Best way to roll back to 5.01?

Hi,
Since updating to 5.02, PPCS5 on W7 throws up errors when capturing from a Canon XM2. Had no problems with 5.01. And, don't have a problem using PE8 - in fact I have to use PE8 to capture because PPCS5 refuses to play ball.
So, what's the simplest way to roll back a version? Bearing in mind I have the Master Collection installed.
Cheers

Yeah, going back to 5.01 is probably not the right way to go. I agree that finding the problem is probably the right way to go about this.
Try the standard stuff:
trash prefs,
upgrade graphics driver
clean media cache
If that doesn't work, here's what I would do.
I would launch the uninstaller for Master Collection and then I would uninstall/reinstall JUST Premiere Pro. Once you do that, then run the updater to get Premiere Pro back to 5.02 and see how things go. Failing that, then I would contact tech support and this forum for additional suggestions.
Hope this helps,
Dennis

Similar Messages

HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526

Is there a way to roll back ios6? I upgraded before I knew about the new mapping. I used google maps all the time and absolutely hate the new one. Just about everything I've looked for is wrong or missing.

I hate the mapping in IOS6. Is there a way to roll back to the older OS? When I upgraded I didn't know about the mapping change. I used google maps a lot, for a variety of things. In just a few searches I've found more errors or missing landmarks than anything else. I really hate this app!

I agree. How can I roll back to the previous OS? Developers, please post a procedure for reverting.

Desperate for easy way to roll back 5.1 firmware to a previous version?

The company I work for uses a proprietary iPod Touch app for data management. I have a 3rd gen iPod Touch that I updated to firmware 5.1. I don't think many people in the company keep up with firmware updates like I do. However that may now be to their advantage because we had an app software update about the time the firmware update happened and my app no longer works like it should - I am one of very few employees, nation wide, that has this problem. I think it has to do with an incompatability of the app software and the 5.1 firmware. I really need to be able to use the app to it's fullest capacity. Its been weeks and the company hasn't fixed the problem so I'm seeking answers of my own.
Is there a simple way to roll back the firmwareto 5.0 or before the cloud software came out (I don't know what version that would be)??? or is it permanent?
I use a Microsoft based notebook for my iPod/iTunes managment so answers gear to a Mac won't necessarily make sense to me.
Thank you!!

"apple" doesnt support downgrade of any software..but there are other ways to do it..u know wat i mean rite

Proper Way To Roll Back CF Update

I've recently installed CF security APSB12-06. Doing so has somehow or another broke all of my web apps and their session functionality...I need to roll back this security update. The installation instructions had me back up the files that I was replacing/updating, and I still have these files/folders available.
So, I was wondering: what is the proper way to roll back a CF update or security fix? From what I understand, I can remove the .jar file in {ColdFusion-Home}/lib/updates, and then replace my CFIDE and WEB-INF folders with my backup versions. I was wondering if there was anything else I needed to do.
Any information would be greatly appreciated!

Carl,
I believe that there was a jar file in the ColdFusion\lib\updates folder, which I deleted when I installed the APSB12-06 update. I cannot entirely recall, but I think it was a jar file ending in -00004.jar, as is the format for the updates, indicating which series of updates you have installed on your computer (at least that's what I take from it...). Can you advise what I should I do if there was a jar file in there previously? In hindsight, I probably should have backed this file up as well...
Thank you for your help!

What is the best way to auto back up from a pc to time capsule?

IN MY HOUSE WE HAVE ONE MAC AND THREE WINDOWS PCS/LAPTOPS. I AM LOOKING FOR THE BEST WAY TO AUTOMATICALLY BACK UP THE PCs TO THE TIME CAPSULE.

windows 7 will not back up to a time capsule. because windows backup demands ntfs, and time capsules aren't true nas devices (they don't include the ability to fool windows into thinking its an ntfs partition)
i thnk your going to need another back up utility for your windows computers, like maybe acronis or paragon or rdrive, etc etc
theres nothing stopping you from copying files back and forth from a windows computer to a time capsule, but when it comes to windows backup it won't work

Hi, Please help. I accidentally deleted my entire Iphoto Library. I used Stellar Phoenix 4.1 and I do believe that I recovered all. I recovered to "My Passport" for Mac External HD. Files are all mixed up, best way to import back?

