Best way to create Contact form in WPC.

Hello,
What is the best way to create a contact form ( that sends email on clicking the submit button ) in WPC.
Should I be using a page layout (jsp) to implement the mailing functionality.
Thanks
Tony.

I am getting
javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: SCHLAP103481, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect
SCHLAP103481 is my laptop name.
Which host name Do I have to give on this line of code:
props.put("mail.smtp.host", "SCHLAP103481");
Thanks

Similar Messages

Best way to create a form that can be emailed and also secured down.

Hi,
I work in a manufacturing company that tests each raw material as it comes in the door. The results from the tests are currently handwritten on a template form that is printed first. The sheets are then sent to another department who types up the results and saves them individually as a Word document. There is a HUGE paper trail and increased margin for error. Not to mention the sheer time!
I am trying to streamline the process is a little by creating a PDF form in which the results can be entered and the form emailed to the other department. I know how to create the form and add a "submit" button which opens up the Outlook client. However, I want to make sure the form cannot be saved by the lab personnel, instead I want to give them the abilty to enter the data and email.Thisis an interim solution until a proper lab management system can be put into place.
What is the best practice around something like this? Any other suggestions or tips will be appreciated.
Thank you.

Can I somehow collect the data in another software such as Excel?
I would still need the PDF form completed and emailed over but if I can collect the data externally, that would be nice.

Does anyone know the best way to create a form that you can do a mail merge with?

I have been asked to create a form that can be used to do a mail merge. At first I thought I could create it in indesign and then pdf the file and do form fields right in the pdf, but I'm not sure if you can do a mail merge with data in an excel file and a pdf file containing form fields.
The other option I know I could use is a Word file and excel, but I don't think the functionality is as good as in a pdf (like addition of percentages, or error messages, radio buttons, etc.). And I do need to be able to do a mail merge. Anybody have any suggestions?

There is not built-in feature for this, but it can be done with scripting. The problem is it can be a bit complicated, and it more complicated to decribe in much detail in a forum posting. It involves creating the base form and making the pages templates. You can export from Excel to a tab delimited text file. You can then either programmatically create a template-based FDF that when loaded into Acrobat populates the PDF form, creating as many individual forms as needed, or using JavaScript in Acrobat to read the data file and generate as many individual forms as needed. Both approaches involve a similar amount of programming, but they're quite different.
You might want to look into this product, which apparently is no longer available but may be come back soon: http://www.debenu.com/products/eol/arts-pdf-variform-lite/

Best way to create a Contact Us form

What is the best way to create a contact us form?
I created mine using a table and the form sleection of DW CS6.
Thanks!
Janelle

Creating the form itself is really only half the job.
You can have a marvelous form created using html and DW's built in form items. Those items can be in a table, or not, that part is up to you. The next step is making the form "do something".
The simplest way to make a form work, is a mailto: link in the form action attribute, but it's the absolute worst way to go. Mailto: links require the viewer to have an email client installed and set up on the computer they're using to submit your form. If they don't (as in the case of Gmail, htomail, yahoo, etc mail users) when they click Submit, absolutely nothing will happen.
Another drawback of using a mailto: link for your form submission is that email address is now open to every spam email harvester on the internet. If you like certain "blue pill emails" then there wouldn't be an issue, but if you are like the majority of society, you won't be sending funds to any Nigerian doctors either and won't want to be spammed constantly.
Personally, I use the Formmail script, available for free at http://www.tectite.com for pretty much all of my html forms. As long as your server has PHP installed (most do) the Formmail script will work very well for you. They have a ton of "How To" info on their site and the script itself is very robust with loads of features you can use, or not, at your discretion. They also have a very well documented troubleshooting section and a searchable forum that take care of the most common issues you run into.
Your next step is "find out what server scripting language you have available on your server". From there, you'll need to find/write a compatible script, then attach your form to it.

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Need help knowing best way to create record

What is the best way to create a new record... I have a form pulling info from about 20 tables. When the user wants to create a new record, I want a new form to open and allow them to select the values based on the foreign key fields so it makes more sense than just random numbers.
The problem I'm having is knowing when and how to insert. Should the "new record" form be it's own database block that inserts from within it. (but then when they go back to the original form they must requery to see the new value.) Or what about copying each field back to the original form. I'm new to forms and would appreciate any insight and tips.

would a wire like this help me?
I doubt it. You want FireWire.
Take look at the Canopus ADVC300. It comes with a nice Macintosh application that works flawlessly with iMovie 06.
http://www.canopus.com/products/ADVC300/index.php
Yes, it does cost more but it works.

