users to have access to my Portal Page Group. I then want to
display portlets with Discoverer worksheets. Certain worksheets I want to have
the ability to display the analyze link. When the SSO user clicks on this they
will be taken to Discoverer Viewer and prompted for no logon information. All
SSO users will see the same data...there is no need to restrict access based on
SSO username...1 database user will be set up in either the public or private
connection.

You can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
So that it won't ask for password.
Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
thnaks
kiran

Best Practices for Defining NDS Java Projects...

We are doing a Proof of Concept on using NDS to develop non-SAP Java applications. We are attempting to determine if we can replace our current Java development tools with NDS/WAS.
We are struggling with SAP's terminology and "plumbing" for setting up/defining Java projects. For example, what is and when do you define Tracks, Software Components, Development Components, etc. All of these terms are totally foreign to us and do not relate to our current Java environment (at least not that we can see). We are also struggling with how the DTR and activities tie in to those components.
If any one has defined best practices for setting up Java projects or has struggled with and overcome these same issues, please provide us with some guidance. This is a very frustrating and time-consuming issue for us.
Thank you!!

Hi Peggy,
In Component Model we divide software projects into small components.Components can use other components in well defined manner.
A development object is a part of a component that can be changed or developed in some way; it provides the component with a certain part of its functionality. A development object may be a Java class, a Web Dynpro view, a table definition, a JSP page, and so on. Development objects are always stored as sources in a repository.
A development component can be defined as a frame shared by a number of objects, which are part of the software.
Software components combine components (DCs) to larger units for delivery and deployment.
A track comprises configurations and runtime systems required for developing software component versions.It ensures stable states of deliverables used by subsequent tracks.
The Design Time Repository is for versioning source code management. Distributed development of software in teams. Transport and replication of sources.
You can also find lot of support in SDN for the above concepts with tutorials.
Refer this Link for a overview on Java development Infrastructure(JDI)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/java development infrastructure jdi overview.pdf
To understand further
Working with Net Weaver Development Infrastructure :
http://help.sap.com/saphelp_nw04/helpdata/en/03/f6bc3d42f46c33e10000000a11405a/content.htm
In the above link you can find all the concepts clearly explained.You can also find the required tutorials for development.
Regards,
Vijith

Best practices for setting up projects

We recently adopted using Captivate for our WBT modules.
As a former Flash and Director user, I can say it’s
fast and does some great things. Doesn’t play so nice with
others on different occasions, but I’m learning. This forum
has been a great source for search and read on specific topics.
I’m trying to understand best practices for using this
product. We’ve had some problems with file size and
incorporating audio and video into our projects. Fortunately, the
forum has helped a lot with that. What I haven’t found a lot
of information on is good or better ways to set up individual
files, use multiple files and publish projects. We’ve decided
to go the route of putting standalones on our Intranet. My gut says
yuck, but for our situation I have yet to find a better way.
My question for discussion, then is: what are some best
practices for setting up individual files, using multiple files and
publishing projects? Any references or input on this would be
appreciated.

Hi,
Here are some of my suggestions:
1) Set up a style guide for all your standard slides. Eg.
Title slide, Index slide, chapter slide, end slide, screen capture,
non-screen capture, quizzes etc. This makes life a lot easier.
2) Create your own buttons and captions. The standard ones
are pretty ordinary, and it's hard to get a slick looking style
happening with the standard captions. They are pretty easy to
create (search for add print button to learn how to create
buttons). There should instructions on how to customise captions
somewhere on this forum. Customising means that you can also use
words, symbols, colours unique to your organisation.
3) Google elearning providers. Most use captivate and will
allow you to open samples or temporarily view selected modules.
This will give you great insight on what not to do and some good
ideas on what works well.
4) Timings: Using the above research, I got others to
complete the sample modules to get a feel for timings. The results
were clear, 10 mins good, 15 mins okay, 20 mins kind of okay, 30
mins bad, bad, bad. It's truly better to have a learner complete
2-3 short modules in 30 mins than one big monster. The other
benefit is that shorter files equal smaller size.
5) Narration: It's best to narrate each slide individually
(particularly for screen capture slides). You are more likely to
get it right on the first take, it's easier to edit and you don't
have to re-record the whole thing if you need to update it in
future. To get a slicker effect, use at least two voices: one male,
one female and use slightly different accents.
6) Screen capture slides: If you are recording filling out
long window based databse pages where the compulsory fields are
marked (eg. with a red asterisk) - you don't need to show how to
fill out every field. It's much easier for the learner (and you) to
show how to fill out the first few fields, then fade the screen
capture out, fade the end of the form in with the instructions on
what to do next. This will reduce your file size. In one of my
forms, this meant the removal of about 18 slides!
7) Auto captions: they are verbose (eg. 'Click on Print
Button' instead of 'Click Print'; 'Select the Print Preview item'
instead of 'Select Print Preview'). You have to edit them.
8) PC training syntax: Buttons and hyperlinks should normally
be 'click'; selections from drop down boxes or file lists are
normally 'select': Captivate sometimes mixes them up. Instructions
should always be written in the correct order: eg. Good: Click
'File', Select 'Print Preview'; Bad: Select 'Print Preview' from
the 'File Menu'. Button names, hyperlinks, selections are normally
written in bold
9) Instruction syntax: should always be written in an active
voice: eg. 'Click Options to open the printer menu' instead of
'When the Options button is clicked on, the printer menu will open'
10) Break all modules into chapters. Frame each chapter with
a chapter slide. It's also a good idea to show the Index page
before each chapter slide with a progress indicator (I use an
animated arrow to flash next to the name of the next chapter), I
use a start button rather a 'next' button for the start of each
chapter. You should always have a module overview with the purpose
of the course and a summary slide which states what was covered and
they have complete the module.
11) Put a transparent click button somewhere on each slide.
Set the properties of the click box to take the learner back to the
start of the current chapter by pressing F2. This allows them to
jump back to the start of their chapter at any time. You can also
do a similar thing on the index pages which jumps them to another
chapter.
12) Recording video capture: best to do it at normal speed
and be concious of where your mouse is. Minimise your clicks. Most
people (until they start working with captivate) are sloppy with
their mouse and you end up with lots of unnecessarily slides that
you have to delete out. The speed will default to how you recorded
it and this will reduce the amount of time you spend on changing
timings.
13) Captions: My rule of thumb is minimum of 4 seconds - and
longer depending on the amount of words. Eg. Click 'Print Preview'
is 4 seconds, a paragraph is longer. If you creating knowledge
based modules, make the timing long (eg. 2-3 minutes) and put in a
next button so that the learner can click when they are ready.
Also, narration means the slides will normally be slightly longer.
14) Be creative: Capitvate is desk bound. There are some
learners that just don't respond no matter how interactive
Captivate can be. Incorporate non-captivate and desk free
activities. Eg. As part of our OHS module, there is an activity
where the learner has to print off the floor plan, and then wander
around the floor marking on th emap key items such as: fire exits;
first aid kit, broom and mop cupboard, stationary cupboard, etc.
Good luck!

