BGP Failover options in my design?

Hi Team,
i (Company Z) learning BGP routes from my Client A from two places on my two seperate Data Center Routers. i need to redistribute those routes into my internal MPLS.
currently i am doing manually statically redistributing all BGP routes from Primary BGP routes into my MPLS cloud and in case Primary BGP with Client A fails i manually remove all routes and start redistributing same routes from my Backup data center into my MPLS cloud.
What are my options to make it auto failover . any suggestions?
Attached is diagram for illustration, any sort of hints would be welcomed.

hi there
how the routers in each DC connected to the MPLS cloud learn company A routes ? is it via ibgp or you have static route pointing to the edge router that use ebgp with company A in each DC ?
if the later is the case then you can keep redistribute the static routes but by using ios object tracking where you can track peer availability or a route in the routing table
for example you can advertise a dummy route from the primary data center over the MPLS cloud to be received by the backup DC router over the MPLS link
in the back DC router you can watch this route, once these route disappeared from the routing table a track can be brought to up state that is associated with static route of company A and then they will be redistributed into BGP over the MPLS
this can autoomate what are you doing manulay
see these links that cloud help you
https://supportforums.cisco.com/message/3425580#3425580
http://blog.ioshints.info/2007/08/install-static-route-when-ip-address-is.html
http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html
hope this help

Similar Messages

Search option in masthead design

Hi all.
How can we place the toolarea search option in masthead design so that the search option works well ? I want to place this in place of branding image.

Hello Neil,
I think this problem was solved in this toppic:
/thread/81725 [original link is broken].
Regards
Gregor

No security tab in form options of Adobe designer

Hi, I am new at using Adobe designer in a SAP netweaver environnement.
I have a problem because I cannot set the security options in the designer because I have not got the security tab in the options.
Has this ever happened to any of you ?
I have allready serched the forums but have not found anything related to this issue.
Thanks in advance,
Nicolas.

Hi Nicolas
this is information you need to set on the SAP side of the integrated solution.
In Web Dynpro for Java, one of the properties of the InteractiveForm UI element is 'enabled', which by default is set to 'true', i.e. by default it generates an interactive PDF form.
In transaction SFP in ABAP, the form interface contains a property called 'fillable', which is disabled by default (because the transaction was built with a focus on high-volume printing requirements), and needs to be set in your program if you want to generate an interactive form.
All this is described really well in the documentation, for example, for NW 2004s: http://help.sap.com/saphelp_nw04s/helpdata/en/37/47a2be350c4ac8afe36b691203971f/frameset.htm
Remember, the form generation in SAP happens on the server (ADS), not in Acrobat.
Hope this helps,
Markus

Oracle Failover options with HACMP

Hi,
I’ve been involved in projects that require different failover options for the Oracle Database including RAC, Dataguard, RMAN, etc. However, I recently embarked on some uncharted territory for me. I am working with a team that would like to use HACMP to failover the database.
Given the high cost of hardware, it seems to me that having an LPAR sitting around doing nothing except waiting for a catastrophe is a bit silly. I would much rather put that standby server to use by setting up RAC. That way, there is instantaneous failover and you can use the node for work. Slightly cheaper for licensing, we could use Active Dataguard.
Does anyone out there have any compelling advantages to using HACMP for failover instead of RAC/DG?

While I generally prefer the Oracle failover options, HACMP can be a reasonable option
- You don't have to pay for RAC licenses, which can be significant
- Assuming you have multiple databases, you can configure things so that LPAR A runs database 1 and LPAR B runs database 2 normally and the other database can fail over to the other LPAR if one LPAR fails. Of course, this isn't instantaneous, and both databases will probably run more slowly, but that may well be acceptable.
- You could have a DataGuard instance for database 1 on LPAR B and a DataGuard instance for database 2 on LPAR A, but applying archive logs on the standby database during normal operations would potentially affect the performance of the live instance.
Justin

Duplex Printing options in Livecycle Designer ES

Hi all,
I am new to using Adobe Livecycle Designer ES 8.2.
Issues 1:
What are options available to print “Duplex Flip Long Edge” and “Duplex Flip Short Edge”.
I have tried the following options
File + Form Properties + PDF print options + “Selected Duplex Flip Short Edge. It has worked fine if I print from Designer itself to the particular printer.
Through the program I have created XDP to PS file. It won’t print in “Duplex Short Edge option”.
It has always printed in “Duplex Flip Long Edge”.
Any one can help me… Thanks in advance….
Regards,
Jayakumar S

