Bex - Use of Variable for multiple results

Hello guys, I need to create a query in Bex with this structure:
Rows:
- 0FISCPER
Columns: Restricted Key Figure
- 0AMOUNT
- 0PSTN_DATE (filtered by a variable having the last day of each 0FISCPER).
I don't know how to give logic to the user exit variable to determine the last day of each 0FISCPER in the rows. I've done similar variables with only one possible value as result, but this is a new scenario for me.
Is this possible to be done?
thanks in advance,
Mariano.

Hi Mariano
I think that you have tu use the Function Module 'LAST_DAY_IN_PERIOD_GET ' this module will take Fiscal Year, Fiscal Year Variant and Period as input, and it will give the last day/date of that Fiscal year period
The step by step will this:
1) create an exit variable with opcion processing by Customer Exit
2) If you need create also a variable for user input and make reference to variable with customer exit. If this is not the case forget this step.
3) Goto CMOD TCode in SAP-BW/BI and then give your Project Name and click on Change button.
4) Click on Components
5) Double Click on INCLUDE ZXRSRU01.
6) there you have to write de abap code using the CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
If you need i can write you in spanish.
Hope this helps
Natalia.

Similar Messages

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

Shall I use one datasource for multiple connection pool?

Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
Suresh

No. If its transactions across multiple databases you should use different datasources.

How to use data function using characterstics variable for calculation on

how to use data function using characterstics variable for calculation on attribute as key figure

Hi Gayatri
Did you not see my answer for CASE because CASE does indeed offer the use of the BETWEEN clause, but DECODE does not. Let me give you a little synopsis of DECODE.
In its most simple form it takes 4 values and looks like this: DECODE(A, B, C, D)
This essentially means, IF A = B THEN C ELSE D
The trick to solving BETWEEN in a DECODE is to work out algoriths where A = B. Because we don't know how many values are between 00 and 99, although I could guess there were 100 we could of course have 100 parts in the DECODE but that would be awful. How about if we look at it another way and say this:
IF PART_NUMBER < 'SDK00' THEN pay_amount
ELSE IF PART_NUMBER > 'SDK99' THEN pay_AMOUNT
ELSE pay_amount + 100
This statement only had 2 hard coded values, but how to make DECODE work with less than? Easy, we use the LEAST function. The LEAST function takes 2 values and returns the one with the lowest value. So I use LEAST(PART_NUMBER, 'SDK00') then whenever the PART_NUMBER is lower than SDK00 it will be true. A similar situation exists for the opposite function GREATEST. Putting all of this together then, you can do this:
DECODE(PART_NUMBER, GREATEST(PART_NUMBER, 'SDK00'), DECODE(PART_NUMBER, LEAST(PART_NUMBER, 'SDK99'), PAY_AMOUNT * 100, PAY_AMOUNT), PAY_AMOUNT)
In English this can be read as follows:
IF the PART_NUMBER is greater than or equal to SDK00 and the PART_NUMBER is less than or equal to SDK99 THEN PAY_AMOUNT x 100 ELSE 0
Best wishes
Michael

Use a variable for the integer in Fmt offset modifier

I'm trying to pluck values out of a long array of comma separated string
values.
I'm doing this within a loop and would like to use the loop interation to
point to the starting point in the array.
Here's what I have working so far:
Fmt (scratch,"%s<%s[i0t44]",transmitBuf);
Works great.
Now if I go in and change i0 to i3 then my modifier doesn't start looking
for a comma "," until after the 3rd character. Still working great. However....
If I try to use an integer called "loop" instead of the literal offset
value it blows up:
Fmt (scratch,"%s<%s[iloopt44]",transmitBuf);
Is there a way that I can use a variable for the integer portion of the
offset modifer?
Thanks All!

Hi Roberto
Thank you. I actually need to use a symbolic value for the interger section of the modifer vs. the specifier.
So, in my example:
Fmt (scratch,"%s<%s[i0t44]",transmitBuf);
I want to make the following substitution (Assume z=0)
Fmt (scratch,"%s<%s[izt44]",transmitBuf);
Some background...
I'm looking to loop index through a long CSV string array (transmitBuf) that looks like this:
1,PEEP,7,6,,,21,20,
So on my first loop when I use the following:
Fmt (scratch,"%s<%s[i0t44]",transmitBuf);
scratch = "1"
... Perfect. I now do a string length of scratch (which equals 1)
and add 1 to it, I'm ready for my next loop which would
literally read like this:
Fmt (scratch,"%s<%s[i2t44]",transmitBuf);
However, I want to put this inside a loop, so I would like to
increment a variable (++z) and use the following:
Fmt (scratch,"%s<%s[izt44]",transmitBuf); ---- Ka-Boom!
So it's the use of the variable in the modifer that blows up
the Fmt command.
appreciate any thoughts...
Thanks
Mark