Best practice for external but secure access to internal data?

We need external customers/vendors/partners to access some of our company data (view/add/edit). It’s not so easy as to segment out those databases/tables/records from other existing (and put separate database(s) in the DMZ where our server is). Our
current solution is to have a 1433 hole from web server into our database server. The user credentials are not in any sort of web.config but rather compiled in our DLLs, and that SQL login has read/write access to a very limited number of databases.
Our security group says this is still not secure, but how else are we to do it? Even if a web service, there still has to be a hole in somewhere. Any standard best practice for this?
Thanks.

Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
http://pauliom.wordpress.com

Best practice for hierarchical DTOs?

Hi!
Can someone tell me the best practice for hierarchical DTOs?
Use case: I've got a User object which holds one Folder object, which in turn holds a Set of Folder objects (children).
class User {
Folder rootFolder;
class Folder {
Set children;
}Normally, I'd fetch the user data with the help of a DAO from the database, copy the requested properties into a User-DTO, which will be transfered to the view. But what about the Folder objects?
Should I create a Folder-DTO class and copy each Folder property into the respective DTO object - in other words: rebuild the whole hierarchy? Or is there a better solution?
Thanks a lot!
Walter

Normally, I'd fetch the user data with the help of a
DAO from the database, copy the requested properties
into a User-DTO, which will be transfered to the view.
But what about the Folder objects?
Should I create a Folder-DTO class and copy each
Folder property into the respective DTO object - in
other words: rebuild the whole hierarchy? Or is there
a better solution?It isn't recursive right?
So this is just a standard association.
How you handle it depends on usage.
As a guess perhaps you are thinking that you can only have one User DTO class. That isn't true. You can have several. For example one that contains the association and one that does not.
Or you have just one. And either it contains the association or you provide another mechanism that returns just the association given a specific instance of a User DTO (or some other identifier to the specific User.)

Best Practice for Using Static Data in PDPs or Project Plan

Hi There,
I want to make custom reports using PDPs & Project Plan data.
What is the Best Practice for using "Static/Random Data" (which is not available in MS Project 2013 columns) in PDPs & MS Project 2013?
Should I add that data in Custom Field (in MS Project 2013) or make PDPs?
Thanks,
EPM Consultant
Noman Sohail

Hi Dale,
I have a Project Level custom field "Supervisor Name" that is used for Project Information.
For the purpose of viewing that "Project Level custom field Data" in
Project views , I have made Task Level custom field
"SupName" and used Formula:
[SupName] = [Supervisor Name]
That shows Supervisor Name in Schedule.aspx
============
Question: I want that Project Level custom field "Supervisor Name" in
My Work views (Tasks.aspx).
The field is enabled in Task.aspx BUT Data is not present / blank column.
How can I get the data in "My Work views" ?
Noman Sohail

Best practice for a deplomyent (EAR containing WAR/EJB) in a productive environment

