Best way to Encode 3 short SD clips for DVD

Im compressing three graphic, video, and audio heavy clips (7-12 minutes each) to put on DVD. I moved them from FCP to COMPRESSOR and am using the standard high quality 90 min. DVD encoding settings.. (bit rate between 6.1 and 7, high quality, two pass encode).. Im assuming this will be sufficient..
Does anyone have an even better way to encode these?
Thanks

Audio - AIFF from FCP or Dolby 2.0 from compressor? (and why?)
ac3 dolby from Compressor, primarily because uncompressed Aiff takes much more space while ac3 is compressed keeping quality very good and ideal for DVDs. There are are also reports of some Aiff audio hiccups occurring with a number of DVD players.
can you review the practical difference between CBR & VBR?....
CBR means that bit rate is assigned evenly according to your bit rate choice regardless of scenes, effects,transitions that require higher or lower bit rate. VBR allows you to set an average and maximum bit rate and a two- pass is even better because the video is first explored/analised then bit rate is assigned more intelligently.
In your case I think you'll be fine with CBR.
G.

Similar Messages

  • What's the best way to master an MPEG 2 file for DVD Studio Pro.

    In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
    Peter
    PS - I'm using FCP 5

    Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
    http://www3.telus.net/bonsai/Step-by-Step.html

  • Any free way to encode 5.1 audio track for DVD?

    Besides the limited 3-use SurCode for Dolby Digital that comes with Premiere, is there any free way to encode or convert a 5.1 PCM WAV file to a surround format for DVD?
    Thanks!