How can I use a variable for an interface log and error fle

I want to use a variable for the interface's log and error file so that when I migrate from Dev to QA to Prod I don't have to do a lot of editing.
Specifically on the "flow" tab for the "target", I want a variable to be the first part of the path for the log (\\sundev1\fnd1-hypd1) and join this with the rest (\update\log\logfile.log) within the LOG_FILE_NAME field.
Thank you!

Hi,
It is quite simple....
just use the <%=odiRef.getSchemaName("D")%> before the file name and configure both path in the topology linked to each context.

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Passing argument to, when using one class for multiple assets

I had a class that I was passing a simple argument to like so:
var quiz_1_2:CaseStudyQuiz = new CaseStudyQuiz(2);
addChild(quiz_1_2);
I now would like to use this class for multiple MCs in my library. I thought I could let Flash create a class for each of them and specifying the CaseStudyQuiz class as the Base class. When I do that, I get the following error:
1136: Incorrect number of arguments. Expected 0.
Obviously this is because the class created by flash does not except an argument. Does that mean, I would have to create a seperate class for each of the movies that use that class? And if so, what would I have to do in that class for it to except the parameter and pass it on to my base class?
Thank you very much for any help with this!!!

use the super() function and pass your parameter. but you still might get a runtime error but i don't think that will cause a problem.

Using a variable for two different characteristic

Hello
I've to following situation:
1) While execuring a query in BEx Analyzer, the user should manually enter a specific key date KEY_DATE
2) Then, two InfoObjects should be restricted by using that KEY_DATE as follows
     a) InfoObject BEG_DATE <= KEY_DATE
     b) InfoObject END_DATE > KEY_DATE
So, in Query Designer I've created a variable KEY_DATE and added it to each of the above InfoObjects. Now, while executing the query I get an error: "Variable KEY_DATE is used for two different characteristics".
Is there another possibility to realize my requirements?

Hi Dear,
         create variable for that date and restrict the char. info object by that date.
-->create a variable of date char.
-->in General tab, select processing by Replacement path
-->in replacement path , offset 0 and lenght 0
-->ok
when u restrict, select value ranges and select greater than for one and less than equal for another
try and let me know if any probm...
Regards
Obaid

Report script - using substitution variable with multiple values

Hi All,
Substitution variable with multiple values is not working correctly with Report scripts. Can you please let me know what is the syntax to assign multiple values to a sub variable using maxl:
alter database samp.samp set variable 'ExtractQuarter' 'Q1,Q2,Q3,Q4';
alter database Samp.Samp set variable 'ExtractQuarter' 'Q1:Q4';
I tried both of the above but they are errored out with the below error:
Error: 1001005 - Unknown Member [Q1:Q4] in Report.
my requirement is different for both Actual and forecast data extract so i would like to make use of this variable to extract whole year data for Forecast and current quarter data for Actual with out duplicating the report scripts for both processes.
Thanks,
PRaveen

Hi,
Please refer following thread,
range of months in report script?
Hope it helps.
Regards

Use 1 listener for multiple database in a server

hi guys,
just want to check whether this is the right way to configure my Listener.ORA . I am using 1 listener.ora to listen for incoming request connection from remote client. There are multiple databases installed in a server.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora03)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = O11R2)
(ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
(SID_NAME = O11R2)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = O10G)
(ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
(SID_NAME = O10G)
)sorry i am reading about it so did not install another database to test out. Just thinking in the line that it mention that the list of SID is refering to the multiple database that is installed in a server and i am using 1 listener.
Please further advice.

Shivananda Rao wrote:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora03)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = O11R2)
(ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
(SID_NAME = O11R2)
(SID_DESC =
(GLOBAL_DBNAME = O10G)
(ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
(SID_NAME = O10G)
)Please use as above. You can have one listener for multiple databases.right right so it the pattern goes like this:
SID_LIST_LISTENER =
     (SID_LIST =
          (SID_DESC =
          (GLOBAL_DBNAME = AAAA)
          (ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
          (SID_NAME = AAAA)
          (SID_DESC =
          (GLOBAL_DBNAME = BBBB)
          (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
          (SID_NAME = BBBB)
     )thanks !

How do I use same MDB for multiple Queues? Deployment ?