Hello all
The problem is still actual. There are some ideas on this forum about solution for LiveCycle Desginer 6.x and 7.x via JavaScript and via settings (Form Properties->PDF print options). The both don't work in LiveCycle Designer 8.2. Is it a bug of 8.2 version?
I have noticed that property <pagination> in XML source has always value duplexLongEdge. It doesn't depend on value you entered in Form Properties->PDF print options. May be it's a reason? However I cannot change this value to duplexShortEdge.
Regards,
Andrey

Best export option for Sound Designer

Hi everyone,
I am working on a new short film and I am working with a Sound Designer and composer. We want to create a 5.1 mix for the film (which I have never done before). So I am trying to figure out what would be the best export option for him to work with to make his life easier.
Providing him with just a ProRes export won't help him match up to my cuts in the time line since he doesn't use FCP X. So my thought is that we will have matching files and folder structure for both video and audio before I start editing. But what I am not understanding is once I have a complete rough cut, how do I get him a cut list so that he can totally match up my cuts with the same audio files on his system?
Any advice?
Thanks.

See this pic for an example of how my exports turn out:
http://www.brettmichaelwiesman.com/temp/qtexport.jpg
First off, the titling style is not ideal for DV (or DVD). That is, your font should be a bit fatter (or, at least, bold) and perhaps 1-2 point sizes larger. (This is all because the DV codec makes titles look like s--t if the font size is small and narrow)
Also, for your LiveType files, make sure FCP is interpreting your alpha channel correctly. For every LiveType file placed in your timeline, select it, then press Command-9 to bring up the Item Properties dialog. In the column for Alpha, make sure it says it says Black. If, for instance, it reads Straight, Control-click [right-click] on Straight, then select Black from the contextual menu. You should notice your text 'popping out' a little more. You'll have to re-render, of course.
Also, in QuickTime Player, press Command-, (that's  + comma) to bring up QT's preferences. Make sure that the box for Use High Quality Video Setting when available is checked. (In order to get this working, it's probably best to set this, then restart QT - or close, then open, all movies). With the High Quality flag always used, your titling should always look better in QT player. (That is, there is no change made to your actual file, but at least when previewing, you'll get a better idea of things)
After you've made these changes, export as you were (Current Settings) and let us know if you see any improvements.

Formula Options in Query Designer

Hi,
Can anyone please tell me while craeting a formula we have % option and %A option. Where do we use %A option?
Thanks

please go thr these threads
Percentage Share (%A)
● <Operand1> %A <Operand2>
This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 *
<Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision
by 0u201D if <Operand2> is equal to 0
Re: Margin%

My CS4 Design Standard disk is corrupt so I downloaded CS4 design premium from the website only to find it doesn't recognise my serial number. There doesn't appear to be an option to download Design Standard on the site, please help??

Where can I download CS$ design standard from as my disk is corrupt and on the Adobe site it only shows design premium and my serial number isnt recognised

Design Standard is available thru the following page in the Adobe site:
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Failover option(s) for remote site VPN

Currently, I have several remote VPN locations, in which most of them of ISDN dial backup in case the primary connection goes down. Can I use DSL/T1 circuit as a failover/dial backup link? If so, please point me to the right direction in finding documentations. Thank you.

As per your config, I guess you are referring to the VPN connectivity with Peer IP 166.149.125.81.
If yes than you have missed the other subnets of main site in the ACL outside_cryptomap_1
which have been mapped in the VPN with this Peer.
object-group network DM_INLINE_NETWORK_2
under this statement match the network-object with the subnets at main site that needs communication with the subnet 192.168.90.x/24 at remote site (same as you have done for 192.168.0.0/24 subnet)and vice versa.
BR
Please rate if this solve your problem.

