Best way to set up a second monitor with a Touchsmart

What's the best way to set up a second monitor for the Touchsmart IQ506? Is a USB to VGA cable the only way and how well does that work (I've read that they can be buggy)?
Are they any recommendations for products and setting it up?

Leopard wont be out befor the second half of this year, sofar i cannot tell you what options you are going to have with the new system. Seems like with time machine is going to be a perfect backup for your whole system.
10.4.x:
Software RAID you can do 0 -1:
To setup a RAID of your system you have to format the drive and setup the RAID type you want from the disk utility.
To have some security i suggest the "mirror" options but you are going to lose some perfomance, depending you want is your main job it mighn't be noticed.
RAID 5:
This would be the nicest option but you need to buy an additional RAID controller. This is mostly used on servers and not on client computers.

Similar Messages

HT3819 what is the best way to set up my childs iphone with apple id and as part of home sharing?

what is the best way to set up my childs iphone with apple id and as part of home sharing?

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

Best way to have an iMac second monitor and Thunderbolt daisy chain?

I'm getting new iMacs for my school lab & wish to daisy chain with Thunderbolt cables into pods of 6 for backing up. I also want to run a second monitor with each iMac. What is the best way to do this since both Thunderbolt ports will be used? USB 3.0 to HDMI?

Canadian Tech Teacher wrote:
By "pods" I had meant creating little LAN's of 6 computers connected to a Thunderbolt drive but I've been doing a lot of reading and now I'm wondering about whether that can actually be done?
The only Mac to Mac connections that Thunderbolt supports that I know of are target disk mode & target display mode, neither of which supports a daisy chain topology or is suitable for a multi-host LAN. (Only one Mac can be the host in either of these modes.)
However, if you want to crete six computer LANs for backups, you could use traditional Ethernet or WiFi LANs & (for instance) a large NAS drive array, or Airport Extreme Base Stations with one or more USB drives attached to them. You could also use Time Capsules, but that is more expensive than going with AEBS's & attached drives. Obviously, wired LAN's would be more suitable for multiple "pods" of six Macs, both because of better reliability & elimination of WiFi channel contention that would show down wireless throughput.
Of course, this isn't as fast as a Thunderbolt drive connected directly to a Mac, but the only way I know of to do that is by connecting to one Mac at a time, which probably would negate any backup copying speed advantage.
Thunderbolt drives (& cables) are expensive so their use is really only justified where very high speed data transfers are necessary. If you don't need that, you might consider a simpler solution of one (or for redundancy two) USB 3.0 drives per iMac, since they are relatively cheap & still offer high speed data transfers.

Best way to set up a second/family iPad?

I am using a new Air2 as my main iPad and now want to setup my iPad2 as a general usage iPad that anyone in my house can use for things like surfing the web and viewing a baby monitor, etc.
I'm trying to figure out the best way to set it up, I'm not sure if I need to synch over my safari tabs, pages, numbers, etc. Can anyone give me any advice with regards to doing something like this?
If I want to keep everything separate from my current iCloud account, do I just register a new iCloud account or should I use my current account and only synch over certain things? Any pros/cons of doing this either way?
Thanks in advance!

I am using a new Air2 as my main iPad and now want to setup my iPad2 as a general usage iPad that anyone in my house can use for things like surfing the web and viewing a baby monitor, etc.
I'm trying to figure out the best way to set it up, I'm not sure if I need to synch over my safari tabs, pages, numbers, etc. Can anyone give me any advice with regards to doing something like this?
If I want to keep everything separate from my current iCloud account, do I just register a new iCloud account or should I use my current account and only synch over certain things? Any pros/cons of doing this either way?
Thanks in advance!

Best way to set up a new system with RAID?

I'll be buying a new Intel Mac Pro when Leopard comes out (for my office). I can get it with as many drives as fits into the bays (4?). My question is, what's the best way to set up a disk redundancy? I'm assuming I want one of the drives for Time Machine. That leaves 3; what kind of RAID do I want to maximize safety if and when one of the drives dies? I'd also like to optimize disk access time, as a secondary consideration. So, 1) what RAID do I want and how many drives will that take, and 2) how do I set it up? Presumably the thing will arrive all set up with Leopard installed. So, will I have to hose that installation to change the file system to RAID? Any problem with that (is it worth it)? If so, what disk do I boot from to set that up, and what's the right way to do this and get a working system back?
Mike

Leopard wont be out befor the second half of this year, sofar i cannot tell you what options you are going to have with the new system. Seems like with time machine is going to be a perfect backup for your whole system.
10.4.x:
Software RAID you can do 0 -1:
To setup a RAID of your system you have to format the drive and setup the RAID type you want from the disk utility.
To have some security i suggest the "mirror" options but you are going to lose some perfomance, depending you want is your main job it mighn't be noticed.
RAID 5:
This would be the nicest option but you need to buy an additional RAID controller. This is mostly used on servers and not on client computers.