Hi there,
I'm looking for some hints regarding to the best practice deployment in a productive
environment (currently we are not using a WLS-cluster);
We are using ANT for buildung, packaging and (dynamic) deployment (via weblogic.Deployer)
on the development environment and this works fine (in the meantime);
For my point of view, I would like to prefere this kind of Deploment not only
for the development, also for the productive system.
But I found some hints in some books, and this guys prefere the static deployment
for the p-system.
My question now:
Could anybody provide me with some links to some whitepapers regarding best practice
for a deployment into a p-system ??
What is your experiance with the new two-phase-deploment coming up with WLS 7.0
Is it really a good idea to use the static deployment (what is the advantage of
this kind of deployment ???
THX in advanced
-Martin

Hi Siva,
What best practise are you looking for ? If you can be specific on your question we could provide appropriate response.
From my basis experience some of the best practices.
1) Productive landscape should have high availability to business. For this you may setup DR or HA or both.
2) It should have backup configured for which restore has been already tested
3) It should have all the monitoring setup viz application, OS and DB
4) Productive client should not be modifiable
5) Users in Production landscape should have appropriate authorization based on SOD. There should not be any SOD conflicts
6) Transport to Production should be highly controlled. Any transport to Production should be moved only with appropriate Change Board approvals.
7) Relevant Database and OS security parameters should be tested before golive and enabled
8) Pre-Golive , Post Golive should have been performed on Production system
9) EWA should be configured atleast for Production system
10) Production system availability using DR should have been tested
Hope this helps.
Regards,
Deepak Kori

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Best practice for keeping a mail session open in web application?

Hello,
We have a webmail like application where users login with their IMAP credentials, then are taken to an authenticated area of the site where they can manage different things about their email account.
Right now the application is opening and closing a mail store connection (via a new javax.mail.Session) for each page load based on the current logged in user credentials. To me this seems like it would be a bad practice to keep opening and closing a connection each page load.
Are there any best practices for this situation? It would be nice to be able to open the connection to the mail server on login, then keep that connection open until the person logs out, session expires, etc.
I can probably put the javax.mail.Session into the HTTP session, but that seems like it would break any clustering functionality of tomcat. This would be fine if the machine the user is on didn't fail, but id assume if they failed over to another the mail session would be gone. Maybe keeping the mail session in the http session, checking for a connection, then first attempting to reconnect with the logged in credentials before giving up would be a possiblity?
Any pointers would be appreciated

If you keep the connection open across pages, you're going to need to deal with
timeouts - from the http session and from the mail server.
If you don't keep the connection open, you're going to need to "resynchronize"
your view of the store/folder with each operation, in case the folder is modified
by another session.
The former is easier in the common cases, especially if you don't care how gracefully
you handle failures. The latter is more difficult in the common cases, but handles
failure better, and in particular handles clustering better. You'll need to measure it to
see if it meets your performance and scalability requirements. You may need to mix
the two approaches to get acceptable performance.

Best practice for linking fields from multiple entity objects

I am currently transitioning from PHP to ADF. I'm looking for the best practice for linking data from multiple entity objects.
Example:
EO 'REQUESTS' has fields: req_id, name, dt, his_stat_id, her_stat_id
EO 'STATUSES' has fields: stat_id, short_txt_descr
'REQUESTS' is linked to EO 'STATUSES' on: STATUSES.stat_id = REQUESTS.his_status_id
'REQUESTS' is also linked to EO 'STATUSES' on: STATUSES.stat_id = REQUESTS.her_status_id
REQUESTS.his_status_id is independent of REQUESTS.her_status_id
When I create a VO for REQUESTS, I want to display: REQUESTS.name, REQUESTS.dt, STATUSES.short_txt_descr (for his_stat_id), STATUS.short_txt_descr (for her_stat_id)
What is the best practice for accomplishing this? It appears I could do it a few different ways:
1. Create the REQUESTS VO with a LOV for his_stat_id and her_stat_id
2. Create the REQUESTS VO with the join to STATUSES performed within the query for the VO. This would require joining on the STATUSES EO twice (his_stat_id, her_stat_id)
3. I just started reading about View Links - would that somehow do what I'm looking for?
I also need to be able to update his_status_id and her_status_id through the by selecting a STATUSES.short_txt_descr from a dropdown.
Any suggestions on how to approach such a stupidly simple task?
Using jDeveloper 11.1.2.2.0 if that makes a difference in the solution.
Thanks ahead of time,
CJ

CJ,
I vote for solution 1 as it's just your use case. As you said you what to update the his_status_id and her_status_id through the by selecting a STATUSES.short_txt_descr by a drop down. This is exactly the LOV solution.
ViewLinks are used fro master detail navigation (which you don't do here) and Joining the data make it difficult to update (and you still need a LOV for the drop down box.
Timo

Best practice for bi backup

Hi,
Who can suggest me the best practice for backup/restore of entire bi dashboard reports, permissions and etc?
Ed,

Hi,
If you want move the entire dashboards,reports ,permissions
Zip the *<OracleBIData>Web/catalog* folder and move it new environment. In new envornment unzip this catalog and in Instanceconfig.xml mention the path for this new catalog.
If you want move the few dashboads or reports ,do it by Catalog Manager.
Thank you.

Best-practice for Catalog Views ? :|

Similar Messages

Maybe you are looking for