    I can't find the post, but I saved it...Here it is:
    Like most of you, I was annoyed to find out I couldn't create AC3 surround sound files with my CS4 software, and also that we got downgraded from Audition to Soundbooth. We all paid a lot for it! I know many people have ranted about that already, so enough said.
    Here is a workflow that gets around that problem without ponying up for the SurCode Plug-in, and/or buying Audition!
    To convert your mixed 5.1 audio, or stereo audio, to the DVD standard AC3 file that Encore wants, download the latest version of Audacity here:http://audacity.sourceforge.net/  It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems.  If you don't know already, it's free!
    Now, before I start getting flamed, about Audacity, it works great!  The UI is not the most modern, but the quality is top-notch.  I've used it for years and most complaints about it are unjustified.
    You'll need to download the latest version: "Beta: 1.3x - for advanced users."  There will soon, I hope, be an Audacity 2.0 stable release. Until then, use the Beta release for this workflow.
    Note:  I'll focus on Premiere Pro CS4, because that is where I originally troubleshooted this, but something similar will work for the other Adobe products that use sound.
    Workflow:
    Create your mixed 5.1 surround sound audio in Premiere, and output the audio only by going to File > Export > Media, and selecting "Windows Waveform" as the output.  You should only have "Export Audio" checked.  Verify the format in the Summary section. You should see something like: 48000 Hz, 5.1 Surround, 16 bit.  Now under Audio codec, make sure "Uncompressed" is selected.  Click Okay, and Adobe Media Encoder should launch.  Click "Start Queue" and your audio file will be created.  You'll get an interleaved 6 channel wave file.  Not all applications will open it, but Audacity will.
    Note:  When you mix your surround sound in the Audio Mixer, you'll place your little "Puck" where you want the sound to come from.  Picture yourself in the middle of the "dish," if it's a puck, isn't it in a rink, as in hockey rink...ah, but I digress.  Anyway, you'll notice that volume meters in the 5.1 (6 channel) Master section are laid out in the following order: L,R,LS,RS,C,LFE.  Also, if you open a 5.1 audio file in the Source panel, you'll see the same order from top to bottom: L,R,LS,RS,C,LFE.   Soundbooth also does it that way.  Ahh....Adobe...nice try.
    The actual channel order should be L,R,C,LFE,LS,RS.  That's the order that you'll probably have to assign in the "Audio Output Mapping" section in the properties menu to get your channels to play correctly with your surround sound hardware. L,R,C,LFE,LS,RS is also the order that interleaved files use.  So after you create your 5.1 file, and open it in another audio program that displays them in the "proper" order, like Audacity, you'll see your tracks laid out from top to bottom in that order.  I'm not sure why Adobe does it that way, but oh well.
    Surround sound primer:
    The LFE channel is not, despite popular misconception, a subwoofer channel.  Bass from all the channels in a surround sound Amplifier is summed and sent out to the Subwoofer.  The LFE channel is supposed to be used only for very low frequencies, to create extra  ...oomph.  I think that is the technical term.  It is not supposed to be used for bass frequencies from the other tracks.  It is for explosions, dinosaur footsteps, ...etc.
    Audacity will open DVD ".vob" files, and even let you select which stream (usually Language) to open.  As an example, open up a movie with some action in it like Ironman (The movie starts at "VTS_03_1.vob") and look at the LFE channel.  It's the 4th track from the top in Audacity.  You'll see it's silent except at parts where there is thumping AC/DC music at the Intro, or explosions.  It's not used as a subwoofer channel!  
    With that in mind, you may have noticed, unless I'm missing something, that there is no way in the Premiere Mixer to assign an audio track only to the LFE channel.  Sure, you can dial up the "Bass Clef" knob to 0.00 db, and send a mono channel's audio to the LFE channel, but there is no place to put the "Puck" that only outputs to LFE.  There is one for the center channel, but without someplace to put it, your 40 Hz dinosaur footprint "Thump" is going to also be assigned to some of the other channels.  Which channels depends on your "Puck" placement.  This is not correct.  Again, unless I'm missing something, Adobe needs to correct this oversight.  We'll get back to this problem with a solution later, but first let's continue with the AC3 issue.
    At this point you should have your wave file.  If you want to apply any global changes to all 6 channels, you can open it in Adobe Soundbooth and trim the beginning or end, and apply effects to the entire file.  You cannot, however, make changes to individual channels.  Audacity will!  We'll get to that later.
    Encode with Audacity:
