Best Practices for Loading Data in 0SD_C03

Hi, Guru, I want to know which is the best practice to have information about Sales, billing, delivery. I know it has this Datasources.
Sales Order Item Data - 2LIS_11_VAITM
Billing Document Data: Items - 2LIS_13_VDITM
Billing Document Header Data - 2LIS_13_VDHDR
Sales-Shipping: Allocation Item Data - 2LIS_11_V_ITM
Delivery Header Data - 2LIS_12_VCHDR
Delivery Item Data - 2LIS_12_VCITM
Sales Order Header Data - 2LIS_11_VAHDR
Do I have to load all this Datasource to Infocube 0SD_C03 or I have to create copy of 0SD_C03 to mach with each Datasources.

Hi.
    If you just want to statistic the amount or quantity of the sales process,I suppose you to create 3 cubes and then use a multi provider to integrated those 3 cubes you created.for example:
    2LIS_11_VAITM -> ZSD_C01
    2LIS_12_VCITM -> ZSD_C02
    2LIS_13_VDITM -> ZSD_C03
In this scenario,you can enhance the 2lis_12_vcitm and 2lis_13_vditm with sales order data,such as request delivery date etc..and then create a Multiprovider such as ZSD_M01.
Best Regards
Martin Xie

Similar Messages

Best practices for loading apo planning book data to cube for reporting

Hi,
I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting.
I have seen 2 types of Design:
1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then get transferred to the Actual BW system. Reports are run from the Actual BW system cube.
2) The Planning Book Extractor data is loaded directly to a cube within the Actual BW system.
We do these data loads during evening hours once in a day.
Rgds
Gk

Hi GK,
What I have normally seen is:
1) Data would be extracted from APO Planning Area to APO Cube (FOR BACKUP purpose). Weekly or monthly, depending on how much data change you expect, or how critical it is for business. Backups are mostly monthly for DP.
2) Data extracted from APO planning area directly to DSO of staging layer in BW, and then to BW cubes, for reporting.
For DP monthly, SNP daily
You can also use the option 1 that you mentioned below. In this case, the APO cube is the backup cube, while the BW cube is the one that you could use for reporting, and this BW cube gets data from APO cube.
Benefit in this case is that we have to extract data from Planning Area only once. So, planning area is available for jobs/users for more time. However, backup and reporting extraction are getting mixed in this case, so issues in the flow could impact both the backup and the reporting. We have used this scenario recently, and yet to see the full impact.
Thanks - Pawan

Best practice for heirachical data

First off, I have to say that JMX in Java 6 is terrific stuff. Bundling jconsole in with Java has made JMX adoption so much easier for us.
Now, to my question. We have read-only hierarchical data (think a DOM tree) that we would like to publish via JMX. What is the best practice? We see two possibilities:
1. Publish each node of the tree with it's own object name and type. This will allow jconsole to display the information in the tree control.
2. Publish just the root of the tree with an object name and type and then use CompositeType to describe the nodes of the tree. This means you look at the tree in the "Attribute Value" panel of jconsole.
Is there any best practices for such data? We have implemented #2 and it works but we are wondering if long term this might lead to unforeseen consequences.
Thanks in advance.
--Marty

Path,
I did go with #1 and it worked out great. Every node in our tree is an ObjectName node. Works very well for us.
--Marty

Best practice for sharing data with model window

Hi team,
what would the best practice for sharing data with a modal
window be ? I use a modal window to display record details from a
record list, but i am not quite sure how to access the data from
the components in the main application in the modal window.
Any hints would be welcome
Best
Frank

Pass a reference to the parent into the modal popup. Then you
can reference anything in the parent scope.
I haven't done this i 2.0 yet so I can't give you code. I'll
post if I do.
Oh, also, you can reference the parent using parentDocument.
So in the popup you could do:
parentDocument.myPublicVariable = "whatever";
Tracy

Best practices for initial data loads to MDM

Hi,
We need to load more than 300000 vendors from SAP into MDM production repository. Import server might take days to load that much if no error occurs.
Are there any best practices for initial loads to MDM available? What considerations must be made while doing the initial loads.
Harsha

Hello Harsh
With SP05 patch1 there is a file aggregation functionality in the import port. Is is supposed to optimize the import performance.
BTW, give me your mail address and I will send you an idoc packaging paper for MDM.
Regards,
Goekhan

Where to find best practices for tuning data warehouse ETL queries?