What is the best way to set up iTunes to deal with a massive media library?

I have a really big media library...probably 7k-10k digital photos, close to 1,000 ripped CDs, and over 600 ripped DVDs, all stored on 1.5TB external hard disks in a 4-drive enclosure.
Due to a recent technical glitch, I find myself installing a new drive and moving the current library. My question is, what is the best way to set up iTunes' settings to deal with a media library that is both external to the Mac on which it runs, and spans multiple physical hard disk units?
I generally like the idea of iTunes organizing my library for me (i.e. keeping everything in Media Type>Artist>Album folders via the "Automatically Add to iTunes" folder), but I'm not sure how that's going to work spanning multiple drives.
I just figure since I'm basically starting over with my iTunes installation, maybe there's a better way to do it.
Thanks in advance for any advice you can offer.

You can set them up as a software RAID using Disk Utility.
It'll simply be one large disk for all intents and purposes.

Best way to set up my iPhoto library with 2 logins?

Hello, I'm new to Mac- so I'm still learning how this works. We just got a new iMac with iPhoto 11 on it.
Now both me and my wife have our profiles for our own email/contacts/messaging etc.
Previously with windows, we had an external HD with all our photos organized by year/month in folders. We used picasa to sort through the photos, do the touch ups/cropping then upload them to the good ol' interwebs.
Additionally, we each had our own folder of pictures (desktops, screen savers, favorites) in our pictures folders on our own desktops.
Picasa was easy to direct to the shared external HD, and our personnal pictures were not. (my wife didn't like sorting though my bike pictures, nor me her flower pictures)
1. SO now, I've set up our 'Photo Album' in the shared folder on the iMac. Set up the permissions so we can both write to that folder. Will there be any issues if we both want to access those shared photo files via iPhoto?
2. When she is logged in, she see's my personnal photos. If we delete the photos from iPhoto under her profile, will they (the files) be deleted from my peronnal folder (which is in my pictures folder in 'my files')
3. Can we manage our personnal photos in iPhoto without the other having to see them? Different libraries? *I have downloaded and installed iphoto manager.
4. Does iPhoto work like picasa : If I move picture files from one folder to another, is the move reflected in iPhoto - Do those photos now appear in a new event?
5. With windows, when I imported photos, I had it set up automattically to copy the files to the external HD- then I would rename that folder with the year/month. I know if I import photos to iPhoto, they will show up and they can be managed in iPhoto. (here's where the other tread got long winded) As a new iOS user, this is hard to get my head around. I like to see the new files in the folder along side all my other files. Is there an easy way to do this?

1. SO now, I've set up our 'Photo Album' in the shared folder on the iMac. Set up the permissions so we can both write to that folder. Will there be any issues if we both want to access those shared photo files via iPhoto?
Only one user can access the Library at a time. SOme folks find permissions issues with the Library in the Shared folder. If you do, move it to an external disk formatted Mac OS Extended (Journaled) and set to ignore permissions.
2. When she is logged in, she see's my personnal photos. If we delete the photos from iPhoto under her profile, will they (the files) be deleted from my peronnal folder (which is in my pictures folder in 'my files')
If you're using the same library then deleting by one deletes for everyone.
3. Can we manage our personnal photos in iPhoto without the other having to see them? Different libraries? *I have downloaded and installed iphoto manager.
Different Libraries are the way to go.
4. Does iPhoto work like picasa : If I move picture files from one folder to another, is the move reflected in iPhoto - Do those photos now appear in a new event?
No.
Picasa is a hybrid file/photo manager. iPhoto is a Photo Manager. The entire point is that you import the files to iPhoto and then never bother with them again. All your work is then done in the iPhoto Window or via iPhoto. You never access the files via the Finder.
Moving files around in the Finder risks corrupting the Library.
Moving Photos around in the iPhoto Window has no bearing on where the files on the HD are. It really doesn't matter, as you never access them via the Finder. it's all done via iPhoto.
Best way to think of it: Contacts manages and makes all your email, postal addresses and phone numbers available to you in every application. iPhoto does that for your Photos- but you wouln't try and change your Addressbook outside of the Contacts application, neither would you do this with your photos.
Regards
TD