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Best way to create pop-up menu's

Hi All,
I have been having a heck of a time doing something that i
would have assumed to be relatively simple - specifically creating
a pup-up menu.
My first set of approach was to dynamically create a movie
clip on a button rollover, and within that movieclip create several
other movie clips that i then assigned actions too. The problem was
that since i applied a action on "rollout" on the initial movie
clip, it became a button, and as such all of the sub
movieclips/buttons became in active (any click was only detected on
the parent).
My second set of attempts have been around the MenuComponent
(see other posts), but here too i have hit problems, initially with
animation and depth. I solved the animation issue, but the depth
problem remains.
Now, i see pop-up menu's everywhere, so i assume that this is
a relatively simple problem - so what am i missing. A google search
showed up lots of examples of how to do using menu that are created
in the UI (rather than purely in AS), using purchased components.
The first case is not an option since i need to create it fully
dynamically, the second would be an option - however i typically
need a far greater level of visual control than off the shelf
components provide (hence i have needed to build up my own class
library for many common tasks).
So after all that, i have a simple question.
"What is the best way to create a dynamic popup menu in
AS2?"
Regards
Neil

I guess you want to make your own popup menu, if I understand
correctly. Nothing simpler, your first attempt was in the right
direction, you just don't assign button actions to the parent clip,
because you won't get the child clips to work, but add another
child at the lowest level inside the parent, that acts as a
"background" clip/button.
And for the rollout for the entire popup, you can add a
transparent clip just under the popup (which is at the currently
topmost depth) covering the entire stage, give it rollover that
acts as your rollout, and make it not use the hand currsor, so you
can't tell it's there.
That's how I do it, anyways..

What is the best way to clone a form field in BC

Hi,
What is the best way to clone a form field in BC. I tried using jquery .clone. It works fine on other forms for me but not on the BC forms, why? is it just me? Any help would be great. Thanks

I mean, duplicate a field with the click of a button.
I think this should work, but it's not and I am linked to the jquery library in the head of my page.
<script type="text/javascript">
$(document).ready(
function() {
    $('input#tmpAddRow').click(
      function($e) {
        $e.preventDefault();
        $('tr#tmp').clone(true).removeAttr('id').appendTo('tbody');
    $('tr input[type=text]').focus(
      function() {
        $(this).addClass('myFocused');
    ).blur(
      function() {
        $(this).removeClass('myFocused');
    </script>
<img alt="" style="border: 0px solid; width: 200px; height: 134px; float: left;" src="/images/pv logo 3d.png" />
<h3 style="text-align: center; color: #0000ff; text-shadow: #999999 0px 1px 5px;">Member Directory Listing</h3>
<p style="text-align: center;">If you would like to be listed in the Pine Valley Middle School Directory, please fill out this form. Only fill out the areas you would like to show up in our Directory.</p>
<div style="margin-left: 130px;" class="form_bg">
<form action="/CustomContentProcess.aspx?CCID=5656&OID={module_oid}&OTYPE={module_otype }" method="post" enctype="multipart/form-data" onsubmit="return checkWholeForm45842(this)" name="catcustomcontentform45842">
    <table cellspacing="0" cellpadding="2" border="0" class="webform">
        <tbody>
            <tr>
                <td id="tmp"><label for="ItemName">First Name</label><br />
                <input type="text" value="{module_firstname}" maxlength="255" id="ItemName" name="ItemName" class="cat_textbox_small" /><br />
                <input type="button" id="tmpAddRow" value="Add a Row" />
                </td>
            </tr>
            <tr>
                <td><label for="CAT_Custom_131512">Last Name</label><br />
                <input type="text" value="{module_lastname}" class="cat_textbox" id="CAT_Custom_131512" name="CAT_Custom_131512" maxlength="1024" /></td>
            </tr>
            <tr>
                <td><label for="CAT_Custom_131509">Number</label><br />
                <input type="text" value="{module_homephone}" class="cat_textbox" id="CAT_Custom_131509" name="CAT_Custom_131509" maxlength="1024" />
                </td>
            </tr>
            <tr>
                <td><label for="CAT_Custom_131510">Email</label><br />
                <input type="text" value="{module_emailaddress}" class="cat_textbox" id="CAT_Custom_131510" name="CAT_Custom_131510" maxlength="1024" /></td>
            </tr>
            <tr>
                <td><label for="ItemAddress">Address</label><br />
                <input type="text" value="{module_homeaddress}" maxlength="500" class="cat_textbox" id="ItemAddress" name="ItemAddress" />
                </td>
            </tr>
            <tr>
                <td><label for="ItemCity">City</label><br />
                <input type="text" value="{module_homecity}" maxlength="255" class="cat_textbox" id="ItemCity" name="ItemCity" /></td>
            </tr>
            <tr>
                <td><label for="ItemState">State</label><br />
                <input type="text" value="{module_homestate}" maxlength="255" class="cat_textbox" id="ItemState" name="ItemState" />
                </td>
            </tr>
            <tr>
                <td><label for="ItemZip">Zipcode/Postcode</label><br />
                <input type="text" value="{module_homezip}" maxlength="255" class="cat_textbox" id="ItemZip" name="ItemZip" /></td>
            </tr>
            <tr>
                <td class="hidden"><label for="FirstName">First Name</label><br />
                <input type="text" value="{module_firstname}" class="cat_textbox" id="FirstName" name="CAT_Custom_131511" maxlength="1024" /></td>
            </tr>
            <tr>
                <td><input type="submit" id="catcustomcontentbutton" value="Submit" class="cat_button" /></td>
            </tr>
        </tbody>
    </table>
    <script type="text/javascript" src="/CatalystScripts/ValidationFunctions.js"></script>
    <script type="text/javascript" src="/CatalystScripts/Java_DatePicker.js"></script>
    <script type="text/javascript">
//<![CDATA[
var submitcount45842 = 0;function checkWholeForm45842(theForm){var why = "";if (theForm.ItemName) why += isEmpty(theForm.ItemName.value, "Item Name");if (theForm.Days) why += isNumericIfVisible(theForm.Days, "days"); if (why != ""){alert(why);return false;}if(submitcount45842 == 0){submitcount45842++;theForm.submit();return false;}else{alert("Form submission is in progress.");return false;}}
//]]>
</script>
    <script type="text/javascript">
    jQuery("#ItemName").blur(function(){
        jQuery("#FirstName").val(jQuery("#ItemName").val());
</script>
</form>
</div>