Hi Everybody,
Where can I find some good educational material on tuning ETL procedures for a data warehouse environment? Everything I've found on the web regarding query tuning seems to be geared only toward OLTP systems. (For example, most of our ETL
queries don't use a WHERE statement, so the vast majority of searches are table scans and index scans, whereas most index tuning sites are striving for index seeks.)
I have read Microsoft's "Best Practices for Data Warehousing with SQL Server 2008R2," but I was only able to glean a few helpful hints that don't also apply to OLTP systems:
often better to recompile stored procedure query plans in order to eliminate variances introduced by parameter sniffing (i.e., better to use the right plan than to save a few seconds and use a cached plan SOMETIMES);
partition tables that are larger than 50 GB;
use minimal logging to load data precisely where you want it as fast as possible;
often better to disable non-clustered indexes before inserting a large number of rows and then rebuild them immdiately afterward (sometimes even for clustered indexes, but test first);
rebuild statistics after every load of a table.
But I still feel like I'm missing some very crucial concepts for performant ETL development.
BTW, our office uses SSIS, but only as a glorified stored procedure execution manager, so I'm not looking for SSIS ETL best practices. Except for a few packages that pull from source systems, the majority of our SSIS packages consist of numerous "Execute
SQL" tasks.
Thanks, and any best practices you could include here would be greatly appreciated.
-Eric

Online ETL Solutions are really one of the biggest challenging solutions and to do that efficiently , you can read my blogs for online DWH solutions to know at the end how you can configure online DWH Solution for ETL using Merge command of SQL Server
2008 and also to know some important concepts related to any DWH solutions such as indexing , de-normalization..etc
http://www.sqlserver-performance-tuning.com/apps/blog/show/12927061-data-warehousing-workshop-1-4-
http://www.sqlserver-performance-tuning.com/apps/blog/show/12927103-data-warehousing-workshop-2-4-
http://www.sqlserver-performance-tuning.com/apps/blog/show/12927173-data-warehousing-workshop-3-4-
http://www.sqlserver-performance-tuning.com/apps/blog/show/12927061-data-warehousing-workshop-1-4-
Kindly let me know if any further help is needed
Shehap (DB Consultant/DB Architect) Think More deeply of DB Stress Stabilities

Best practices for loading swf's

Greetings,
Using CS5 AS2
I'm creating a website in flash (all the files will be in one directory/folder on SharePoint) and want to make sure that what seems to be working fine is best practice.
I have an index.swf with many buttons which will take the user to landing pages/content/other swfs. On these different buttons I have the script...
on (release) {loadMovieNum("name.swf", 0);} I could also do just {loadMovie("name.swf", 0);} ??
The movie transitions nicely to name.swf and on this page I have a button that returns the user to the index.swf...
on (release) {loadMovieNum("index.swf", 0);} Things move back to index.swf nicely and user can chose to go to another landing page.
It looks like I'm on the right track, bc nothing is going awry? but want to check. Am I following best practices for moving from one swf to another within a website?
Thanks for help or confirmation!!

loading into _level0 (and you should use loadMovieNum, not loadMovie, when loading into a level) undermines some of the benefits of a flash application: all the assets must load with each display change and the user sees a flash instead of appearing to transition seamlessly from one display to the next.

Best practices for accessing data in subviews

I've got two iPhone projects which share most of their code base. I'm trying to figure out the best way to load data from some plist files and store them in a common container UIView and provide access to the data for subviews and subviews of the subviews, etc. Right now I've got the data being passed from the container view to the subviews it creates and then the subview themselves pass it further, basically a bucket brigade to get the data to where it needs to go which could be 3 or 4 views down in the hierarchy.
Is there a better approach? I've looked at delegates & protocols but I'm having a hard time understanding how they work and whether they are appropriate in this situation. Originally I had the app delegate holding the data and any class anywhere could invoke the app delegate and get the data. However this approach fails with 2 projects because the app delegates have different names and the classes that need to access it are common to both projects. Can the app delegate be renamed without significant impact? Or is there a way a UIView can be set up as a delegate in much the same way?
Thanks for any advice!
Greg

Hi Greg - You can rename the app delegate class to whatever you want, just remember to change it in IB, and make sure you catch any place it already appears in your code. I guess there's no need to change the app delegate class file names unless you want to.
However there are lots of other solutions to your problem. A case could be made for declaring a global pointer to this data, for example. Or, you could encapsulate the data wherever you want and make an extern (globally visible) C function to access it.
Another solution would be to put the data in a shared object which would be accessed just like the shared app object, e.g.
#include "MyObject.h"
NSDictionary *myPlistData = [MyObject sharedObject].plistData;
I just got done looking at "how to make a shared object" in the Cocoa docs and can't seem to find it atm. Anyway it's in there somewhere, either in an Obj-C doc or one of the top level guides. The job just wants a class method that returns the pointer stored in a static C var; if the var is nil, the object is first created and its addy is stored in the var.
Hope that helps!
- Ray

Best practice for loading config params for web services in BEA

Hello all.
I have deployed a web service using a java class as back end.
I want to read in config values (like init-params for servlets in web.xml). What
is the best practice for doing this in BEA framework? I am not sure how to use
the web.xml file in WAR file since I do not know how the name of the underlying
servlet.
Any useful pointers will be very much appreciated.
Thank you.