Best Way to Set up Wired and Wireless with Junction Box

I have searched but not found my exact situation. I have a cable modem in a junction box in the laundry room. I have wired ethernet access in three rooms. I would like to set up a wireless network. If I use a WRTG54 wireless router inside the junction box, what kind of wireless signal would I get? This would be the easiest, but I don't know how good the signal would be with the wireless router mounted inside the box.
My second option would be to have someone wire another phone outlet somewhere in the house and use a wireless access point at that location (I already have a WAP I can use).
The third option is to use a regular router in the junction box and then use a wireless router in one of the three rooms, which would be wired to one computer and also serve as the wireless access point. Does this work?
Thanks for any assistance.

You can set-up your wrt54g router along with your modem and use an access point(wap54g) in repeater mode and use it to connect all the wireless devices across your home...

What is the best way to set up my time capsule with Existing Uverse

Hello,
I have read through some of the threads regarding the co-existence of Uverse and a time capsule. But it all seems very advanced to me. Here is what I'm wanting to do.
I currently have Uverse. I have the box in my living room attached to a wall outlet, via Ethernet. I have 3 TVs, all with Uverse boxes. Wirelessly, I have several devices connected to the Wifi at any given time. An iMac, 2 iPads, a MacBook Air, 3 iPhones, Apple TV, an XBox and 2 smart TVs.
So my Uverse Wifi pretty much stinks. It's not bad right in the livingroom where the box is, but in my bedroom and office it's pretty poor. When I try to watch Apple TV in the bedroom I end up watching a lot of spinning as it waits to connect:(
I was told at the Apple Store that a time capsule could help with that in addition to creating a back up of my computers. Excellent! So I purchased it. But here is my issue. My main iMac, the newest computer with the most up to date software, is in my office. But my Uverse equipment is in the living room with the TV. So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule? Because they are rooms away from each other:( Is ther any way someone can take me through this step by step like setup for dummies?:) I would be so grateful!
Thanks!!

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

What is the best way to set up one family imac with multiple iphones?

We basically have one imac that we all use (one user account).
We also have our own iphones with our own apple id.
What i would like to get my head around is setting up each iphone individually to use itunes.(i.e music, videos, contacts).
It seems that every time i sync/ update iphone os, via itunes, apps and contacts change. Also today i only just got around to update one of the iphones to ios5. Now all the photos have been deleted???
I would be grateful of any advice, cheers.
Kev.

Here are three different methods >
How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
This article > iOS: How to transfer or sync content to your computer, http://support.apple.com/kb/HT1296
suggests using contacts groups.
When syncing contacts, you can choose to sync all of your contacts or only selected groups.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
You can set up groups in the Address Book application.
If you are all going to use the same iTunes apps library, turn off "Automatically sync new apps" in the apps tab just below the list of apps. Then you won't get new apps on your device unless you select them.

CS4 - Is there a way to adjust gamma for second monitor or send to overlay?

One thing that is evident when I edit in Premiere CS4 using the AVCHD 1080i 60 template is that the preview in the second monitor, which in my case is my TV set connected using a DVI to HDMI cable, is that the output is too dark compared to what it should be. Darker areas of the frame sometimes even get crushed into black when the same footage, when played directly from the camcorder, or even burned to blu-ray and played, is noticeably brighter and at the right black levels.
This doesn't happen when editing in Vegas Pro 8, or when the untouched footage is played through other video player, including Windows 7 Media Center.
A workaround for this problem can be to go to the graphics card control panel, in my case ATI Catalyst, and adjust the gamma for the second monitor, with the problem being that when you're done editing in Premiere you have to go back to the normal gamma. At one point I had setup two profiles in Catalyst with shortcuts and it worked well, but one day Catalyst simply lost the profiles and noticing how buggy it was I wasn't going to keep creating profiles so that Catalyst would delete them.
So my question is, since it's not in the preferences, is there some settings file or registry address that I can tweak to make Premiere display a brighter gamma of my choice?
And this may be a dead end, but is there a way to send the output of the second monitor to the overlay so that it can take advantage of the graphic's card video capabilities and display video smoothly? It's nice to have a preview of the timeline, but it's rather annoying if I have to go to the Catalyst control panel and adjust gamma before editing and after editing and that motion is jerky and not interlaced when I'm editing interlaced content.

