Best way to change iProc default for Internal vs External Source

We are using iProc for items that are available both from external suppliers and internal warehouses. Unfortunately, our sourcing rules are set up such that the source defaults to external even if the item is available internally. We cannot set up our sourcing rules to generate a default source of Internal but the business "requires" that the default source is Internal (so long as the item is available internally - it needs to be External if it is not available internally). I have dug around in the code and I cannot see a nice way of customising the pages to achieve that.
Has anyone else had this problem, and if so, have you been able to change the default?

Unfortunately, it is very specific to iProcurement - when you add an Item to the Requisition Shopping Cart, it needs to know the source of the item for the Requisition (whether it is internal from existing warehouse stock or external from a supplier) - this is the "Source" that I am talking about.
There are at least four different pages that have functionality to add items to the shopping cart (all in the oracle/apps/icx/icatalog/shopping or oracle/apps/icx/por/reqmgmt packages).
When adding to the cart, it is creating an oracle/apps/icx/por/schema/server/PoRequisitionLineEO object, but with the exception of one of the pages, the field is populated by a default.
Where there is a choice of sources, the user can explicitly select them on the oracle/apps/icx/icatalog/shopping/webui/SelectSourcePG page, but from what we can see, the same logic to set the default on this page is what is used if the user doesn't go to the page.
This SelectSourcePG uses the oracle/apps/icx/icatalog/shopping/server/SelectSourceSvrCmd class to populate and default this page. The basic default (internal or external) is driven off the logic in the POR_AUTOSOURCE_UTIL_PKG.AUTOSOURCE stored PL/SQL Packaged Procedure. This procedure queries the Purchasing Sourcing Rules and for our data (unfortunately) this always returns a default External source.
Based on your answer to my other post, I will try a warning message on the creation of the entity object and see how that goes.

Similar Messages

Best way to change Iphoto library referenced across multiple external drives

Hello,
I am relatively new to mac and I think I've gotten myself into trouble with my large collection of photos. I have a single iphoto library which references photos on multiple external drives. However, iphoto is now very slow to launch and I believe this is due to the number of photos (~160k+, I think) in the library. How should I reconfigure my iphoto library for better performance? I would still prefer to have a single library if possible, am willing to have multiple if necessary.
Is the best approach to destroy my iphoto library and recreate multiple libraries, one for each drive with the libraries being located on the external drives with the photos? Any negatives to this? I am really worried about losing photos.
From searching the forums I believe I have an approach but I am uncertain if it is the best way. Is the best approach to destroy my iphoto library and recreate multiple libraries, one for each drive with the libraries being located on the external drives with the photos? Any negatives to this? I am really worried about losing photos.
The library itself is on the main hard drive while the photos are spread across 3 external drives, with some on the main drive as well. I have been manually importing the photos through finder, then adding them to iphoto. I am using Iphoto 11.
Any tips, pointers, etc. would be greatly appreciated. Thanks.

1 - a referenced library is extremely problematic and is strongly not recommended - especially one spread accross several volumes
2 - iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can convert to a managed library - check the option to copy imported items to the iPhoto library and rebuil using IPLM
3 - this is likely to cure the slowness too
4 - multiple libraries are not necessary or desireable
5 - the only protection against losing photos is a great backup scheme - I run Time Machine giving me hourly backups and do a daily bootable clone giving a second backup - plus do an occasional off site backup
LN

What's the best way to move photo folders from internal to external HD using LR to track change?

I am trying to move my photo folders from Pictures on an iMac running Mavericks to an external HD as my main photo storage and to do so with LR 5.6 keeping track of the folders. I have 20K plus photos in the Catalog in the iMac's HD and wouldn't want LR to loose track of the photos. I am not creating duplicates but moving all the files w/original photos and edits.
Is there a good and safe method to use LR to perform this task?

In your operating system, move the photos to the external HD, keeping the folder structure unchanged, and then in Lightroom reconnect using these instructions: Adobe Lightroom - Find moved or missing files and folders

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

The app developer chooses the alert sound, or provides a way for you to change it.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

Is there a way to change the default Save As location for Adobe Reader XI?

Is there a way to change the default Save As location for Adobe Reader XI?

kel-drago wrote:
Can't be that difficult to arrange.
No, it's not. But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Best way to change the speed of a sequence of linked short clips?

I have a sequenced project of about 150 short 1 second clips linked together via a crossfade transition... I would like to make the timelapse faster. What is the best way to change the speed of the sequence or the clips themselves? I would rather change the sequence for it would be less labor intensive I would imagine!!
Thanks
RD

Or...select all the clips in the timeline, control-click (or right-click) on them and select 'Duration'. Change the duration to whatever will fit/fill the timespan you need, then hit OK.
If you're needing to change the dissolve as well, you should remove all but one of them first, then drag the remaining transition into the browser. Dbl-click it into the viewer, set the duration of what you want, then use the hand icon at top right and drag it back into the browser. Rename it relevent to it's new duration, then control-click on it and select "Make Default".
Now, set an inpoint at the first frame of your clips in the timeline, then drag all the shortened clips from the timeline into the canvas and release where it says 'Overwrite with Transition'.
That's another way to accomplish this.
K

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Best way to give a default value to a New Column with existing rows

Adding some columns to SQL tables with existing data rows. There are also views created from these tables. The views are used in some report/query software so NULL values are not good. Interested in learning about the best way to set a default value.
These are the ways that I can think of
1) ALTER TABLE using the DEFAULT to add the column and set the default value
++ Adds a constraint which is not terrible. Constraints are just not used much in this shop.
2) ALTER TABLE to add the column then do an UPDATE statement to update the values
++ might be an issue for tables with millions of rows
3) ALTER TABLE to add the column then use ISNULL in the CREATE VIEW

It is a large table with 444 columns and max row size of 2268. 907k records took 1 minute 38 seconds to UPDATE the column. I have about 12 fields to add to this table and about 44 tables (not all this large of course) so it will take some time to
UPDATE. Although ... i just tried updating 3 columns in a single UPDATE and it took 1 minute 36 seconds. So If I did all 12 fields in a single UPDATE it would be about the same time as a single Field. I will think about it.