WHAT IS THE BEST WAY TO CREATE AN XSD FILE (TO BE USED BY SOAP ADAPTER)

Dear friends
I have a simple scenario.
OUTBOUND DATA --> SOAP ADAPTER --> ( XI ) --> RFC ADAPTER --> INBOUND DATA
The XML file that I got from mapping area of IR (Design) is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_NAME_SOURCE xmlns:ns0="http://test3.com">
<FIRSTNAME>DAVE</FIRSTNAME>
<LASTNAME>SMITH</LASTNAME>
</ns0:MT_NAME_SOURCE>
If you notice, there are only 2 fields.
I need to create an XSD file and import it as an external object, which I can use for SOAP Adapter.
Which is the best way to create it.
Also, I need to know if there is any step by step of sending a message from XML SPY. I have downloaded this software, but am not able to undertand how to use this.
Hope to hear from any experts on this forum.
Thanks in advance
Ram

Hi Ram,
See the below blog..
It shows how to send SOAP message using XML Spy.
It also shows how to generate wsdl.
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Regards,
Sumit

What is the best way to create business documents in CRM

Hi All,
What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
Please help.

Ashim,
Try looking at the program:
CRM_TEST_ORDER_MAINTAIN
I think that should help you figure out the parameters.
Good luck,
Stephen

Best way to create slide show with last photo having links

What are some of the best ways to create a slide show (more like a season greeting flash) with the last photo having links and buttons for the viewer to click?
I already have the code for the slide show. What I need now is how do I reference or point to a keyframe that contains the last slide as the background with buttons and hyperlinks? Perhaps, I also need a way to not showing this slide until the last? How do I do that? This last slide with buttons and links are on it's own layer.
The other route would be to create the buttons and hyperlinks in the AS3 code instead of design time. If so, how do I do on the last slide?

What are some of the best ways to create a slide show (more like a season greeting flash) with the last photo having links and buttons for the viewer to click?
I already have the code for the slide show. What I need now is how do I reference or point to a keyframe that contains the last slide as the background with buttons and hyperlinks? Perhaps, I also need a way to not showing this slide until the last? How do I do that? This last slide with buttons and links are on it's own layer.
The other route would be to create the buttons and hyperlinks in the AS3 code instead of design time. If so, how do I do on the last slide?

What is the best way to create a database schema from XML

What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# further

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create CRUD datagrids

What is the best way to create CRUD datagrids that tell CF
components to update sql tables. I find that I'm having to vreate
all these columns with custom properites and its a bit of a chore:
<mx:DataGridColumn id = "NatWest" dataField="NatWest"
headerText="NatWest" editable="false"
wordWrap="true"
textAlign="right"
headerStyleName="centered"
labelFunction="price_labelFuncNatWest"
sortCompareFunction="price_sortCompareFunc">
I don't really want to use any wizards as I want control over
my code.

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create a read more/collapse text box on the homepage of a site?

What is the best way to create a read more/collapse text box on the homepage of a site?

I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

Best way to create Contact form in WPC.

Similar Messages

Maybe you are looking for