Cannot find the "Import Designs" option in BPM Studio/JDev 11.1.1.3

Dear All,
I'm using JDeveloper 11.1.1.3 and the corresponding BPM studio.
I cannot see the option to "Import Designs" as described here:
How to import XPDL

You first need to first download the Oracle Business Process Converter by going to http://www.oracle.com/technetwork/middleware/bpm/downloads/downloads-097443.html
1. Sign in and accept the license agreement.
2. Expand "Prerequisites & Recommended Install Process"
3. Scroll down until you see "Oracle Business Process Converter" and download this.
4. From the downloaded file, save the tutor_bpm_integrator.zip file into a temporary directory somewhere on your hard drive.
Next you need to install it into your existing 11.1.1.5 JDeveloper installation
5. Open JDeveloper -> click Help -> click Check for Updates -> click the "Install From Local File" option and browse to the tutor_bpm_integrator.zip file you just saved -> click Next -> Finish.
Finally, to import the Visio vdx file
6. To insert the Visio vdx file into an Existing Project, in JDeveloper open an Application -> in the Appication Navigator tab right mouse click an existing project -> click Import Models... -> in the "File Type" dropdown, select Visio and browse for the .vdx file to open and import.
Hope this helps,
Dan

Scripting Preflight options In Design (CS4)

I'm trying to make a script that will install predefined Preflight options in In Design. This is my script till now :
tell application "Adobe InDesign CS4"
try
make new preflight profile with properties {name:"TEST"}
end try
tell preflight profile "TEST"
set description to "Preflight !!"
tell preflight rule instance "ADBE_MissingModifiedGraphics"
set flag to return as error
end tell
end tell
end tell
This gives the error : Adobe InDesign CS4 got an error: Preflight profile rule does not exist in the profile
Is there a way to avoid that? If i click on a preflight option in In Design it works fine after that. (But offcourse i want that automaticly done)
Jan Geerling

That script doesn't look right. My *guess* is that you need something like this: tell application "Adobe InDesign CS4" delete preflight profile 2 try make new preflight profile with properties {name:"TEST"} end try tell preflight profile "TEST" set description to "Preflight !!" set pri to make preflight rule instance with properties {id:"ADBE_MissingModifiedGraphics"} set flag of pri to return as error end tell end tell -- Shane Stanley <[email protected]> AppleScript Pro Sessions <a href=http://scriptingmatters.com/aspro>

No option for trial of design standard in download assistant

So I have clicked to download a trial of design standard. Information tells me it will automatically start my download, but I have to run the file myself and then I am given no option to download design standard only web and design premium and so on, I do not need any web stuff. I could download photoshop, illustrator and indesign seperately but will this cause problems when I want to buy the proffesional version ?
Also just as an aside complaint I would love to be able to pay for this software in incriments, I really want the proffessional version but don't have all the cash upfront to pay for it. Would be cool if you brought in an option for this.
Cheers

You will need to initiate a download of Design Standard directly from the trial page at http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard&loc=en_us. It will still use the Adobe Download Assistant but the download needs to be initiated by the page.

Office 365 : SharePoint designer workflow platform not available

Hi,
We have Office 365 E3 subscription and I am facing issue creating any SP2013 designer workflow for the sites created via Custom Web Templates ?
The option to create designer workflow with "SharePoint 2013 Workflow platform" is unavailable with message..
"The option for SharePoint 2013 Workflow platform is not available because the workflow service is not configured on the server, please contact your server administrator"
To add to the issue even if we create 2010 designer workflow, the workflow does not get associated with the list/library. I can see the workflow in SharePoint designer but not with library settings from the browser and of course the workflow is not executed.
Can anyone please suggest any solution ?
Thanks in advance.
Rajesh

Hi,
If you are a tenant administrator please log into your admin account
navigate to this "https://youraccount-admin.sharepoint.com/_layouts/15/online/TenantSettings.aspx"
In this page,under connected services, deselect the "Block
SharePoint 2013 workflows".
Murugesa Pandian.,SharePoint 2010, MCPD | MCTS - Configure