Hi, a couple days ago, I was orgainizing my Iphoto libray. Then, I thought that I was emptying my trash on Iphoto. (the ones I deleted when orgainizing) after hitting are you sure button, I realized that it was 209 files with 18,000+ photos. So I frantically stopped iphoto from "saving critical information" thinking If I left it open I could copy all my files over to (I beleive somewhere in finder under pictures?) I thought, but it most have been under the applications folder. Well this is where I really messed up. So after saving every file to that section, and everything was normal again on iphoto, I decided to make space and delete them from where I put them. So instead of selecting each file indivually, I used the select ALL button. Only to find that it deleted EVERYTHING. Iphoto (the file) was apparently at the bottom of the page along with Nikon Transfer, Lightroom 2 and god knows what else. That is when I found a data recovery software program (Stellar Phoenix 4.1mac) 17 hours later it found 159GB. I read enough to know that I HAD to go and buy an external HD. (even though I already own Time Capsule, but I never hooked it up ) was confused about if I could actually use that for this matter so, I just went and bought My Passport an external HD for Mac. Plugged it in, and recovered what looks like all my files (hopefully) did also read enough that I knew NOT to use my computer after this occured.
Now that you all know how I got into this mess, I would like to know the best way to import the files back? Ok I know this sounds easy, but all the files are scattered everywhere on the HD. Is there a way to put them back on my Mac Book Pro that would possibly put them in some kind of order? Date? Image file number? Anything? 18,000 photos to reorgainze is going to be brutal. I can reinstall Lightroom 2, if i can locate where I put the disk. And I also have CS5. Also wondering if the quality of the photo was affected? I did get them back, so I am not complaining but any assistance would be greatly appreciated!
Will be turning on Time Machine and hooking up Time Capsule as well. Should I also use my new HD along with capsule? Any advice on that matter would also be greatly appreciated as well!!!!!
Thanks, Michelle

There is an iPhoto community forum if you are at all interested:
https://discussions.apple.com/community/ilife/iphoto

What is the best way to match back 3rd party vendor data to our SQL Server Database?

So we have this 3rd party data that we need to match back to our database. We have determined that the "ID" column that the 3rd party is sending us back data is a concatenated key of our member's SSN, Gender, and CCYYMMDD Birthdate. In 90% of the
cases, we can match back on this. However, the other 10% we have to try a couple of different ways...using our Member #, using what is called a HFCA #.
We are talking about 10s and 20s of data here...NOT thousands.
What is the best way to handle this via SSIS? A SQL Server Stored Procedure to cursor through the 3rd party data or multiple INSERT-SELECT statements trying to marry back the data? My thought process was to cursor through each record, try and match on our
90% match, and then determine if we have a match or not, and then if we do not, then try our other means. Should I SELECT 1 to see which matching criteria to go with? So in other words, for the first match...
IF EXISTS(SELECT 1 FROM TableName WHERE ColumnName1 = .....) BEGIN....ELSE...Blah Blah Blah
or simply continue doing INSERT-SELECTS...
I guess I am asking about the efficiency of using a cursor within a SQL Server Stored Procedure here.
Thanks for your review and am hopeful for a reply.

You are asking a SSIS question but posted in tsql - which is it? But before you go further, which matching logic should have priority? Member # or the SSN/gender/birthdate? Note that the priority does not depend on matching success percentage.
In other words, you may prefer to match on member # first (even though it has a lower success ratio but a higher confidence ratio), followed by ssn..., followed by whatever.
In any case, this sounds much more like a SSIS logic issue. Your questions regarding cursors and stored procedures seem premature at this point. OTOH it may depend on what you are actually trying to accomplish.

I updated my firefox yesterday and am now regretting that desicion. The new version is painfully slow and scrolling is even worse. Is there any way to roll back to my previous version?? Please help

All pages are very slow to load. Ebay is among the worst. The scolling is choppy at best, and all check boxes and expandable fields just show up blank. Desperately need to roll back the upgrade.

I'm having a similar problem. Something I've noticed is that the page doesn't seem to advance to whatever I've clicked on without me moving the cursor. I have no idea why that would make a difference.

Is there any possible way to roll back version 5 of Firefox? cause v6 kinda slows my system, and sometimes ends up freezing.

Don't ask anymore questions about my add-ons, or whatever stuffs. I just want to know how can I roll back to the older version, PEROD.

Unfortunately your suggestions didn't help me, although I really do appreciate your efforts. Finally I found a solution myself, thanks to the internet: it appears to be a problem, caused by Adobe's Flash Player The solution is described in this video, including the corresponding links to download a new flash player. It works fine for me: I installed it last saturday and not any strange behaviour so far: my G5 PowerPC quad with OSX 10.5.8 yet can view all kinds of videos and websites 'like in the earlier days' and so far no annoying pop ups ;-)
http://www.youtube.com/watch?v=iCrAKhv3R_c

Best way to pass back data from hierarchical table view?