    Install the software and go to Edit > Preferences > Libraries, and click on "Download" for the "FFmpeg Library."  This is the library that Audacity will use to create the .AC3 file.  Once installed, the library version should show up next to "FFmpeg Library Version" While the "Audacity Preferences" window is still open, select "Import/Export" and select "Use Custom Mix", this is used to export a 5.1 channel file.  Now you're ready to open your .wave file from Premiere.  Drag and drop it in the Audacity workspace and you should see 6 mono tracks laid out from top to bottom in the following order: L,R,C,LFE,LS,RS.  Audacity will let you edit the individual tracks, unlike Soundbooth, thanks Adobe.  But for now, we'll keep it simple.  Set your "Project Rate" in audacity in the lower-left corner to what you want the AC3 file to be.  For DVD, chose 48000 (Hz).  If you leave it at 44100 (Hz) Encore won't import it.
    Your almost done.  Now let's export the file.  Go to Files > Export... > and select "AC3 Files (FFmpeg)" in the "Save as type:" drop-down.  Click the "Options..." button and set the "Bit Rate:" for your file.  For 5.1 AC3 audio, probably 448.  Now enter a file name and click "Save."  This will open the "Advanced Mixing Options" window.  This allows you to re-map the tracks to a different channel order.  It should be correct, and it should show "Output Channels:" set to 6.  Press "OK" and you're done.
    Presto, you have a 5.1 channel AC3 file.  Use that in Encore, or whatever DVD creation program you use, and when you play your DVD you'll have full 5.1 audio coming out your surround sound Amplifier.  That is if you have one.
    Test your file:
    If you want to test your file, you can do a couple of things.  Since Soundbooth and Adobe  Bridge won't even open AC3 files, and Encore will open but only play the Left and Right channels in the preview, you'll have to either import the file into Premiere, or use another media player.
    If you got Premiere to play your surround properly, then you can drag and drop the file into the "Project" panel and preview it from there. You will hear all 6 channels in the correct speakers, but I did notice that the quality is not very good.  Maybe Premiere doesn't decode AC3 all that well.  I heard some crackle that isn't in the file.  How do I know it isn't just a bad encoding job by Audacity?  Because I played the file with the VLC media player, and Cyberlink PowerDVD on the same computer, and also on a DVD in my home theater system with no artifacts.  Maybe Premiere doesn't decode AC3 files well.
    The VLC player, will play almost any file in the known universe, and at least on my computer, it automatically played the AC3 surround file, created by Audacity, with all the channels mapped correctly.  That's right, full surround out my speakers with only default settings.  It's a great player.  Get it for free here: http://www.videolan.org/
    Test with Encore:
    So far so good. Now open Encore, drop the AC3 file in an empty project, throw it on a Timeline and build the project without Video,  It will autoplay without a menu this way. If you set the End-Action to the same AC3 file it will repeat continuously.  Either burn this to DVD-RW and test it in your DVD player, or better yet, Build the project to a DVD Image instead, and mount it in a virtual DVD   Drive with a program like "Virtual CloneDrive."
    If you don't know what that is, or how to do it, it is very simple.  Go to:http://www.slysoft.com/en/ and download "Virtual Clonedrive."  It is free.  It tricks your operating system into thinking you have another physical DVD drive.  In fact, it can create up to 8 virtual drives.  Now you don't have to waste time burning, and erasing DVD's every time you make a change to a project.  You can build your project as a DVD Image from Encore, save the .iso file to your Desktop and "mount" it (load it) in Virtual Clonedrive.  You're computer will now think you loaded a DVD into a physical drive, and launch whatever DVD player you have installed.  Mine launches "Cyberlink PowerDVD" which plays the AC3 audio-only DVD in full surround sound on my computer.
    Building and testing projects this way will save you endless hours.  If you need to make a quick change, just "Unmount" the .iso in Virtual Clonedrive, rebuild your project to the same filename, and "Mount" it again.  Instant testing!
    Now, as promised, back to that LFE Channel problem with Premiere that I mentioned:
    Audacity will let you modify the individual channels in your interleaved 6-Channel file. So don't put anything in that channel in your Premiere mixer. Leave the "Bass Clef" knobs at full CCW position ( -00 db ).  The bass from the other channels will go to your subwoofer automatically in your Amplifier.
    Now if you have some low frequency effects files, open them in Audacity.  You can open multiple instances of Audacity at the same time by going to "File > New."  Then, copy and paste them into the LFE Track at the correct point.
    Audacity newbie Hint:  Audacity doesn't yet have a "Mix-Paste" function, so to avoid altering the track length as you paste in your clips, do the following: Select the LFE track by clicking on it's info area.  The info area should say something like "Mono, 48000Hz"  Then press "Delete," That will remove everything from the track.  Now copy and paste your clips into the track by clicking once with the "Selection Tool" where you want the clip to start, and selecting "Edit > Paste."  If you need to fine tune the position of the pasted clip, use the "Time Shift Tool" to move it left or right.  If you work from left to right, then you won't push clips over when you paste new ones in.
    There is another way to do this by opening up new tracks, using the "Mix and Render" function, and re-ordering the tracks to maintain the L,R,C,LFE,LS,RS channel order. But that's for advanced users.