No Option for Printing Separations in Acrobat 11

I do not have the option to print separations from Acrobat Pro 11 on OSX Yosemite. I have installed the PPDs and they work in Illustrator and InDesign but do not work in Acrobat.
First, I am a designer at a screen printing shop and have been printing separations on a daily basis for 3 years. I understand how it works. I was working on a PC with CS 5.5. Typical workflow was to design in Illustrator, Print to PDF, open the PDF in Acrobat, save as EPS. EPS was the preferred method since I print the transparencies from Illustrator, and since Illustrator can only open one page of a PDF at a time, I saved the PDF as EPS so that ever spot color got it’s own EPS file. From there, I created a new AI file, put all EPS files on different art boards and printed.
Now I am on a Mac with Yosemite and CC 2014. I know the PDF workflow changed in Snow Leopard. You now have to print to a PostScript file and Distill, which then gives me the PDF i can open w Acrobat and save to EPS as usual.
But, I decided to really dig into Acrobat 11 since it has all the Ink Manager and Preflight features. My preferred workflow would be creation in AI, save a PDF, then use all of Acrobats features for the final check and separations. The Acrobat manual says on page 316:
“Print separations
1. Choose File > Print, and choose a printer.
2. Choose an option from the Comments and Forms menu.
3. Choose print range and page handling options.
4. Click Advanced.
5. If you created a custom printer settings file with the appropriate separation settings, choose it from the Settings menu at the top of the
Advanced Print Setup dialog box.
6. Select Output on the left, and choose an option from the Color menu:
Choose Separations if the PPD doesn’t support in-RIP separations.
12. Click PostScript Options on the left, and select settings as needed. Click OK to close the dialog box, and then click OK again to print the separations.”
The only option I have in the print dialog is my desktop printer.
I have installed the PPDs, which brings me to another problem.
On this forum
https://forums.adobe.com/message/6735474#6735474
the gives the link
http://www.adobe.com/support/downloads/detail.jsp?ftpID=141
which is the adobe.sit.hqx file that contains 5 files with no file extension. Per the “Read Me” instructions, I have placed the “Acrobat Distiller (no file extension)” file in the
Library/Printers: PPDs: Contents: Resources: folder.
It works with Illustrator, and is not really and issue.
-The file is a 17KB file with no extension that was last modified on 9/9/2001.
Following another page
http://helpx.adobe.com/x-productkb/multi/save-as-pdf-options-not.html#main_InstallAcroPPD
it give the link
Acrobat 9 PPD
which is the ADPDF9.PPD file, a 29 KB PPD file last modified on 12/8/2014.
Just to test it out, I placed both files in the
Library/Printers: PPDs: Contents: Resources: folder. Both are selectable from Illustrator when printing a PostScript file and both seem to work. I see no real difference between them.
I also created the PPDs file in the Presets folder of InDesign and can get separations from there as well.
But, I do not have the PostScript or any other print option from the Acrobat print dialog except for my desktop printer.
SO,
1) Is there somewhere else I need to place the PPDs for Acrobat to see it? The manual states I should be able to print the separations from the Print Dialog but its not available.
2) What is the difference between the “Acrobat Distiller” file and the “ADPDF9.PPD” files? Different size, different dates, but no obvious difference in output.
3) I sometimes print halftone jobs through AccuRip. I have gotten pretty good at manual spot color transparency gradients within illustrator, where I create complex gradients using only a spot color and a gradient with 100% transparency on one end and 0% on the other. But if I have many colors in it, I have to print separations through PotsScript and then Distill it, which flattens all transparency on the separated file. The result is a separation with a placed image gradient with a clipping mask instead of a true vector gradient. I know it has to be flattened when it’s ripped anyway, but I would like for it to ONLY get flattened as it passed through the rip on its way to the transparency, and not during the Distiller separation which then is placed back in AI for printing. Is there any way to do this on a Mac which MUST be printed to PostScript and Distilled?
Thanks