Hi,
I have a view hierarchy using a navigation controller that's working pretty well. One of the bottom level views is a table view where the user selects an item from the list. This bottom view checks the list item, saves the selected item in a property, and then pops the view off the stack.
What's the best way to alert the parent view that the child view has been popped off so it can retrieve the value in the property? The calling push returns immediately, so it doesn't appear to be a modal call. I want to be able to use the same controller from other parent forms, so I need to be able to do this without referencing the parent in the child form ideally.
Thanks
Ray

Hi, well let me try to explain it a bit more
- Add a "delegate" property to your child-viewcontroller-class
- Define a protocoll within each chil-viewController-class
In this example let us name it "didSelectValue:(NSString *)value"
- In the parent-viewcontroller before pushing a child-viewcontroller set it's delegate property to "self" (parent-viewcontroller)
- In the parent-viewcontroller implement to protocoll-method "didSelectValue:(NSTring *)value"
- In the child view-controller in (assuming it is a tableViewcontroller) add some code in didSelectRowAtIndexPath that checks if the delegate is set and check if it responds to selector "didSelectValue:(NSString *)value". If so, call it with the selected value.

Is there any way to roll back the version of the back-up so I can restore it to my new one?

I got a 2nd hand iPhone and put same name on it as my old one so it sync'd to the new one; I want to get an earlier back-up version of my iTunes because I mistakenly put my old phone's name on the new one. Now all of my contacts and everything else is gone any ideas on how to roll-back?

Everything worked fine before the update and nothing on the car has changed. I unpaired and repaired and now I get the message on my car that says "Feature not supported on the current phone" The reason I chose this vehicle and phone were because I really needed that feature due to being a real estate broker on the road all the time. I didn't ask for the update and I want it back to the old OS. I'm also having issues now with battery life, WiFi, and bluetooth. This is totally unacceptable and if I have to change phones I will definitely be changing carriers on all 3 lines I have. Please advise.

Is there ANY WAY to roll back the firmware to a pr...

I don't care if it's risky or complicated. I want to roll back to 6.94.

if you want to fool around with your device you void warrant and nokia wont touch it should you have issues further down the road you could take it to a nokia care centre and get it reflashed and ask them to install the last version rather than the new one but its always adviseable to have the latest frimware installed for better performance so its up to you from here what to do next
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Is there way to roll back to a previous version of Muse CC?

I have been unable to publish site changes for over a week. This followed my upgrade to current version of Muse. This is my company's website and I am desperate for a workaround to publish asap because of a critical contractual deadline. Is it possible to roll back to a previous version of Muse CC so that I can test to see if I can regain the ability to publish?
Two business cases were opened last week based on chats and one adobe connect session with agents regarding the publishing problem (which presents as a server error during image upload): 0185081557 and 0185082238. (0185081557 is still open pending Adobe response but 0185082238 was withdrawn by Adobe this morning, with a statment that I had not responded as required, which is incorrect because this case left off with my sending the Muse file for analysis with Engineers last week and being told that it would be 24-48 hours before I received a response & 48 business hours would be today. I had also placed a followup update confirming that I cannot even re-publish the version of the site that is currently posted.
Please help! I really need a workaround!

Thank you - I have received that email and am working to implement the changes now and I will send results asap.
It is probably worth noting that files with shorter names also came up as errors and all the files with shutterstock names all previously published to the site. Also, I did try clicking resume, and the errors just kept occuring.
Sent from my iPad

Is there a way to roll back the 725 update?

I have the IdeaPad K1 and I guess I got an early version that had stock Honeycomb. Netflix was not preinstalled but I was able to download it from the Lenovo appstore no problem.
Well this morning Lenovo pushes an update to my tablet and now my stock Honeycomb has some horrible overlay. The Standard Honeycomb icons for back, home and recent apps have been replaced with ugly white icons and I have a stupid chat bubble icon in the bottom center that opens a favorite apps wheel. Not only is this wheel unessecary, the chat bubble icon doesn't even make any sense and is ugly and obtrusive.
I don't want any of this crap. I want my old tablet back. I want stock Honecomb back. I'm assuming they flashed the bios with this update because performing a factory restore just takes me back to this new operating system.
Is there anyway to roll back to the system before this horrible update? I want the tablet I bought not this junk.

I wish I could revert back as well, the theme is an eyesore. I rarely use my k1 for that reason. I still keep it hoping that the next update will fix it.
I will probably sell it if they don't update soon, its a shame, its a well built device, that lenovo had to go and ruin

Best way to roll back to 5.01?

Similar Messages

Maybe you are looking for