  • The best way to create a 5.1 AC3 for DVD from "normal" music?

    I tried several settings to create a AC3 from my 5.1 music but I don´t know which is the best?
    I have mixed my music in logic as 5.1 surround and when I have created a dvd I think that the sound is quiet different than the mix in the studio. I think that the center is not as loud as it should be!?!
    Regards
    Frank

    I've been reading lots of posts on here already, and just to clarify - my front left and right levels are where I expected. The only audio levels that are lower are the center channel and the surrounds - not the overall audio level, as has been a common problem. I have already tried setting dialog normalization to -31 and turning off compression... any other options?
    Again, thanks!
    Dan

  • Best way to encode Quicktime file for the web?

    Hello all and thanks in advance for your help with this problem.
    I need to know the best way to encode a quicktime clip for the web.
    This was my first try:
    http://www.denmothers.net/trailer-big.htm
    It works fine in safari, firefox, and ie for mac, provided they have quicktime 6 or later but it seems not to work on pc browsers. The file is encoded as an .mp4 using compressor and played with the browser's quicktime plugin. I've read that encoding files as a .mov provides greater compatibility but when i compress it as a .mov using the mpeg4 codec the file sizes are huge and when i use the photo-jpeg codec the quality is poor. h.264 looks great and has low file sizes but then my viewers have to have quicktime 7 which i think is too limiting because many will have older computers.
    How should I encode my file such that it works best across browsers and platforms and has the highest quality at the lowest size?
    Best,
    Keegan

    If you open an .mp4 file in quicktime pro you can then select File->Save-As and you are presented with two options:
    Save as self-contained: This will create a .mov that is the same size as your .mp4 but is playable on any system w/ QuickTime 6 and the Mpeg-4 codec. (PC's included).
    Save as reference: This will create a small (>500kb) file that will simply reference the .mp4. If they're in the same folder the .mov created will open the .mp4. Without the .mp4 the .mov in this case is useless.
    For what you're trying to do I suggest going with self-contained.

  • What is the best way to record a video(not big) for free on a mac w/isight?

    What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
    Thanks.

    Hi Carolyn,
    you can use iMovie to record a video for free on a Mac with iSight.
    1. Open iMovie HD
    2. Choose “Create a new project”
    3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
    4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
    5. Press “Record with iSight” in the main picture window.
    6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
    7. You are done!
    iMac G5 PPC 2,1 Ghz   Mac OS X (10.4.8)  

  • Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    format flash drive in Exfat for transferring files between Mac and Pc.
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • What is the best way to set up an external drive for video storage

    What is the best way to set up an external drive for video storage?

    Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
    FAT32 and NTFS formatting will not work with iMovie.
    If necessary, you can reformat using Disk Utility.
    Make one large partition. No need for multiple partitions.
    Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

  • Best way to set up two new iTouches for kids

    I have a two new iTouches for my daughter (8) and son (5). My iPhone is set up with iTunes on my iMac computer. Both kids have an a user account on the iMac. What is the best way to set up the iTouch's for my kids?
    Do I use my Apple ID for their iTouch and sync it to iTunes on my iMac user account (same as my iPhone)?
    Do I use my Apple ID for their iTouch and set up iTunes on their user accounts on my iMac?
    Do I get my kids their own Apple ID and sync it to iTunes on my iMac user account?
    Do I get my kids their own Apple ID and sync it to iTunes on their user accounts on my iMac?
    Do I set up one Apple ID for both kids and sync to iTunes so they can have the same games and only pay once?
    I also have an iPad that I sync to iTunes on my usser account.
    Thanks

    I have the same dliemma. Daughter 8, son 6 - 2 new itouches for xmas - one library , my iPad, wife's iPhone ??
    I was intending on just keeping one library (this does contain music with explicit lyric content etc) and manage their music via separate playlists.
    As far as accounts and restrictions go, I was going to set them up with their own itunes account (using mail addresses only I can use). Load the account up with a voucher each.
    The restrictions I was going to apply at the iPod (rather than the account) using a PIN I know - this way you can limit Safarii browsing (i.e. turn it off), youtube, and the age limit to the apps they can install and run - and the movie ratings allowed etc.
    Happy to hear other ideas though - I'm intending on setting this up BEFORE they get them.

  • What is the best way to make a list of addresses for envelopes or labels?  Address book, numbers or pages?

    What is the best way to make a list of addresses for envelopes and labels?  Address book, Pages or Numbers?

    I liek your idea of having multiple images in a grid. I think
    that would be the best bet as you mentioned. Having one big picture
    would be hard to distinguish the sub-areas with mouse coordinates.
    I think checking the coordinates for the mouse would be very
    tedious because I would have to check for the left boundary, the
    right, top, and bottom for each sub-area!
    What do you mean by using button components and reskinning.
    Is this simply using buttons and changing the way they look? I'm
    just trying to save time and memory, because if I had a 10 by 10
    grid, thats a hundred buttons. Wouldn't that slow down the machine
    alot? And for that matter wouldn't having a grid of 10 by 10 images
    also by the same deal?
    Thanks for the input, I'm just trying to find the most
    efficient way to do it.