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best Practices for Loading Master Data via a Process Chain

Currently, we load attributes, text, and hierarchies before loading the transactional data. We have one meta chain. To load the master data it is taking more than 2 hours. Most of the master data is full loads. We've noticed that a lot of the master data, especially text, has not changed or changed very little since we implemented 18 months ago. Is there a precedence or best practice to follow such as do we remove these processes from the chain? If so, how often should it be run? We would really like to reduce the amount of the master data loading time. Is there any documentation that I can refer to? What are other organizations doing to reduce the amount of time to load master data?
Thanks!
Debby

Hi Debby,
I assume you're loading Master Data from a BI system? The forum here are related to SAP NetWeaver MDM, so maybe you should ask this question in a BI forum?
Nevertheless, if your data isn't changed this much, maybe you could use a delta mechanism for extraction? This would send only the changed records and not all the unchanged all the time. But this depends on your master data and of course on your extractors.
Cheers
Michael

Best practice for extracting data to feed external DW

We are having a healthy debate with our EDW team about extracting data from SAP. They want to go directly against ECC tables using Informatica and my SAP team is saying this is not a best practice and could potentially be a performance drain. We are recommending going against BW at the ODS level. Does anyone have any recommendations or thoughts on this?

Hi,
As you asked for Best Practice, here it is in SAP landscape.
1. Full Load or Delta Load data from SAP ECC to SAP BI (BW): SAP BI understand the data element structure of SAP ECC, and delta mechanism is the continous process of data load from a SAP ECC (transaction system) to BI (Analytic System).
2. You can store transaction data in DSOs (granular level), and in InfoCubes (at a summrized level) within SAP BI. You can have master data from SAP ECC coming into SAP BI separately.
3. Within SAP BI, you SHOULD use OpenHub service to provide SAP BI data to other external system. You must not connect external extractor to fetch data from DSO and InfoCube to target system. OpenHub service is the tool that faciliate data feeding to external system. You can have Informatica to take data from OpenHubs of SAP BI.
Hope I explain to best of your satisfaction.
Thanks,
S

Best practice for migrating data tables- please comment.

I have 5 new tables seeded with data that need to be promoted from a development to a production environment.
Instead of the DBAs just using a tool to migrate the data they are insistent that I save and provide scripts for every single commit, in proper order, necessary to both build the table and insert the data from ground zero.
I am very unaccustomed to this kind of environment and it seems much riskier for me to try and rebuild the objects from scratch when I already have a perfect, tested, ready model.
They also require extensive documentation where every step is recorded in a document and use that for the deployment.
I believe their rationale is they don't want to rely on backups but instead want to rely on a document that specifies each step to recreate.
Please comment on your view of this practice. Thanks!