Best Way to Define Employee Numbering For Different Countries

HI all
I am working on for a project which will be for Multiple countries.But Each country has different Instances.Now the questions is What could be the Best way to Define Employee numbering for all the Regions ? As for as My knowledge goes It would be Number prefixed by Country.Then How we can have Alpha numeric in employee Coding ? We need to have Fast Formula to Ahieve this task.If any body has come across this scenario please share your thoughts .Any thoughts are greatly Appreciated.
Cheers
Kumar cs

If you have each country on a different instance and you want employees to retain their employee number on transfer between countries, I believe you have two options:
i) Use manual numbering. One recent change to the system is that you can update the numbering profile from Auto to Manual and back to Auto again. So you could potentially leverage this manual workaround when a cross BG transfer happens.
ii) Bespoke module to export all emp numbers into a 'central repository', e.g., flat file, that can be accessed by all instances, imported regularly and then referenced by your Fast Formula. You would also need processing to determine when a person is a transfer from another BG or a new hire; probably have to be some control field on flex. Basically, this is a requirement made difficult by the decision to host each legislation on a different instance; I would never recommend clients to go down this route but I guess it's too late in your case.
If cross BG transfers are not common, e.g., less than 5 a week, I would recommend option 1.

Best way to change fund posted in an EBS document

What is the best way to change the fund in one line item in a document produced when the electronic bank statment is processed? The bank charges fees that come through the statement and should post to a different fund then any other item such as checks, etc.
I am trying a substitution but coming across the error Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002.

The error message that I was receiving...Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002, was coming from function module EXIT_RFEBBU10_001 and include ZXF01U01. The programming code was attempting to default a cost center when the external transaction code = 661. The coding was removed and the default acct assignment cost center was added to the cost element master data. The substitution also worked correctly as it should.

Newbie Quesion: Best way to change colour of a movie

Hi,
Could someone tell me the best way to change the colour of
one element of a
movieclip in AS2?
Say for example I had a filled white circle in the middle of
a black square,
how can I change just the colour of the circle?
I have tried this.myColor.setRGB( color ); but that sets the
entire clip to
be of one colour. Do I need ( as I suspect ) one clip on top
of another or
is there any way of keeping details of the clip being
changed?
TIA
Wil

Cheers jdh,
This is one method I'd considered.
I'll give it a bash.
Wil
"jdh239" <[email protected]> wrote in
message
news:ens1vd$ahn$[email protected]..
> Don't know if this will help, but this code changes the
color of my
> "LOADING"
> text while it is loading. Should have the essential code
to do what you
> are
> looking for.
>
> Make the white circle a movie clip and pick the
following code apart to
> get it
> to change colors:
>
>
>
> stop();
> loading.gotoAndPlay(1);
> import flash.geom.ColorTransform;
> import flash.geom.Transform;
> var colorTrans:ColorTransform = new ColorTransform();
> var trans:Transform = new Transform(loading);
> trans.colorTransform = colorTrans;
> loadI = setInterval(loadF, 100);
> function loadF() {
> percent =
Math.floor(_root.getBytesLoaded()/_root.getBytesTotal()*100);
> if (percent<=39) {
> colorTrans.rgb = 0x0000FF;
> // blue
> trans.colorTransform = colorTrans;
> } else if ((percent>39) && (percent<60)) {
> colorTrans.rgb = 0x00FF00;
> // green
> trans.colorTransform = colorTrans;
> } else if ((percent>60) && (percent<80)) {
> colorTrans.rgb = 0xFF8000;
> // orange
> trans.colorTransform = colorTrans;
> } else if ((percent>80) && (percent<99)) {
> colorTrans.rgb = 0xFF0000;
> // red
> trans.colorTransform = colorTrans;
> } else if (percent>=99) {
> clearInterval(loadI);
> _root.gotoAndPlay(16);
> } else {
> loading.gotoAndPlay(1)
> }
> }
>

Can I change the default for podcast deletion after listening?

I have only just discovered that many of my cherished podcasts have been getting deleted after I listen to them. I originally set the option to NEVER delete after listening when I first installed iTunes years ago and I haven't change it since. However, I can only assume that it was changed by Apple during an upgrade at some point and I never noticed. The delete after listening option has been set to On for podcasts going back many years (2008 at least).
Two questions:
1. Is there some way to change the default setting to Off?
2. Is there a way to bulk change the setting for multiple existing podcasts?
Thanks.
For what it;'s worth; I'm running iTunes 12.1.2.27 on Windows 7 64-bit on a Dell Latitude laptop.

Choose the Podcast view you are using (either Podcasts/Podcasts or Podcasts/Episode List) from below:
or
and select Delete Played Episodes <Off> from the drop-down menu

Best way to change iProc default for Internal vs External Source

Similar Messages

Maybe you are looking for