  • Best Way to setup a disaster Recovery site for a logical standby database

    I have a logical standby DB (L1DB) as a reporting db on the same machine as the primary (P1DB). We are planning on building a disaster recovery site with similar hardware and potentially have disk mirroring of atleast the redo log files.
    The DR site can hold an additional physical standby (S1DB) for the primary (P1DB). I am trying to understand what would be the best way to setup the Disaster Recovery site for the L1DB logical stdby. Ideally, when the disaster happens, and I no longer have P1DB and L1DB, I should be able to switch to S1DB as the new primary. But how do I setup to have a L2DB that takes the place of L1DB and has its contents and can be setup as a logical standby of S1DB?

    If you already setup one logical standby, then you know how it works, so not sure what question you are asking ?
    Personally I would setup L2DB as a standby of the original primary P1DB. Having downstream standby databases complicates things, and adds additional lag between primary transaction time and L2DB apply.

  • I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

    I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?  The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
    Any help is greatly appreciated.

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • HT5361 Best way to track history of version releases for Apple Mail.app?

    Best way to track history of version releases for Apple Mail.app?
    A great many of the traditional OSX installtion history items are no longer available in 10.8  One can no longer consult the installation history of the "Software Update" preference pane, because that functionality has moved to the Mac App Store utility.  The Systems Information Utility does indeed show *some* installation history, but it does NOT include the Mail.app, for some reason.  Fianlly, I can't find a web posting where apple at least provides the list of all recent software updates for mail.
    Any suggestions?
    Thanks!

    UPDATE:
    I have partially answered my own question. I found that if go to the History window for the selected file, then double-click the "version" (indicated by the label, which is actually displayed in the "comment" field), it opens the file in html. But, there is a "save as" button in this preview window. If I save the file to a temporary location and optionally, give it a different file name (e.g., to indicate the rev #), I can then go to Windows Explorer, double-click the file, which then launches in a browser window and displays the formatted web file. So this will definately suit my purposes from a audit perspective.
    However, I still would like to understand how the tags, branches, and pinning works because that might be a better way?
    -Kristen

  • Best way to make a short movie that can play back and forth smooth?

    Hi!
    I have a short .flv clip (video) of a shoe rotating 360 degrees.
    The clip is less then 4 seconds and about 320kb in size and I'm using flash CS4.
    I'm trying to build some sort of a player that lets the user scrub through the movie (back and forth).
    The player is also supposed to be able to play the clip back or forth at a speed selected by the user.
    I have read kglad's reply about "How to play backwards flv imported in timeline on flash cs3?", and the code works perfect, except that the video is not playing smooth when played backwards. I guess when playing normal, the next frames are by default buffered, but when playing backwards they are not...
    Which is the best way of doing this?.
    Maybe it has already been done? Has anyone heard about something similar?
    Thanks in advance!

    Hi!
    Please find the file attached. I changed the file extension from .fla to .eps.
    (I also added one with the extension .mpg)
    Basically I just want to be able to rotate the shoe in either direction,
    but then I also would like the user to be able to "spin" it.
    Meaning that when the user turns the shoe around, the speed is recorded,
    and when he releases the mousebutton, the shoe will continue to rotate at that speed.
    Do you think it could work using video? Or do I have to use stillimages instead?
    Your script worked, but the film doesn't playback smoothly..
    Thanks in advance!

  • What is the best way to encode and compress?

    I just finished an hour and a half long video of comedians performing. The client wants this to be put on dvd so he can mass produce it. What is the best way to compress this and encode it? Should I buy compressor or can I do it in handbrake? What are the best best settings to make sure it doesnt lose quality? Please advise...

    You should be able to get up to 2 hours at least.
    The best way is to export as a Master File and drop it into iDVD, Toast or some other DVD authoring app.

Maybe you are looking for