“I’ll never give you a job to print.”
Lead with an insult, good start.
You know, I read your comment, and the link, right before I went to bed. I thought I would respond then, but thought I should sleep on it. Well I slept on it, and I’m actually MORE p***ed off today than last night. I will try to keep this as professional as possible…
“Such an outdated time consuming workflow !!!”
No S**t (so much for professional). Which is why it’s unfortunate that Apple forced this workflow on people like me.
I asked SPECIFICALLY about color SEPARATIONS in the title of the post and throughout the post. The link you provided did not provide an answer to this. It explained how terrible “refrying” a PDF can be. And what was the solution it gave?
“Use EPS and not PostScript!”
Strange. it seems that is the EXACT workflow I listed! To quote myself;
“Typical workflow was to design in Illustrator, Print to PDF, open the PDF in Acrobat, save as EPS”
That was on a PC, where Print to PDF is still an option. The design is made in Illustrator with Spot Colors, all overprints are set, because a human will be lining up the screens to print by hand, and you need about .5 - 1 point of “play” for when the screen moves so abutting colors will not have a gap of shirt color between them. I can then use all of the functionality of the AI print dialog box and print the SEPARATIONS to a PDF file, and the PDF is then split to separate EPS files for easier control.
Apple in it’s infinite wisdom has taken away this functionality. From AI, my 2 listed printers are my desktop printer and an Adobe PostScript file. Remember, I am SEPARATING the artwork to be printed on vellums that will be used to burn a screen. If I leave my desktop printer active, I can select “Setup”, where i am brought to the system print dialog box, where if I select “Adobe PDF” or “Save as PDF”, I get the message from Illustrator that “The Save as PDF option in the Printer dialog box are not supported”.
So, if I change the Printer to “Adobe Postscript file”, the “Setup” box is greyed out. If I simple “Save As” and choose PDF, I do not have the option to SEPARATE colors. Do you see the dilemma now? Apple remove the functionality I have on a PC, so my SEPARATIONS can not be saved directly to a PDF, but MUST me “printed” to a Post Script file, which then MUST be distilled to get a PDF of SEPARATIONS.
Which brings me back to the whole point of my post.
““Such an outdated time consuming workflow !!!”
Right, which is why I’m trying to avoid it. In reality, the entire process only involves 1 extra step over the PC workflow, and the Distill process literally takes a few seconds. But, I don’t want to Distill for all the reasons listed in the link you provided. And if i follow the advice of the link, saving to EPS, I DO NOT have the option of SEPARATIONS. Which is why I’m trying to save a PDF from AI, the use all the functionality of Acrobat Pro to SEPARATE my colors. Again, the manual to Acrobat says I can print my SEPARATIONS to a file, but I only have the option to print to my desktop printer from the Acrobat Print Dialog box, even though I have DO have other options in AI and InDesign.
So, great Adobe MVP, can you answer my original questions?
1- why do I not have the option to print to a file in Acrobat Pro?
2- What is the difference between the “Acrobat Distiller” file and the “ADPDF9.PPD” files? Different size, different dates, but no obvious difference in output. (Not what I want to use, but on OSX post 10.6, I don’t really have a choice it seems)
3- Is there any way to print to a SEPARATION file on a Mac without printing to PostScript and then being Distilled?
I see your skills are:
“PDF forms, PDF multimedia, eBooks in PDF or in ePub format.
I'm an InDesign Digital Publishing Suite specialist too. I am also a trainer and the webmaster of abracadabraPDF.net, the only French web site dedicated to PDF and Acrobat.”
Good for you. Have you EVER had to print separations for a t-shirt? Have you ever had to consider that a person will be physically pushing the ink through a screen, so you must consider the thickness of the ink, how that will interact with the mesh of the screen, which determines the LPI the halftones are printed at, which determines how fine your gradients should be? Because I do it everyday. So your whole “I’ll never give you a job” thing is especially infuriating, and pretty unprofessional.
So not only have you totally ignored all my questions, you insulted me and given me a link that ALSO answers none of my questions. I am also assuming, though I could be wrong, that you marked your answer as correct int he AcrobatUsers forums. Well guess what? Even with you MVP badge, you are NOT correct. At least not for what I’m asking.
If I ever need an eBook, PDF form, ePub or Multimedia PDF done, maybe I’ll use you. But, I would never hire you for color separations for t-shirt printing.

Cell Definition in Query Designer

Hi,,
Can anyone will tell me the real time use of cell definition option in query designer.
Thanks and Regards.
Anjali

Anjali,
You can use cell definitions when you want to overwrite the value of a particular cell.
For this you need to have an identification of where the cell intersection takes place. So for defining cell definitions its mandatory to have two structures in the report.
Now coming to the scenario,
You have GL accounts in the rows structure and the key figures amount, deductions and some others.
Rows-----Amount--
Deductions
1001--20000--
100
1002--15456--
4363
1007--64334--
252
1005--36643--
34
1111--43436--
343
This is what the report displays for a particular year the user enters e.g 2007.
But for a GL account 1005 the user wants to display the amount for the last fours years.
The out put for amount for the GL account 1005 displays only 2007. The requirement is that it should display the summed up values of 2007,2006,2005,2004.
To get this out put we go for cell definitions and in the intersection of the 1005 GL account and amount we define a cell definition. Based upon the requirement we define the cell definition...
Hope this helps you.......

BGP Failover options in my design?

Similar Messages

Maybe you are looking for