          Here is what I am trying to do
          I have written one MDB that I want to use for multiple queues. I have seen posting
          mentioning that code a new weblogic-ejb-jar.xml to define other queues as the
          solution.
          Is there any other work around?
          I want to add queues in future as and when needed. I don't want to modify the
          already deployed jar to replace it with new weblogic-ejb-jar.xml everytime I have
          to add another queue for the message-driven-bean. Is is possible to use some kind
          of reference tag and just put weblogic-ejb-jar.xml in a new jar file and deply
          that every time I have a new queue to use for this MDB ( I don't think so, but
          again ???).
          Any help would be greatly appreciated.
          Chris


Sorry -- that's the only solution for now.
          greg
          "Chris" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Here is what I am trying to do
          >
          > I have written one MDB that I want to use for multiple queues. I have seen
          posting
          > mentioning that code a new weblogic-ejb-jar.xml to define other queues as
          the
          > solution.
          >
          > Is there any other work around?
          >
          > I want to add queues in future as and when needed. I don't want to modify
          the
          > already deployed jar to replace it with new weblogic-ejb-jar.xml everytime
          I have
          > to add another queue for the message-driven-bean. Is is possible to use
          some kind
          > of reference tag and just put weblogic-ejb-jar.xml in a new jar file and
          deply
          > that every time I have a new queue to use for this MDB ( I don't think so,
          but
          > again ???).
          >
          > Any help would be greatly appreciated.
          >
          > Chris

Using one library for multiple computers and accounts (not store accounts)

Okay, we currently have four macs in the house. One was recently bought: i7 iMac (late 2009), another is dying: (mid 2005 iMac), another is going somewhere else: (late 2006 iMac) and another is a laptop: C2D MBP (late 2008). We might add another computer into the mix some time later.
Anyway, what I want to do is have one iTunes library which all of the computers can access (even guest's/friend's computers). We have a Time Capsule, and as I have heard one can make the TC the HDD for the iTunes library, I thought it best for it to be there.
The only thing is, how can each computer (and the possible multiple accounts) each access the same library, without duplicating and messing anything up? Is that possible? If it is too hard for multiple computers to do this, I would still want the (late 2009) iMac to be able to use the same library for the two accounts on it.
Thanks.

Make sure everything you want to share is on the centralized drive (music, video, and books, but if any of you have mobile devices, keep the apps on your local drive). Mount the drive on your computer. (Remember, from now on you must do this before starting iTunes.) If iTunes isn't running, start it now.
At the moment iTunes thinks the library is on the local computer and has all the music on it so that has to be changed. Click on Music in the left window pane, select all, and delete. This deletes all the music from the library and, if you choose, from the computer too. (Until you are sure this set-up is to your liking, don't delete the music from the drive.) Now go to Preferences and select the Advanced tab. Set iTunes to look at the music folder on your shared drive. And finally, select File>Add to Library to repopulate your iTunes library. This could take a while if you have a large music collection.
Since you changed the music location, anything that is added to one person's library will be saved onto the shared drive so it isn't too much of a hassle to manually add music. You'll have to rebuild playlists which is a minor hassle but it’s a one time deal.

Use Redis Cache for Multiple Applications

Hi,
I did some searches and could not come up with a straight forward answer so I am hoping someone here can clarify this for me.
We have two different products that we have built in .NET that we host in Azure as websites. For each of these two products we have multiple clients. Each product and client pair has its own SQL database and its own website setup in Azure.
We would like to start using Redis Cache for the session of these products. Do I need to:
1) Create 1 Redis Cache and use it for all clients / products?
2) Create 2 Redis Caches and use one per product (redis caches needed = # of products)?
3) Create an individual Redis cache for each client / product pair (redis caches needed = # of products x # of clients)?

You can do either of the above. It would really depend on how much load are you expecting on the Cache
For separation and load balancing it might be better to have a Cache per Website
For a Cache to be useful it should be closer to the Web tier, so ensure that you provision the Cache in the same region as the Website.

Using a variable for STS Planning Sequence

Hi guys,
I would like to execute planning sequence when users approves data for Profit Center in STS. The filter used in the planning sequence have a variable for Profit Center. This is not working.
Whats the altenative of using a variable Instead of creating planning sequence for every profit center? Pls assist

The planning sequence runs when the user approves on STS. The planning sequence runs for all profit center (this is a variable in the filter). I want to execute planning sequence for the profit center level selected on STS.

Bex - Use of Variable for multiple results

Similar Messages

Maybe you are looking for