You need the VESA mount option. That way your minimum angle would be completely vertical and you could open it to a negative 10 degrees.
Hope this helps.
Pete
I am not an HP employee, But I did stay at a Holiday Inn Express last night.
TouchSmart IQ526t CTO Intel 2.26 Ghz 4 gig ram 750 gig HDD Vista Premium 64 bit

Best way to set up or migrate to a new Mac?

Briefly, the best way to set up my new iMac (which arrives shortly) and transfer my accounts, files, etc. from my older iMac (intel OS X, 10.6.7).
I have a time machine back up external hard drive connected via fire wire.
I don't have a second firewire cable but would buy one if it helps.
I have an extra ethernet cable.
I use an ATT Uverse router as my network hub.
Ideally. I want to transfer all settings EXCEPT for a dozen downloaded applications that I no longer want. If I can't pick and choose applications to transfer, then I will re-download them onto the new machine.
What would you recommend?
1. Using Set-up assistant on the new machine? If so, do I physically connect the two machines before powering on the new one?
2. Using Migration assistant after getting the new machine powered up? If so, does it matter if I use mig/asst on the new machine and choose transfer files 'from another Mac' or use mig/asst on the old machine and choose transfer files 'to another Mac'?
In short, given these facts about my situation, what might be the better way to proceed?
Thank you!

Just to second what NewMac1 says, the link to Setup assistant tips (above) doesn't work. Can someone please provide new link? thanks.
It links to a mobile me address, maybe the website was hosted on MobileMe before it closed earlier this year?

Advice on best way to set up 500 GB external hard-drive - scratch & back-up

Hi all -
I would like to get some advice on how to best set up my new 500GB external hard drive. I do lots of video editing, so my primary use for it is as a scratch disc. However, i like to have a back-up clone for emergencies so in the past I have always had a partitioned external. One for back up, one for media. Now that Leopard has the time machine feature, i have read that some people like to use one volume on their external for TM and the other for a bootable clone (using Carbon Copy cloner). Doing this will take up a lot of space on my hard drive and I really need it for media storage. Does anyone have any suggestions on the best way to set this up? If I had a clone on one volume, could i then put Time Machine on my Media volume and call it a day?
Thanks so much for any feedback!
Karen

You've essentially said that you're concerned about not having enough disk space for everything you do. I suggest a 2nd drive, as there is no partitioning scheme that's going to create more space for you. I'd set up one drive with 2 partitions - a bootable partition and a partition for TM. I'd dedicate the second drive to media. I wouldn't put TM and media on the same partition; in time <grin>, Time Machine will fill the partition.
And by the way, imho you should turn TM off anytime you are capturing, rendering or exporting; you don't want it using system resources (CPU, RAM or I/O) while you're doing those tasks.

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

What Is The Best Way To Set Up Kids iTouch To My iTunes?

I have an iTouch set up with my iTunes music, movies and apps, but now I gave my kids each an iTouch.
What is the best way to set up there account, should it be a unique account for each of them or should I put them under my account?
They will be using my same iMac when they sync or update there iTouch, so will they need to log in under their name every time?
Not sure what is the best way to set this up, they are both minors, i.e. no credit card.
Thanks

Better just your account for multiple devices. The only drawback is that the music will have to managed manually.
Connect one of the iPods to your computer then launch iTunes. You should see the iPod under Devices on the left side of the iTunes window. Double click then you can name each iPod to keep them separate but only syncs to your iTunes account.
Without knowing your Apple ID user name and password they would not be able to make purchases ergo no downloads you aren't aware of.
How to use multiple iPods, iPads, or iPhones with one computer
The kids are minors.. if they are under 13 years of age, according to Apple, they can't have their own accounts regardless.
http://www.apple.com/legal/itunes/us/terms.html#GIFTS

Best way to set up a second monitor with a Touchsmart

Similar Messages

Maybe you are looking for