>
Please comment on your view of this practice. Thanks!
>
Sounds like the DBAs are using best practices to get the job done. Congratulations to them!
>
I have 5 new tables seeded with data that need to be promoted from a development to a production environment.
Instead of the DBAs just using a tool to migrate the data they are insistent that I save and provide scripts for every single commit, in proper order, necessary to both build the table and insert the data from ground zero.
>
The process you describe is what I would expect, and require, in any well-run environment.
>
I am very unaccustomed to this kind of environment and it seems much riskier for me to try and rebuild the objects from scratch when I already have a perfect, tested, ready model.
>
Nobody cares if if is riskier for you. The production environment is sacred. Any and all risk to it must be reduced to a minimum at all cost. In my opinion a DBA should NEVER move ANYTHING from a development environment directly to a production environment. NEVER.
Development environments are sandboxes. They are often not backed up. You or anyone else could easily modify tables or data with no controls in place. Anything done in a DEV environment is assumed to be incomplete, unsecure, disposable and unvetted.
If you are doing development and don't have scripts to rebuild your objects from scratch then you are doing it wrong. You should ALWAYS have your own backup copies of DDL in case anything happens (and it does) to the development environment. By 'have your own' I mean there should be copies in a version control system or central repository where your teammates can get their hands on them if you are not available.
As for data - I agree with what others have said. Further - ALL data in a dev environment is assumed to be dev data and not production data. In all environments I have worked in ALL production data must be validated and approved by the business. That means every piece of data in lookup tables, fact tables, dimension tables, etc. Only computed data, such as might be in a data warehouse system generated by an ETL process might be exempt; but the process that creates that data is not exempt - that process and ultimately the data - must be signed off on by the business.
And the business generally has no access to, or control of, a development environment. That means using a TEST or QA environment for the business users to test and validate.
>
They also require extensive documentation where every step is recorded in a document and use that for the deployment.
I believe their rationale is they don't want to rely on backups but instead want to rely on a document that specifies each step to recreate.
>
Absolutely! That's how professional deployments are performed. Deployment documents are prepared and submitted for sign off by each of the affected groups. Those groups can include security, dba, business user, IT and even legal. The deployment documents always include recovery steps so that is something goes wrong or the deployment can't procede there is a documented procedure of how to restore the system to a valid working state.
The deployments themselves that I participate in have representatives from the each of those groups in the room or on a conference call as each step of the deployment is performed. Your 5 tables may be used by stored procedures, views or other code that has to be deployed as part of the same process. Each step of the deployment has to be performed in the correct order. If something goes wrong the responsible party is responsible for assisting in the retry or recovery of their component.
It is absolutely vital to have a known, secure, repeatable process for deployments. There are no shortcuts. I agree, for a simple 5 new table and small amount of data scenario it may seem like overkill.
But, despite what you say it simply cannot be that easy for one simple reason. Adding 5 tables with data to a production system has no business impact or utility at all unless there is some code, process or application somewhere that accesses those tables and data. Your post didn't mention the part about what changes are being made to actually USE what you are adding.

Obiee 11g : Best practice for filtering data allowed to user

Hi gurus,
I have a table of the allowed areas for each user.
I want to show only the data facts associated with these allowed areas.
For instance my user scott can see France and Italy data.
I made a variable session. I put this session variable in a filter.
It works ok but only one value (the first one i think) is taken in account (for instance, with my solution scott will see only france data).
I need all the possible values.
I tried with the row wise parameter of the variable session. But it doesn't work (error obiee).
I've read things on internet about using stragg or valuelistof but neither worked.
What would be the best practice to achieve this goal of filtering data with conditions by user stored in database ?
Thanks in advance, Emmanuel

Check this link
http://oraclebizint.wordpress.com/2008/06/30/oracle-bi-ee-1013332-row-level-security-and-row-wise-intialized-session-variables/

Best practice for load balancing on SA540

Are there some 'best practice' guide to configure out load balancing on SA540 .?
I've got 2 ADSL lines and would like device to auto manage outgoing traffic .. Any idea ?
Regards

Hi,
SA500 today implements flow based round robin load balancing scheme.
In the case of two WAN link (over ADSL), by default, the traffic should be "roughly" equally distributed.
So in general, users should have no need to configure anything further for load balancing.
The SA500 also supports protocol binding (~PBR) over WAN links. This mechanism offers more control on how traffic can flow.
For example, if you have 1 ADSL with higher throughput than the other ADSL link offers, you can consider to bind bandwidth-hungry app on the WAN link connecting to the higher ADSL link and the less bandwidth-hungary app on the other one. The other traffic can continue to do round robin. This way you won't saturate the low bandwidth link and give users better application experiences.
Regards,
Richard

Best Practice for Master Data Reporting

Dear SAP-Experts,
We face a challenge at the moment and we are still trying to find the right approach to it:
Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
Questions they want to answer here are for example:
- How many active Materials/SKUs do we have?
- Which country/Sales Org has adopted certain Materials?
- How many Series do we have?
- How many SKUs below to a specific season
- How many SKUs are in a certain product lifecycle
- etc.
The challenge is, that the Master Data is stored in tables with different keys in the R/3.
The keys in these tables are on various levels (a selection below):
- Material
- Material / Sales Org / Distribution Channel
- Material / Grid Value
- Material / Grid Value / Sales Org / Distribution Channel
- Material / Grid Value / Sales Org / Distribution Channel / Season
- Material / Plant
- Material / Plant / Category
- Material / Sales Org / Category
etc.
So even though the information is available on different detail levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
Best regards
Lukas

Pass a reference to the parent into the modal popup. Then you
can reference anything in the parent scope.
I haven't done this i 2.0 yet so I can't give you code. I'll
post if I do.
Oh, also, you can reference the parent using parentDocument.
So in the popup you could do:
parentDocument.myPublicVariable = "whatever";
Tracy

Best Practices for Loading Data in 0SD_C03

Similar Messages

Maybe you are looking for